Search NASA⌕ Search

SEARCH · Search NASA

Results for “inverse methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Validation of Inverse Methods Applied to Forensic Analysis of Spent Fuel

Inverse depletion/decay methods are useful tools for application to nuclear forensics. Previously, inverse methods were applied to the generic case of predicting the burnup, initial enrichment, and cooling time for selected spent nuclear fuels based on measured actinide and fission product concentrations. These existing measurements were not developed or optimized for use by these inverse techniques, and hence previous work demonstrated the prediction of only the fuel burnup, initial enrichment, and cooling time. Previously, nine spent fuel samples from an online data compilation were randomly selected for study. This work set out to demonstrate the full prediction capabilities using measured isotopic data, but with a more deliberate selection of fuel samples. The current approach is to evaluate nuclides within the same element to see if complementary information can be obtained in addition to the reactor burnup, enrichment, and cooling. Specifically, the reactor power and the fuel irradiation time values are desired to achieve the maximum prediction capabilities of these techniques.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A matrix-inversion method for gamma-source mapping from gamma-count data

In a previous paper it was proposed that a simple matrix inversion method could be used to extract source distributions from gamma-count maps, using simple models to calculate the response matrix. The method was tested using numerically generated count maps. In the present work a 100 kBq Co{sup 60} source has been placed on a gridded surface and the count rate measured using a NaI scintillation detector. The resulting map of gamma counts was used as input to the matrix inversion procedure and the source position recovered. A multi-source array was simulated by superposition of several single-source count maps and the source distribution was again recovered using matrix inversion. The measurements were performed for several detector heights. The effects of uncertainties in source-detector distances on the matrix inversion method are also examined. The results from this work give confidence in the application of the method to practical applications, such as the segregation of highly active objects amongst fuel-element debris. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Inverse methods for design of soft materials

Functional soft materials, comprising colloidal and molecular building blocks that self-organize into complex structures as a result of their tunable interactions, enable a wide array of technological applications. Inverse methods provide a systematic means for navigating their inherently high-dimensional design spaces to create materials with targeted properties. Furthermore, while multiple physically motivated inverse strategies have been successfully implemented in silico, their translation to guiding experimental materials discovery has thus far been limited to a handful of proof-of-concept studies. In this perspective, we discuss recent advances in inverse methods for design of soft materials that address two challenges: (1) methodological limitations that prevent such approaches from satisfying design constraints and (2) computational challenges that limit the size and complexity of systems that can be addressed. Strategies that leverage machine learning have proven particularly effective, including methods to discover order parameters that characterize complex structural motifs and schemes to efficiently compute macroscopic properties from the underlying structure. We also highlight promising opportunities to improve the experimental realizability of materials designed computationally, including discovery of materials with functionality at multiple thermodynamic states, design of externally directed assembly protocols that are simple to implement in experiments, and strategies to improve the accuracy and computational efficiency of experimentally relevant models.

36 MATERIALS SCIENCE↗

An inverse method for computation of structural stiffness distributions of aeroelastically optimized wings

An inverse method has been developed to compute the structural stiffness properties of wings given a specified wing loading and aeroelastic twist distribution. The method directly solves for the bending and torsional stiffness distribution of the wing using a modal representation of these properties. An aeroelastic design problem involving the use of a computational aerodynamics method to optimize the aeroelastic twist distribution of a tighter wing operating at maneuver flight conditions is used to demonstrate the application of the method. This exercise verifies the ability of the inverse scheme to accurately compute the structural stiffness distribution required to generate a specific aeroelastic twist under a specified aeroelastic load.

Schuster, David M.↗

A full potential inverse method based on a density linearization scheme for wing design

A mixed analysis inverse procedure based on the full potential equation in conservation form was developed to recontour a given base wing to produce density linearization scheme in applying the pressure boundary condition in terms of the velocity potential. The FL030 finite volume analysis code was modified to include the inverse option. The new surface shape information, associated with the modified pressure boundary condition, is calculated at a constant span station based on a mass flux integration. The inverse method is shown to recover the original shape when the analysis pressure is not altered. Inverse calculations for weakening of a strong shock system and for a laminar flow control (LFC) pressure distribution are presented. Two methods for a trailing edge closure model are proposed for further study.

Shankar, V.↗

Position Papers for Inverse Methods for Complex Systems under Uncertainty Workshop

The ability to solve inverse problems – inferring unknown parameters, structures, or states of a system from observed data – is essential for advancing scientific discovery and innovation capabilities for the DOE mission. Basic research needs and challenges are particularly acute in emerging areas such as the interactive, data-driven, modeling and simulation of digital twins; decision support for experiments at DOE scientific user facilities; and for other complex systems and workflows. Inverse problems are at the heart of understanding and controlling complex systems due to factors such as observational data with varying modalities and fidelities, inherent uncertainties in physical measurements and numerical models, and the computational demands of rapid and high-fidelity simulations. The convergence of recent scientific computing trends – scientific machine learning, artificial intelligence, and computing advances such as exascale computing – is creating unprecedented opportunities. These advancements offer the potential to revolutionize how we approach inverse problems to extract actionable insights with the required level of accuracy and computational efficiency. This workshop and the Call for Position Papers are vital steps in bringing together experts to collectively explore and identify the new computational and mathematical directions needed in inverse methods for complex systems under uncertainty.

97 MATHEMATICS AND COMPUTING↗

Use of Gas Adsorption and Inversion Methods for Shale Pore Structure Characterization

The analysis of porosity and pore structure of shale rocks has received special attention in the last decades as unconventional reservoir hydrocarbons have become a larger parcel of the oil and gas market. A variety of techniques are available to provide a satisfactory description of these porous media. Some techniques are based on saturating the porous rock with a fluid to probe the pore structure. In this sense, gases have played an important role in porosity and pore structure characterization, particularly for the analysis of pore size and shapes and storage or intake capacity. In this review, we discuss the use of various gases, with emphasis on N2 and CO2, for characterization of shale pore architecture. We describe the state of the art on the related inversion methods for processing the corresponding isotherms and the procedure to obtain surface area and pore-size distribution. The state of the art is based on the collation of publications in the last 10 years. Limitations of the gas adsorption technique and the associated inversion methods as well as the most suitable scenario for its application are presented in this review. Finally, we discuss the future of gas adsorption for shale characterization, which we believe will rely on hybridization with other techniques to overcome some of the limitations.

04 OIL SHALES AND TAR SANDS↗

An inverse method for subcritical flows

An exact method is presented for two-dimensional subsonic flow within the limitations of the tangent gas approximation. While Woods (1961) studied these equations and proposed iterative methods for the solution of both the iterative and inverse problems, the inverse method here presented is noniterative and exact. It is shown that the direct Euler solution over the designed airfoil is very close to the input speed distribution, and that the constraints necessitated by upstream condition and closure requirements are easily incorporated.

Daripa, P. K.↗

Inverse methods for assessing ship-of-opportunity networks and estimating circulation and winds from tropical expendable bathythermograph data

Inverse methods for estimating the surface ciculation of the equatorial Pacific by combining a linear reduced-gravity shallow-water model with the Tropical Ocean-Global Atmosphere ship-of-opportunity expendable bathythermograph (TOGA SOP XBT) observing program are examined. It is demonstrated that a simple linear model of the upper circulation of the equatorial Pacific can be successfully used as a weak constraint when smoothing the TOGA SOP XBT data. A circulation is sought as the weighted least squares fit to the dynamics and the data. The solution method is an expansion in representer functions, and the generalized inverse problem is thereby reduced from a functional problem to an algebraic problem for the coefficients of the representer. A specific inverse calculation using synthetic forcing and data is presented.

Bennett, Andrew F.↗

Towards an optimal inversion method for remote atmospheric sensing

The inference of atmospheric structure from satellite radiometric observations requires an inversion algorithm. A variety of techniques was spawned to meet these demands. One class, the nonlinear inversion methods, copes with the problem of data noise. Unlike linear techniques which require a priori data smoothing, the nonlinear method can be applied directly to raw data. The algorithm discriminates the noise input by resolving the inferences into two types of solution, associating the real roots with atmospheric structure while ascribing the imaginary roots to noise.

King, J. I. F.↗

Reconstruction of the primordial fluctuation spectrum from the five-year WMAP data by the cosmic inversion method with band-power decorrelation analysis

The primordial curvature fluctuation spectrum is reconstructed by the cosmic inversion method using the five-year Wilkinson Microwave Anisotropy Probe data of the cosmic microwave background temperature anisotropy. We apply the covariance matrix analysis and decompose the reconstructed spectrum into statistically independent band-powers. The statistically significant deviation from a simple power-law spectrum suggested by the analysis of the first-year data is not found in the five-year data except possibly at one point near the border of the wave number domain where accurate reconstruction is possible.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of non-solvent from the phase inversion method on the morphology and performance of the anode supported microtubular solid oxide fuel cells

The microstructure of the anode in anode-supported solid oxide fuel cells has significant influence on the cell performance. Here, microtubular Ni-yttria stabilized zircona (Zr 0.8 Y 0.2 O 2 , YSZ) anode support has been prepared by the phase inversion method. Different compositions of non-solvent have been used for the fabrication of the Ni-YSZ anode support, and the correlation between non-solvent composition and characteristics of the microstructure of the anode support has been investigated. The presence of ethanol or isopropanol in the non-solvent can inhibit the growth of the finger-like pores in the anode support. With the increase of the concentration of ethanol or isopropanol in the non-solvent, a thin dense layer can be observed on the top of the prepared tubular anode support. In addition, the mechanism of pore formation is explained based on the inter-diffusivity between the solvent and the non-solvent. Lastly, the prepared microtubular solid oxide fuel cells (MT-SOFCs) have been tested, and the influence of the anode microstructure on the cell electrochemical performance is analyzed based on a polarization model.

36 MATERIALS SCIENCE↗

A proposed through-flow inverse method for the design of mixed-flow pumps

A through-flow (hub-to-shroud) truly inverse method is proposed and described. It uses an imposition of mean swirl, i.e., radius times mean tangential velocity, given throughout the meridional section of the turbomachine as an initial design specification. In the present implementation, it is assumed that the fluid is inviscid, incompressible, and irrotational at inlet and that the blades are supposed to have zero thickness. Only blade rows that impart to the fluid a constant work along the space are considered. An application of this procedure to design the rotor of a mixed-flow pump is described in detail. The strategy used to find a suitable mean swirl distribution and the other design inputs is also described. The final blade shape and pressure distributions on the blade surface are presented, showing that it is possible to obtain feasible designs using this technique. Another advantage of this technique is the fact that it does not require large amounts of CPU time.

Borges, Joao Eduardo↗

The general circulation and meridional heat transport of the subtropical South Atlantic determined by inverse methods

The circulation and meridional heat transport of the subtropical South Atlantic Ocean are determined through the application of the inverse method of Wunsch (1978) to hydrographic data from the IGY and METEOR expeditions. Meridional circulation results of the two data sets agree on a northward mass transport of about 20 million metric tons/sec for waters above the North Atlantic Deep Water (NADW), and a comparable southward transport of deep waters. Additional gross features held in common are the Benguela, South Equatorial and North Brazilian Coastal currents' northward transport of the Surface Water, and the deflection of the southward-flowing NADW from the South American Coast into the mid ocean by a seamount chain near 20 deg S. Total heat transport is equatorward, with a magnitude of 0.8 X 10 to the 15th W near 30 deg S and indistinguishable from zero near 8 deg S.

Fu, L.-L.↗