Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Ion-ion waves in the auroral region - Wave excitation and ion heating

The properties of the ion-ion mode which is excited in plasmas when two or more cold ion beams are streaming relative to one another are investigated assuming a warm electron distribution at rest (the model consistent with particle distributions observed in auroral plasma cavities). Numerical solutions are derived for the generalized electrostatic dispersion equation for parallel propagation and for oblique propagation of ion waves. It is shown that the relative ion temperature and concentration have significant effects on the stability of the accelerated plasma and the expected ion heating. Finally, a relationship between ion drift and thermal speed is derived using the marginal stability of ion-ion waves for nonzero ion temperature; the relationship was found to compare favorably with DE-1 ion observations at the high-altitude boundary of the auroral cavity.

Dusenbery, P. B.↗
DOE OSTI2021

Cross-Beam Energy Transfer Saturation by Ion Heating

Cross-beam energy transfer (CBET) saturation by ion heating was measured in a gas-jet plasma characterized using Thomson scattering. Here, a wavelength-tunable ultraviolet (UV) probe laser beam was interacted with four intense UV pump beams to drive large-amplitude ion-acoustic waves. For the highest-intensity interactions, the power transferred to the probe laser dropped, demonstrating ion-acoustic wave saturation. Over this time, the ion temperature was measured to increase by a factor of 7 during the 500-ps interaction. Particle-in-cell simulations show ion trapping and a subsequent ion heating consistent with measurements. Linear kinetic CBET models were found to agree well with the observed energy transfer when the measured plasma conditions were used.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1988

Transverse ion heating in multicomponent plasmas along auroral zone field lines

This paper considers plasma modes that can occur in a multicomponent plasma, such as an O(+)-H(+) plasma, along auroral zone field lines and the effect of these plasma modes on heavy-ion acceleration. A simulation study of ion heating by ion cyclotron, lower hybrid, and ion-ion hybrid waves is conducted using parameters that pertain to different regions of the aurora. Three different auroral regions are identified, in which various types of heating occur; these regions are distinguished by the plasma conditions found there and by the instability that would be expected to be dominant in the ion-heating process. It is shown that, when a small amount of helium ions are added into the predominantly hydrogen and oxygen plasma, two ion-ion hybrid modes exist: hydrogen-helium and oxygen-helium modes (in addition to the lower hybrid mode). The effect of ion heating by these wave modes is discussed.

Ashour-Abdalla, Maha↗
NASA NTRS1987

Perpendicular ion heating effects on the refilling of the outer plasmasphere

This paper presents a theoretical model for the anisotropies of the thermal and superthermal ions observed along the field lines in the depleted plasmasphere. The model involves perpendicular ion heating by a low-level plasma turbulence extended along the field lines. It is shown that an extended background plasma noise with intensities of about 10 to the -11th V-squared/sq m per Hz near the ion cyclotron frequency (or near other characteristic frequencies at which ion interaction is possible) can trap the ions in the flux tubes without an appreciable energization. Such weakly heated ions can be effective in refilling the plasmasphere with cold plasmas having characteristic energies of about 1 eV. When the turbulence level exceeds the above level of noise, the heated ions show the features of the ion conics in the superthermal energy range observed along the field lines of refilling.

Singh, Nagendra↗
NASA NTRS1990

Ion heating by broadband low-frequency waves in the cusp/cleft

Ion heating via a cyclotron resonance process involving waves near the ion gyrofrequency is studied using data from two cusp/cleft crossings of the polar-orbiting DE 1 satellite. Observed cool O(+) distributions and wave intensities from one orbit are used as input to a Monte Carlo simulation. The results show that cyclotron resonance heating by broadband low-frequency waves can cause a major part of the ion heating observed in the cusp/cleft.

Andre, Mats↗
NASA NTRS1991

Chaos and ion heating in a slow shock

An ion heating mechanism is proposed of slow shocks, which is associated with the chaotic motion of particles in the downstream wave field. For a coherent electromagnetic wave propagating along the downstream magnetic field, corresponding to switch-off shocks, the particle motions are not chaotic. For an oblique wave, the interaction between the particles and the wave field may lead to chaotic particle motions. Such particles may be greatly thermalized within one wavelength after they are incident into the downstream wave field. The results can be used to explain the existence of the critical intermediate Mach number observed in the hybrid simulations.

Lin, Y.↗
NASA NTRS1992

Ion heating by kinetic cross-field streaming instability due to reflected ions at a quasiperpendicular shock

The present paper shows that the reflected ion at a supercritical quasi-perpendicular shock wave can excite a purely growing mode propagating parallel to the ambient magnetic field. To discuss the ion heating by such an unstable mode, the self-consistent quasi-linear kinetic equation is solved with the assumption that the present purely growing mode is the dominant unstable mode in the system. In the quasi-linear analysis of the instability, two particular cases are considered: the case of low initial ion beta and that of a high initial ion beta.

Yoon, Peter H.↗
NASA NTRS2008

Relationship Between Alfvenic Fluctuations and Heavy Ion Heating in the Cusp at 1 Re

We look at the effect of heavy ion heating from their coupling with observed broadband (BB-ELF) emissions. These wave fluctuations are common to many regions of the ionosphere and magnetosphere and have been described as spatial turbulence of dispersive Alfven waves (DAW) with short perpendicular wavelengths. With Polar passing through the cusp at 1 Re in the Spring of 1996, we show the correlation of their wave power with mass-resolved O+ derived heating rates. This relationship lead to the study of the coupling of the thermal O+ ions and these bursty electric fields. We demonstrate the role of these measurements in the suggestion of DAW and stochastic ion heating and the observed density cavity characteristics.

Coffey, Victoria↗
NASA NTRS1993

Numerical simulation of plasma processes driven by transverse ion heating

The plasma processes driven by transverse ion heating in a diverging flux tube are investigated with numerical simulation. The heating is found to drive a host of plasma processes, in addition to the well-known phenomenon of ion conics. The downward electric field near the reverse shock generates a doublestreaming situation consisting of two upflowing ion populations with different average flow velocities. The electric field in the reverse shock region is modulated by the ion-ion instability driven by the multistreaming ions. The oscillating fields in this region have the possibility of heating electrons. These results from the simulations are compared with results from a previous study based on a hydrodynamical model. Effects of spatial resolutions provided by simulations on the evolution of the plasma are discussed.

Singh, Nagendra↗
DOE OSTI2022

Cross-beam energy transfer saturation: ion heating and pump depletion

Cross-beam energy transfer (CBET) was measured in two regimes where the energy transfer saturation mechanism was determined by the plasma and laser beam conditions. Here, linear kinetic CBET theory agrees well with the measured energy transfer in all experimental configurations and at all probe beam intensities when accounting for pump depletion and the plasma conditions measured using Thomson-scattering. Simultaneous CBET and Thomson-scattering measurements enabled uncertainties in the plasma conditions to be isolated from CBET theory, which allowed the saturation mechanisms to be identified. In the perpendicular-beam configuration the saturation mode was through ion heating, which resulted from ion trapping in the driven waves and subsequent ion-ion collisional heating. In the co-propagating beam configuration there was minimal ion heating and the saturation mode was through pump depletion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Ion heating mechanism in a modified Penning discharge

Ions with Maxwellian energy distributions and kinetic temperatures ranging from 20 eV to 7 keV have been observed in a modified Penning discharge operating in the steady state. Investigation of the plasma revealed two distinct spoke-like concentrations of charge rotating with different velocities in the sheath between the plasma and the anode ring. The faster spoke consists of electrons rotating with the E/B drift velocity, where E is the electric field and B is the magnetic field strength. The slow spoke consists of ions, the thermal velocity of which is observed to be proportional to the spoke velocity. The experimental data are consistent with a model whereby the ion drift velocity in this spoke, corresponding to kilovolt ion energies, is Maxwellianized by strong electrostatic turbulence in the sheath. Theoretical expressions are derived for the frequency of the electron and ion spoke rotation, for the ion kinetic temperature, and for the ion heating efficiency as functions of the discharge parameters. These expressions are shown to be consistent with extensive experimental data.

Roth, J. R.↗
DOE OSTI2023

Plasma production and ion heating systems for the Material Plasma Exposure eXperiment

Plasma production and ion heating in the Material Plasma Exposure eXperiment (MPEX), whose design is nearing completion, is accomplished using continuous wave RF power with average power density up to 1.6 MW/m2 at the plasma interface. Plasma is produced using helicon waves coupled through a single helical antenna at 13.56 MHz with power supplied by three 100 kW fixed-frequency RF generators feeding a power combiner network followed by the matching network and launcher. The helicon source can utilize various gasses including hydrogen, deuterium, and helium, with a magnetic field strength in the source region up to 0.2 T, and maximum device |B| of 2.5 T. Power is coupled to ions via ion cyclotron heating at the fundamental resonance using a pair of phased helical antennas operating in the frequency range 4-9 MHz, that launch waves towards the resonance from the antenna region where ω > ωci. ICH power is supplied by a single 500 kW tunable RF transmitter through a 90° power splitter and matching/decoupling network. In the case of both the helicon and ICH systems the antennas are located external to the vacuum, with power transferred through novel water-cooled coaxial vacuum windows consisting of fused quartz outer cylinders and silicon nitride inner cylinders with forced convection water cooling between them. The antenna enclosures are pressurized with dry air to 3 bar absolute for voltage standoff.Several 3-D COMSOL models have been created to simulate the two systems. A model of the helicon region utilizing a cold plasma dielectric tensor with accurate magnetic field and realistic plasma density profiles has been used to calculate the plasma loading/complex antenna input impedance at the launcher feed for various ne and |B| values, for the purpose of estimating power handling. It also incorporates the geometry of all launcher structures relevant to this determination. A still more detailed model of the launcher together with a lossy dielectric plasma surrogate has been used to determine RF electric field values and power losses in the device components.Similar models have been produced to predict the performance and power handling of the ICH launcher. For this device the impedance matrix of the two-element antenna array is calculated using a warm plasma model, necessary to properly determine the wave propagation and absorption.

Goulding, Richard↗
NASA NTRS1985

A new mechanism for excitation of electrostatic ion cyclotron waves and associated perpendicular ion heating

A new mechanism for exciting the kinetic ion cyclotron waves in the presence of a nonuniform electric field perpendicular to the external magnetic field is given. Application of this instability to various space plasmas is discussed. The new instability mechanism may provide a more efficient agent for perpendicular ion heating than other EIC generation processes, since the linear growth rate is insensitive to the temperature ratio.

Ganguli, G.↗
NASA NTRS1974

Ion heating in a plasma focus

Ion acceleration and heating in a plasma focus were investigated by the numerical integration of the three-dimensional equations of motion. The electric and magnetic fields given were derived from experimental data. The results obtained show that during the collapse phase of focus formation, ions are efficiently heated to temperatures of several keV. During the phase of rapid current reduction, ions are accelerated to large velocities in the axial direction. The results obtained with the model are in general agreement with experimental results.

Hohl, F.↗
NASA NTRS1984

Ion-neutral coupling in the high-latitude F region Evaluation of ion heating terms from Dynamics Explorer 2

Ion and neutral motions in the high latitude F layer were studied simultaneously during six passes of the Dynamics Explorer 2 spacecraft. The passes were made over the south polar cap in October 1981. An ion energy balance equation was defined to express the exchange of energy between the F layer and other atmospheric constituents. A momentum equation expressed the momentum exchange between the species. An approximate form of the energy balance equation was also formulated. The time constant for ion-neutral collisional momentum transfer significantly affected Joule heating in the F layer. Regions of large velocity disparities and ion temperature enhancements were detected as hot spots. The results indicate that a feedback mechanism may arise in terms of neutral compositional changes and enhanced ionospheric recombination. The approximate equation furnished values for ion heating rates which matched the data.

Killeen, T. L.↗
NASA NTRS1990

Dispersive and viscous scale lengths in the two-stage ion heating at quasi-parallel collisionless shocks

A simulation of quasi-parallel (QP) collisionless shock waves is used to deduce the dispersive and viscous scale lengths of QP shocks. The findings were found to be consistent with the observational results obtained by Scudder et al. (1984) and Kennel et al. (1984). It is shown that the upstream wavelength is the dispersive scale length which governs the magnetic-field structure of the shock. It is also shown that the two-stage ion heating obtained by Mandt and Kan (1988) is an intrinsic characteristic of the ion heating process in QP shocks.

Mandt, M. E.↗