SEARCH · Search NASA
Results for “ionic liquid crystal”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A roadmap to uranium ionic liquids: Anti-crystal engineering
In the search for uranium-based ionic liquids, tris(N,N-dialkyldithiocarbamato)uranylates have been synthesized as salts of the 1-butyl-3-methylimidazolium (C 4 mim) cation. As dithiocarbamate ligands binding to the UO 2 2+ unit, tetra-, penta-, hexa-, and heptamethylenedithiocarbamates, N,N-diethyldithiocarbamate, N-methyl-N-propyldithiocarbamate, N-ethyl-N-propyldithiocarbamate, and N-methyl-N-butyldithiocarbamate have been explored. X-ray single-crystal diffraction allowed unambiguous structural characterization of all compounds except N-methyl-N-butyldithiocarbamate, which is obtained as a glassy material only. In addition, powder X-ray diffraction as well as vibrational and UV/Vis spectroscopy, supported by computational methods, were used to characterize the products. Differential scanning calorimetry was employed to investigate the phase-transition behavior depending on the N,N-dialkyldithiocarbamato ligand with the aim to establish structure–property relationships regarding the ionic liquid formation capability. Compounds with the least symmetric N,N-dialkyldithiocarbamato ligand and hence the least symmetric anions, tris(N-methyl-N-propyldithiocarbamato)uranylate, tris(N-ethyl-N-propyldithiocarbamato)uranylate, and tris(N-methyl-N-butyldithiocarbamato)uranylate, lead to the formation of (room-temperature) ionic liquids, which confirms that low-symmetry ions are indeed suitable to suppress crystallization. As a result, these materials combine low melting points, stable complex formation, and hydrophobicity and are therefore excellent candidates for nuclear fuel purification and recovery.
Surface Nanocrystallization of an Ionic Liquid
Surface crystallization at the vapor-liquid interface of the ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) is observed in synchrotron x-ray diffraction studies. Sharp Bragg reflections emerge in grazing-angle x-ray diffraction patterns 37 C above the bulk melting temperature, indicating the presence of a long-range ordered phase at the surface in coexistence with the bulk parent liquid. The unique structure of the vapor-liquid interface where butyl chains attached to the cations are expelled to the vapor side facilitates interionic electrostatic interactions that lead to the crystallization. Our results demonstrate the complexity of ionic-liquid structure with their tendency to spontaneously phase separate into nanodomains with finite correlation lengths in coexistence with the liquid phase. By virtue of interfacial boundary conditions, these nanodomains grow laterally to form quasi-two-dimensional crystals.
Clean surface processing of rubrene single crystal immersed in ionic liquid by using frequency modulation atomic force microscopy
Surface processing of a rubrene single crystal immersed in ionic liquids is valuable for further development of low voltage transistors operated by an electric double layer. We performed a precise and clean surface processing based on the tip-induced dissolution of rubrene molecules at the ionic liquid/rubrene single crystal interfaces by using frequency modulation atomic force microscopy. Molecular resolution imaging revealed that the tip-induced dissolution proceeded via metastable low density states derived from the anisotropic intermolecular interactions within the crystal structure.
Membrane-based Ionic Liquid Absorption System for Ultra-Efficient Dehumidification and Heating
The project team – comprising the University of Florida (UF), GTI Energy, and Modine Manufacturing – sought to develop a highly efficient heat-powered absorption cycle with combined dehumidification and heat pumping. This DOE-supported project advanced the technology from a TRL of 3 to 6, culminating in the development of a 1,000 CFM system. Key innovations implemented in the system addressed the low efficiency, size, cost, and reliability challenges of conventional absorption cycles. Specifically, the system was enabled by: (1) a semi-open cycle that allowed simultaneous dehumidification and heat recovery, (2) non-crystallizing ionic liquids (ILs) that enabled “double-effect” operation at elevated temperatures without the need for costly control equipment, (3) a compact membrane-based absorber that confined the IL and directly cooled it to achieve low dew points, and (4) a novel, highly integrated desorber–condenser assembly that reduced size, weight, and cost. The technology was developed with commercial HVAC applications in mind, particularly for separate sensible and latent cooling (SSLC), an innovation aimed at achieving independent and more efficient humidity control.
A Systematic Study on the Mesomorphic Behavior of Asymmetrical 1-Alkyl-3-dodecylimidazolium Bromides
To determine the essential parameters for mesophase formation in imidazolium-based ionic liquids (ILs), a library of 1-alkyl-3-dodecylimidazolium bromides was synthesized, abbreviated as CnC12, where 0 ≤ n ≤ 13, as the general notion is that a dodecyl side chain would guarantee the formation of an ionic liquid crystal (ILC). All salts were fully characterized by NMR spectroscopy and mass spectrometry. Their thermal properties were recorded, and mesophase formation was assessed. An odd–even effect is observed for 5 ≤ n ≤ 10 in the temperatures of melting transitions. While the majority of this series, as expected, formed mesophases, surprisingly compounds C2C12 and C6C12 could not be classified as ILCs, the latter being a room temperature IL, while C2C12 is a crystalline solid with melting point at 37 °C. The single crystal structure of compound 1-ethyl-3-dodecylimidazolium bromide (C2C12) was successfully obtained. Remarkably, the arrangement of imidazolium cores in the structure is very complicated due to multiple nonclassical hydrogen bonds between bromide anions and imidazolium head groups. In this arrangement, neighboring imidazolium rings are forced by hydrogen bonds to form a “face-to-face” conformation. This seems to be responsible for the elimination of a mesophase. To conclude, the general view of a dodecyl chain being a functional group to generate a mesophase is not entirely valid.
Self-Assembly of Lyotropic Chromonic Liquid Crystal Sunset Yellow and Effects of Ionic Additives
Lyotropic chromonic liquid crystals (LCLCs) are formed by molecules with ionic groups at the periphery that associate into stacks through noncovalent self-assembly while in water. The very existence of the nematic (N) phase in the typical LCLC, the dye Sunset Yellow (SSY) is a puzzle, as the correlation length associated with the stacking, as measured in the X-ray experiments, is too short to explain the orientational order by the Onsager model. We propose that the aggregates can be more complex than simple rods and contain 'stacking faults' such as junctions with a shift of neighboring molecules, 3-fold junctions, etc. We study how ionic additives, such as salts of different valency and pH-altering agents, alter the N phase of SSY purified by recrystallization. The additives induce two general trends: (a) stabilization of the N phase, caused by the mono and divalent salts (such as NaCl), and evidenced by the increase of the N-to-I transition temperature and the correlation length; (b) suppression of the N phase manifested in the decrease of the N-to-I transition temperature and in separation of the N phase into a more densely packed N phase or the columnar (C) phase, coexisting with a less condensed I phase. The scenario (b) can be triggered by simply increasing pH (adding NaOH). The effects produced by tetravalent spermine fall mostly into the category (b), but the detail depends on whether this additive is in its salt form or a free base form. The base form causes changes through changes in pH and possible excluded volume effects whereas the salt form might disrupt the structure of SSY aggregates.
Strongly Correlated Ion Dynamics in Plastic Ionic Crystals and Polymerized Ionic Liquids
Understanding the mechanisms controlling ionic conductivity is critical for the development of the next generation of batteries and supercapacitors. This paper discusses the significant role played by ionic correlations in conductivity of concentrated ionic systems. Our studies of an organic ionic plastic crystal reveal that correlations in ions dynamics suppress conductivity by 25–100 times in comparison to the expected uncorrelated ionic conductivity estimated from the Nernst–Einstein relationship. Furthermore, additional analysis also demonstrates that ionic correlations suppress conductivity in polymerized ionic liquids and gel by ~10 times. Thus, ionic correlations, usually neglected in many studies, play a very important role in conductivity of concentrated ionic systems. These results cannot be explained by a diffusion of ion pairs because all these systems are essentially single ion conductors. In contrast, strongly correlated motions of mobile ions with the same charge (cation–cation or anion–anion correlations) are the major mechanism suppressing the ionic conductivity in these systems. Finally, on the basis of these results, we emphasize that charge transport rather than ion diffusion is critical for electrolyte performance and suggest the potential design of plastic crystals and polymer electrolytes with enhanced ionic conductivity.
Self-Assembly Behavior of an Oligothiophene-Based Conjugated Liquid Crystal and Its Implication for Ionic Conductivity Characteristics
Here, a joint experimental and computational study on the synthesis, selfassembly and ionic conduction characteristics of a new conjugated liquid crystal quaterthiophene/poly(ethylene oxide) (PEO4) consisting of terminal tetraethyleneglycol monomethyl ether groups on both ends of a quaterthiophene core. In agreement with molecular dynamic simulations, temperature-dependent grazing-incidence wide angle X-ray scattering and X-ray diffraction indicate that the molecule spontaneously forms a smectic phase at ambient temperature as characterized both in bulk and thin film configurations. Significantly, this smectic phase is maintained upon blending with bis(trifluoro-methanesulfonyl)imide (LiTFSI) as ion source at a concentration ratio up to r = [Li + ]/[EO] = 0.05. Nanosegregation between oligothiophene and PEO moieties and π-π stacking of thiophene rings led to the formation of efficient 2D pathways for ion transport, resulting in thin film in-plane ionic conductivity as high as 5.2 x 10 -4 S/cm -1 at 70°C and r = 0.05 as measured by electrochemical impedance spectroscopy (EIS). Upon heating the samples above a transition temperature around 95 °C, a less ordered phase forms associated with a pronounced drop in ionic conductivity. Finally, upon cooling, partial and local reordering of the conducting smectic domains leads to an ionic conductivity decrease compared to the as-cast state.
Study of self-assembly behavior and ionic conductivity of conjugated liquid crystals with T-shaped facial-polyphilic structure
The unique self-assembly of liquid crystals (LCs), combined with their potential application as organic semiconductors, has become a focus of recent research. Here, a joint experimental and computational study of the self-assembly and ionic conduction was carried out on a series of T-shaped conjugated LCs consisting of three incompatible components. By extending the EOn side-chain length, several experimental evaluations confirmed a decrease of the order-disorder transition temperature, while coarse-grained simulations revealed a structural evolution from a smectic phase to a columnar phase. Ionic conductivity of these molecules was achieved by adding Li salt, leading to a maximum conductivity of 1.1 × 10 −3 siemens per centimeter observed at 120°C. All-atom simulations were performed to examine the Li-ion solvation environment and to evaluate the intrachain and interchain Li-ion hopping mechanisms. The molecule with a long EOn side chain was found to generate a densely distributed network of Li-ion solvation sites, which can facilitate effective interchain hopping to promote ion transport.
Crystallization of nanopore-confined imidazolium ionic liquids probed by temperature-resolved in situ grazing-incidence wide angle X-ray scattering (GIWAXS)
The crystallization behavior of ionic liquids (ILs) 1-butyl-3-methylimidazolium [BMIM] hexafluorophosphate [PF 6 ] and chloride [Cl] is investigated upon confinement in 2.3 or 8.2 nm diameter silica nanopore arrays, along with the effects of covalently modifying the pore walls with 1-(3-trimethoxysilylpropyl)3-methylimidazolium [TMS-MIM] + groups. In situ grazing-incidence wide angle x-ray scattering (GIWAXS) is performed during heating from as low as -110 °C to room temperature. Partially ordered “nanodomains” are observed in both ILs in the bulk molten state, but they are disrupted by nanoconfinement. Melting point depression consistent with capillary effects is observed for [BMIM][PF 6 ] in 2.3 nm pores. However, the melting point is elevated for [BMIM][PF 6 ] in 8.2 nm pores, which provide sufficient space to stabilize the crystalline phase. For [BMIM][Cl], crystallization is observed only in 8.2 nm bare silica pores, but the melting point is severely depressed. Tethering with IL-like [TMS-MIM + ] also promotes the crystallization of [BMIM][PF 6 ], resulting in elevated melting points. The combined effects of a larger pore size and pore surface tethering on [BMIM][PF 6 ] result in a single stable crystal phase that persists from -140 °C to 25 °C (vs. the bulk melting point of -11 °C). These results show that when ILs are used in confined systems, complex crystallization behavior can emerge depending on the counterion, pore size, and surface modification that require consideration of ion layering in the confined space in addition to surface free energy effects.
Phase behavior and dynamics of a cholesteric liquid crystal
The synthesis, equation of state, phase diagram, and dielectric relaxation properties are reported for a new liquid crystal, 4{sup ′}-butyl-4-(2-methylbutoxy)azoxybenzene (4ABO5*), which exhibits a cholesteric phase at ambient temperature. The steepness of the intermolecular potential was characterized from the thermodynamic potential parameter, Γ = 4.3 ± 0.1 and the dynamic scaling exponent, γ = 3.5 ± 0.2. The difference between them is similar to that seen previously for nematic and smectic liquid crystals, with the near equivalence of Γ and γ consistent with the near constancy of the relaxation time of 4ABO5* at the cholesteric to isotropic phase transition (i.e., the clearing line). Thus, chirality does not cause deviations from the general relationship between thermodynamics and dynamics in the ordered phase of liquid crystals. The ionic conductivity of 4ABO5* shows strong coupling to the reorientational dynamics.
Formation of Gd coordination polymer with 1D chains mediated by Bronsted acidic ionic liquids
One dimensional coordination polymer Gd[(SO{sub 4})(NO{sub 3})(C{sub 2}H{sub 6}SO){sub 2}] (1) is prepared through the mediation of Bronsted acid ionic liquid, which crystallized in the monoclinic space of C2/c. In this polymer, adjacent Gd atoms are linked by two SO{sub 4}{sup 2-} ions to generate a 1-D chain, and all oxygen atoms in SO{sub 4}{sup 2-} groups are connected to three nearest Gd atoms in µ{sup 3}:η{sup 1}:η{sup 1}:η{sup 2} fashion. Gd, S and N from SO{sub 4}{sup 2-} and NO{sub 3}{sup -} are precisely coplanar. The planar is coordinated by a pair of DMSO molecules, which is parallel and linked by hydrogen bonding to form a three-dimensional supramolecular network. Magnetic susceptibility measurement of 1 reveals weak antiferromagnetic interactions between the Gd (III) ions. It exhibits relatively large magneto-caloric effect with –ΔS{sub m}=28.8 J Kg{sup −1} K{sup −1} for ΔH=7 T. - Graphical abstract: Coordination polymer Gd[(SO{sub 4})(NO{sub 3})(C{sub 2}H{sub 6}SO){sub 2}] was obtained mediated by Bronsted acid Ionic Liquid, which presents a 1-D chains collected by SO{sub 4}{sup 2-} groups. Magnetic susceptibility of the polymer reveals weak antiferromagnetic interactions between the Gd(III) ions with the relatively large magneto-caloric effect of –ΔS{sub m}=28.8 J Kg{sup −1} K{sup −1} for ΔH= 7T.
A New Version of the Lithium Ion Conducting Plastic Crystal Solid Electrolyte
Abstract Portable electronic devices are predominantly powered by lithium ion batteries in which the electrolyte is a liquid or gel of lithium salts dissolved in molecular solvents. There have been many attempts to replace the flammable liquid component of the electrolyte by alternative alkali metal transporting media, such as superionic crystals, alkali‐conducting glassy solids, ionic liquids, salt‐in‐molecular plastic crystal solvent, and salt‐in‐ionic plastic crystal solvents. Except for the first two of the above, which have their own problems, all the above have the disadvantage that the alkali cation is the least mobile of the ionic species due to its high charge/radius ratio. Here, some new, silylsulfate‐based are introduced. Members of the class of lithium ion conductor in which the alkali ion is the only cationic species present, and the salt itself is a plastic crystal, a solid in which the anion centers of mass are ordered, but the anion orientations are disordered and dynamic (best example NaCB 9 H 10 , see text). It is shown that depending on the nature of the anion, the conductivity may be within a factor of two of the standard liquid carbonate electrolyte. The soft, spreadable electrolyte, impregnated in Celgard separators, supports truly reversible Li insertion into the LiCoO 2 cathode.
Ionothermal synthesis of open-framework metal phosphates with a Kagome lattice network exhibiting canted anti-ferromagnetism
Four open-framework transition-metal phosphates; (NH4)2Co3(HPO4)2F4 (1), (NH4)Co3(HPO4)2(H2PO4)F2 (2), KCo3(HPO4)2(H2PO4)F2 (3), and KFe3(HPO4)2(H2PO4)F2 (4); are prepared by ionothermal synthesis using pyridinium hexafluorophosphate as the ionic liquid. Single-crystal X-ray diffraction analyses reveal that the four compounds contain cobalt/iron–oxygen/fluoride layers with Kagomé topology composed of interlinked face-sharing MO3F3/MO4F2 octahedra. PO3OH pseudo-tetrahedral groups augment the [M3O6F4] (1)/[M3O8F2] layers on both sides to give M3(HPO4)2F4 (1) and M3(HPO4)2F2 (2–4) layers. These layers are stacked along the a axis in a sequence AA…, resulting in the formation of a layer structure for (NH4)2Co3(HPO4)2F4(1). In NH4Co3(HPO4)2(H2PO4)F2 and KM3(HPO4)2(H2PO4)F2, the M3(HPO4)2F2 layers are stacked along the a axis in a sequence AAi… and are connected by [PO3(OH)] tetrahedra, giving rise to a 3-D open framework structure with 10-ring channels along the [001] direction. The negative charges of the inorganic framework are balanced by K+/NH4+ ions located within the channels. The magnetic transition metal cations themselves form layers with stair-case Kagomé topology. Magnetic susceptibility and magnetization measurements reveal that all four compounds exhibit a canted anti-ferromagnetic ground state (Tc = 10 or 13 K for Co and Tc = 27 K for Fe) with different canting angles. The full orbital moment is observed for both Co2+ and Fe2+.
Crystal structure of dimethylformamidium bis(trifluoromethanesulfonyl)amide: an ionic liquid
At 100 K, the title molecular salt, C 3 H 8 NO + ·C 2 F 6 NO 4 S 2 - , has orthorhombic ( P 2 1 2 1 2 1 ) symmetry; the amino H atom of bis(trifluoromethanesulfonyl)amine (HNTf 2 ) was transferred to the basic O atom of dimethylformamide (DMF) when the ionic liquid components were mixed. The structure displays an O—H...N hydrogen bond, which links the cation to the anion, which is reinforced by a non-conventional C—H...O interaction, generating an R 2 2 (7) loop. A further very weak C—H...O interaction generates an [001] chain.
Solvation of Ucl (6)**2- Anionic Complex By Mebu (3) N+, Bume (2) Im+, And Bumeim+ Cations
The complexes [MeBu{sub 3}N]{sub 2}[UCl{sub 6}] and [BuMe{sub 2}Im]{sub 2}[UCl{sub 6}] were characterized in the solid state and in solution of [MeBu{sub 3}N][Tf{sub 2}N], [BuMe{sub 2}Im][Tf{sub 2}N], and [BuMeIm][Tf{sub 2}N] room-temperature ionic liquids using single-crystal XRD, EXAFS, electrochemistry, UV-visible absorption spectroscopy, and NMR. In the solid state and in solution, the existence of hydrogen bonding between the UCl{sub 6}{sup 2-} complex and the ionic liquid cations was revealed by these techniques. The MeBu{sub 3}N{sup +} cation interacts with UCl{sub 6}{sup 2-} via the protons on the {alpha}-carbon atoms of nitrogen. The protons of the imidazolium ring account for the interaction between the BuMe{sub 2}Im{sup +} cation and the UCl{sub 6}{sup 2-} anion. For the BuMeIm{sup +} cation the major interaction was confirmed between the most acidic proton on C(2) and the chlorides of UCl{sub 6}{sup 2-}. The experimental results also show that the intensity of the interaction between the UCl{sub 6}{sup 2-} anion and the cation varies with the ionic liquid cation in the following order: MeBu{sub 3}N{sup +} {approx} BuMe{sub 2}Im{sup +} << BuMeIm{sup +}.
Campaign 2 Level 2 Milestone Review 2009: Milestone # 3132 Determine Sustainable TATB Source and Processing Options, and Potential Binder Options
A presentation was made to the Milestone review committee on September 18, 2009 that outlined the efforts making up the achievement of the Campaign 2, Level 2 Milestone No.3132. After the presentation and review of the collective work, the committee determined that the milestone was successfully completed. Highlights from this review are discussed here. A brief summary of the discussion points includes: (1) It was clear that this work represents a comprehensive collection of experimental, modeling, literature review, and analysis activities with a thorough attention to the details. The deliverables include 2 technical presentations and 5 written reports describing this work. (2) This is a joint LLNL/LANL milestone led by Campaign 2 with leveraging effort from other campaigns and activities at LLNL: (a) The contributing programs included Enhanced Surveillance Campaign (ESC) and Readiness Campaign. Key technical elements of this work were built on scientific advances from the Laboratory Directed Research and Development (LDRD) program. (b) Part of this work covers activities associated with the Enhanced Collaboration (EC) with the Atomic Weapons Establishment (AWE). (3) This Milestone work has supported a high-level Directed Stockpile Work (DSW) Joint DoD/DOE TATB Production Initiative. This is an example of the strong relevance of this Milestone research to current stockpile issues. A summary of the future direction in this research area includes: (1) The Ionic Liquid (IL) re-crystallization process has been demonstrated to improve the performance of recrystallized TATB molecule. However, lower thermal stability of the IL crystallized material (compared to conventional TATB) warrants further study to understand the source of this effect. (2) The compatibility issue needs to be addressed in upcoming work. One concern is how the new solvent and ionic liquid used in the formulation process might behave in the nuclear explosive assembly. Similarly, compatibility studies for the candidate binder must be performed. The future focus on R&D and additional scientific tools to address these areas is technically sound. (3) Currently there is no defined process for advancing this milestone's research and development successes into a production scale effort. The committee recognizes that other campaigns (Readiness Campaign, Enhanced Surveillance Campaign) will need to consider additional leverage resources for that scale-up effort. (4) We recommend that this effort continues to use modeling and experiment as complimentary paths to strengthen the scientific approach.