Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotherm modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

X-Ray Emission from a Simulated Cluster of Galaxies

Using the 1993 cluster simulation of Katz & White, we analyze the intracluster medium and investigate the accuracy of the standard hydrostatic method for determining cluster masses. We show that the simulated cluster gas is in hydrostatic equilibrium with a subsonic flow toward the center. Inside a radius of (approx.) 100 kpc, this flow is in a steady state. The cooling time is shorter than a Hubble time within the central 50 kpc. The flow rate is regulated by the gas sink in the middle of the cluster and the PdV work done as the gas flows in, verifying the standard cooling flow scenario. We simulate observations of the cluster using the instrument parameters of the EXOSAT ME detector and the Einstein IPC detector. Even though the intracluster gas is not isothermal, isothermal models of the cluster, excluding regions within 100 kpc of galaxies, fit the EXOSAT X-ray spectra as well as they fit real clusters. The X- ray surface brightness distribution is similar to that of real clusters, again excluding the galaxies. We simulate the procedure used to determine the masses of real clusters. We use the equation of hydrostatic equilibrium together with the temperature derived from an isothermal fit to the simulated EXOSAT spectrum and the density profile derived from a fit to the simulated IPC surface brightness profile to determine the mass. A comparison of the derived mass profile to the actual mass profile shows that errors of a factor of 2 are possible. If the actual temperature profile is used, the cluster mass is found to an accuracy of better than 25% within the virial radius.

Tsai, John C.↗

Thermally conductive magnetohydrodynamic flows in helmet-streamer coronal structures

The behavior of thermally conductive plasma flows in helmet-streamer coronal structures is investigated within the framework of the axisymmetric nonrotating one-fluid MHD model. Continuous subsonic-supersonic solutions satisfying observed boundary conditions at the sun as well as the vanishing of the temperature at infinity are obtained and presented. Special attention is paid to the combined effects of conductive flow (and corresponding thermal force) and rapidly diverging magnetic field on the critical points. In this, the heliocentric distance of the neutral point determining the separation between closed and open field lines (cusp) is treated as a free parameter. These thermally conductive solutions are contrasted with those provided by corresponding isothermal models.

Cuperman, S.↗

A Numerical Method for Calculating Stellar Occultation Light Curves from an Arbitrary Atmospheric Model

We present a method for speeding up numerical calculations of a light curve for a stellar occultation by a planetary atmosphere with an arbitrary atmospheric model that has spherical symmetry. This improved speed makes least-squares fitting for model parameters practical. Our method takes as input several sets of values for the first two radial derivatives of the refractivity at different values of model parameters, and interpolates to obtain the light curve at intermediate values of one or more model parameters. It was developed for small occulting bodies such as Pluto and Triton, but is applicable to planets of all sizes. We also present the results of a series of tests showing that our method calculates light curves that are correct to an accuracy of 10(exp -4) of the unocculted stellar flux. The test benchmarks are (i) an atmosphere with a l/r dependence of temperature, which yields an analytic solution for the light curve, (ii) an atmosphere that produces an exponential refraction angle, and (iii) a small-planet isothermal model. With our method, least-squares fits to noiseless data also converge to values of parameters with fractional errors of no more than 10(exp -4), with the largest errors occurring in small planets. These errors are well below the precision of the best stellar occultation data available. Fits to noisy data had formal errors consistent with the level of synthetic noise added to the light curve. We conclude: (i) one should interpolate refractivity derivatives and then form light curves from the interpolated values, rather than interpolating the light curves themselves; (ii) for the most accuracy, one must specify the atmospheric model for radii many scale heights above half light; and (iii) for atmospheres with smoothly varying refractivity with altitude, light curves can be sampled as coarsely as two points per scale height.

Chamberlain, D. M.↗

Investigating the Differential Emission Measure and Energetics of Microflares with Combined SDO/AIA and RHESSI Observations

An important question in solar physics is whether solar microflares, the smallest currently observable flare events in X-rays, possess the same energetic properties as large flares. Recent surveys have suggested that microflares may be less efficient particle accelerators than large flares, and hence contribute less non-thermal energy, which may have implications for coronal heating mechanisms. We therefore explore the energetic properties of microflares by combining EUV and X-ray measurements. We present forward-fitting differential emission measure (DEM) analysis of 10 microflares. The fitting is constrained by combining, for the first time, high-temperature Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) observations and flux data from the Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA). Two fitting models are tested for the DEM; a Gaussian distribution and a uniform DEM profile. A Gaussian fit proved unable to explain the observations for any of the studied microflares. However, 8 of 10 events studied were reasonably fit by a uniform DEM profile. Hence microflare plasma can be considered to be significantly multi-thermal, and may not be significantly peaked or contain resolvable fine structure, within the uncertainties of the observational instruments. The thermal and non-thermal energy is estimated for each microflare, comparing the energy budget with an isothermal plasma assumption. From the multi-thermal fits the minimum non-thermal energy content was found to average approximately 30% of the estimated thermal energy. By comparison, under an isothermal model the non-thermal and thermal energy estimates were generally comparable. Hence, multi-thermal plasma is an important consideration for solar microflares that substantially alters their thermal and non-thermal energy content.

Sun: flares↗

Computer Modeling of Non-Isothermal Crystallization

A realistic computer model for simulating isothermal and non-isothermal phase transformations proceeding by homogeneous and heterogeneous nucleation and interface-limited growth is presented. A new treatment for particle size effects on the crystallization kinetics is developed and is incorporated into the numerical model. Time-dependent nucleation rates, size-dependent growth rates, and surface crystallization are also included. Model predictions are compared with experimental measurements of DSC/DTA peak parameters for the crystallization of lithium disilicate glass as a function of particle size, Pt doping levels, and water content. The quantitative agreement that is demonstrated indicates that the numerical model can be used to extract key kinetic data from easily obtained calorimetric data. The model can also be used to probe nucleation and growth behavior in regimes that are otherwise inaccessible. Based on a fit to data, an earlier prediction that the time-dependent nucleation rate in a DSC/DTA scan can rise above the steady-state value at a temperature higher than the peak in the steady-state rate is demonstrated.

Kelton, K. F.↗

X-ray observations of the supernova remnants Cas A and Tycho

A rocket-borne multilayer multianode proportional counter observation of Cas A and Tycho supernovae remnants shows no evidence for periodic emissions in the period range from 1 millisecond to 13 seconds. Comparison of inferred incident photon spectra and electromagnetic flux intensity as a function of energy rules out simple synchrotron or isothermal models for both Cas A and Tycho. It is concluded that there must still be a contemporary source of energy in the source region to connect the radio and X-ray emission from these remnants.

Brisken, A. F.↗

Nonhomologous contraction and equilibria of self-gravitating, magnetic interstellar clouds embedded in an intercloud medium: Star formation. II - Results

The paper studies the equilibrium of self-gravitating isothermal models of interstellar clouds with a frozen-in magnetic field linked smoothly to the field of a hot tenuous intercloud medium. Equilibrium states are determined which can be reached by clouds contracting nonhomologously from a spherical uniform initial state. Three free parameters characterize the problem: a dimensionless initial radius related to the Jeans length of the cloud, the initial ratio of the magnetic and gas pressures in the cloud, and the initial ratio of the intercloud and cloud pressures. The dependence of the solutions on each of these parameters is investigated. It is found that: (1) the frozen-in field causes the cloud to become oblate with its major axis normal to the field lines; (2) the flattening increases as the magnetic-field strength, gravitational forces, or intercloud pressure increases; (3) increasing intercloud pressure eventually leads to gravitational collapse; and (4) the cloud can reach equilibrium only if its radius does not exceed some critical value. The observed inefficiency of the star-formation process within massive clouds is examined and explained in terms of magnetic phenomena in a collapsing cloud.

Mouschovias, T. C.↗

Coronal temperatures and temperature gradients from OSO-7 spectroheliograms

Temperatures and temperature gradients for the outer corona are obtained from brightness gradients of EUV lines that were measured with the spectroheliograph on OSO-7. Brightness gradients show considerable deviations from isothermal model calculations that include collisional excitation and photoexcitation. A negative temperature gradient that gives both positive and negative ion-abundance gradients appears to be able to account for the discrepancy. For the 284-A of Fe XV, perhaps the strongest line from the outer corona, measurements during 1972 appear to be consistent with a temperature near 2.3 million K near the equator at about 1.3 solar radii from the solar center and with temperature-gradient values near -0.7 that extend from as low as 1.2 to about 1.8 solar radii. Temperatures from strong lines of Fe XIV and Fe XVI indicate that variations of about 200,000 K exist along lines of sight where emission is appreciable. There appears to be some agreement between these results and temperature measurements from ion abundances in the solar wind and the Doppler width of the 5303-A line.

Nakada, M. P.↗

Measurements of H-beta, He D3, and Ca/+/ 8542-A line emission in quiescent prominences

Measurements of H-beta, He D3, and Ca(+) 8542-A line emission in 18 quiescent prominences are presented which were performed with a 25-cm coronagraph/coude spectrograph system and an optical multichannel analyzer utilizing a Si-vidicon detector assembly mounted at the single-pass spectrograph port. The data obtained show that the line profiles deviate in the wings from those calculated on the basis of an isothermal atmosphere and a Gaussian absorption coefficient. Both a non-Gaussian microturbulence component and a temperature gradient from prominence-core to coronal values can successfully account for this phenomenon. The line widths from a given line of sight of prominence material are reduced on the basis of a common core emitting region with a temperature of 7500 to 11,600 K and a microturbulent velocity of 4.5 to 7.1 km/s for the isothermal model (these values are 5% to 10% less for the two-temperature model). It is noted that long-period low-amplitude oscillations in the D3 line width and intensity were observed when a specific line of sight in a quiescent prominence was followed. These oscillations are found to remain coherent for as many as 3 or 4 cycles and to be associated with prominence structural activation.

Landman, D. A.↗

HEAO-A2 observations of the X-ray spectra of the Centaurus and A1060 clusters of galaxies

The X-ray spectral observations of two low luminosity clusters of galaxies, Centaurus and A1060, are presented. An emission feature of the Centaurus cluster at 7.9 keV is detected at about one third of the strength of the 6.7 keV line. This higher energy line represents K sub beta emission from highly ionized iron. An isothermal model with an Fe emission line is discussed and it is shown that the model cannot fit the data of the Centaurus or the A1060 clusters. The implications of the two component nature of the continuum on the Fe abundance and the X-ray surface brightness distribution are discussed.

Mitchell, R.↗

X-ray analysis of a polar plume

Polar plumes have been detected in X-rays with the Skylab S-054 experiment. Observations of one well-observed plume are analyzed and the plasma pressure is determined. An isothermal model in hydrostatic equilibrium is found to require unacceptably low temperatures. A hydrodynamic model is proposed which is consistent with earlier white light and EUV observations. Calculations indicate that the total outward mass flux in polar plumes is comparable to that in high speed solar wind streams expected from a polar coronal hole.

Ahmad, I. A.↗

HEAO A-2 observations of the X-ray spectra of the Centaurus and A1060 clusters of galaxies

X-ray spectral observations of two nearby low-luminosity clusters of galaxies are presented. For the Centaurus cluster an emission feature at 7.9 keV is detected at about one-third of the strength of the 6.7 keV line. This higher energy line represents K-beta emission from highly ionized iron. In addition, it is demonstrated that for neither the Centaurus nor the A1060 cluster can an isothermal model with an Fe emission line adequately fit the data. Instead, the simplest models which provide acceptable fits include a second, harder component which may be either a second exponential or a power law. The implications of the two-component nature of the continuum on the Fe abundance and the X-ray surface-brightness distribution are discussed.

Mitchell, R.↗

Shock waves, atmospheric structure and mass loss in Miras

Large amplitude shock waves are observed to be present in the atmospheres of the Mira variables: spectral line doubling with Delta v 30 km/s is present in infrared spectra. Even the visible spectra contain some evidence for such shocks. These shocks are sufficiently large to clearly dominate the energy balance of the atmosphere. Mira variables also show symptoms of substantial mass loss rates: they are strong maser and infrared continuum sources and have strong circumstellar absorption features. The pulsation induced shocks which are seen to be present are obvious suspects for causing or enhancing the mass loss from these stars. The Miras thus present an ideal case for the study of dynamical effects on atmospheric structure, since both the dynamics and the results are clearly observable. The results are given of calculations of the thermalization and cooling of the shock heated material passing through shock fronts whose properties were selected to be consistent with both the isothermal models and the spectroscopic observations.

Willson, L. A.↗

Ginga observations of the Coma cluster and studies of the spatial distribution of iron

The large area counters on the Japanese satellite Ginga have been used to determine the X-ray spectrum from the central region of the Coma cluster of galaxies over the energy range from 1.5 to 20 keV. The spectrum is well represented by an isothermal model of temperature 8.21 +/- 0.16 keV and a heavy element (iron) abundance of 0.212 +/- 0.027, relative to the cosmic value. The Ginga spectrum was found to be consistent with the X-ray spectra from the Tenma and EXOSAT satellites for a large class of nonisothermal temperature distributions. The measured iron elemental abundances were used to set a lower limit on the total mass of iron in Coma under the assumption that the iron is not distributed uniformly throughout the cluster. The mass ratio of iron relative to hydrogen (within 2 Mpc) is not less than 18 percent of the cosmic iron to hydrogen mass ratio. This compares to an average abundance of 24 percent if the iron is distributed uniformly. We discuss these results in terms of models for the production of iron in galaxy clusters.

Hughes, John P.↗

ASCA solid state imaging spectrometer observations of O stars

We report ASCA Solid State Imaging Spectrometer (SIS) x-ray observations of the O stars delta Ori and lambda Ori. The energy resolution of the SIS allows us to resolve features in the O star x-ray spectra which are not apparent in spectra obtained by x-ray spectrometers with lower energy resolution. SIS spectra from both stars show evidence of line emission, suggesting the thermal nature of the x-ray source. However, the observed line strengths are different for the two stars. The observed stellar x-ray spectra are not well described by isothermal models although absorbed thermal emission models with two or more temperatures can provide an adequate fit to the data. For both stars we present evidence of absorbing columns significantly larger than the known ISM columns, indicative of absorption by a circumstellar medium, presumably the stellar winds. In addition, the lambda Ori spectrum shows the presence of emission at energies greater than 3 keV which is not seen in the delta Ori spectrum.

Corcoran, M. F.↗

ASCA solid state imaging spectrometer observations of O stars

We report ASCA Solid State Imaging Spectrometer (SIS) X-ray observations of the O stars delta Ori and lambda Ori. The energy resolution of the SIS allows us to resolve features in the O star X-ray spectra which are not apparent in spectra obtained by X-ray spectrometers with lower energy resolution. SIS spectra from both stars show evidence of line emission, suggesting the thermal nature of the X-ray source. However, the observed line strengths are different for the two stars. The observed stellar X-ray spectra are not well described by isothermal models although absorbed thermal emission models with two or more temperatures can provide an adequate fit to the data. For both stars we present evidence of absorbing columns significantly larger than the known Interstellar Medium (ISM) columns, indicative of absorption by a circumstellar medium, presumably the stellar winds. In addition, the lambda Ori spectrum shows the presence of emission at energies greater than 3 keV which is not seen in the delta Ori spectrum.

Corcoran, M. F.↗

X-Ray Spectroscopy of the Cluster of Galaxies Abell 1795 with XMM-Newton

The initial results from XMM-Newton observations of the rich cluster of galaxies Abell 1795 are presented. The spatially-resolved X-ray spectra taken by the European Photon Imaging Cameras (EPIC) show a temperature drop at a radius of - 200 kpc from the cluster center, indicating that the ICM is cooling. Both the EPIC and the Reflection Grating Spectrometers (RGS) spectra extracted from the cluster center can be described by an isothermal model with a temperature of approx. 4 keV. The volume emission measure of any cool component (less than 1 keV) is less than a few % of the hot component at the cluster center. A strong O VIII Lyman alpha line was detected with the RGS from the cluster core. The O abundance of the ICM is 0.2-0.5 times the solar value. The O to Fe ratio at the cluster center is 0.5 - 1.5 times the solar ratio.

Tamura, T.↗

CO2 Capacity Sorbent Analysis using Volumetric Measurement Approach

In support of air revitalization system sorbent selection for future space missions, Ames Research Center (ARC) has performed CO2 capacity tests on various sorbents to complement structural strength tests from Marshall Space Flight Center (MSFC). The materials of interest are: Grace Davison Grade 544 13x, Honeywell UOP APG III, VSA-10, BASF 13x, and Grace Davison Grade 522 5A. Each sorbents CO2 capacity was measured using a Micromeritics ASAP 2020 Physisorption Volumetric Analysis machine to produce 0C, 10C, 25C, 50C, and 75C isotherms. These datasets were then extrapolated using Langmuir 3-Site and Toth isotherm models to compare with previously measured capacity data from MSFC using a thermogravimetric analysis approach. The modeling and extrapolation from ARC data correlated well with data measured at MSFC.

Air Revitalization↗