Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser mode locking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Saturable absorber based on silver nanoparticles for passively mode-locked lasers

A saturable absorber based on plane (tabular) stabilised silver nanocrystals, which is promising for picoseconds laser systems operating in the range 650–900 nm, is studied. This material has a plasmon decay time of about 2 ps, while its absorption at a pump intensity of 10 MW cm{sup -2} decreases by 1.6%, which is sufficient for using this crystal for passive mode locking. (control of laser radiation parameters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mode-Locked Lasers with “Thin” Quantum Wells in 1.55 μm Spectral Range

We present the results of an experimental study of two-section semiconductor lasers with active region consisting of three 3.1 nm InGaAs/InGaAlAs quantum wells. Passive mode-locking regime with a repetition rate of 10 GHz is realized. Different approaches have been compared to determine the stability of pulse repetition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-average-power, 2-μm femtosecond optical parametric oscillator synchronously pumped by a thin-disk, mode-locked laser

A high-energy, extended-cavity femtosecond BiBO optical parametric oscillator synchronously pumped by a 1.0-ps, 1030-nm Yb:YAG, thin-disk pump laser is presented. The oscillator operated near degeneracy in a noncollinear interaction geometry, producing signal wavelength tunability from 1.99 to 2.20 μm. The signal pulses have an average power exceeding 2 W, producing 455-fs pulses at 7.08 MHz with energies up to 350 nJ, showing increased potential for tunable sources of scalable ultrafast pulses in the infrared.

36 MATERIALS SCIENCE↗

Q-switched, cavity-dumped, mode-locked laser

Continuous-wave laser can achieve higher rate of emission through Q-switching. Technique keeps Q, energy storage rating, of laser cavity at low value while ion population inversion is being built up. Then Q is suddenly switched to high value just before instability occurs.

Fountain, W.↗

Actively mode-locked diode laser with a mode spacing stability of ∼6 × 10{sup -14}

We have studied mode spacing stability in an actively mode-locked external-cavity semiconductor laser. It has been shown that, in the case of mode spacing pulling to the frequency of a highly stable external microwave signal produced by a hydrogen standard (stability of 4 × 10{sup -14} over an averaging period τ = 10 s), this configuration ensures a mode spacing stability of 5.92 × 10{sup -14} (τ = 10 s). (control of radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling multipulsing transition in ring cavity lasers with proper orthogonal decomposition

A low-dimensional model is constructed via the proper orthogonal decomposition (POD) to characterize the multipulsing phenomenon in a ring cavity laser mode locked by a saturable absorber. The onset of the multipulsing transition is characterized by an oscillatory state (created by a Hopf bifurcation) that is then itself destabilized to a double-pulse configuration (by a fold bifurcation). A four-mode POD analysis, which uses the principal components, or singular value decomposition modes, of the mode-locked laser, provides a simple analytic framework for a complete characterization of the entire transition process and its associated bifurcations. These findings are in good agreement with the full governing equation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dually-mode-locked ND: YAG laser

Mode-locking is stabilized effectively by conventional loss-modulator and phase-modulator, mode-locking elements placed in laser cavity in optical series with one another. Resulting dually-mode-locked system provides pulses with constant phase relative to mode-lock drive signal without presence of relaxation oscillation noise.

Osmundson, J.↗

Effect of the doped fibre length on soliton pulses of a bidirectional mode-locked fibre laser

A passively bidirectional mode-locked fibre laser is demonstrated using a highly concentrated erbium-doped fibre (EDF) as a gain medium. To accomplish mode-locked operation in a short cavity, use is made of carbon nanotubes (CNTs) as a saturable absorber. Soliton pulses are obtained at a wavelength of 1560 nm with a repetition rate ranging from 43.92 MHz to 46.97 MHz and pulse width stretching from 0.56 ps to 0.41 ps as the EDF length is reduced from 60 cm to 30 cm. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism of high-energy pulse generation without wave breaking in mode-locked fiber lasers

The mechanism and intrinsic conditions of high-energy wave-breaking-free pulse generation in fiber lasers mode-locked by a nonlinear polarization rotation technique are investigated numerically and experimentally. Both numerical and experimental results show that the pulses along the two orthogonal polarization axes of the fiber have a large difference in pulse energy. The numerical simulations show that the ratio of the energy of two components is limited and ranges from about 8 to about 65. The slope of the instantaneous frequency at the central position of the pulse decreases rapidly with the increase of the pulse duration and energy, whereas the slope at the pulse edge changes slightly. The accumulation of instantaneous frequency throughout the pulse width approaches a constant in a higher pulse energy regime. Understanding the mechanism and intrinsic conditions of the wave-breaking-free pulse generation could be useful in generating high-energy pulses delivered from fiber lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchronously pumped mode-locked Ti:Al2O3 lasers

Synchronously pumped mode-locked laser operation in a Ti:Al2O3 ring laser is demonstrated. The laser pump source was a frequency-doubled Nd:YAG laser-amplifier system producing a 60-micron-long macropulse that comprised a wavetrain of mode-locked 70-ps micropulses with a 10-ns spacing (100 MHz). The Ti:Al2O3 laser consisted of a 1-cm-long crystal with faces cut at the Brewster angle and placed in a ring laser cavity configuration with a 2 percent output coupling mirror. The cavity was adjusted for a 5-ns round trip transit time, which was close to half the temporal spacing of the pump pulse. When the crystal was pumped synchronously at 532 nm with a 30-mJ macropulse, which was approximately an order of magnitude above the laser threshold, mode-locked lasing at approximately 200 MHz was obtained. This macropulse pump energy corresponds to an average micropulse pump energy of about 5 microJ at the Ti:Al2O3 crystal face. The mode-locked operation of the Ti:Al2O3 was observed only after several microseconds into the macropulse, indicating a long build-up process over many cavity trips. During this time, relaxation oscillations were observed. When mode locking started, the relaxation oscillation frequency increased by an order of magnitude. Synchronous pumping has been limited to operation with dye lasers and used either a CW or pulsed mode-locked pump source. Recent work has demonstrated CW mode-locked operation of a Ti:Al2O3 laser. The result raises the possibility that pulsed synchronous pumping may be used to obtain significantly narrowed laser pulses in Ti:Al2O3.

Source record↗

Hysteresis phenomena and multipulse formation of a dissipative system in a passively mode-locked fiber laser

A model describing the dissipative soliton evolution in a passively mode-locked fiber laser is proposed by using the nonlinear polarization rotation technique and the spectral filtering effect. It is numerically found that the laser alternately evolves on the stable and unstable mode-locking states as a function of the pump strength. Numerical simulations show that the passively mode-locked fiber lasers with large net normal dispersion can operate on multiple pulse behavior and hysteresis phenomena. The experimental observations confirm the theoretical predictions. The theoretical and experimental results achieved are qualitatively distinct from those observed in net-anomalous-dispersion conventional-soliton fiber lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗