Search NASA⌕ Search

SEARCH · Search NASA

Results for “layered magnetism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

dc modulation noise in thin film magnetic recording disk media

A study of dc modulation noise as a function of magnetic layer thickness has been conducted for plated longitudinal low-noise Co-alloy disk media with a range of 900 to 1100 Oe. The noise, produced by the application of a reverse longitudinal dc field to a uniformly magnetized disk, supplies data regarding the uniformity of the disk. A spectrum analyzer measures the noise by means of electronic detection, and noise spectra and autocorrelation functions calculated with a model are compared to the experimental results. The model correlates with experimental data to more than 0.99. The maximum distance between effective transitions diminishes from 2.8 microns to 1 micron when the thickness of the magnetic layer is increased from 25 nm to 60 nm. The maximum average transition amplitude is found to be independent of thickness, and is bounded by 0.001 of the saturation magnetization.

Katti, R. R.↗
NASA NTRS2011

What Supergranule Flow Models Tell Us About the Sun's Surface Shear Layer and Magnetic Flux Transport

Models of the photospheric flows due to supergranulation are generated using an evolving spectrum of vector spherical harmonics up to spherical harmonic wavenumber l~1500. Doppler velocity data generated from these models are compared to direct Doppler observations from SOHO/MDI and SDO/HMI. The models are adjusted to match the observed spatial power spectrum as well as the wavenumber dependence of the cell lifetimes, differential rotation velocities, meridional flow velocities, and relative strength of radial vs. horizontal flows. The equatorial rotation rate as a function of wavelength matches the rotation rate as a function of depth as determined by global helioseismology. This leads to the conclusions that the cellular structures are anchored at depths equal to their widths, that the surface shear layer extends to at least 70 degrees latitude, and that the poleward meridional flow decreases in amplitude and reverses direction at the base of the surface shear layer (approx.35 Mm below the surface). Using the modeled flows to passively transport magnetic flux indicates that the observed differential rotation and meridional flow of the magnetic elements are directly related to the differential rotation and meridional flow of the convective pattern itself. The magnetic elements are transported by the evolving boundaries of the supergranule pattern (where the convective flows converge) and are unaffected by the weaker flows associated with the differential rotation or meridional flow of the photospheric plasma.

Hathaway, David↗
NASA NTRS2003

Control of Thermal Convection in Layered Fluids Using Magnetic fields

Immiscible fluid layers are found in a host of applications ranging from materials processing, for example the use of encapsulants in float zone crystal growth technique and a buffer layer in industrial Czochralski growth of crystals to prevent Marangoni convection, to heat transfer phenomena in day-to-day processes like the presence of air pockets in heat exchangers. In the microgravity and space processing realm, the exploration of other planets requires the development of enabling technologies in several fronts. The reduction in the gravity level poses unique challenges for fluid handling and heat transfer applications. The present work investigates the efficacy of controlling thermal convective flow using magnetic fluids and magnetic fields. The setup is a two-layer immiscible liquids system with one of the fluids being a diluted ferrofluid (super paramagnetic nano particles dispersed in carrier fluid). Using an external magnetic field one can essentially dial in a volumetric force - gravity level, on the magnetic fluid and thereby affect the system thermo-fluid behavior. The paper will describe the experimental and numerical modeling approach to the problem and discuss results obtained to date.

Ramachandran, N.↗
NASA NTRS1986

Laboratory observations of ion cyclotron waves associated with a double layer in an inhomogeneous magnetic field

Observations of coherent electrostatic ion cyclotron (EIC) waves associated with a strong, magnetized double layer are presented. The double layers are produced in a weakly ionized argon plasma by applying a positive potential to an electrode plate located in the diverging magnetic field region of a cylindrical plasma column. Ionization within the electrode sheath is essential to the formation of these double layers. The resulting V-shaped potential structures have extended parallel, oblique and perpendicular (to B) electric field components. The frequency of the ion cyclotron instability is dependent upon the magnetic field strength at the position of the parallel potential structure. The properties of EIC waves in the presence of the double layer are discussed in relation to the possible excitation mechanisms (field-aligned currents, ion and electron beams, and perpendicular E fields).

Alport, M. J.↗
NASA NTRS1981

Investigation from Japanese MAGSAT Team. Part A. Crustal structure near Japan and in Antarctic station. Part B. Electric currents and hydromagnetic waves in the ionosphere and the magnetosphere

Preliminary results of MAGSAT data analysis are described. Regional anomaly maps (deviations from the MGST model field) for X,Y,Z, and F in the area of 115 to 155 deg E and 20 to 60 deg N were obtained. A similar map for the geomagnetic total force anomaly in the vicinity of Japan showed that the observed anomaly can be explained by the difference in crustal magnetization between the Japan Sea and the Japan Island, which reflects a difference of 25 km in the thickness of the magnetized layer. The MAGSAT record of a sudden commencement of a magnetic storm above the South Atlantic Ocean showed a reverse impulse particularly in the D-component. Results relating to toroidal currents in the ionosphere, transverse and parallel perturbations over the polar regions, the relationship between field aligned currents and precipitating electrons, and the calculation of the subsatellite electric field are also discussed.

Fukushima, N.↗
NASA NTRS1991

Magnetic Analog Random-Access Memory

Proposed integrated, solid-state, analog random-access memory base on principle of magnetic writing and magnetoresistive reading. Current in writing conductor magnetizes storage layer. Remanent magnetization in storage layer penetrates readout layer and detected by magnetoresistive effect or Hall effect. Memory cells are part of integrated circuit including associated reading and writing transistors. Intended to provide high storage density and rapid access, nonvolatile, consumes little power, and relatively invulnerable to ionizing radiation.

Katti, Romney R.↗
NASA NTRS2004

A Novel, Real-Valued Genetic Algorithm for Optimizing Radar Absorbing Materials

A novel, real-valued Genetic Algorithm (GA) was designed and implemented to minimize the reflectivity and/or transmissivity of an arbitrary number of homogeneous, lossy dielectric or magnetic layers of arbitrary thickness positioned at either the center of an infinitely long rectangular waveguide, or adjacent to the perfectly conducting backplate of a semi-infinite, shorted-out rectangular waveguide. Evolutionary processes extract the optimal physioelectric constants falling within specified constraints which minimize reflection and/or transmission over the frequency band of interest. This GA extracted the unphysical dielectric and magnetic constants of three layers of fictitious material placed adjacent to the conducting backplate of a shorted-out waveguide such that the reflectivity of the configuration was 55 dB or less over the entire X-band. Examples of the optimization of realistic multi-layer absorbers are also presented. Although typical Genetic Algorithms require populations of many thousands in order to function properly and obtain correct results, verified correct results were obtained for all test cases using this GA with a population of only four.

Hall, John Michael↗
NASA NTRS1992

Study Of Dc Modulation Noise In Magnetic Recording Disks

Report discusses dc modulation noise in thin-film magnetic medium on magnetic recording disk. Presents study of statistical and spectral characteristics of noise and describes study of dependence of noise upon applied magnetic field, thickness of magnetic layer, and roughness of surface of layer. DC modulation noise attributed to nucleation of isolated regions of reversal of magnetization in recording medium, and to growth and coalescence of regions with increasing reverse applied magnetic field. Inhomogeneities in magnetic recording media, not roughnesses of surfaces, are dominant sources of noise.

Katti, Romney R.↗
NASA NTRS1997

Contactless Magnetic Slip Ring

A contactless magnetic slip ring is disclosed having a primary coil and a secondary coil. The primary and secondary coils are preferably magnetically coupled together, in a highly reliable efficient manner, by a magnetic layered core. One of the secondary and primary coils is rotatable and the contactless magnetic slip ring provides a substantially constant output.

Kumagai, Hiroyuki↗
NASA NTRS1985

Curie isotherm surfaces inferred from high-altitude magnetic anomaly data

Two-dimensional Curie depth models along two sections across the western United States are derived using an equivalent layer magnetization model derived from Magsat data, and the results are used to constrain finite element thermal models developed by Mayhew and Majer (1980). Regional heat flow variations predicted by the models compare favorably with those inferred from direct measurements. The methodology is applied to upward-continued aeromagnetic data, and the results are found to be in good agreement with previous Curie depth estimates and average measured heat flow.

Mayhew, M. A.↗
NASA NTRS2012

Design of a Laboratory Hall Thruster with Magnetically Shielded Channel Walls, Phase III: Comparison of Theory with Experiment

A proof-of-principle effort to demonstrate a technique by which erosion of the acceleration channel in Hall thrusters of the magnetic-layer type can be eliminated has been completed. The first principles of the technique, now known as "magnetic shielding," were derived based on the findings of numerical simulations in 2-D axisymmetric geometry. The simulations, in turn, guided the modification of an existing 6-kW laboratory Hall thruster. This magnetically shielded (MS) thruster was then built and tested. Because neither theory nor experiment alone can validate fully the first principles of the technique, the objective of the 2-yr effort was twofold: (1) to demonstrate in the laboratory that the erosion rates can be reduced by >order of magnitude, and (2) to demonstrate that the near-wall plasma properties can be altered according to the theoretical predictions. This paper concludes the demonstration of magnetic shielding by reporting on a wide range of comparisons between results from numerical simulations and laboratory diagnostics. Collectively, we find that the comparisons validate the theory. Near the walls of the MS thruster, theory and experiment agree: (1) the plasma potential has been sustained at values near the discharge voltage, and (2) the electron temperature has been lowered by at least 2.5-3 times compared to the unshielded (US) thruster. Also, based on carbon deposition measurements, the erosion rates at the inner and outer walls of the MS thruster are found to be lower by at least 2300 and 1875 times, respectively. Erosion was so low along these walls that the rates were below the resolution of the profilometer. Using a sputtering yield model with an energy threshold of 25 V, the simulations predict a reduction of ~600 at the MS inner wall. At the outer wall ion energies are computed to be below 25 V, for which case we set the erosion to zero in the simulations. When a 50-V threshold is used the computed ion energies are below the threshold at both sides of the channel. Uncertainties, sensitivities and differences between theory and experiment are also discussed.

plasma simulations↗
NASA NTRS1987

Magnetic field draping in the Comet Halley coma - Comparison of Vega observations with computer simulations

During the Vega-1 encounter with Comet Halley, the magnetometer observed draping and compression of the interplanetary magnetic field. These are reproduced well by a three-dimensional MHD simulation of the cometary interaction. Rotations in the magnetic field similar to those at closest approach are also observed 2.75 hours earlier. It is suggested that both rotations correspond to the same IMF interval and that the spacecraft had overtaken the plasma and encountered 'older' magnetic field as it penetrated the coma. Analysis of the MHD model indicates that it should take about 3 to 5 hours for a solar wind parcel to pass from the unperturbed solar wind to Vega-1 at closest approach. A simulated magnetic field profile composed of nested sections for different IMF orientations closely resembles the observations. This result supports the hypothesis of layered magnetic orientations in the coma.

Schwingenschuh, K.↗
NASA NTRS1992

Magnetic field maxima in the low latitude boundary layer

The magnetic field often exhibits a maximum in the earth's low-latitude boundary layer. Examples of this behavior are shown using data from the AMPTE/IRM spacecraft, and it is argued that two fundamentally distinct causes exist for the excess field: (1) a depression, within the layer, of the population of medium-energy ions of magnetospheric origin and (2) field curvature effects associated with undulations of the magnetopause itself.

Sonnerup, B.↗
NASA NTRS1981

Structure, composition and thermal state of the crust in Brazil

Aeromagnetic survey data of the Minas Gerais areas were analyzed and compared with MAGSAT anomaly data. Initially the data set was used to determine the thickness of the magnetized crust. The value obtained is in agreement with crustal models derived from deep seismic sounding and gravity data, indicating that the bottom of the magnetized layer occurs close to the Moho transition. An analysis of the long wavelength pattern indicates that the anomalies form a series of lineations along the magnetic E-W. These are shown to be the result of attenuation. On the MAGSAT total intensity map localized anomalies are superimposed onto an anomaly background formed by alternating positive and negative patches. Implementation and testing of analysis software for MAGSAT data are also discussed.

Pacca, I. I. G.↗