Search NASA⌕ Search

SEARCH · Search NASA

Results for “layered perovskites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Understanding of A-site deficiency in layered perovskites: promotion of dual reaction kinetics for water oxidation and oxygen reduction in protonic ceramic electrochemical cells

Protonic ceramic electrochemical cells (PCECs) are promising solid-state energy conversion devices which enable the conversion of energy between electricity and hydrogen at intermediate temperatures. Rapid conversion between chemical and electrical energy via PCEC technology will assist in overcoming grand challenges in energy storage. To achieve highly efficient reversible operation between hydrogen production and electricity generation, boosting water-oxidation and oxygen reduction activities of the oxygen electrode while maintaining the durable operation is one of the early-stage technical opportunities. In this study, an A-site deficient layered perovskite (PrBa 0.8 Ca 0.2 ) 0.95 Co 2 O 6–δ has been developed as an oxygen electrode for a PCEC which presents superior electrochemical performances. The electrolysis current density reached as high as –0.72 A cm –2 at 1.3 V, and a peak power density of 0.540 W cm –2 was obtained at 600 °C in electrolysis and fuel cell mode, respectively. The PCEC with the new electrode shows good durability under practical operating conditions for 160 hours in both operating modes with no observable degradation. Here, the reversibility between the electrolysis and fuel cell mode is also successfully demonstrated.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Photonic Curing of Nickel Oxide Transport Layer and Perovskite Active Layer for Flexible Perovskite Solar Cells: A Path Towards High-Throughput Manufacturing

High-throughput roll-to-roll (R2R) manufacturing of perovskite solar cells (PSCs) is currently limited by thermal processes that take tens of minutes each, translating to impractically long annealing tools at high web speeds. In addition, PSCs are usually made with metal oxide transport layer materials that require high temperatures for thermal annealing. Here, we demonstrate the fabrication of PSCs using photonic curing, instead of thermal annealing, to convert NiO x directly from sol-gel precursors for hole transport layers and to crystallize methylammonium lead iodide (MAPbI 3 ) active layers on flexible Willow ® Glass substrates. Photonic curing uses short, intense pulses of light to process materials at a high speed, hence it is compatible with R2R manufacturing. We achieved power conversion efficiencies (PCEs) of 11.7% in forward-scan and 10.9% in reverse-scan for PSCs made with photonic cured NiO x and MAPbI 3 films. Furthermore, both NiO x and MAPbI 3 films could be processed with a single photonic curing pulse, with a web speed of 5.7 m/min, and still produce PCEs comparable to thermally annealed control samples. Based on the single-pulse photonic curing condition for each film, we project a web speed of 26 m/min, laying a pathway to high-throughput production of perovskite solar modules.

14 SOLAR ENERGY↗
DOE OSTI2020

Method for forming perovskite layers using atmospheric pressure plasma

Improved deposition of optoelectronically active perovskite materials is provided with a two step process. In the first step, precursors are deposited on a substrate. In the second step, the deposited precursors are exposed to an atmospheric pressure plasma which efficiently cures the precursors to provide the desired perovskite thin film. The resulting films can have excellent optical properties combined with superior mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Substrate-Controlled Electronic Properties of Perovskite Layer in Lateral Heterojunction Configuration

In this work, we fabricated halide perovskite-based lateral heterojunction devices with nickel oxide/titanium oxide all back contacts, allowing us to access the perovskite surface directly for analysis with various advanced techniques, including ultraviolet and X-ray photoemission spectroscopy (UPS/XPS), Kelvin probe force microscopy (KPFM), and surface photovoltage (SPY), to discern the role of selective contacts. Specifically, by tuning of the selectivity of the contacts, e.g., through varying the level of nickel oxidation, we show that the selectivity of the contacts induces a gradient in carrier concentration across the surface of the active layer that is connected to carrier extraction at the buried interface and hence to device functionality.

carrier concentration↗
DOE OSTI2020

Structure, Morphology, and Photovoltaic Implications of Halide Alloying in Lead-Free Cs 3 Sb 2 Cl x I 9-x 2D-Layered Perovskites

Compositional tuning has been a major driving force behind the excellent optoelectronic properties observed in typical Pb-based perovskites. For lead-free perovskite derivatives, a challenge to understanding the connection between compositional tuning and intrinsic optoelectronic properties, hence a barrier towards boosting their performance, comes from the fact that multiple crystalline substructures can form based on composition, film processing, or both. Especially with lower dimensional (0D, 1D, 2D) substructures, the particular polymorph present in the film can be a greater determinant of optoelectronic properties than the composition itself. Herein, we report a simple method to alloy the halide site in all-inorganic lead-free Cs 3 Sb 2 I 9 films while maintaining a consistent 2D-layered substructure, as a means to independently study the photovoltaic implications of halide substitution. We use a broad suite of spectroscopy and device measurements to identify an optimal stoichiometric substitution of chloride for iodide (~ 8 mol%, measured) that balances both intrinsic and bulk optoelectronic properties to achieve a top power conversion efficiency of 2.2%. This work underscores the importance of controlling substructure while investigating the impacts of compositional tuning for the development of lead-free perovskites, and more broadly validates the approach towards realizing lead-free alternative perovskite solar technologies.

14 SOLAR ENERGY↗
DOE OSTI2020

Low-frequency Raman spectrum of 2D layered perovskites: Local atomistic motion or superlattice modes?

We report the low-frequency Raman spectrum (ω = 10 cm -1 –150 cm -1 ) of a wide variety of alkylammonium iodide based 2D lead halide perovskites (2D LHPs) as a function of A-site cation (MA = methylammonium and FA = formamidinium), octahedral layer thickness (n = 2–4), organic spacer chain length (butyl-, pentyl-, hexyl-), and sample temperature (T = 77 K–293 K). Using density functional theory calculations under the harmonic approximation for n = 2 BA:MAPbI, we assign several longitudinal/transverse optical phonon modes between 30 cm -1 and 100 cm -1 , the eigen displacements of which are analogous to that observed previously for octahedral twists/distortions in bulk MAPbI. Additionally, we propose an alternative assignment for low-frequency modes below this band (<30 cm -1 ) as zone-folded longitudinal acoustic phonons corresponding to the periodicity of the entire layered structure. Furthermore, we compare measured spectra to predictions of the Rytov elastic continuum model for zone-folded dispersion in layered structures. Our results are consistent across the various 2D LHPs studied herein, with energetic shifts of optical phonons corresponding to microscopic structural differences between materials and energetic shifts of acoustic phonons according to changes in the periodicity and elastic properties of the perovskite/organic subphases. This study highlights the importance of both the local atomic order and the superlattice structure on the vibrational properties of layered 2D materials.

2D materials↗
DOE OSTI2022

Photoinduced iodide repulsion and halides-demixing in layered perovskites

Mixing halides in metal halide perovskites (MHPs) is an effective approach for adjusting the MHPs bandgap for applications in tandem solar cells. However, mixed-halide (MH-) MHPs undergo light-induced phase segregation (LIPS) under continuous illumination. Therefore, understanding the mechanism of LIPS is necessary for developing stable MH-MHPs. Here, we investigated LIPS in layered (L) MHPs and discovered a critical role of spacer cations in LIPS. Through probing chemical changes of LIPS, we unveil light-induced iodide repulsion and the formation of Br-rich-phase in illuminated regions during LIPS. This discovery also gives insight into the LIPS process in three-dimensional (3D) MHPs. By further investigating LIPS in 3D MHPs, we reveal that LIPS induces not only the formation of Br-rich and I-rich domains but also an overall change of halide distribution along the film thickness direction. Furthermore, LIPS is more significant in bulk due to a larger population of photogenerated charge carriers. Overall, this study reveals the chemical mechanism of LIPS in MHPs and its potential effect on device performance, offering insight into understanding the LIPS mechanism and improving the stability of MHPs.

36 MATERIALS SCIENCE↗