Search NASA⌕ Search

SEARCH · Search NASA

Results for “lead sulfide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A filter spectrometer concept for facsimile cameras

A concept which utilizes interference filters and photodetector arrays to integrate spectrometry with the basic imagery function of a facsimile camera is described and analyzed. The analysis considers spectral resolution, instantaneous field of view, spectral range, and signal-to-noise ratio. Specific performance predictions for the Martian environment, the Viking facsimile camera design parameters, and a signal-to-noise ratio for each spectral band equal to or greater than 256 indicate the feasibility of obtaining a spectral resolution of 0.01 micrometers with an instantaneous field of view of about 0.1 deg in the 0.425 micrometers to 1.025 micrometers range using silicon photodetectors. A spectral resolution of 0.05 micrometers with an instantaneous field of view of about 0.6 deg in the 1.0 to 2.7 micrometers range using lead sulfide photodetectors is also feasible.

Jobson, D. J.↗
NASA NTRS1976

Image intensifier tube observations of the OH airglow during the Space Shuttle simulation

The OH airglow studies discussed have evolved from a lead-sulfide-cell scanning photometer to photographic techniques to, currently, image-tube photography. During the Space Shuttle Simulation, photography (35-mm and 16-mm) and filter-wheel photometry of submicron OH airglow were performed aboard the NASA CV990 Airborne Laboratory. Examples of ground-based and airborne photographs are presented for comparison. Analysis of the aircraft data is described.

Peterson, A. W.↗
NASA NTRS1980

The GSFC Mark-2 three band hand-held radiometer

A self-contained, portable, hand-radiometer designed for field usage was constructed and tested. The device, consisting of a hand-held probe containing three sensors and a strap supported electronic module, weighs 4 1/2 kilograms. It is powered by flashlight and transistor radio batteries, utilizes two silicon and one lead sulfide detectors, has three liquid crystal displays, sample and hold radiometric sampling, and its spectral configuration corresponds to LANDSAT-D's thematic mapper bands. The device was designed to support thematic mapper ground-truth data collection efforts and to facilitate 'in situ' ground-based remote sensing studies of natural materials. Prototype instruments were extensively tested under laboratory and field conditions with excellent results.

Tucker, C. J.↗
NASA NTRS1981

High spectral resolution airborne spectrometry

An airborne spectroradiometer system developed at Columbia University has been providing new spectral data for use in remote sensing for natural resources. The system has been improved by addition of a solid state silicon detector array, and has been extended into the infrared by addition of a 64 element lead sulfide detector array. The infrared data in the 2000 to 2500 nm region especially holds large potential for mineral and oil exploration.

Collins, W.↗
NASA NTRS1991

Results of the TTF-TCNQ- and the calcium carbonate-crystallization on the Long Duration Exposure Facility

Experiment AO139A on the Long Duration Exposure Facility (LDEF) carried four large containers into orbit for five years with crystal growth solutions for lead sulfide, calcium carbonate, and tetra thiafulvalene- tetra cyanoquino methane (TTF-TCNQ). The LDEF was in excellent condition after the long orbital stay, and although the temperature data was lost, the experiment program had been working since the valves in all containers were opened. All four experiments produced crystals; however, they were of varying quality. The calcium carbonate crystals had the best appearance. The TTF-TCNQ crystals were packed together near the valve openings of the container. When taken apart, the single crystals showed some unusual morphological properties. X-ray investigations as well as conductivity measurements on the long duration space grown TTF-TCNQ crystals are presented, and pictures of the calcium carbonate are shown. Comparisons are made with previous space solution growth experiments on the European Spacelab Mission and the Apollo-Soyuz Test Project.

Nielsen, Kjeld Flemming↗
NASA NTRS1990

Acousto-optic tunable filter field spectrometer for validation of airborne and spaceborne imaging spectrometers

A new concept for a field portable spectrometer designed to meet the needs of the remote sensing community is presented. This instrument uses acoustooptic tunable filters (AOTFs) as wavelength sorters, allowing the design of a rugged, compact, light-weight tool that provides broad spectral coverage, great versatility, and ease of utilization. The spectrometer provides continuous spectral coverage from 0.4 to 2.5 microns with two channels defined by detector technology, while a visible channel covering the 0.4 to 1.0 micron spectral range uses silicon PV photodiodes. The short-wavelength IR channel covers the 0.9 to 2.5 micron special range with thermoelectrically cooled lead sulfide PC detectors.

Rider, David M.↗
NASA NTRS1992

Results of the TTF-TCNQ and the calcium carbonate crystallization on the Long Duration Exposure Facility

Experiment A0139A on the Long Duration Exposure Facility (LDEF) carried four large containers into orbit five years with crystal growth solutions for lead sulfide, calcium carbonate, and TTF-TCNQ. Although temperature data was lost, the experimental program had been working since the valves in all containers had been opened. All four experiments produced crystals of varying quality. The calcium carbonate crystals had the best appearance. The TTF-TCNQ crystals were packed together near the valve openings of the container. When taken apart, the single crystals showed some unusual morphological properties. X ray investigations as well as conductivity measurements on long duration space grown TTF-TCNQ crystals will be presented. Comparisons will be made with our previous space solution growth experiments. The TTF-TCNQ crystals are no longer of the highest interest, so this activity has been terminated in favor of calcium carbonate and calcium phosphate crystallizations.

Nielsen, Kjeld Flemming↗
NASA NTRS1982

Method and apparatus for instantaneous band ratioing in a reflectance radiometer

A hand-held instrument is provided to compare information from selected infrared and visible bands in the 0.4 to 2.5 micrometer range, to perform ratioing via a dividing circuit (17) and to directly read out, via a display system (18), ratio values in a continuous digital display. The dual-beam, ratioing radiometer contains two optical trains (10, 12), each having two repeater lenses (L1a, L1b and L2a, L2b) and a cooled lead sulfide detector (D1, D2). One of the trains (10) is pivotal to facilitate measurements at distances ranging from about 1 meter to infinity. The optical trains are intersected by a set of two coaxially-mounted filter wheels (F1, F2), each containing up to five interference filters and slits to pass radiation filtered by the other. Filters with band passes as narrow as 0.01 micrometer are used in the region 0.4 to 2.5 micrometers. The total time for a calibration and measurement is only a few seconds. It is known from previous field studies using prior art devices, that materials, e.g., clay minerals, and carbonate minerals such as limestone, have unique spectral properties in the 2.0 to 2.5 micrometer region. Using properly chosen spectral filters, and ratioing the signals to remove the effect of topography on the brightness measured, the instrument can be used for real-time analysis of reflecting materials in the field. Other materials in the broader range of 0.4 to 2.5 micrometers (and even beyond) could be similarly identified once the reflectance spectrum of the material is established by any means.

Goetz, Alexander F. H.↗
NASA NTRS1994

The production of 34S-depleted sulfide during bacterial disproportionation of elemental sulfur

Bacteria that disproportionate elemental sulfur fractionate sulfur isotopes such that sulfate is enriched in sulfur-34 by 12.6 to 15.3 per mil and sulfide is depleted in sulfur-34 by 7.3 to 8.6 per mil. Through a repeated cycle of sulfide oxidation to S0 and subsequent disproportionation, these bacteria can deplete sedimentary sulfides in sulfur-34. A prediction, borne out by observation, is that more extensive sulfide oxidation will lead to sulfides that are more depleted in sulfur-34. Thus, the oxidative part of the sulfur cycle creates circumstances by which sulfides become more depleted in sulfur-34 than would be possible with sulfate-reducing bacteria alone.

Non-NASA Center↗
NASA NTRSDate not supplied

Calcium and Magnesium Distribution Between Sulfide and Silicate Melts: Thermodynamic Modeling and Insights into Mercury's Mantle-Crust Differentiation

Mercury stands out as the terrestrial planet with the lowest degree of oxidation among all planets of our solar system. It is characterized by a high abundance of sulfur, which is expected to replace oxygen in silicate melts. This sulfur enrichment could lead to sulfide saturation in its mantle, potentially resulting in the formation of sulfides rich in calcium and magnesium. Utilizing experimental data from the literature, we constructed a thermodynamic model to explore the partitioning of calcium and magnesium between sulfide and silicate melts. This model aims to improve our comprehension of the chemical equilibria driving the process of mantle-crust differentiation on Mercury. Our models indicate that increased temperature, decreased pressure, and low concentrations of iron, oxygen, and carbon within the sulfide phase, along with low sulfur concentrations in the silicate phase, favor calcium’s partitioning into the sulfide. Additionally, magnesium partitioning into the sulfide melt is favored with decreased pressure, decreased temperature, low concentrations of iron and calcium within the sulfide, and low concentrations of sulfur within the silicate. Our results suggest that up 9.4% and 5.6% Ca and Mg, respectively, can be present in sulfides equilibrated with sulfide-saturated silicate melts during mantle-crust differentiation. Further investigation will focus on the distribution of sulfide phases within the mantle and crust to better constrain Mercury’s internal structure.

Taylor McCombs↗
NASA NTRS1978

Critical currents in sputtered PbMo6S8

Critical currents in sputtered Chevrel-phase lead molybdenum sulfide have been measured at several temperatures as a function of applied magnetic field up to 19 T. A critical current density of approximately 50 million A/sq m was obtained at 15 T and 1.8 K, and the effective upper critical field was estimated to be 30 T. The pinning force at low fields was found to be dependent on the amount of free lead.

Alterovitz, S. A.↗
NASA NTRS1992

Mars surface weathering products and spectral analogs: Palagonites and synthetic iron minerals

There are several hypotheses regarding the formation of Martian surface fines. These surface fines are thought to be products of weathering processes occurring on Mars. Four major weathering environments of igneous rocks on Mars have been proposed; (1) impact induced hydrothermal alterations; (2) subpermafrost igneous intrusion; (3) solid-gas surface reactions; and (4) subaerial igneous intrusion over permafrost. Although one or more of these processes may be important on the Martian surface, one factor in common for all these processes is the reaction of solid or molten basalt with water (solid, liquid, or gas). These proposed processes, with the exception of solid-gas surface reactions, are transient processes. The most likely product of transient hydrothermal processes are layer silicates, zeolites, hydrous iron oxides and palagonites. The long-term instability of hydrous clay minerals under present Martian conditions has been predicted; however, the persistence of such minerals due to slow kinetics of dehydration, or entrapment in permafrost, where the activity of water is high, can not be excluded. Anhydrous oxides of iron (e.g., hematite and maghemite) are thought to be stable under present Martian surface conditions. Oxidative weathering of sulfide minerals associated with Martian basalts has been proposed. Weathering of sulfide minerals leads to a potentially acidic permafrost and the formation of Fe(3) oxides and sulfates. Weathering of basalts under acidic conditions may lead to the formation of kaolinite through metastable halloysite and metahalloysite. Kaolinite, if present, is thought to be a thermodynamically stable phase at the Martian surface. Fine materials on Mars are important in that they influence the surface spectral properties; these fines are globally distributed on Mars by the dust storms and this fraction will have the highest surface area which should act as a sink for most of the absorbed volatiles near the surface of Mars. Therefore, the objectives of this study were to: (1) examine the fine fraction mineralogy of several palagonitic materials from Hawaii; and (2) compare spectral properties of palagonites and submicron sized synthetic iron oxides with the spectral properties of the Martian surface.

Golden, D. C.↗
NASA NTRS2012

Experimental Investigation into the Radar Anomalies on the Surface of Venus

Radar mapping of thc surface of Venus shows areas of high reflectivity (low emissivity) in the Venusian highlands at altitudes between 2.5-4.75 kilometers. The origin of the radar anomalies found in the Venusian highlands remains unclear. Most explanations of the potential causes for these radar anomalies come from theoretical work. Previous studies suggest increased surface roughness or materials with higher dielectric constants as well as surface atmospheric interactions. Several possible candidates of high-dielectric materials are tellurium) ferroelectric materials, and lead or bismuth sulfides. While previous studies have been influential in determining possible sources for the Venus anomalies, only a very few hypotheses have been verified via experimentation. This work intends to experimentally constrain the source of the radar anomalies on Venus. This study proposes to investigate four possible materials that could potentially cause the high reflectivities on the surface of Venus and tests their behavior under simulated Venusian conditions.

Kohler, E.↗
NASA NTRS2006

Thermal Constraints from Siderophile Trace Elements in Acapulcoite-Lodranite Metals

A fundamental process in the formation of differentiated bodies is the segregation of metal-sulfide and silicate phases, leading to the formation of a metallic core. The only known direct record of this process is preserved in some primitive achondrites, such as the acapulcoite-lodranites. Meteorites of this clan are the products of thermal metamorphism of a chondritic parent. Most acapulcoites have experienced significant partial melting of the metal-sulfide system but not of silicates, while lodranites have experienced partial melting and melt extraction of both. The clan has experienced a continuum of temperatures relevant to the onset of metal mobility in asteroidal bodies and thus could yield insight into the earliest stages of core formation. Acapulcoite GRA 98028 contains relict chondrules, high modal sulfide/metal, has the lowest 2-pyroxene closure temperature, and represents the least metamorphosed state of the parent body among the samples examined. Comparison of the metal-sulfide component of other clan members to GRA 98028 can give an idea of the effects of metamorphism.

Herrin, Jason S.↗
NASA NTRS2006

Tracking the Early Thermal History of Asteroids with Trace Siderophiles in Meteorite Metals

A fundamental process in the formation of differentiated bodies is the segregation of metal-sulfide and silicate phases, leading to the formation of a metallic core. The only known direct record of this process is preserved in some primitive achondrites, such as the acapulcoites and lodranites. These meteorites, thought to originate from the same parent asteroid, are the products of thermal metamorphism and igneous processing of a chondritic precursor. Collectively, they have experienced a range of peak metamorphic temperatures relevant to the onset of metal-sulfide partial melting and melt migration. We assessed the siderophile element composition of their metals in an effort to determine the conditions and extent of metal-sulfide melt extraction and thereby gain insight into the earliest stages of core formation.

Herrin, J. S.↗
NASA NTRS2006

Metal-Silicate Segregation in Asteroidal Meteorites

A fundamental process of planetary differentiation is the segregation of metal-sulfide and silicate phases, leading eventually to the formation of a metallic core. Asteroidal meteorites provide a glimpse of this process frozen in time from the early solar system. While chondrites represent starting materials, iron meteorites provide an end product where metal has been completely concentrated in a region of the parent asteroid. A complimentary end product is seen in metal-poor achondrites that have undergone significant igneous processing, such as angrites, HED's and the majority of aubrites. Metal-rich achondrites such as acapulcoite/lodranites, winonaites, ureilites, and metal-rich aubrites may represent intermediate stages in the metal segregation process. Among these, acapulcoite-lodranites and ureilites are examples of primary metal-bearing mantle restites, and therefore provide an opportunity to observe the metal segregation process that was captured in progress. In this study we use bulk trace element compositions of acapulcoites-lodranites and ureilites for this purpose.

Herrin, Jason S.↗
NASA NTRSDate not supplied

Assimilation of Fossil Hydrothermal Sulfide by Early Amazonian Martian Magmas: Implications for Ore Mineralization on Mars

Martian magmas would interact with any hydrosphere present, whether a global ocean [e.g., 1] or an icy (subterranean) hydrosphere [2] creating hydrothermal systems. Volcanogenic massive sulfide (VMS) ores, with Fe-Zn-Pb sulfides, created by hydrothermal deposition associated with a wide range of volcanism would be expected on Mars [3]. Similar to terrestrial komatiites, martian igneous rocks could generate orthomagmatic Ni-sulfide ore deposits by immiscible sulfide liquid segregation [4]. For this to occur, a martian magma would need to flow over (or intrude into) a pre-existing sulfur-rich formation. Here, we elaborate on the first evidence [5-6] of potential orthomagmatic mineralization in two Early Amazonian (2.4 Ga) igneous meteorites [7-8] involving a threestep process: i) formation of Fe-Zn-Pb sulfides, (ii) assimilated by the 2.4 Ga magmas leading to (iii) formation of orthomagmatic Ni-sulfide deposits. These deposits may remain on Mars, but the telltale signs of Zn-Pb enrichment and Ni-Co depletion in the two meteorites provide important insights into martian geology.

M Humayun↗