Search NASA⌕ Search

SEARCH · Search NASA

Results for “magnetic layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Elastic Distribution of Microshutters, Measurements Obtainable on James Web Space Telescope

Spectrographic astronomy measurements in the near-infrared region will be done by functional two-dimensional microshutter arrays that are being fabricated at the NASA Goddard Space Flight Center for the James Webb Space Telescope (JWST). These micro-shutter arrays will represent the first mission-critical MEMS devices to be flown in space. JWST will use microshutter arrays to select focal plane object. 2-D programmable aperture masks of more than 200,000 elements select such space object. The use of silicon wafer material promises high efficiency and high contrast. Microshutter operation temperature is around 35K. Microshutter arrays are fabricated as close-packed silicon nitride membranes with a unit cell size of 105 x 204 micrometers. A layer of magnetic material is deposited onto each shutter. Individual shutters are equipped with a torsion flexure. Reactive ion etching (RIE) releases the shutters so they can open up to 90 degrees using the torsion flexure. Shutter rotation is initiated into a silicon support structure via an external magnetic field. Two electrically independent aluminum electrodes are deposited, one onto each shutter and another onto the support structure side-wall, permitting electrostatic latching and 2-D addressing to hold specific shutters open via external electronics.

Kletetschka, Gunther↗
DOE OSTI2025

Evolution from topological Dirac metal to flat-band-induced antiferromagnet in layered K x Ni 4 S 2 (0 ≤ x ≤ 1)

Condensed matter systems with coexisting Dirac cones and flat bands and a switchable control between them within a single system are desirable but remarkably uncommon. Here, we report a layered quantum material system, K x Ni 4 S 2 (0 <= x <= 1), that simultaneously hosts both characteristics without involving typical Kagome/honeycomb lattices. Enabled by a topochemical K-deintercalation process, the Fermi surface can be fine-tuned continuously over a wide range of energies. Consequently, a non-magnetic Dirac-metal state with a topological nontrivial Z 2 index of 1;(000), supported by first-principles calculations and high mobility up to 1,471 cm 2 V -1 s -1 , is observed on the K-rich x = 1 side, whereas a flat-band-induced antiferromagnetic state with T N up to 10.1 K emerges as the K-content approaches 0. The K x Ni 4 S 2 system offers a versatile platform for exploring emerging phenomena and underscores aviable pathway for in situ control of quantum materials dominated by Dirac cones, flat bands, and their interplay.

dirac metal↗
DOE OSTI2021

Spin Reorientation in Antiferromagnetic Layered FePt 5 P

FePt 5 P, a substitutional variant of the anti-CeCoIn 5 structure type in the space group P4/mmm, was synthesized by a high-temperature solid-state method and structurally characterized by X-ray diffraction. FePt 5 P contains layers of FePt 12 clusters formed by magnetically active Fe and heavy Pt with strong spin-orbit coupling (SOC); the layers are separated by P atoms. The various Fe–Pt distances in FePt 12 clusters generate complex magnetic orders in FePt 5 P. According to temperature-dependent magnetic and specific heat measurements, FePt 5 P shows a stripe-type antiferromagnetic order at T N ≈ 90 K, which is also confirmed by resistivity measurements. Furthermore, a spin reorientation occurs at ~74 and ~68 K in and out of the ab plane based on the specific heat measurements. The temperature-dependent neutron powder diffraction patterns demonstrate the antiferromagnetic order in FePt 5 P, and the spins orientate up to 58.4° with respect to the c axis at 10 K. First-principles calculations of FePt 5 P show the band splitting at the Fermi level by strong SOC and the s–d hybridization between P and Fe/Pt electrons enhances the structural stability and affects the magnetic ordering.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Cryogenic Characterization and Testing of Magnetically-Actuated Microshutter Arrays for the James Webb Space Telescope

Two-dimensional MEMS microshutter arrays (MSA) have been fabricated at the NASA Goddard Space Flight Center (GSFC) for the James Webb Space Telescope (JWST) to enable cryogenic (approximately 35 K) spectrographic astronomy measurements in the near-infrared region. Functioning as a focal plane object selection device, the MSA is a 2-D programmable aperture mask with fine resolution, high efficiency and high contrast. The MSA are close- packed silicon nitride shutters (cell size of 100 x 200 microns) patterned with a torsion flexure to allow opening to 90 degrees. A layer of magnetic material is deposited onto each shutter to permit magnetic actuation. Two electrodes are deposited, one onto each shutter and another onto the support structure side-wall, permitting electrostatic latching and 2-D addressing. New techniques were developed to test MSA under mission-similar conditions (8 K less than or equal to T less than 300K). The magnetic rotisserie has proven to be an excellent tool for rapid characterization of MSA. Tests conducted with the magnetic rotisserie method include accelerated cryogenic lifetesting of unpackaged 128 x 64 MSA and parallel measurement of the magneto-mechanical stiffness of shutters in pathfinder test samples containing multiple MSA designs. Lifetest results indicate a logarithmic failure rate out to approximately 10(exp 6) shutter actuations. These results have increased our understanding of failure mechanisms and provide a means to predict the overall reliability of MSA devices.

King, T. T.↗
NASA NTRS2004

Magnetic Fields of the Earth and Mars a Comparison and Discussion

In several aspects the magnetic fields of the Earth and Mars are similar but also different. In the past both bodies had planetary magnetic fields but while they Earth's field remains today the Martian ceased to operate, at some unknown time in the past, leaving this planet without a main or core field. This fact resulted in the interaction between the solar and interplanetary magnetic fields with the surfaces of these planets being very different. In addition, Mars has large crustal magnetic anomalies, nearly ten times larger than those on the Earth. Since crustal magnetic anomalies are the product of the thickness of the layer of magnetization, both the magnetizing material and the thickness of the layer of this material must be very different on Mars than Earth. Furthermore, the martian anomalies can only be produced by remanent or fossil magnetization, in contrast with the Earth where both induced and remanent magnetization are producing these anomalies. Crustal magnetic anomalies on the Earth are mainly produced by single-domain, irontitanium oxides, in the form of magnetite being the most common on Mars the main magnetic mineral(s) are unknown. The thickness of the martian magnetized layer in comparison with the Earth remains a major area for research. Determining the paleopole position for the Earth has been done by some of the earliest paleomagnetic researchers. Since we do not have oriented martian rock samples determining the paleopoles for Mars has been done by fitting a magnetization vector to individual magnetic anomalies. Several groups have worked on this problem with somewhat differing results.

Taylor, Patrick T.↗
DOE OSTI2022

Strong Zeeman splitting in orbital-hybridized valleytronic interfaces

We report stacked heterointerfaces of two-dimensional (2D) materials are well-suited to obtain novel electronic functionality at small length scales, because the intrinsic properties of both materials can be blended by interlayer coupling with remarkable effects on the electronic band structure. In particular, band degeneracy at the K and K' Brillouin zone valleys of 2D materials can be broken by symmetry reductions by applying an external magnetic field, with possible application in valleytronic devices. Nevertheless, this usually requires impractically large external magnetic fields > 100 T. An alternative and more practical route is provided via stacking a non-centrosymmetric layered material on a magnetic substrate to induce valley splitting through the magnetic proximity effect; however, the splitting magnitude can vary sharply between similar interfaces. In this work, first-principle calculations are used to calculate the valley splitting of eight low-strain interfaces with transition metal dichalcogenides stacked on 2D magnetic substrates. It is shown that the interlayer band hybridization plays a major role when the two layers’ bands are closely aligned in energy, with the resulting band repulsion and the total valley splitting being strongly dependent on the Hubbard U correction , showing up to an order of magnitude change. The WSe 2 /CrGeTe 3 interface in particular shows strong interlayer interactions, which can potentially lead to a significantly high valley splitting of 26 meV; however further experimental investigations will be needed to resolve uncertainties in the predicted valley splitting.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic functionalization and catalytic behavior of magnetic nanoparticles during laser photochemical graphitization of polyimide

We report laser-assisted photochemical graphitization of polyimides (PIs) into functional magnetic nanocomposites using laser irradiation of PI in the presence of magnetite nanoparticles (MNPs). PI Kapton sheets covered with MNP were photochemically treated under ambient conditions using a picosecond pulsed laser (1064 nm) to obtain an electrically conductive material. Scanning electron microscopy of the treated material revealed a layered magnetic nanoparticle/graphite (MNP/graphite) nanocomposite structure. Four probe conductivity measurements indicated that the nanocomposite has an electrical conductivity of 1550 ± 60 S/m. Superconducting quantum interference device magnetometer-based magnetic characterization of the treated material revealed an anisotropic ferromagnetic response in the MNP/graphite nanocomposite compared to the isotropic response of MNP. Raman spectroscopy of the MNP/graphite nanocomposite revealed a fourfold improvement in graphitization, suppression in disorder, and decreased nitrogenous impurities compared to the graphitic material obtained from laser treatment of just PI sheets. X-ray photoelectron spectroscopy, x-ray diffraction, and energy-dispersive x-ray spectroscopy were used to delineate the phase transformations of MNP during the formation of MNP/graphite nanocomposite. Post-mortem characterization indicates a possible photocatalytic effect of MNP during MNP/graphite nanocomposite formation. Under laser irradiation, MNP transformed from the initial Fe 3 O 4 phase to γ-Fe 2 O 3 and Fe 5 C 2 phases and acted as nucleation spots to catalyze the graphitization process of PI.

36 MATERIALS SCIENCE↗
DOE OSTI2024

3D Heisenberg universality in the van der Waals antiferromagnet NiPS 3

Van der Waals (vdW) magnetic materials are comprised of layers of atomically thin sheets, making them ideal platforms for studying magnetism at the two-dimensional (2D) limit. These materials are at the center of a host of novel types of experiments, however, there are notably few pathways to directly probe their magnetic structure. We confirm the magnetic order within a single crystal of NiPS 3 and show it can be accessed with resonant elastic X-ray diffraction along the edge of the vdW planes in a carefully grown crystal by detecting structurally forbidden resonant magnetic X-ray scattering. We find the magnetic order parameter has a critical exponent of β ~ 0.36, indicating that the magnetism of these vdW crystals is more adequately characterized by the three-dimensional (3D) Heisenberg universality class. We verify these findings with first-principles density functional theory, Monte-Carlo simulations, and density matrix renormalization group calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unconventional unidirectional magnetoresistance in heterostructures of a topological semimetal and a ferromagnet

Unidirectional magnetoresistance (UMR) in a bilayer heterostructure, consisting of a spin-source material and a magnetic layer, refers to a change in the longitudinal resistance on the reversal of magnetization and originates from the interaction of non-equilibrium spin accumulation and magnetization at the interface. Since the spin polarization of an electric-field-induced non-equilibrium spin accumulation in conventional spin-source materials is restricted to be in the film plane, the ensuing UMR can only respond to the in-plane component of magnetization. However, magnets with perpendicular magnetic anisotropy are highly desired for magnetic memory and spin-logic devices, whereas the electrical read-out of perpendicular magnetic anisotropy magnets through UMR is critically missing. Here, in this study, we report the discovery of an unconventional UMR in the heterostructures of a topological semimetal (WTe 2 ) and a perpendicular magnetic anisotropy ferromagnetic insulator (Cr 2 Ge 2 Te 6 ), which allows to electrically read the up and down magnetic states of the Cr 2 Ge 2 Te 6 layer through longitudinal resistance measurements.

Kao, I-Hsuan [Carnegie Mellon Univ., Pittsburgh, P↗
DOE OSTI2023

Layer-Dependent Magnetism and Spin Fluctuations in Atomically Thin van der Waals Magnet CrPS 4

van der Waals (vdW) magnets, an emerging family of two-dimensional (2D) materials, have received tremendous attention due to their rich fundamental physics and significant potential for cutting-edge technological applications. In contrast to the conventional bulk counterparts, vdW magnets exhibit significant tunability of local material properties, such as stacking engineered interlayer coupling and layer-number dependent magnetic and electronic interactions, which promise to deliver previously unavailable merits to develop multifunctional microelectronic devices. As a further ingredient of this emerging topic, here we report nanoscale quantum sensing and imaging of atomically thin vdW magnet chromium thiophosphate CrPS 4 , revealing its characteristic layer-dependent 2D static magnetism and dynamic spin fluctuations. We also show a large tunneling magnetoresistance in CrPS 4 -based spin filter vdW heterostructures. Here, the excellent material stability, robust strategy against environmental degradation, in combination with tailored magnetic properties highlight the potential of CrPS 4 in developing state-of-the-art 2D spintronic devices for next-generation information technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Self-Cooling Multiferroic Magnetic Devices

Increasing switching frequency reduces magnetic volume, but conventional ferrites, used from tens to hundreds of kilohertz, cannot sustain the temperature and frequency ranges demanded by current and emerging wide bandgap and ultrawide bandgap devices. Here, this work presents a novel magnetic material architecture combining nanocrystalline magnetic material and multiferroic layers for megahertz power conversion. The high saturation flux density of nanocrystalline alloys supports miniaturization but is traditionally constrained by excessive losses above 10 kHz. A revolutionary multiferroic material with solid-state cooling via caloric materials is defined that will enable the next generation of magnetic devices for wide-bandgap-integrated designs. This letter highlights the fundamental physics behind this capability alongside early development of a finite element analysis for the multiferroic-based magnetic device using ANSYS, showing that the core achieves more uniform thermal distribution and reduces peak temperature by 9 ° C compared to conventional ferrites.

Soft magnetic materials↗
DOE OSTI2024

Unconventional pressure-induced magnetic transitions and mechanical properties in non-magnetic LaFeSi

Here, this work demonstrates that two consecutive magnetic transitions occur in non-magnetic LaFeSi compound under negative hydrostatic pressure (small volume expansion). Electronic structure properties of LaFeSi were calculated using density functional theory (DFT) to understand the origin of these magnetic transitions. Mechanical properties of LaFeSi, especially elastic properties (shear and Young’s modulus, and Poisson’s ratio), were determined by DFT distortion calculations to elucidate lattice anisotropy and stability. The antiferromagnetic transition at –7.52 GPa, predicted in our work for LaFeSi, is consistent with the reported experimentally observed antiferromagnetic ground states in CeMnSi and LaMnSi compounds having similar crystal geometry. This finding of unexpected magnetic ordering predicts that layered non-magnetic materials, like LaFeSi, may become magnetically active with lattice expansion.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A hybrid topological quantum state in an elemental solid

Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three important research directions: (1) the competition between distinct interactions, as in several intertwined phases, (2) the interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and (3) the coalescence of several topological orders to generate distinct novel phases. The first two examples have grown into major areas of research, although the last example remains mostly unexplored, mainly because of the lack of a material platform for experimental studies. Here, using tunnelling microscopy, photoemission spectroscopy and a theoretical analysis, we unveil a ‘hybrid’ topological phase of matter in the simple elemental-solid arsenic. Through a unique bulk-surface-edge correspondence, we uncover that arsenic features a conjoined strong and higher-order topology that stabilizes a hybrid topological phase. Although momentum-space spectroscopy measurements show signs of topological surface states, real-space microscopy measurements unravel a unique geometry of topologically induced step-edge conduction channels revealed on various natural nanostructures on the surface. Using theoretical models, we show that the existence of gapless step-edge states in arsenic relies on the simultaneous presence of both a non-trivial strong Z 2 invariant and a non-trivial higher-order topological invariant, which provide experimental evidence for hybrid topology. Finally, our study highlights pathways for exploring the interplay of different band topologies and harnessing the associated topological conduction channels in engineered quantum or nano-devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Systems and methods for additive manufacturing magnetic solenoids

Systems and methods for forming a magnetically-enabled part via additive manufacturing. The method includes depositing a layer of additive manufacturing material on a build plate, melting or sintering the layer of additive manufacturing material, depositing additional layers of additive manufacturing material on previous layers of additive manufacturing material, the additive manufacturing material of at least some of the additional layers being magnetically permeable, and melting or sintering the additional layers of additive manufacturing material such that the magnetically-enabled part has a transition region including at least some of the magnetically permeable additive manufacturing material.

Hatch, Jonathan Douglas↗
DOE OSTI2024

Systems and methods for additive manufacturing magnetic solenoids

Systems and methods for forming a magnetically-enabled part via additive manufacturing. The method includes depositing a layer of additive manufacturing material on a build plate, melting or sintering the layer of additive manufacturing material, depositing additional layers of additive manufacturing material on previous layers of additive manufacturing material, the additive manufacturing material of at least some of the additional layers being magnetically permeable, and melting or sintering the additional layers of additive manufacturing material such that the magnetically-enabled part has a transition region including at least some of the magnetically permeable additive manufacturing material.

Hatch, Jonathan Douglas↗
DOE OSTI2023

Magnetic states of graphene proximitized Kitaev materials

Single-layer α-ruthenium trichloride (α–RuCl 3 ) has been proposed as a potential quantum spin liquid. Graphene/RuCl 3 heterobilayers have been extensively studied with a focus on the large interlayer electron transfer that dopes both materials. Here we examine the interplay between the competing magnetic state of RuCl 3 layer and graphene electronic properties. We perform self-consistent Hartree-Fock calculations on a Hubbard-Kanamori model of the 4d 5 t 2g electrons of α–RuCl 3 and confirm that out-of-plane ferromagnetic and zigzag antiferromagnetic states are energetically competitive. We show that the influence of hybridization between graphene and RuCl 3 bands is strongly sensitive to the magnetic configuration of RuCl 3 and the relative orientations of the two layers. We argue that strong hybridization leads to graphene magnetoresistance and that it may tilt the balance between closely competing magnetic states. Furthermore, Our analysis can be applied to any van der Waals heterobilayer system with weak interlayer hybridization and allows for arbitrary lattice constant mismatch and relative orientation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local spin structure in the layered van der Waals materials MnPS 𝑥 ⁢Se 3−𝑥

Two-dimensional (2D) layered materials, whether in bulk form or reduced to just a single layer, have potential applications in spintronics and capacity for advanced quantum phenomena. A prerequisite for harnessing these opportunities lies in gaining a comprehensive understanding of the spin behavior in 2D materials. The low dimensionality motivates an understanding of the spin correlations over a wide length scale, from local to long-range order. In this context, we focus on the magnetism in bulk MnPSe 3 and MnPS 3 , 2D layered van der Waals antiferromagnetic semiconductors. These materials have similar honeycomb Mn layers and magnetic ordering temperatures, but distinct spin orientations and exchange interactions. Here, we utilize neutron scattering to gain deeper insights into the local magnetic structures and spin correlations in the paramagnetic and ordered phases by systematically investigating a MnPS 𝑥 ⁢Se 3−𝑥 (𝑥 = 0, 1, 1.5, 2, 3) series of powder samples using total neutron scattering measurements. By employing magnetic pair distribution function analysis, we unraveled the short-range magnetic correlations in these materials and explored how the nonmagnetic anion S/Se mixing impacts the magnetic correlations. The results reveal that the magnetism can be gradually tuned through alteration of the nonmagnetic S/Se content, which tunes the atomic structure. The change in magnetic structure is also accompanied by a control of the magnetic correlation length within the 2D honeycomb layers. Complimentary inelastic neutron scattering measurements allowed a quantification of the change in the magnetic exchange interactions for the series and further highlighted the gradual evolution of spin interactions in the series MnPS 𝑥 ⁢Se 3−𝑥 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗