Experiments on magnetoplasmadynamic engines with rotating current distributions
Langmuir measurements of rotating electric current distribution between electrodes of plasma engine
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Langmuir measurements of rotating electric current distribution between electrodes of plasma engine
Luminous tenuous collimated electron beam from plume of MPD arc in fiberglass vacuum tank, examining beam trajectory in geomagnetic fields
Background pressure and magnetic field shape effect on MPD thrustor performance, testing radiation cooled thrustors
Multimegawatt quasi-steady MPD arc accelerator in millisecond pulses, noting applicability to experiments requiring long exposure times
Quasi-steady MPD arc thrustor average thrust measurements, considering time-of-flight velocity determination by ion collecting probes
Flucturations in electron density and temperature coupled through OHM's Law are studied for MHD power generator and MPD arc thruster applications. The dispersion relation based on linear theory is derived, and the two limiting cases of infinite ionization rate and frozen flow are examined. The nonlinear effects of the frozen flow case are then studied in the quasilinear limit. Equations are derived for the amplitude of the fluctuation and its effect upon Ohm's Law and the electron temperature equation. Conditions under which a steady state can exist in the presence of the fluctuation are examined, and effective transport properties are determined.
Measurements of terminal voltage, exhaust velocity, current and potential distributions in a quasi-steady MPD arc operating over a range of currents from 3 to 25 kA countervene previous indications of basic limitations on MPD performance. Terminal voltage fluctuations, previously used as an indicator of a unique limiting value of the parameter current squared over mass flow, are shown to be related to cathode surface area rather than to interelectrode plasma phenomena. With improved electrodes and insulators, satisfactory arc operation at specific impulses somewhat beyond previously proposed limits has been demonstrated, and the significant thrust producing mechanisms in such arcs have been identified.
The plasmadynamic recombination laser concept is verified experimentally in a high power quasi-steady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764 and 4727 A, is observed spectro-photographically and photoelectrically over the entire 1-msec discharge.
The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s ArII transitions are established by collisional-radiative recombination of the ArIII ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764, and 4727 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.
Anode heat flux in a quasi-steady MPD accelerator has been measured directly and locally by thermocouples attached to the inside surface of a shell anode. These measurements show that over a range of arc current from 5.5 to 44 kA, and argon mass flow from 1 to 48 g/s, the fraction of the total arc power deposited in the anode decreases from 50% at 200 kW to 10% at 20 MW. A theoretical model of the anode heat transfer asserts that energy exchange between electrons and heavy particles in the plasma near the anode occurs over distances greater than the anode sheath thickness, and hence the usual anode fall voltage, electron temperature, and work function contributions to the anode heat flux are supplemented by a contribution from the interelectrode potential. Calculations of anode heat flux using the measured current density, plasma potential, and electron temperature in the plasma adjacent to the anode agree with the direct measurements and indicate that the decrease in anode power fraction at higher arc powers can be attributed to the smaller mean free paths in the interelectrode plasma.
The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of seven such transitions, 5145, 4880, 4764, 4727, 4658, 4579, and 4545 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.
Current research on self-field MPD thrusters presents the possibility of developing high power/low cost electric propulsion. The interest generated in this propulsion concept within both NASA and the U.S. Air Force has led to a coordinated interagency effort, and the recent completion of several test sites are expected to speed thruster concept development. Efficiencies approaching 40% at 2200 sec have been experimentally demonstrated. Among the characteristics recommending development of MPD thrusters are high thrust density and power handling capability, simplicity, and a wide dynamic range of thrust and specific impulse. MPD thrusters can, moreover, operate either continuously, at high available power levels, or in a pulsed mode, to match lower power levels.
Explore the source record for details and available documents.
A flared-anode MPD thruster has been modified to permit injection of propellant through the backplate near the anode wall. At 6 g/sec argon, this thruster displays an onset current of 41.4 kA, almost double the value observed for propellant injection at the cathode and intermediate radial positions. A magnetic field survey of the interelectrode region shows current density is highest at the upstream and downstream ends of the chamber. The operating efficiency at onset current inferred from magnetic field data exceeds 50 percent, but swinging-gate thrust stand measurements reveal a progressive divergence between inferred and actual thrust with increasing power. Near onset, the measured thrust is approximately 20 percent lower than that inferred from magnetic probing. Explanations for this behavior have been explored with viscous drag emerging as the most probable cause of performance degradation.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
There are potential space exploration missions which may significantly benefit from the use of electric propulsion at power levels of hundreds of kilowatts. The applied magnetic field MPD thruster is potentially capable of efficient, high specific impulse operation in this power range. This paper describes current experimental and analytical efforts to further the development of such a thruster and presents the latest results. In particular, efforts to measure, simultaneously, the thrust developed by the archead and by the electromagnet, and to evaluate the effect of a diffuser on vacuum tank back pressure, are presented and discussed. It was found that with ammonia vapor as propellant, the vacuum tank pressure was reduced from 8 to 4.9 Pa at a power level of 80 kW. This pressure decrease is expected to become greater as the power and applied field are increased. Also, the development of a cathode/plasma interaction model for determining the heat loads to the cathode as functions of the various free stream plasma parameters is presented. This model is combined with a cathode thermal model in order to provide a complete and integrated picture of MPD thruster cathode operation. Several computational examples are used to illustrate the combined model.
Explore the source record for details and available documents.