A comparison of high voltage outgassing of LiCoO2, LiNiO2, and Li2MnO3 layered Li-ion cathode materials
Not Available
Papp, Joseph K. (ORCID:0000000279826096)↗
SEARCH · Search NASA
Results for “materials outgassing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Predicting 3D moisture sorption behavior of materials from 1D investigations
Abstract Moisture in materials can be a source of future outgassing and exacerbate unwanted changes in physical and chemical properties. Here, we investigate the effect of sample size and shape on the moisture transport phenomena through a combined experimental and modeling approach. Several different materials varying in size and shape were investigated over a wide range of relative humidities (0–90%) and temperatures ( $$30{-}70^{\,\circ } \hbox {C}$$ 30 - 70 ∘ C ) using gravimetric type dynamic vapor sorption (DVS). A dynamic triple-mode sorption model, developed previously, was employed to describe the experimental results with good success; the model includes absorption, adsorption, pooling (clustering) of species, and molecular diffusion. Here we show that the full triple-mode sorption model is robust enough to predict the dynamic uptake and outgassing of 3-dimensional (3D) samples using parameters derived from quasi-1D samples. This successful demonstration on three different materials (filled polydimethylsiloxane (PDMS), unfilled PDMS, and ceramic inorganic composite) illustrates that the model is robust at describing the scale-independent physics and chemistry of moisture sorption and diffusion materials. This work demonstrates that while sorption mechanisms manifest in testing of all sample sizes, some of these mechanisms were so subtle that they were overlooked in our initial modeling and assessment, illustrating the importance of multi-scale experiments in the development of robust predictive capabilities. Our study also outlines the challenges and viable solutions for global optimization of a multi-parameter model. The ability to quantify moisture sorption and diffusion, independent of scale, using 1D lab-scale experiments enables prediction of long-term bulk materials behavior in real applications.
36 MATERIALS SCIENCE↗
Outgassing measurements of bare and magnetite-coated low-carbon steel vacuum chambers
The outgassing properties of bare and magnetite-coated AISI 1020 low-carbon steel vacuum chambers were evaluated to establish material selection criteria for extreme high vacuum applications, namely, to explore the possibility of using these materials to build next-generation spin-polarized photoelectron guns. Water outgassing measurements using the throughput method revealed that the magnetite-coated chamber exhibited five times lower outgassing at room temperature prior to baking, but this advantage disappears after 80 °C baking. Hydrogen outgassing measurements demonstrated significant differences after intensive heat treatment: the bare low-carbon steel vacuum chamber achieved a specific outgassing rate of 9.6 × 10 −16 Torr L s −1 cm −2 after 400 °C/50 h bake plus additional heat treatment at lower temperatures, 25 times lower than the magnetite-coated low-carbon steel chamber. Residual gas analysis showed >99% hydrogen composition after heat treatment for both materials, with carbon species below detection limits for bare low-carbon steel versus 0.8% for magnetite-coated surfaces. These measurements indicate that properly conditioned bare low-carbon steel can achieve the <10 −12 Torr pressures required for next-generation spin-polarized photogun applications. In conclusion, the paper includes various analysis techniques intended to explain observed behaviors: isotherm analysis of pump-down plots, Arrhenius analysis of hydrogen outgassing rate data, and residual gas composition tracking.
Adsorption isotherm↗
Computer simulation of carbonization and graphitization of coal
Abstract This study describes computer simulations of carbonization and graphite formation, including the effects of hydrogen, nitrogen, oxygen, and sulfur. We introduce a novel technique to simulate carbonization, ‘Simulation of Thermal Emission of Atoms and Molecules (STEAM)’, designed to elucidate volatile outgassing and density variations in the intermediate material during carbonization. The investigation analyzes the functional groups that endure through high-temperature carbonization and examines the graphitization processes in carbon-rich materials containing non-carbon impurity elements. The physical, vibrational, and electronic attributes of impure amorphous graphite are analyzed, and the impact of nitrogen on electronic conduction is investigated.
Ugwumadu, C. (ORCID:0000000199207594)↗
General H2O Outgassing Model Applicable to Silica-Filled Silicones
Moisture-induced agining and degradation are continuing concerns in long-term storage and use of silicone materials. The silica fillers frequently used to provide mechanical reinforcement in silicone formulations have a high affinity for H2O and act as a source of moisture outgassing later when placed in dry or vacuum applications.
36 MATERIALS SCIENCE↗
Ultra-High Vacuum Outgassing Characterization of Thermally Processed Low-Carbon Steel for Advanced Particle Accelerator and Gravitational Wave Detector Applications
This dissertation investigated AISI 1020 low-carbon steel as an alternative vacuum chamber material to conventional stainless steel for ultra-high vacuum (UHV) and extreme-high vacuum (XHV) applications. After a 400 °C/48 h bake, AISI 1020 tube chambers achieved a hydrogen outgassing rate of 2.4 × 10¿¹6 Torr·L·s¿¹·cm¿², approximately 2,300 times lower than the prebaked 316L stainless-steel comparator, among the lowest hydrogen outgassing rates ever reported for an uncoated metallic vacuum chamber. Bare and magnetite-coated AISI 1020 chambers were then compared using throughput and rate-of-rise methods. The magnetite coating yielded 5× lower water outgassing at room temperature, but this advantage disappeared after 80 °C baking. After full thermal conditioning (400 °C/48 h prebake followed by 150 °C/96 h and 200 °C/110 h), bare steel achieved 25× lower hydrogen outgassing than the magnetite-coated chamber (9.6 × 10¿¹6 Torr·L·s¿¹·cm¿²) and >99% H2 purity with carbon species below RGA detection. Monte Carlo molecular flow simulations of a CEBAF photogun beamline (96 scenarios) showed that replacing 304L stainless steel with AISI 1020 reduces equilibrium H2 pressure by a factor of 833; a single 304L electrode contributes 98.8% of the gas load despite occupying only 9.1% of the internal surface area. A 500-m Einstein Telescope beampipe screening showed that corrugated bellows contribute 18% of the gas load from only 0.7% of the surface area. A five-model adsorption isotherm framework applied to 22 pumpdown datasets (164 fits with AR(1)-GLS correction) established that the experimental protocol, not the material, controls isotherm identifiability: Dubinin–Radushkevich wins isothermal pipe pumpdowns; Langmuir wins thermally dominated chamber bakes. Cross-dataset joint fitting of the AISI 1020 pipe pumpdowns yielded an H2 diffusion activation energy Ed = 7.24 ± 1.28 kcal·mol¿¹, consistent with trap dominated diffusion in commercial low-carbon steels. Two companion innovations were developed: a Variable Conductance Device (VCD, patent pending IDF-00723) for XHV outgassing measurement, and VacuumDesignerPro (VDP), a MATLAB-based design tool validated against LIGO benchmarks.
Al-Allaq, Aiman H [Old Dominion University]↗
Polyurethane Packaging Foam Physical Properties and Outgassing Analysis
Previous polyurethane formulation used for producing packaging foam will no longer be used given environmental concerns associated with the use of a blowing agent. Green foam outgassing quantities have been successfully determined.
36 MATERIALS SCIENCE↗
Thermal Stability and Outgassing Behaviors of High‐nickel Cathodes in Lithium‐ion Batteries
Abstract LiNiO 2 ‐based high‐nickel layered oxide cathodes are regarded as promising cathode materials for high‐energy‐density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high‐Ni cathodes, which are critical factors in determining their overall safety performance. A comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high‐Ni cathodes.
Cui, Zehao↗
Thermal Stability and Outgassing Behaviors of High–nickel Cathodes in Lithium–ion Batteries
LiNiO 2 -based high-nickel layered oxide cathodes are regarded as promising cathode materials for high-energy-density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high-Ni cathodes, which are critical factors in determining their overall safety performance. Furthermore, a comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high-Ni cathodes.
25 ENERGY STORAGE↗
Outgassing behavior and heat treatment optimization of JSC-1A lunar regolith simulant
As NASA strives towards a long duration presence on the Moon, it has become increasingly important to learn how to better utilize resources from the lunar surface for everything from habitats, vehicle infrastructure, and chemical extraction. To that end, a variety of lunar simulants have been sourced from terrestrially available volcanic minerals and glass as Apollo regolith is unavailable for experimentation needing large masses. However, while mineralogy and chemical composition can approach that of lunar material in these simulants, there are still distinct non-lunar phases such as hydrates, carbonates, sulfates, and clays that can cause simulants to behave distinctly non-lunar in a variety of processing conditions that maybe applied in-situ to lunar material. Notably, severe glassy bubbling has been documented in a variety of vacuum sintering experiments on JSC-1A lunar mare simulant heated via microwaves. The origins of this outgassing have not been well understood but are normally attributed to the decomposition of non-lunar contaminates intrinsic to virtually all terrestrially sourced simulants. As such, a series of controlled environmental tests were performed to ascertain the origins of the high temperature outgassing and to develop heat treatments that can drive JSC-1A closer to lunar composition and behavior. It was found that in JSC-1A at elevated temperatures distinct gas evolutions of water, carbon dioxide, and sulfur dioxide occur in both inert gas and vacuum. Additionally, the presence of hydrogen during heat treatments was shown to dramatically change gas evolutions, leading to distinctly more lunar-like composition and behavior from JSC-1A simulant.
58 GEOSCIENCES↗
A theoretical/computational framework to measure SiO2 and MgO viscosity at high pressure
The convection of the mantle of Earth and super-Earths is important for many terrestrial phenomena, from plate tectonics to outgassing. Rheological properties, such as viscosity, regulate the transport of thermal energy and mass. However, the viscosity of mantle-relevant materials, such as MgO, at relevant pressures (>120 GPa) are not well constrained. The objective of this work was to develop a computational platform to simulate novel experiments aiming to measure the viscosity of MgO at high pressures. Experiments performed by our collaborators at Johns Hopkins University and Lawrence Livermore National Laboratory use the OMEGA EP laser facility to shock a corrugated MgO interface to 170 GPa, with resulting velocity evolution governed by the viscous Richtmyer-Meshkov instability. We used an in-house hydrocode to simulate this process and thus provide a bound on viscosity by comparing our simulations results to these experiments, as well as to examine the physical processes at play. We simulated the experiments with different values of MgO viscosity (from inviscid to 10,000 Pa∙s) while taking into account the unsteady laser pulse, the material's equation of state, and the rate-dependent constitutive relation for MgO, and the materials' equations of state. Our results suggest that MgO at these conditions has a viscosity within an order of magnitude of 5000 Pa∙s.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Renewable low-Z wall for fusion reactors with built-in tritium recovery (Final Technical Report)
This project pursued development of a novel renewable plasma-facing wall technology for fusion reactors. The technology is based on a slurry which can be easily delivered by delivery tubes to the reactor wall. The slurry dries at the hot reactor wall into pebble rods which are extruded out into the hot plasma, where the pebbles break off and fall along the reactor wall and can be recovered by gravity and re-used. The falling pebbles carry away heat and tritium and also protect the wall against large scale erosion or redeposition of material. The research focused on carbon-based pebble rods and demonstrated that pebble rods could be produced from slurry with tolerable levels of outgassing on a reactor-relevant timescale (< 5 minutes). Steady-state handling of reactor relevant (up to 50 MW/m 2 ) normal-incidence heat loads was demonstrated. Pebble release velocities were found to be sufficiently small (< 1 m/s) to allow recovery below the vacuum chamber. Tunability of the pebble rod breaking rate was demonstrated by changing the fill fraction of the interpebble matrix which binds the pebbles together. This work could benefit the public by helping move forward the design of commercially viable fusion energy reactors. Designing a first wall for magnetic fusion reactors which can handle the huge heat loads present and also avoid buildup of tritium-containing deposits is extremely challenging and requires novel approaches like the one being investigated here.
36 MATERIALS SCIENCE↗
Toluene Uptake and Outgassing by a 3D-Printed Silicone and the Impact on Mechanical Performance
Silicone elastomers have advantageous physical properties and are widely used in various applications. Additive manufacturing (AM) of silicones provides additional utility by enabling tunable mechanical and functional properties. However, the performance of these elastomers deteriorates over time with exposure to environmental stressors. Organic solvents and volatile organic compounds (VOCs) are stressors that can cause dimensional changes to silicones with exposure and impact the overall function. Yet, the effects of such exposure on mechanical performance, including load response (LR), are not well understood. Here, in this study, we investigated the impact of a nonpolar solvent, toluene, on AM silicone material properties and compressive load. We observed that AM silicones rapidly absorbed toluene and swelled, leading to an increase in relative LR. Toluene concentration and compression did not affect uptake or swelling rates. In contrast, outgassing rates were slower for compressed coupons compared to uncompressed specimens, attributed to geometric constraints and polymer network changes impacting toluene diffusion outward. Compression also pinned the AM silicones at an enlarged state, significantly reducing relative LR after outgassing. Depending on toluene concentrations and compression, AM silicones can remain robust against toluene exposure and recover their initial printing geometry and mechanical performance after toluene outgassing and polymer relaxation.
Materials science↗
Deuterium retention characteristics during lithium powder and granule injection in EAST
Fuel retention remains a critical challenge for magnetic confinement fusion devices. As a low-Z material, lithium plays a key role in tokamak wall conditioning and impurity control. In this study, the fuel retention behaviors associated with two lithium forms—powder and granule—are systematically examined using the gas balance method. Both forms of lithium injection significantly enhance fuel retention, shifting the wall behavior from net outgassing to net absorption. For lithium powder injection, compared with the reference discharge, a suppression efficiency exceeding 40% is achieved relative to the number of injected lithium atoms. Moreover, discharges with different injection rates show a monotonic increase in retained fuel with the injected lithium quantity. In contrast, repeated granule injections exhibit a pronounced cumulative effect, with the retention ratio varying from 0.16 to 0.65 over successive discharges, indicating progressive enhancement of wall absorption and deuterium retention. These results advance the understanding of wall behavior modification induced by solid material injection and provide insights for developing effective wall-conditioning strategies using low-Z materials in ITER and future fusion reactors, while the expected high retention may ultimately exclude the use of Li wall conditioning in future fusion devices.
Fuel retention↗
Initial study on thermal stability of cold spray tantalum coating irradiated with deuterium for fusion applications
Abstract Removal of neutral hydrogen atoms in the plasma edge reduces the number of charge exchange events and thus, the net energy losses in the plasma, significantly improving performance of fusion devices. Effective control of the residual pressure of hydrogen isotopes (HIs) in the plasma edge may be achieved by utilizing a hydrogen absorbing first wall interface capable of withstanding the harsh fusion environment. In this study, we have investigated tantalum (Ta) coating deposited by cold spray technology on 316L stainless steel substrate as a potential plasma-facing material surface. High fluence low energy deuterium plasma irradiation experiments and subsequent thermal annealing cycles associated with thermal desorption spectrometry (TDS) demonstrated superior structural stability of the Ta coating. TDS experiments revealed the outgassing of deuterium (as measure of its retention) for cold spray Ta coatings to be three times higher than bulk Ta and two orders of magnitude greater than bulk polycrystalline W. X-ray photoelectron spectroscopy revealed evolution of oxidation states upon deuterium irradiation and a partial recovery of the metallic signature of Ta after the thermal treatment at 1100 K.
Physics↗
Develop low-temperature diffusional moisture outgassing model for silica-filled silicones
A universal outgassing model for all silica-filled silicones would allow researchers to make moisture outgassing predictions for many different silica-filled silicones using the same sets of kinetic parameters (but with different intensities for the outgassing constituents). In FY 2020, we succeeded in developing such a model for outgassing in a vacuum/dry environment after ~ 1-2 hours of room temperature vacuum pump. That means the FY2020 model does not account for the low temperature diffusional moisture outgassing during the first few hours under vacuum pump. In FY 2021, we have used the experimental technique of dynamic vapor sorption together with the modified Page diffusion model to measure and quantify the low temperature (i. e. room temperature) diffusional moisture release to complete our universal moisture outgassing model for silica-filled silicones from low temperatures to high temperatures.
36 MATERIALS SCIENCE↗
Outgassing of implanted He via short circuit transport along phase and grain boundaries in vapor co-deposited Cu-W nanocomposites
We investigate the response of physical vapor co-deposited copper (Cu)-tungsten (W) nanocomposites to helium (He) implantation. Nuclear reaction analysis (NRA) reveals that a substantial fraction of He implanted into these materials escapes during implantation. Analysis of nanocomposite microstructure shows that the He loss is likely due to its transport out of the material by diffusion along phase and grain boundaries. Lastly, our findings suggest that solid-state interfaces such as phase and grain boundaries are short circuit diffusion pathways for transport of He.
36 MATERIALS SCIENCE↗
Time-dependent modeling of coupled plasma-wall dynamics
Effects of dynamic wall outgassing on divertor plasma during an ELM-like heat pulse are modelled using newly coupled edge plasma code UEDGE and all reaction-diffusion code FACE. Different divertor regimes are simulated depending on the degree of the plasma detachment. It is shown that hydrogen outgassing from the divertor target plate induced by ELM pulse in the semi-detached regime can trigger deep plasma detachment. The induced detachment does not spontaneously reverse after the pulse due to ineffective implantation of low energy plasma hydrogen in the target material. Furthermore, we demonstrate that plasma neutrals play essential role in heat transport in a detached divertor. The modelled hydrogen dynamics in the wall material demonstrates that the heat pulse leads to enhanced hydrogen transport toward the wall bulk.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗