Search NASA⌕ Search

SEARCH · Search NASA

Results for “matric potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Simulated tree recruitment at PA-BCI under four precipitation scenarios

Simulated recruitment rates are provided for four tropical tree plant functional types (PFTs) which vary in drought and shade tolerance, at Barro Colorado Island, Panama (PA-BCI). Recruitment rates are predicted using the Tree Recruitment Scheme (TRS; Hanbury-Brown et al., 2022) and model data output from the Ecosystem Demography model version 2 with hydrodynamics (ED2; Medvigy et al., 2009, Powell et al., 2018). Predictions of recruitment are provided under four precipitation scenarios: “BASE” = recycled 2008-2014 observed meteorology (Faybishenko & Paton, 2021), “SYN-ENSO” = two exceptionally strong El Niño events within 30 years (Powell et al., 2018), “WET” = 30% increase in precipitation compared to BASE, and DRY-DS = dry season (January–April) precipitation reduced by 75% compared to BASE. In addition to recruitment rates, this dataset provides TRS predictions of PFT-specific seed bank and seedling pool dynamics (tracked in units of carbon) and ED predictions of understory photosynthetically active radiation and soil matric potential at 6 cm soil depth.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Physical and Hydraulic Properties of RCRA Borehole Samples from the Hanford Site : Final Report, Fiscal Years 2023-2024

Sediment from 44 core samples collected from Resource Conservation and Recovery Act (RCRA) boreholes drilled in the 200 East and 200 West areas of the Hanford Site were characterized for physical and hydraulic properties (Table S.1). Characterization data included gravimetric water contents and matric potentials, grain-size distributions, saturated hydraulic conductivity, water retention characteristics, and unsaturated hydraulic conductivity. These properties provide site-specific data and parameters that can be used in subsurface flow and contaminant transport models to assess the transport and fate of contaminants in the vadose zone and underlying aquifer systems. The analyzed core samples come from specific areas and depth intervals at the Hanford Site that were targeted for sampling to address data gaps identified by site contractors (Khaleel 2020). X-ray computed tomography (XCT) was used to evaluate the general textural characteristics of the samples and to determine which samples to use for further physical and hydraulic property characterization. Subsequent sample selection was determined by consensus after review of the XCT images by Pacific Northwest National Laboratory, Central Plateau Cleanup Company, and INTERA staff.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Root system architecture and environmental flux analysis in mature crops using 3D root mesocosms

Current methods of root sampling typically only obtain small or incomplete sections of root systems and do not capture their true complexity. To facilitate the visualization and analysis of full-sized plant root systems in 3-dimensions, we developed customized mesocosm growth containers. While highly scalable, the design presented here uses an internal volume of 45 ft 3 (1.27 m 3 ), suitable for large crop and bioenergy grass root systems to grow largely unconstrained. Furthermore, they allow for the excavation and preservation of 3-dimensional root system architecture (RSA), and facilitate the collection of time-resolved subterranean environmental data. Sensor arrays monitoring matric potential, temperature and CO 2 levels are buried in a grid formation at various depths to assess environmental fluxes at regular intervals. Methods of 3D data visualization of fluxes were developed to allow for comparison with root system architectural traits. Following harvest, the recovered root system can be digitally reconstructed in 3D through photogrammetry, which is an inexpensive method requiring only an appropriate studio space and a digital camera. We developed a pipeline to extract features from the 3D point clouds, or from derived skeletons that include point cloud voxel number as a proxy for biomass, total root system length, volume, depth, convex hull volume and solidity as a function of depth. Ground-truthing these features with biomass measurements from manually dissected root systems showed a high correlation. We evaluated switchgrass, maize, and sorghum root systems to highlight the capability for species wide comparisons. We focused on two switchgrass ecotypes, upland (VS16) and lowland (WBC3), in identical environments to demonstrate widely different root system architectures that may be indicative of core differences in their rhizoeconomic foraging strategies. Finally, we imposed a strong physiological water stress and manipulated the growth medium to demonstrate whole root system plasticity in response to environmental stimuli. Hence, these new “3D Root Mesocosms” and accompanying computational analysis provides a new paradigm for study of mature crop systems and the environmental fluxes that shape them.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Modeling Geologic Waste Repository Systems Below Residual Saturation

The heat generated by high-level radioactive waste can pose numerical and physical challenges to subsurface flow and transport simulators if the liquid water content in a region near the waste package approaches residual saturation due to evaporation. Here, residual saturation is the fraction of the pore space occupied by liquid water when the hydraulic connectivity through a porous medium is lost, preventing the flow of liquid water. While conventional capillary pressure models represent residual saturation using asymptotically large values of capillary pressure, here, residual saturation is effectively modeled as a tortuosity effect alone. Treating the residual fluid as primarily dead-end pores and adsorbed films, relative permeability is independent of capillary pressure below residual saturation. To test this approach, PFLOTRAN is then used to simulate thermal-hydrological conditions resulting from direct disposal of a dual-purpose canister in unsaturated alluvium using both conventional asymptotic and revised, smooth models. Importantly, while the two models have comparable results over 100 000 years, the number of flow steps required is reduced by approximately 94%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

PotLib 2023: New version of a potential energy surface library for chemical systems

POTLIB is a library of global and semiglobal potential energy surface subprograms. The library currently features 410 entries, including both single-state entries and multi-state entries. When one calls the routine of a single-state entry, it returns the ground-electronic-state adiabatic potential energy surface at the input geometry. In addition, some entries also return the gradient of the surface. Further, when one calls a multi-state entry, it returns a diabatic potential energy matrix (DPEM). If the entry also has the gradient of the DPEM, one can compute adiabatic surfaces, their gradients, and the nonadiabatic coupling vectors (NACs) from the DPEM and its gradient by diagonalization. Some but not all the routines conform to one of a set of standard interfaces. The goal is to facilitate chemical dynamics research by collecting and disseminating a comprehensive collection of state-of-the-art potential energy routines (developed by a wide, international group of researchers) with systematic and well-defined interfaces for use with chemical dynamics programs. Systems in the library include CHArO 2 , CHN 2 O + , CH 2 O, CH 2 O 2 , CH 3 N 2 , CH 3 O, CH 4 , CH 4 Br, CH 4 Cl, CH 4 F, CH 4 O, CH 4 OCl, CH 4 OF, CH 4 OH, CH 5 , CH$^{+}_{5}$, CH 5 N, CH 5 O 2 , CH 8 O 2 , C 2 H 2 N 2 O, C 2 H 2 O, C 2 H 4 N, C 2 H 4 O 4 , C 2 H 6 Cl, C 2 H 6 F, C 2 H 6 H, C 2 H 6 O, C 2 H 6 OH, C 2 H 7 , C 2 O 2 , C 3 H 4 O 2 , C 3 H 7 NO, C 6 H 6 O, C 6 H 6 S, C 7 H8S, HBrCl, HCl 2 , HF 2 , HI 2 , HLiF, HNaF, HO 2 , HO 3 , HOBr, HSiO, H 2 Br, H 2 ClO, H 2 F, H 2 F 2 , H 2 FO, H 2 Na, H 2 O, H 2 O 2 , H 2 OBr, H 3 , H 3 Cl, H 3 ClN, H 3 ClO, H 3 N, H 3 O, H 3 O 2 , H$^{+}_{3}$, H 3 S, H 4 ClSi, H 4 N, H 4 NO, H 4 O 2 , H 5 GeO, H 5 Si, H$^{+}_{7}$, Al m H n , Al n , Ar N O, K 2 Rb 2 , NO 2 , N 2 O, N 2 O 2 , N 3 , N 4 , O 3 , and O 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Functional Nanomaterials with Tunable Plasmonic and Emittive Properties (Final Project Report)

The goal of the project is on understanding the principles of non-covalent assembling of tunable functional materials with various nanocrystals in order to control light-matter interactions by changing localized interfacial refractive properties, coupling parameters, or the ionic environment of surrounding media. We explore novel soft functional matrices with controlled physical properties via the application of light, mechanical stresses, ionic environment, and electrical potential. These functional matrices is used in conjunction with novel anisotropic inorganic nanostructures such as noble metal/metal alloy anisotropic nanostructures with complex optical properties (multiple LSPR modes) and quantum dots with light-emissive or absorbing properties in a broad spectral range from the UV to the NIR for efficient solar energy absorption and light conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Computationally Efficient Decompositions of Oblique Projection Matrices

Oblique projection matrices arise in problems in weighted least squares, signal processing, and optimization. While these matrices can be potentially very large, their low-rank structure can be exploited for efficient computation. Here, we propose fast and scalable algorithms for computing their eigendecomposition and singular value decomposition (SVD). Numerical experiments that compare our proposed approaches to existing methods, including randomized SVD, are presented. In addition, we test their accuracy on linear systems from equality constrained optimization problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Quantum Many-Body Theory from a Solution of the N -Representability Problem

Here, in this study, we present a many-body theory based on a solution of the N-representability problem in which the ground-state two-particle reduced density matrix (2-RDM) is determined directly without the many-particle wave function. We derive an equation that re-expresses physical constraints on higher-order RDMs to generate direct constraints on the 2-RDM, which are required for its derivation from an N-particle density matrix, known as N-representability conditions. The approach produces a complete hierarchy of 2-RDM constraints that do not depend explicitly upon the higher RDMs or the wave function. By using the two-particle part of a unitary decomposition of higher order constraint matrices, we can solve the energy minimization by semidefinite programming in a form where the low-rank structure of these matrices can be potentially exploited. We illustrate by computing the ground-state electronic energy and properties of the H 8 ring.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

GSoFa: Scalable Sparse Symbolic LU Factorization on GPUs

Decomposing a matrix $\mathbf {A}$ into a lower matrix $\mathbf {L}$ and an upper matrix $\mathbf {U}$, which is also known as LU decomposition, is an essential operation in numerical linear algebra. For a sparse matrix, LU decomposition often introduces more nonzero entries in the $\mathbf {L}$ and $\mathbf {U}$ factors than in the original matrix. A symbolic factorization step is needed to identify the nonzero structures of $\mathbf {L}$ and $\mathbf {U}$ matrices. Attracted by the enormous potentials of the Graphics Processing Units (GPUs), an array of efforts have surged to deploy various LU factorization steps except for the symbolic factorization, to the best of our knowledge, on GPUs. This article introduces gSoFa, the first GPU-based symbolic factorization design with the following three optimizations to enable scalable LU symbolic factorization for nonsymmetric pattern sparse matrices on GPUs. First, here we introduce a novel fine-grained parallel symbolic factorization algorithm that is well suited for the Single Instruction Multiple Thread (SIMT) architecture of GPUs. Second, we tailor supernode detection into a SIMT friendly process and strive to balance the workload, minimize the communication and saturate the GPU computing resources during supernode detection. Third, we introduce a three-pronged optimization to reduce the excessive space consumption problem faced by multi-source concurrent symbolic factorization. Taken together, gSoFa achieves up to 31× speedup from 1 to 44 Summit nodes (6 to 264 GPUs) and outperforms the state-of-the-art CPU project, on average, by 5×. Notably, gSoFa also achieves up to 47 percent of the peak memory throughput of a V100 GPU in the Summit Supercomputer.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Isotope Exchange between Mercuric [Hg(II)] Chloride and Hg(II) Bound to Minerals and Thiolate Ligands: Implications for Enriched Isotope Tracer Studies

Enriched mercury (Hg) stable isotopes have been widely used as tracers in field and laboratory investigations of Hg(II) biogeochemical transformations such as methylation and demethylation. Few studies, however, have considered concurrent isotope exchange reactions between newly spiked and pre-existing Hg(II) in environmental matrices, which may alter redistribution and thus transformation of the spiked and pre-existing Hg(II). Using enriched 198 Hg [as mercuric Hg(II) or HgCl n species], this study investigated isotope exchange between 198 Hg and pre-existing Hg(II) bound to metacinnabar (β-HgS), sediments, low-molecular-weight (LMW) thiols, and dissolved organic matter (DOM). The impact of isotope exchange on methylmercury production in the presence of organic ligands was also evaluated with an iron-reducing bacterium Geobacter sulfurreducens PCA in a phosphate buffered solution (pH 7.4). Here, we found that spiked 198 Hg readily exchanged with mineral-bound ambient Hg(II) despite concurrent Hg(II) adsorption and immobilization on the solids. Rapid exchange (<3 min) was also observed between spiked 198 Hg and 200 Hg pre-equilibrated with LMW thiols and DOM in solution. While the exchange did not cause net changes in Hg(II) chemical speciation, it resulted in redistribution of Hg(II) isotopes bound to the ligands and thus an apparently similar methylation rate and magnitude of the spiked 198 Hg and pre-existing 200 Hg by PCA cells when 198 Hg and 200 Hg were added at 1:1 ratio. These observations underscore the importance of isotope exchange when an enriched Hg isotope is applied in environmental matrices, as the exchange could potentially lead to biased rate calculations of Hg(II) transformation and bioaccumulation and thus risk assessments of new Hg(II) input to the natural ecosystems.

58 GEOSCIENCES↗
DOE OSTI2023

A data analysis method to rapidly characterize gallium concentration in plutonium matrices using LIBS

The processing of actinide samples is a complex and costly endeavor that requires compositional analysis at various stages. Laser-induced breakdown spectroscopy (LIBS) has been used to analyze actinide-containing samples in many nuclear applications including waste management, fuel processing and forensics. The LIBS spectrum obtained from actinide materials are generally extremely complex, exhibiting many thousands of strong emission lines. This makes it difficult to identify other elements within the sample of interest, given the rich and dominant actinide spectrum. Here, in this article, we describe a recent effort to identify and quantify impurities and alloying constituents in plutonium matrices using a hand-held LIBS instrument that is used to rapidly and efficiently measure an emission spectrum from a material sample. We tabulate the emission line positions and intensities of plutonium. We report the development of machine-learning software that can identify gallium and quantify its concentration in plutonium matrices. This work has the potential to provide a rapid and nearly non-destructive technique that allows more confidence in characterizing the composition of materials that are present within complex actinide associated targets. We describe how our LIBS measurements and data analysis methods have successfully quantified the gallium concentration in a variety of samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multiplexed Anodic Stripping Voltammetry Detection of Heavy Metals in Water Using Nanocomposites Modified Screen-Printed Electrodes Integrated With a 3D-Printed Flow Cell

In this study, we present multiplexed anodic stripping voltammetry (ASV) detection of heavy metal ions (HMIs)—As(III), Cd(II), and Pb(II)—using a homemade electrochemical cell consisting of dual working, reference and counter screen-printed electrodes (SPE) on polyimide substrate integrated with a 3D-printed flow cell. Working and counter electrodes were fabricated by the screen-printing of graphite paste while the Ag/AgCl paste was screen-printed as a reference electrode (Ag/AgCl quasi-reference electrode). The working electrodes were modified with (BiO) 2 CO 3 -reduced graphene oxide (rGO)-Nafion [(BiO) 2 CO 3 -rGO-Nafion] and Fe 3 O 4 magnetic nanoparticles (Fe 3 O 4 MNPs) decorated Au nanoparticles (AuNPs)-ionic liquid (IL) (Fe 3 O 4 -Au-IL) nanocomposites separately to enhance HMIs sensing. Electrochemical detection was achieved using square wave ASV technique. The desired structure of the flow electrochemical cell was optimized by the computational fluid dynamic (CFD). Different experimental parameters for stripping analysis of HMIs were optimized including deposition time, deposition potential and flow rate. The linear range of calibration curves with the sensing nanocomposites modified SPE for the three metal ions was from 0–50 μg/L. The limits of detection (S/N = 3) were estimated to be 2.4 μg/L for As(III), 1.2 μg/L for Pb(II) and 0.8 μg/L for Cd(II). Furthermore, the homemade flow anodic stripping sensor platform was used to detect HMIs in simulated river water with a 95–101% recovery, indicating high selectivity and accuracy and great potential for applicability even in complex matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polymer electrolytes based on protic ionic liquids with perfluorinated anions for safe lithium-ion batteries

Here, the quest for safe and high-performance polymer electrolytes in lithium-ion batteries (LIBs) has led researchers to explore protic ionic liquids (PILs) as potential candidates to be entrapped in polymer matrices. In this context, we present an investigation into solid polymeric systems based on poly(methyl methacrylate) (PMMA) as a host for PILs, featuring 1,8-diazabicyclo-[5,4,0]-undec-7-ene (DBU) cation paired with three different anions: bis(trifluoromethanesulfonyl)imide (TFSI – ), trifluoromethanesulfonate (TFO – ), and (trifluoromethanesulfonyl-nonafluorobutylsulfonyl)imide (IM14 – ). Additionally, we explore the lithium-doped IM14-gel-like system to broaden our understanding of these intriguing materials. Through comprehensive thermal analysis, solid-state NMR, and diffusion NMR techniques, we delve into the interactions and structural features of these binary and ternary polymeric systems. Our investigation reveals unique dynamics and ion interactions within the PMMA matrix, shedding light on the potential of these materials for advanced energy storage technologies. Particularly, we highlight the distinctive features of DBUH-IM14 and its specific interaction with the polymeric matrix and the lithium ions, underscoring its significance in advancing safer and more efficient energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2024

Analysis of static Wilson line correlators from lattice QCD at finite temperature with T -matrix approach

The thermodynamic T-matrix approach is used to study Wilson line correlators (WLCs) for a static quark-antiquark pair in the quark-gluon plasma (QGP). Selfconsistent results that incorporate constraints from the QGP equation of state can approximately reproduce WLCs computed in 2+1-flavor lattice-QCD (lQCD), provided the input potential exhibits less screening than in previous studies. Utilizing the updated potential to calculate pertinent heavylight T-matrices we evaluate thermal relaxation rates of heavy quarks in the QGP. We find a more pronounced temperature dependence for low-momentum quarks than in our previous results (with larger screening), which turns into a weaker temperature dependence of the (temperature-scaled) spatial diffusion coefficient, in fair agreement with the most recent lQCD data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Layered complex networks as fluctuation amplifiers

Abstract In complex networked systems theory, an important question is how to evaluate the system robustness to external perturbations. With this task in mind, I investigate the propagation of noise in multi-layer networked systems. I find that, for a two layer network, noise originally injected in one layer can be strongly amplified in the other layer, depending on how well-connected are the complex networks in each layer and on how much the eigenmodes of their Laplacian matrices overlap. These results allow to predict potentially harmful conditions for the system and its sub-networks, where the level of fluctuations is important, and how to avoid them. The analytical results are illustrated numerically on various synthetic networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Extraction of Terpenoids from Pine Needle Biomass Using Dimethyl Ether

Pine needles are an industrial feedstock for extracts used in a variety of applications, but conventional extraction methods often result in a degradation of the terpenoid compounds that naturally occur in loblolly pine ( Pinus taeda ). Separation of these compounds from pine biomass is an energy-intensive operation, typically requiring a significant input of thermal energy. An alternative separation approach with potential energy savings is extraction with a condensable gas, namely, dimethyl ether. Biomass materials are exposed to liquid dimethyl ether under pressure, which mobilizes the organics. The extract is then separated from the insoluble pine matter, and dimethyl ether is volatilized away from the separated organic species. A variety of terpene derivatives were extracted from pine needle biomass using this approach, including monoterpenes, sesquiterpenes, and related oxygenates, which were identified using two-dimensional gas chromatography/mass spectrometry. Additionally, the dimethyl ether-treated needles resemble needles subjected to low-temperature drying, whereas needles treated with a high-temperature drying method appear to have shrunken structures. The results suggest that dimethyl ether extraction has significant potential for separating valuable organics from complex matrices without the application of thermal energy during treatment.

dimethyl ether (DME) extraction↗
DOE OSTI2022

Ultra-low binder content 3D printed calcium phosphate graphene scaffolds as resorbable, osteoinductive matrices that support bone formation in vivo

Bone regenerative engineering could replace autografts; however, no synthetic material fulfills all design criteria. Nanocarbons incorporated into three-dimensional printed (3DP) matrices can improve properties, but incorporation is constrained to low wt%. Further, unmodified nanocarbons have limited osteogenic potential. Functionalization to calcium phosphate graphene (CaPG) imparts osteoinductivity and osteoconductivity, but loading into matrices remained limited. This work presents ultra-high content (90%), 3DP-CaPG matrices. 3DP-CaPG matrices are highly porous (95%), moderately stiff (3 MPa), and mechanically robust. In vitro, they are cytocompatible and induce osteogenic differentiation of human mesenchymal stem cells (hMSCs), indicated by alkaline phosphatase, mineralization, and COL1α1 expression. In vivo, bone regeneration was studied using a transgenic fluorescent-reporter mouse non-union calvarial defect model. 3DP-CaPG stimulates cellular ingrowth, retains donor cells, and induces osteogenic differentiation. Histology shows TRAP staining around struts, suggesting potential osteoclast activity. Apparent resorption of 3DP-CaPG was observed and presented no toxicity. 3DP-CaPG represents an advancement towards a synthetic bone regeneration matrix.

60 APPLIED LIFE SCIENCES↗