Search NASA⌕ Search

SEARCH · Search NASA

Results for “megabar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electronic bonding transitions in oxide glass above two megabar pressures

Inelastic x-ray scattering (IXS) of B 2 O 3 glass up to ∼2.2 Mbar reveals electronic bonding transitions in oxide glasses. B -edge IXS identifies the high-energy feature above ∼1.4 Mbar and a gradual increase in its intensity toward ∼2.2 Mbar, indicating the formation of hypervalent boron via electron polarization to oxygen atoms. The pressure-driven high energy shifts in O -edge IXS indicate pronounced electronic dispersion that increases upon densification of amorphous oxides above ∼2 Mbar. The extent of the energy shifts and enhanced polarization correlate with increasing atomic radius of cation in oxide glass, establishing the role of cation radius in electronic structures of amorphous oxides under compression. The results elucidate the electronic mechanisms behind the structural transformation in low- oxide glasses, where transitions to highly coordinated cations are hindered well above 1 Mbar, providing the origin of incompressibility of low- amorphous oxide under multi-Mbar compression. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1979

Linear ruby scale and one megabar

The accuracy and validity of certain techniques used in studying high-pressure transitions have been investigated. Experiments which place upper limits of about 20 GPa and about 50 GPa on pressures practically attainable using uniaxial supported opposed anvil devices with tungsten carbide pistons and uniaxial opposed flat anvil diamond devices, respectively, are reported. Direct static determinations of the transition pressures of GaP by two different methods are described. The values obtained indicate that the linear ruby scale increasingly overestimates the transition pressure as the pressure rises above 10 GPa. It is further shown that the use of shock-based marker materials, such as silver, as the basis of pressure measurement in X-ray diffraction studies leads to bulk moduli of cubic carbides which are in extreme disagreement with expected values.

Ruoff, A. L.↗
DOE OSTI2024

Imaging the Meissner effect in hydride superconductors using quantum sensors

By directly altering microscopic interactions, pressure provides a powerful tuning knob for the exploration of condensed phases and geophysical phenomena. Here, the megabar regime represents an interesting frontier, in which recent discoveries include high-temperature superconductors, as well as structural and valence phase transitions. However, at such high pressures, many conventional measurement techniques fail. Here we demonstrate the ability to perform local magnetometry inside a diamond anvil cell with sub-micron spatial resolution at megabar pressures. Our approach uses a shallow layer of nitrogen-vacancy colour centres implanted directly within the anvil; crucially, we choose a crystal cut compatible with the intrinsic symmetries of the nitrogen-vacancy centre to enable functionality at megabar pressures. We apply our technique to characterize a recently discovered hydride superconductor, CeH 9 . By performing simultaneous magnetometry and electrical transport measurements, we observe the dual signatures of superconductivity: diamagnetism characteristic of the Meissner effect and a sharp drop of the resistance to near zero. By locally mapping both the diamagnetic response and flux trapping, we directly image the geometry of superconducting regions, showing marked inhomogeneities at the micron scale. Our work brings quantum sensing to the megabar frontier and enables the closed-loop optimization of superhydride materials synthesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Quantifying uncertainty in analysis of shockless dynamic compression experiments on platinum. I. Inverse Lagrangian analysis

Absolute measurements of solid-material compressibility by magnetically driven shockless dynamic compression experiments to multi-megabar pressures have the potential to greatly improve the accuracy and precision of pressure calibration standards for use in diamond anvil cell experiments. Here, to this end, we apply characteristics-based inverse Lagrangian analysis (ILA) to 11 sets of ramp-compression data on pure platinum (Pt) metal and then reduce the resulting weighted-mean stress–strain curve to the principal isentrope and room-temperature isotherm using simple models for yield stress and Grüneisen parameter. We introduce several improvements to methods for ILA and quasi-isentrope reduction, the latter including calculation of corrections in wave speed instead of stress and pressure to render results largely independent of initial yield stress while enforcing thermodynamic consistency near zero pressure. More importantly, we quantify in detail the propagation of experimental uncertainty through ILA and model uncertainty through quasi-isentrope reduction, considering all potential sources of error except the electrode and window material models used in ILA. Compared to previous approaches, we find larger uncertainty in longitudinal stress. Monte Carlo analysis demonstrates that uncertainty in the yield-stress model constitutes by far the largest contribution to uncertainty in quasi-isentrope reduction corrections. We present a new room-temperature isotherm for Pt up to 444 GPa, with 1-sigma uncertainty at that pressure of just under ±1.2%; the latter is about a factor of three smaller than uncertainty previously reported for multi-megabar ramp-compression experiments on Pt. The result is well represented by a Vinet-form compression curve with (isothermal) bulk modulus K 0 = 270.3 ± 3.8 GPa, pressure derivative K$^{'}_{0}$= 5.66 ± 0.10, and correlation coefficient $R_{K_{0},K^{'}_{0}}$= –0.843.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Room-temperature superconductivity in boron- and nitrogen-doped lanthanum superhydride

Recent theoretical and experimental studies of hydrogen-rich materials at megabar pressures (i.e., >100 GPa) have led to the discovery of very high-temperature superconductivity in these materials. Lanthanum superhydride LaH10 has been of particular focus as the first material to exhibit a superconducting critical temperature (T c ) near room temperature. Experiments indicate that the use of ammonia borane as the hydrogen source can increase the conductivity onset temperatures of lanthanum superhydride to as high as 290 K. In this work, we examine the doping effects of B and N atoms on the superconductivity of LaH 10 in its fcc ($Fm\bar{3}m$) clathrate structure at megabar pressures. Doping at H atomic positions strengthens the H 32 cages of the structure to give higher phonon frequencies that enhance the Debye frequency and thus the calculated T c . The predicted T c can reach 288 K in LaH 9.985 N 0.015 within the average high-symmetry structure at 240 GPa. The remarkably large shift in T c to higher values produced by small degrees of chemical doping opens the prospect for the creation of still higher-temperature superconductivity in superhydrides potentially at even lower-pressure conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1992

Hydrogen at high pressure

Results of recent studies of the high-pressure states of hydrogen using diamond anvils are summarized. Problems associated with the study of hydrogen under megabar pressures are briefly examined. Attention is then given to new data on the physical state of solid hydrogen, the 1.5-megabar phase transition, changes in the electronic configuration of hydrogen at high pressure, and directions of further research on the high-pressure phases of hydrogen.

Mao, Ho-Kwang↗
DOE OSTI2020

Hole-doped room-temperature superconductivity in H 3 S 1-x Z (Z=C, Si)

We examine the effects of the low-level substitution of S atoms by C and Si atoms on the superconductivity of H 3 S with the Im3¯m structure at megabar pressures. The hole doping can fine-tune the Fermi energy to reach the electronic density-of-states peak maximizing the electron-phonon coupling. This can boost the critical temperature from the original 203 K to 289 K and 283 K, respectively, for H 3 S 0.962 C 0.038 at 260 GPa and H 3 S 0.960 Si 0.040 at 230 GPa. The former may provide an explanation for the recent experimental observation of room-temperature superconductivity in a highly compressed CeSeH system. Our work opens a new avenue for substantially raising the critical temperatures of hydrogen-rich materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Shock-induced phase transitions and stacking fault formation in additively manufactured eutectic high-entropy alloy Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2

Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 additively manufactured using laser powder bed fusion (LPBF) is among the toughest as-built alloys reported and is a promising candidate for use in extreme environments. However, its behavior under multi-megabar pressure regimes remains unexplored. We used femtosecond in situ X-ray diffraction to investigate the shock response of LPBF Ni40Co20Fe10Cr10Al18W2 under laser-driven shock compression and release. Our results reveal that the initial dual-phase face-centered + body-centered structure transforms to a single face-centered phase over a wide pressure range of 84±10 to 277±55 GPa, followed by a transition to a single body-centered phase at 431±48 GPa. We establish the Hugoniot equation-of-state of LPBF Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 and compare it to the benchmark alloy AlCoCrFeNi 2.1 , demonstrating the effects of W-doping and increased Al content. High stacking fault probabilities, close to those measured in Au and Ag, are observed upon compression. A portion of the stacking faults are annihilated upon release to ambient pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

RbB 3 Si 3 : An Alkali Metal Borosilicide that is Metastable and Superconducting at 1 atm

The stability, electronic structure and potential superconductivity in AB 3 Si 3 (A = Na, K, Rb, and Cs) compounds that assume the clathrate-based sodalite structure whose frameworks consists of covalent B-Si bonds is investigated via first-principles calculations. This structure type has recently been predicted in a number of high temperature superconducting hydrides, but these are only stable under megabar pressures. Herein, we predict a novel superconducting phase, RbB 3 Si 3 , that could be synthesized under pressures that are a factor of ten smaller, ~10 GPa, and quenched to atmospheric conditions. Electron-phonon coupling calculations predict that RbB 3 Si 3 possesses a superconducting critical temperature, T c , of 14 K at 1 atm. Here, the dynamic stability of RbB 3 Si 3 and CsB 3 Si 3 at ambient pressure can be explained by considering the chemical pressure exerted on the B-Si framework that is caused by the size effect of the alkali metal atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evidence of hydrogen-helium immiscibility at Jupiter-interior conditions

The phase behaviour of warm dense hydrogen–helium (H–He) mixtures affects our understanding of the evolution of Jupiter and Saturn and their interior structures. For example, precipitation of He from a H–He atmosphere at about 1–10 megabar and a few thousand kelvin has been invoked to explain both the excess luminosity of Saturn, and the depletion of He and neon (Ne) in Jupiter’s atmosphere as observed by the Galileo probe. But despite its importance, H–He phase behaviour under relevant planetary conditions remains poorly constrained because it is challenging to determine computationally and because the extremes of temperature and pressure are difficult to reach experimentally. Here we report that appropriate temperatures and pressures can be reached through laser-driven shock compression of H 2 –He samples that have been pre-compressed in diamond-anvil cells. This allows us to probe the properties of H–He mixtures under Jovian interior conditions, revealing a region of immiscibility along the Hugoniot. A clear discontinuous change in sample reflectivity indicates that this region ends above 150 gigapascals at 10,200 kelvin and that a more subtle reflectivity change occurs above 93 gigapascals at 4,700 kelvin. Considering pressure–temperature profiles for Jupiter, these experimental immiscibility constraints for a near-protosolar mixture suggest that H–He phase separation affects a large fraction—we estimate about 15 per cent of the radius—of Jupiter’s interior. Furthermore, this finding provides microphysical support for Jupiter models that invoke a layered interior to explain Juno and Galileo spacecraft observations.

79 ASTRONOMY AND ASTROPHYSICS↗