Search NASA⌕ Search

SEARCH · Search NASA

Results for “membrane pore”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mechanisms of electromagnetic field control on mineral scaling in brackish water reverse osmosis: Combined homogenous and heterogeneous nucleation

Electromagnetic field (EMF) treatment has emerged as a promising approach for scaling control due to its cost-effectiveness, simplicity, and low energy consumption. However, there is a limited understanding of the mechanisms by which applied EMF impacts mineral scaling in reverse osmosis (RO) systems. This has led to inconclusive and varied results and uncertainties regarding its effectiveness. This study elucidates the impacts of EMF on homogenous and heterogeneous nucleation and membrane performance during RO desalination of different feedwaters. Our results reveal that EMF exhibits greater efficacy in treating near-saturated water (SI∼0), especially when coupled with extended hydraulic flushing (HF). For saturated brackish water desalination, heterogeneous scaling predominantly occurs on membrane surfaces, with the effectiveness of EMF in inhibiting scaling primarily attributed to the hydration effect. In supersaturated solutions, EMF promotes bulk precipitation due to the magnetohydrodynamic effect, quickly blocking membrane pores. Thus, when the saturation reaches a certain high level during RO desalination, magnetohydrodynamic EMF effects can accelerate flux decline caused by homogeneous scaling. In conclusion, this work provides an efficient method for predicting EMF efficiency, emphasizing the importance of saturation conditions and HF cleaning duration in determining membrane performance, suggesting these show promise for improving undersaturated or near-saturated feedwater desalination via RO.

42 ENGINEERING↗
DOE OSTI2024

A lyotropic liquid crystal-templated nanofiltration membrane with thermo- and pH-responsive 3D transport pathway

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Self-assembled nanofiltration membranes with thermo- and pH-responsive behavior

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Performance evaluation of an industrial ceramic nanofiltration unit for wastewater treatment in oil production

An industrial ceramic nanofiltration membrane (pore size 0.9 nm) was tested in a Canadian oil field for more than 12,500 h to treat wastewater directly from daily operations, without any type of pre-treatment. This wastewater contained a high content of total suspended solids (13 to 510 mg/kg), and total organic carbon (31 to 134 mg/kg). The membrane unit was operated at different transmembrane pressure (TMP) set points (4–16 bar) and recovery set points (40–80%). The data show that ion and compound rejection depend strongly on a combination of both TMP and recovery, with the largest rejection occurring at low recovery values and high TMP values. Two mechanisms were responsible for rejection: sieving, which mostly impacted compound rejection, and electrostatic phenomena that impacted ion rejection. It is shown that ion rejection depends linearly on charge density of the ion. Ion rejection was measured as high as 85% and compounds (such as TSS) were rejected as high as 100%. The specific flux varied between 1–10 L/(m 2 .h.bar). Results from this field testing indicate the possibility of using these types of ceramic membranes for oil field wastewater treatment.

42 ENGINEERING↗
DOE OSTI2023

Multiscale modeling of solute diffusion in triblock copolymer membranes

We develop a multiscale simulation model for diffusion of solutes through porous triblock copolymer membranes. The approach combines two techniques: self-consistent field theory (SCFT) to predict the structure of the self-assembled, solvated membrane and on-lattice kinetic Monte Carlo (kMC) simulations to model diffusion of solutes. Solvation is simulated in SCFT by constraining the glassy membrane matrix while relaxing the brush-like membrane pore coating against the solvent. The kMC simulations capture the resulting solute spatial distribution and concentration-dependent local diffusivity in the polymer-coated pores; we parameterize the latter using particle-based simulations. We apply our approach to simulate solute diffusion through nonequilibrium morphologies of a model triblock copolymer, and we correlate diffusivity with structural descriptors of the morphologies. We also compare the model’s predictions to alternative approaches based on simple lattice random walks and find our multiscale model to be more robust and systematic to parameterize. Furthermore, our multiscale modeling approach is general and can be readily extended in the future to other chemistries, morphologies, and models for the local solute diffusivity and interactions with the membrane.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hydrophilic nanoparticles that kill bacteria while sparing mammalian cells reveal the antibiotic role of nanostructures

To dissect the antibiotic role of nanostructures from chemical moieties belligerent to both bacterial and mammalian cells, here we show the antimicrobial activity and cytotoxicity of nanoparticle-pinched polymer brushes (NPPBs) consisting of chemically inert silica nanospheres of systematically varied diameters covalently grafted with hydrophilic polymer brushes that are non-toxic and non-bactericidal. Assembly of the hydrophilic polymers into nanostructured NPPBs doesn’t alter their amicability with mammalian cells, but it incurs a transformation of their antimicrobial potential against bacteria, including clinical multidrug-resistant strains, that depends critically on the nanoparticle sizes. The acquired antimicrobial potency intensifies with small nanoparticles but subsides quickly with large ones. We identify a threshold size (d silica ~ 50 nm) only beneath which NPPBs remodel bacteria-mimicking membrane into 2D columnar phase, the epitome of membrane pore formation. This study illuminates nanoengineering as a viable approach to develop nanoantibiotics that kill bacteria upon contact yet remain nontoxic when engulfed by mammalian cells.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Ultrafiltration separation of Am(VI)-polyoxometalate from lanthanides

Partitioning of americium from lanthanides (Ln) present in used nuclear fuel plays a key role in the sustainable development of nuclear energy. This task is extremely challenging because thermodynamically stable Am(III) and Ln(III) ions have nearly identical ionic radii and coordination chemistry. Oxidization of Am(III) to Am(VI) produces AmO 2 2+ ions distinct with Ln(III) ions, which has the potential to facilitate separations in principle. However, the rapid reduction of Am(VI) back to Am(III) by radiolysis products and organic reagents required for the traditional separation protocols including solvent and solid extractions hampers practical redox-based separations. Herein, we report a nanoscale polyoxometalate (POM) cluster with a vacancy site compatible with the selective coordination of hexavalent actinides ( 238 U, 237 Np, 242 Pu and 243 Am) over trivalent lanthanides in nitric acid media. To our knowledge, this cluster is the most stable Am(VI) species in aqueous media observed so far. Ultrafiltration-based separation of nanoscale Am(VI)-POM clusters from hydrated lanthanide ions by commercially available, fine-pored membranes enables the development of a once-through americium/lanthanide separation strategy that is highly efficient and rapid, does not involve any organic components and requires minimal energy input.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Membrane absorption process for CO2 capture

Processes and systems for the capture of CO 2 from a CO 2 -containing gas stream are provided. The CO 2 -containing gas stream is passed to a membrane contactor absorber wherein the CO 2 -containing gas contacts or passes a first side of a membrane element while a CO 2 selective solvent with a viscosity between 0.2 and 7 cP contacts, passes or flows on second side of the membrane, opposed to the first side. The CO 2 permeates through the hollow fiber membrane pores and is chemically absorbed into the solvent.

Li, Shiguang↗
DOE OSTI2023

Ceramic thin-film composite membranes with tunable subnanometer pores for molecular sieving

Abstract Ceramic membranes are a promising alternative to polymeric membranes for selective separations, given their ability to operate under harsh chemical conditions. However, current fabrication technologies fail to construct ceramic membranes suitable for selective molecular separations. Herein, we demonstrate a molecular-level design of ceramic thin-film composite membranes with tunable subnanometer pores for precise molecular sieving. Through burning off the distributed carbonaceous species of varied dimensions within hybrid aluminum oxide films, we created membranes with tunable molecular sieving. Specifically, the membranes created with methanol showed exceptional selectivity toward monovalent and divalent salts. We attribute this observed selectivity to the dehydration of the large divalent ions within the subnanometer pores. As a comparison, smaller monovalent ions can rapidly permeate with an intact hydration shell. Lastly, the flux of neutral solutes through each fabricated aluminum oxide membrane was measured for the demonstration of tunable separation capability. Overall, our work provides the scientific basis for the design of ceramic membranes with subnanometer pores for molecular sieving using atomic layer deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Membrane synthesis via in-situ pore formation in silica gels through dynamic miscibility with soybean oil

The dynamic immiscibility between vegetable oil and organic silica precursors during sol-gel synthesis was used to tailor the microstructure of gels made with tetraethoxysilane (TEOS) or tetraethoxysilane+methyltrimethoxysilane (MTMS). Vegetable oil was investigated as an environmentally friendly and cheaper alternative to many other porogens. Oil concentrations of 9.09 v/v% and 33.33 v/v% were studied. For both TEOS and TEOS+MTMS gels, the miscibility of the oil and precursor decreases as the silica gel network forms, leading to oil-rich regions within the silica matrix. Gels containing MTMS maintained partial miscibility with the oil during gel formation due to the non-hydrolysable methyl groups on the MTMS. The pore structure of MTMS gels appeared more interconnected compared to the isolated pores observed in gels made with only TEOS. To create membranes with hierarchical pore structures, solvent exchanges were performed on gels or dried gels (i.e., xerogels) were calcined. The effect of the methyl group was also observed in the results of the time sweep rheology, as the addition of oil to the TEOS+MTMS gels caused an increase in the time to form the spanning gel. The trend was the opposite for oil additions to TEOS gels, which only contained polar groups. Xerogel membranes made with TEOS+MTMS had higher specific surface areas (SSAs) than those made with TEOS. For oil concentrations of 33.33 v/v%, xerogels made from TEOS+MTMS had an average SSA of 1068 + 113 m2 g-1, an order of magnitude higher than the average SSA of 103 + 6 m2 g-1 for xerogels made with TEOS.

sol-gel, dynamic immiscibility, oil-alkoxide inter↗
DOE OSTI2023

Water transport in reverse osmosis membranes is governed by pore flow, not a solution-diffusion mechanism

We performed nonequilibrium molecular dynamics (NEMD) simulations and solvent permeation experiments to unravel the mechanism of water transport in reverse osmosis (RO) membranes. The NEMD simulations reveal that water transport is driven by a pressure gradient within the membranes, not by a water concentration gradient, in marked contrast to the classic solution-diffusion model. We further show that water molecules travel as clusters through a network of pores that are transiently connected. Permeation experiments with water and organic solvents using polyamide and cellulose triacetate RO membranes showed that solvent permeance depends on the membrane pore size, kinetic diameter of solvent molecules, and solvent viscosity. This observation is not consistent with the solution-diffusion model, where permeance depends on the solvent solubility. Motivated by these observations, we demonstrate that the solution-friction model, in which transport is driven by a pressure gradient, can describe water and solvent transport in RO membranes.

42 ENGINEERING↗
DOE OSTI2024

Selective ion transport through hydrated micropores in polymer membranes

Abstract Ion-conducting polymer membranes are essential in many separation processes and electrochemical devices, including electrodialysis 1 , redox flow batteries 2 , fuel cells 3 and electrolysers 4,5 . Controlling ion transport and selectivity in these membranes largely hinges on the manipulation of pore size. Although membrane pore structures can be designed in the dry state 6 , they are redefined upon hydration owing to swelling in electrolyte solutions. Strategies to control pore hydration and a deeper understanding of pore structure evolution are vital for accurate pore size tuning. Here we report polymer membranes containing pendant groups of varying hydrophobicity, strategically positioned near charged groups to regulate their hydration capacity and pore swelling. Modulation of the hydrated micropore size (less than two nanometres) enables direct control over water and ion transport across broad length scales, as quantified by spectroscopic and computational methods. Ion selectivity improves in hydration-restrained pores created by more hydrophobic pendant groups. These highly interconnected ion transport channels, with tuned pore gate sizes, show higher ionic conductivity and orders-of-magnitude lower permeation rates of redox-active species compared with conventional membranes, enabling stable cycling of energy-dense aqueous organic redox flow batteries. This pore size tailoring approach provides a promising avenue to membranes with precisely controlled ionic and molecular transport functions.

Science & Technology - Other Topics↗
DOE OSTI2021

Adsorption-based membranes for air separation using transition metal oxides

In this work, we use computational modeling to examine the viability of adsorption-based pore-flow membranes for separating gases when a purely size-based separation strategy is ineffective. Using molecular dynamics simulations of O 2 and N 2 , we model permeation through a nanoporous graphene membrane. Permeation is assumed to follow a five-step adsorption-based pathway, with desorption being the rate-limiting step. Using this model, we observe increased selectivity between O 2 and N 2 , resulting from increased adsorption energy differences. We explore the limits of this strategy, providing an initial set of constraints that need to be satisfied to allow for selectivity. Finally, we provide a preliminary exploration of some transition metal oxides that appear to satisfy those conditions. Using density functional theory calculations, we confirm that these oxides possess adsorption energies needed to operate as adsorption-based pore-flow membranes. These adsorption energies provide a suitable motivation to examine adsorption-based pore-flow membranes as a viable option for air separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Insights into determining pore size properties of ultrafiltration membranes

The selectivity of porous membranes is often characterized using solute rejection tests, where membranes are challenged with dilute aqueous solutions of neutral solutes at operating conditions that minimize concentration polarization and fouling. In single solute tests, a membrane is challenged with one molecular weight (MW) solute at a time from low to high MW. Since single solute methods are time-intensive, mixed solute tests have become more common, where a mixture of several MW solutes challenges a membrane at once. However, the presence of large solutes in a mixture increases the rejection of smaller solutes. Furthermore, there are no universally accepted operating conditions or standard methods used by membrane manufacturers or researchers for the experiments, leading to difficulty in pore size and pore characteristic comparisons. In this paper, commercial ultrafiltration membranes were challenged with single and mixed solute polyethylene glycol (PEG) and dextran aqueous solutions. First, rejection values determined using total organic carbon (TOC) and high-performance liquid chromatography (HPLC) from single solute filtration experiments are compared. Differences in rejection curves obtained by the two techniques are attributed to solute polydispersity. Mixed solute filtration experiments with binary mixtures of solutes showcased co-solute interactions, which increase with both the size and weight percent of large solute in the mixture. Mixed solute filtration experiments at varying operating conditions (i.e., stir speed and flux) were conducted to determine operating conditions that mitigate co-solute interactions. Stir speed had a minimal effect on co-solute interactions. In contrast, low flux conditions can help minimize co-solute interactions, leading to pore size distributions that closely resemble results observed in single solute filtration using narrowly dispersed solutes. Additionally, at low flux conditions, the predicted membrane pore size distributions utilizing mixed solute experiments with PEG and dextran were similar.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Composite Behavior of Nanopore Array Large Memristors

Synthetic nanopores were recently demonstrated with memristive and nonlinear voltage-current behaviors, akin to ion channels in a cell membrane. Such ionic devices are considered a promising candidate for the development of brain-inspired neuromorphic computing techniques. In this work, we show the composite behavior of nanopore-array large memristors, formed with different membrane materials, pore sizes, electrolytes, and device arrangements. Anodic aluminum oxide (AAO) membranes with 5 nm and 20 nm diameter pores and track-etched polycarbonate (PCTE) membranes with 10 nm diameter pores are tested and shown to demonstrate memristive and nonlinear behaviors with approximately 107–1010 pores in parallel when electrolyte concentration across the membranes is asymmetric. Ion diffusion through the large number of channels induces time-dependent electrolyte asymmetry that drives the system through different memristive states. The behaviors of series composite memristors with different configurations are also presented. In addition to helping understand fluidic devices and circuits for neuromorphic computing, the results also shed light on the development of field-assisted ion-selection-membrane filtration techniques as well as the investigations of large neurons and giant synapses. Further work is needed to de-embed parasitic components of the measurement setup to obtain intrinsic large memristor properties.

Chemistry↗
DOE OSTI2026

Hydration size-dependent transport of ions across nanoporous graphene membranes

Nanoporous atomically-thin membranes are promising candidates for metal ion separations due to their chemical stability and high permeance and selectivity, but experimental evidence of the mechanisms responsible for ion-ion selectivity is sparse. Here, in this work, we measured the simultaneous diffusion of a dilute mixture of ten different Group I, Group II, and rare earth cations in a salt background across nanoporous graphene (NPG) membranes with sub-nanometer pores. The membranes exhibited ion-ion selectivity, including between similarly-charged ions. Cation transport was governed primarily by the hydrated ion size that was consistent with continuum models of ion diffusion, with additional influence of the ionic charge. Selectivity enhancement was achieved by modifying ion sizes using an ion-selective complexing agent. Our study provides evidence of the importance of size-sieving and electrostatic mechanisms governing ion transport across NPG, and allows for quantitative prediction of transport rates to guide future development of ion-selective atomically-thin membranes.

36 MATERIALS SCIENCE↗