Search NASA⌕ Search

SEARCH · Search NASA

Results for “memory window”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

GaAs metal-oxide-semiconductor based non-volatile flash memory devices with InAs quantum dots as charge storage nodes

Ultra-thin InP passivated GaAs metal-oxide-semiconductor based non-volatile flash memory devices were fabricated using InAs quantum dots (QDs) as charge storing elements by metal organic chemical vapor deposition technique to study the efficacy of the QDs as charge storage elements. The grown QDs were embedded between two high-k dielectric such as HfO{sub 2} and ZrO{sub 2}, which were used for tunneling and control oxide layers, respectively. The size and density of the QDs were found to be 5 nm and 1.8×10{sup 11} cm{sup −2}, respectively. The device with a structure Metal/ZrO{sub 2}/InAs QDs/HfO{sub 2}/GaAs/Metal shows maximum memory window equivalent to 6.87 V. The device also exhibits low leakage current density of the order of 10{sup −6} A/cm{sup 2} and reasonably good charge retention characteristics. The low value of leakage current in the fabricated memory device is attributed to the Coulomb blockade effect influenced by quantum confinement as well as reduction of interface trap states by ultra-thin InP passivation on GaAs prior to HfO{sub 2} deposition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of flash-memory elements using materials based on graphene

Charge capture on flash-memory test structures with floating gates made of graphene (few-layer graphene) and its compounds (graphene oxide and partially fluorinated graphene) is investigated. A comparison of the memory window for different structures has shown the potential of using reduced graphene oxide, graphene with only a few layers, and fluorographene. For the first time, partially fluorinated graphene has been employed as a floating gate in flash-memory structures. Graphene-based materials are promising for 2D printing technologies and flexible electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Remarkable charge-trapping efficiency of the memory device with (TiO{sub 2}){sub 0.8}(Al{sub 2}O{sub 3}){sub 0.1} composite charge-storage dielectric

A memory device p-Si/SiO{sub 2}/(TiO{sub 2}){sub 0.8}(Al{sub 2}O{sub 3}){sub 0.1}(TAO-81)/Al{sub 2}O{sub 3}/Pt was fabricated, in which a composite of two high-k dielectrics with a thickness of 1 nm was employed as the charge-trapping layer to enhance the charge-trapping efficiency of the memory device. At an applied gate voltage of ±9 V, TAO-81 memory device shows a memory window of 8.83 V in its C-V curve. It also shows a fast response to a short voltage pulse of 10{sup −5} s. The charge-trapping capability, the endurance, and retention characteristics of TAO-81 memory device can be improved by introducing double TAO-81 charge-trapping layers intercalated by an Al{sub 2}O{sub 3} layer. The charge-trapping mechanism in the memory device is mainly ascribed to the generation of the electron-occupied defect level in the band gap of Al{sub 2}O{sub 3} induced by the inter-diffusion between TiO{sub 2} and Al{sub 2}O{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive switching in ultra-thin La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/SrRuO{sub 3} superlattices

Superlattices may play an important role in next generation electronic and spintronic devices if the key-challenge of the reading and writing data can be solved. This challenge emerges from the coupling of low dimensional individual layers with macroscopic world. Here, we report the study of the resistive switching characteristics of a hybrid structure made out of a superlattice with ultrathin layers of two ferromagnetic metallic oxides, La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) and SrRuO{sub 3} (SRO). Bipolar resistive switching memory effects are measured on these LSMO/SRO superlattices, and the observed switching is explainable by ohmic and space charge-limited conduction laws. It is evident from the endurance characteristics that the on/off memory window of the cell is greater than 14, which indicates that this cell can reliably distinguish the stored information between high and low resistance states. The findings may pave a way to the construction of devices based on nonvolatile resistive memory effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Organic field-effect transistor nonvolatile memories utilizing sputtered C nanoparticles as nano-floating-gate

High-performance organic field-effect transistor nonvolatile memories have been achieved using sputtered C nanoparticles as the nano-floating-gate. The sputtered C nano-floating-gate is prepared with low-cost material and simple process, forming uniform and discrete charge trapping sites covered by a smooth and complete polystyrene layer. The devices show large memory window, excellent retention capability, and programming/reading/erasing/reading endurance. The sputtered C nano-floating-gate can effectively trap both holes and electrons, and it is demonstrated to be suitable for not only p-type but also n-type organic field-effect transistor nonvolatile memories.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low power zinc-oxide based charge trapping memory with embedded silicon nanoparticles via poole-frenkel hole emission

A low power zinc-oxide (ZnO) charge trapping memory with embedded silicon (Si) nanoparticles is demonstrated. The charge trapping layer is formed by spin coating 2 nm silicon nanoparticles between Atomic Layer Deposited ZnO steps. The threshold voltage shift (ΔV{sub t}) vs. programming voltage is studied with and without the silicon nanoparticles. Applying −1 V for 5 s at the gate of the memory with nanoparticles results in a ΔV{sub t} of 3.4 V, and the memory window can be up to 8 V with an excellent retention characteristic (>10 yr). Without nanoparticles, at −1 V programming voltage, the ΔV{sub t} is negligible. In order to get ΔV{sub t} of 3.4 V without nanoparticles, programming voltage in excess of 10 V is required. The negative voltage on the gate programs the memory indicating that holes are being trapped in the charge trapping layer. In addition, at 1 V the electric field across the 3.6 nm tunnel oxide is calculated to be 0.36 MV/cm, which is too small for significant tunneling. Moreover, the ΔV{sub t} vs. electric field across the tunnel oxide shows square root dependence at low fields (E < 1 MV/cm) and a square dependence at higher fields (E > 2.7 MV/cm). This indicates that Poole-Frenkel Effect is the main mechanism for holes emission at low fields and Phonon Assisted Tunneling at higher fields.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge trapping characteristics of Au nanocrystals embedded in remote plasma atomic layer-deposited Al{sub 2}O{sub 3} film as the tunnel and blocking oxides for nonvolatile memory applications

Remote plasma atomic layer deposited (RPALD) Al{sub 2}O{sub 3} films were investigated to apply as tunnel and blocking layers in the metal-oxide-semiconductor capacitor memory utilizing Au nanocrystals (NCs) for nonvolatile memory applications. The interface stability of an Al{sub 2}O{sub 3} film deposited by RPALD was studied to observe the effects of remote plasma on the interface. The interface formed during RPALD process has high oxidation states such as Si{sup +3} and Si{sup +4}, indicating that RPALD process can grow more stable interface which has a small amount of fixed oxide trap charge. The significant memory characteristics were also observed in this memory device through the electrical measurement. The memory device exhibited a relatively large memory window of 5.6 V under a 10/-10 V program/erase voltage and also showed the relatively fast programming/erasing speed and a competitive retention characteristic after 10{sup 4} s. These results indicate that Al{sub 2}O{sub 3} films deposited via RPALD can be applied as the tunnel and blocking oxides for next-generation flash memory devices.

36 MATERIALS SCIENCE↗

CF{sub 4} plasma treatment on nanostructure band engineered Gd{sub 2}O{sub 3}-nanocrystal nonvolatile memory

The effects of CF{sub 4} plasma treatment on Gd{sub 2}O{sub 3} nanocrystal (NC) memory were investigated. For material analysis, secondary ion mass spectrometry and x-ray photoelectron spectroscopy analyses were performed to characterize the fluorine depth profile of the Gd{sub 2}O{sub 3}-NC film. In addition, an UV-visible spectrophotometer was used to obtain the Gd{sub 2}O{sub 3} bandgap and analyzed to suggest the modified structure of the energy band. Moreover, the electrical properties, including the memory window, program/erase speed, charge retention, and endurance characteristics were significantly improved depending on the CF{sub 4} plasma treatment conditions. This can be explained by the physical model based on the built-in electric field in the Gd{sub 2}O{sub 3} nanostructure. However, it was observed that too much CF{sub 4} plasma caused large surface roughness induced by the plasma damage, leading to characteristics degradation. It was concluded that with suitable CF{sub 4} plasma treatment, this Gd{sub 2}O{sub 3}-NC memory can be applied to future nonvolatile memory applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High performance non-volatile ferroelectric copolymer memory based on a ZnO nanowire transistor fabricated on a transparent substrate

A high performance ferroelectric non-volatile memory device based on a top-gate ZnO nanowire (NW) transistor fabricated on a glass substrate is demonstrated. The ZnO NW channel was spin-coated with a poly (vinylidenefluoride-co-trifluoroethylene) (P(VDF-TrFE)) layer acting as a top-gate dielectric without buffer layer. Electrical conductance modulation and memory hysteresis are achieved by a gate electric field induced reversible electrical polarization switching of the P(VDF-TrFE) thin film. Furthermore, the fabricated device exhibits a memory window of ∼16.5 V, a high drain current on/off ratio of ∼10{sup 5}, a gate leakage current below ∼300 pA, and excellent retention characteristics for over 10{sup 4} s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multilevel characteristics and memory mechanisms for nonvolatile memory devices based on CuInS{sub 2} quantum dot-polymethylmethacrylate nanocomposites

Nonvolatile memory devices based on CuInS{sub 2} (CIS) quantum dots (QDs) embedded in a polymethylmethacrylate (PMMA) layer were fabricated using spin-coating method. The memory window widths of the capacitance-voltage (C-V) curves for the Al/CIS QDs embedded in PMMA layer/p-Si devices were 0.3, 0.6, and 1.0 V for sweep voltages of ±3, ±5, and ±7 V, respectively. Capacitance-cycle data demonstrated that the charge-trapping capability of the devices with an ON/OFF ratio value of 2.81 × 10{sup −10} was maintained for 8 × 10{sup 3} cycles without significant degradation and that the extrapolation of the ON/OFF ratio value to 1 × 10{sup 6} cycles converged to 2.40 × 10{sup −10}, indicative of the good stability of the devices. The memory mechanisms for the devices are described on the basis of the C-V curves and the energy-band diagrams.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Oxygen plasma immersion ion implantation treatment to enhance data retention of tungsten nanocrystal nonvolatile memory

Data retention characteristics of tungsten nanocrystal (W-NC) memory devices using an oxygen plasma immersion ion implantation (PIII) treatment are investigated. With an increase of oxygen PIII bias voltage and treatment time, the capacitance–voltage hysteresis memory window is increased but the data retention characteristics become degraded. High-resolution transmission electron microscopy images show that this poor data retention is a result of plasma damage on the tunneling oxide layer, which can be prevented by lowering the bias voltage to 7 kV. In addition, by using the elevated temperature retention measurement technique, the effective charge trapping level of the WO{sub 3} film surrounding the W-NCs can be extracted. This measurement reveals that a higher oxygen PIII bias voltage and treatment time induces more shallow traps within the WO{sub 3} film, degrading the retention behavior of the W-NC memory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The roles of the dielectric constant and the relative level of conduction band of high-k composite with Si in improving the memory performance of charge-trapping memory devices

The memory structures Pt/Al{sub 2}O{sub 3}/(TiO{sub 2}){sub x}(Al{sub 2}O{sub 3}){sub 1−x}/Al{sub 2}O{sub 3}/p-Si(nominal composition x = 0.05, 0.50 and 0.70) were fabricated by using rf-magnetron sputtering and atomic layer deposition techniques, in which the dielectric constant and the bottom of the conduction band of the high-k composite (TiO{sub 2}){sub x}(Al{sub 2}O{sub 3}){sub 1−x} were adjusted by controlling the partial composition of Al{sub 2}O{sub 3}. With the largest dielectric constant and the lowest deviation from the bottom of the conduction band of Si, (TiO{sub 2}){sub 0.7}(Al{sub 2}O{sub 3}){sub 0.3} memory devices show the largest memory window of 7.54 V, the fast programming/erasing speed and excellent endurance and retention characteristics, which were ascribed to the special structural design, proper combination of dielectric constant and band alignment in the high-k composite (TiO{sub 2}){sub 0.7}(Al{sub 2}O{sub 3}){sub 0.3}.

36 MATERIALS SCIENCE↗

Low-power resistive random access memory by confining the formation of conducting filaments

Owing to their small physical size and low power consumption, resistive random access memory (RRAM) devices are potential for future memory and logic applications in microelectronics. In this study, a new resistive switching material structure, TiO{sub x}/silver nanoparticles/TiO{sub x}/AlTiO{sub x}, fabricated between the fluorine-doped tin oxide bottom electrode and the indium tin oxide top electrode is demonstrated. The device exhibits excellent memory performances, such as low operation voltage (<±1 V), low operation power, small variation in resistance, reliable data retention, and a large memory window. The current-voltage measurement shows that the conducting mechanism in the device at the high resistance state is via electron hopping between oxygen vacancies in the resistive switching material. When the device is switched to the low resistance state, conducting filaments are formed in the resistive switching material as a result of accumulation of oxygen vacancies. The bottom AlTiO{sub x} layer in the device structure limits the formation of conducting filaments; therefore, the current and power consumption of device operation are significantly reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detailed investigation of defect states in Erbium doped In2O3 thin films

Highlights: • SIMS analysis confirmed the doping of Er into the In{sub 2}O{sub 3} TF. • I–V loop analysis gives reduced current memory window for In{sub 2}O{sub 3}:Er TF based device. • High ideality factor was determined at low temperature and explained. • Defect related photoconductivity was confirmed from low temperature measurement. • 10 K temporal response of the Au/In{sub 2}O{sub 3}:Er/Si confirmed removal of oxygen defects. - Abstract: Erbium doped Indium Oxide (In{sub 2}O{sub 3}:Er) thin films (TFs) were synthesised by spin-on technique. Secondary Ion Mass Spectrometry confirmed that Er is incorporated into the In{sub 2}O{sub 3} lattice and formed an In-O-Er layer. The current–voltage loop produced a lower loop current window of ∼3.6 × 10{sup −4} A for In{sub 2}O{sub 3}:Er TF based devices. The Au/In{sub 2}O{sub 3}:Er/Si Schottky devices have lower ideality factor (∼6) and higher barrier height (∼0.63 eV) at 300 K than Au/In{sub 2}O{sub 3}/Si control samples. A blue shift in the main band-gap (∼50 nm) was calculated for In{sub 2}O{sub 3}:Er TFs from 10 K photoresponse. The Au/In{sub 2}O{sub 3}:Er/Si samples show higher photosensitivity in the temperature range 10 K–300 K and maximum (∼15 times) in the UV region at 10 K as compared to the Au/In{sub 2}O{sub 3}/Si devices. In addition, the Au/In{sub 2}O{sub 3}:Er/Si devices have better UV to visible cut-off ratio (∼3 times). Excellent temporal responses were recorded for Au/In{sub 2}O{sub 3}:Er/Si in the UV region as compared to Au/In{sub 2}O{sub 3}/Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frequency dependent dynamical electromechanical response of mixed ionic-electronic conductors

Frequency dependent dynamic electromechanical response of the mixed ionic-electronic conductor film to a periodic electric bias is analyzed for different electronic and ionic boundary conditions. Dynamic effects of mobile ions concentration (stoichiometry contribution), charge state of acceptors (donors), electron concentration (electron-phonon coupling via the deformation potential) and flexoelectric effect contribution are discussed. A variety of possible nonlinear dynamic electromechanical response of MIEC films including quasi-elliptic curves, asymmetric hysteresis-like loops with pronounced memory window and butterfly-like curves are calculated. The electromechanical response of ionic semiconductor is predicted to be a powerful descriptor of local valence states, band structure and electron-phonon correlations that can be readily measured in the nanoscale volumes and in the presence of strong electronic conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ambipolar organic thin-film transistor-based nano-floating-gate nonvolatile memory

An ambipolar organic thin-film transistor-based nano-floating-gate nonvolatile memory was demonstrated, with discrete distributed gold nanoparticles, tetratetracontane (TTC), pentacene as the floating-gate layer, tunneling layer, and active layer, respectively. The electron traps at the TTC/pentacene interface were significantly suppressed, which resulted in an ambipolar operation in present memory. As both electrons and holes were supplied in the channel and trapped in the floating-gate by programming/erasing operations, respectively, i.e., one type of charge carriers was used to overwrite the other, trapped, one, a large memory window, extending on both sides of the initial threshold voltage, was realized.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced memory effect via quantum confinement in 16 nm InN nanoparticles embedded in ZnO charge trapping layer

In this work, the fabrication of charge trapping memory cells with laser-synthesized indium-nitride nanoparticles (InN-NPs) embedded in ZnO charge trapping layer is demonstrated. Atomic layer deposited Al{sub 2}O{sub 3} layers are used as tunnel and blocking oxides. The gate contacts are sputtered using a shadow mask which eliminates the need for any lithography steps. High frequency C-V{sub gate} measurements show that a memory effect is observed, due to the charging of the InN-NPs. With a low operating voltage of 4 V, the memory shows a noticeable threshold voltage (V{sub t}) shift of 2 V, which indicates that InN-NPs act as charge trapping centers. Without InN-NPs, the observed memory hysteresis is negligible. At higher programming voltages of 10 V, a memory window of 5 V is achieved and the V{sub t} shift direction indicates that electrons tunnel from channel to charge storage layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scaling behavior of hysteresis in multilayer MoS{sub 2} field effect transistors

Extrinsic hysteresis effects are often observed in MoS{sub 2} field effect devices due to adsorption of gas molecules on the surface of MoS{sub 2} channel. Scaling is a common method used in ferroics to quantitatively study the hysteresis. Here, the scaling behavior of hysteresis in multilayer MoS{sub 2} field effect transistors with a back-gated configuration was investigated. The power-law scaling relations were obtained for hysteresis area (〈A〉) and memory window (ΔV) with varying the region of back-gate voltage (V{sub bg,max}). It is interesting to find that the transition voltage in the forward sweep (V{sub FW}) and in the backward sweep (V{sub BW}) shifted to the opposite directions of back-gate voltage (V{sub bg}) with increasing V{sub bg,max}. However, when decreasing V{sub bg,max}, V{sub FW} shifted to positive and reversibly recovered, but V{sub BW} almost kept unchanged. The evolution of 〈A〉, ΔV, V{sub FW,} and V{sub BW} with V{sub bg,max} were discussed by the electrons transferring process between the adsorbate and MoS{sub 2} channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗