Search NASA⌕ Search

SEARCH · Search NASA

Results for “mercury oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

High rate, high reliability Li/SO2 cells

The use of the lithium/sulfur dioxide system for aerospace applications is discussed. The high rate density in the system is compared to some primary systems: mercury zinc, silver zinc, and magnesium oxide. Estimates are provided of the storage life and shelf life of typical lithium sulfur batteries. The design of lithium cells is presented and criteria are given for improving the output of cells in order to achieve high rate and high reliability.

Chireau, R.↗

Experimental Investigation of Chromium Behavior During Mercury's Differentiation

Mercury is the most reduced terrestrial planet with the largest core/mantle size ratio and highest sulfur concentration on the surface. The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft data allowed mapping of Mercury's surface elemental composition. Recent chromium mapping suggests Mercury's surface has on average 800 parts per million Cr with the highest values in the High Magnesium Region. These new data can give clues about Mercury's internal structure and the redox conditions under which it differentiated. In the present study, we present experimental data on the distribution of Cr among metal, silicate and sulfide liquids. We then combine them with data from previous studies and a model of planetary differentiation to discuss Mercury's bulk composition and its oxidation state.

Boujibar, A.↗

Carbon Solubility in Silicon-Iron-Bearing Metals during Core Formation on Mercury

Recent results obtained from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft showed the surface of Mercury has high S abundances (approximately 4 wt%) and low Iron(II) Oxide abundances (less than 2 wt%). Based on these extreme values, the oxygen fugacity of Mercury's surface materials was estimated to be approximately 3 to 7 log(sub 10) units below the IW buffer (Delta IW-3 to Delta IW-7). This highly reducing nature of the planet has resulted in a large core and relatively thin mantle, extending to only approximately 420 km depth (corresponding to a core-mantle boundary pressure of approximately 4-7 GPa) within the planet. Furthermore, MESSENGER results have suggested the presence of carbon on the surface of the planet. Previous experimental results from have also suggested the possibility of a primary floatation crust on Mercury composed of graphite, produced after a global magma ocean event. With these exotic conditions of this compositional end-member planet, it begs the question, what is the core composition of Mercury? Although no definitive conclusion has been reached, previous studies have made advances towards answering this question. Riner et al. and Chen et al. looked at iron sulfide systems and implemented various crystallization and layered core scenarios to try and determine the composition and structure of Mercury's core. Malavergne et al. examined core crystallization scenarios in the presence of sulfur and silicon. Hauck et al. used the most recent geophysical constraints from the MESSENGER spacecraft to model the internal structure of Mercury, including the core, in a iron-sulfur-silicon system. More recently, Chabot et al. conducted a series of metal-silicate partitioning experiments in a iron-sulfur-silicon system. These results showed the core of Mercury has the potential to contain more than 15 wt% silicon. However, with the newest results from MESSENGER's low altitude campaign, carbon is another potential light element that could be incorporated into Mercury's core. The goal of this study is to determine the carbon concentration at graphite saturation in various silicon-iron bearing metals relevant to possible mercurian core compositions. Future experiments will include the addition of sulfur into these metals.

Vander Kaaden, Kathleen E.↗

Mercury: Evidence for anorthosite and basalt from mid-infrared (7.3-13.5 micrometers) spectroscopy

Spectroscopic observations (7.3-13.5 micrometers) of three locations on the surface of Mercury are reported. The observed spectral radiance emanated from equatorial and low altitude regions between 12 and 32 deg mercurian longitude on 8 December 1990, from the longitudinal region 22-44 deg on 10 December 1990, and from the longitudinal region 110-130 deg on 12 July 1992; all locations are primarily intercrater plains. Spectra indicate compositional differences among these three locations. The emissivity maximum, or Christiansen emission peak, occurs at 8.1 micrometers in the 8 December 1990 spectra, but at shorter wavelengths in the data of 10 December 1990 and 12 July 1992. Emission peaks near 8 micrometers indicate rocks of intermediate or mafic composition. Spectra from 22 to 44 deg longitude resemble spectra of terrestrial basalt and diorite with SiO2 content between 49 and 55%. The Christiansen feature in spectra from near 110-130 deg longitude strongly suggests the presence of plagioclase, in particular labradorite, while the overall spectrum resembles anorthosite. The spectra from all three locations on Mercury show distinct and recognizable features, the principal Christiansen emission peak being the most prominent, but they also contain features that we have not yet identified. The general indication from the spectra is that Mercury's surface consists of minerals more depleted in oxidized iron than those on the Moon. We also explore the theoretical and observational complexities of ground-based mid-infrared spectroscopy of airless bodies in general and Mercury in particular. A spectroscopic study of quartzite in both reflectance and emittance illustrates the practical, spectral validity of Kirchhoff's law.

Sprague, A. L.↗

A study of the deposition of carbide coatings on graphite fibers

The chemical vapor deposition of boron carbide and silicon carbide on graphite fibers to increase their electrical resistance was studied. Silicon carbide coatings were applied without degradation of the mechanical properties of the filaments. These coatings typically added 1000 ohms to the resistance of a filament as measured between two mercury pools. When SiC-coated filaments were oxidized by refluxing in boiling phosphoric acid, average resistance increased by an additional 1000 ohms; in addition resistance increases as high as 150 K ohms and breakdown voltages as high as 17 volts were noted. Data on boron carbide coatings indicated that such coatings would not be effective in increasing resistance, and would degrade the mechanical properties.

Suplinskas, R. J.↗

Relationships between chondritic meteorites and planets

Chondrites formed in the solar nebula prior to the formation of planets; they probably constituted the bulk of preplanetary solids in the inner solar system. In the highly reduced enstatite chondrites 10% of Si is metallic; in the highly oxidized CM and CI chondrites 20-30% of Fe is in the +3 state. The high density of Mercury implies that nebular Fe was reduced, whereas the low density of Mars indicates that a large fraction was oxidized. Most rare gases in the terrestrial planets seem to have accreted trapped in grains; Venusian interelement ratios resemble those in enstatite chondrites; Earth and Mars ratios are more like those in ordinary or carbonaceous chondrites. These observations imply that enstatite chondrites formed near the Sun (near Venus?), the carbonaceous chondrites formed far from the Sun, the ordinary chondrites at an intermediate location. Compositional data on Mercury, comets, an asteroidal fragment, and the moons of Mars are badly needed.

Wasson, J. T.↗

Link Between Arctic Tropospheric BrO Explosion Observed from Space and Sea-Salt Aerosols from Blowing Snow Investigated Using Ozone Monitoring Instrument BrO Data and GEOS-5 Data Assimilation System

Bromine radicals (Br + BrO) are important atmospheric species owing to their ability to catalytically destroy ozone as well as their potential impacts on the oxidative pathways of many trace gases, including dimethylsulfide and mercury. Using space-based observations of BrO, recent studies have reported rapid enhancements of tropospheric BrO over large areas (so called "BrO explosions") connected to near-surface ozone depletion occurring in polar spring. However, the source(s) of reactive bromine and mechanism(s) that initiate these BrO explosions are uncertain. In this study, we investigate the relationships between Arctic BrO explosions and two of the proposed sources of reactive bromine: sea-salt aerosol (SSA) generated from blowing snow and first-year (seasonal) sea ice. We use tropospheric column BrO derived from the Ozone Monitoring Instrument (OMI) in conjunction with the Goddard Earth Observing System Version 5 (GEOS-5) data assimilation system provided by National Aeronautics and Space Administration Global Modeling and Assimilation Office. Case studies demonstrate a strong association between the temporal and spatial extent of OMI-observed BrO explosions and the GEOS-5 simulated blowing snow-generated SSA during Arctic spring. Furthermore, the frequency of BrO explosion events observed over the 11-year record of OMI exhibits significant correlation with a time series of the simulated SSA emission flux in the Arctic and little to no correlation with a time series of satellite-based first-year sea ice area. Therefore, we conclude that SSA generated by blowing snow is an important factor in the formation of the BrO explosion observed from space during Arctic spring.

blowing snow↗

Thermodynamic reactivity, growth and characterization of mercurous halide crystals

Thermodynamic calculations were carried out for the Hg-X-O system (X = Cl, Br, I) to identify the potential sources of contamination and relative stability of oxides and oxy-halide phases. The effect of excess mercury vapor pressure on the optical quality of mercurous halide crystal was studied by growing several mercurous chloride crystals from mercury-rich composition. The optical quality of crystals was examined by birefringence interferometry and laser scattering studies. Crystals grown in slightly mercury-rich composition showed improved optical quality relative to stoichiometric crystals.

Singh, N. B.↗

Calcium and Magnesium Distribution Between Sulfide and Silicate Melts: Thermodynamic Modeling and Insights into Mercury's Mantle-Crust Differentiation

Mercury stands out as the terrestrial planet with the lowest degree of oxidation among all planets of our solar system. It is characterized by a high abundance of sulfur, which is expected to replace oxygen in silicate melts. This sulfur enrichment could lead to sulfide saturation in its mantle, potentially resulting in the formation of sulfides rich in calcium and magnesium. Utilizing experimental data from the literature, we constructed a thermodynamic model to explore the partitioning of calcium and magnesium between sulfide and silicate melts. This model aims to improve our comprehension of the chemical equilibria driving the process of mantle-crust differentiation on Mercury. Our models indicate that increased temperature, decreased pressure, and low concentrations of iron, oxygen, and carbon within the sulfide phase, along with low sulfur concentrations in the silicate phase, favor calcium’s partitioning into the sulfide. Additionally, magnesium partitioning into the sulfide melt is favored with decreased pressure, decreased temperature, low concentrations of iron and calcium within the sulfide, and low concentrations of sulfur within the silicate. Our results suggest that up 9.4% and 5.6% Ca and Mg, respectively, can be present in sulfides equilibrated with sulfide-saturated silicate melts during mantle-crust differentiation. Further investigation will focus on the distribution of sulfide phases within the mantle and crust to better constrain Mercury’s internal structure.

Taylor McCombs↗

Oxygen Depletion on the Surface of Mercury: Evidence of Silicon Smelting?

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft collected data that provided important insights into the structure, chemical makeup, and compositional diversity of Mercury. The X-Ray Spectrometer (XRS) and Gamma-Ray Spectrometer (GRS) onboard MESSENGER provided the first detailed chemical analyses of Mercury's surface. Among the many discoveries included several surprising characteristics about the surface of Mercury, including elevated S abundances (up to 4 percent by weight), low Fe abundances (less than 4 percent by weight), and relatively low O abundances (O/Si ratio of 1.40 plus or minus 0.03). The surface chemistry as determined by MESSENGER has been used to identify up to nine distinct geochemical terranes on Mercury. Numerous modeling and experimental efforts have been undertaken to infer the mineralogy and petrology of mercurian lavas and surface materials. However, all of these efforts have presumed valence states for each of the elements according to the following: Si4+, Ti4+, Al3+, Cr2+, Fe2+, Mn2+, Mg2+, Ca2+, Na+, K+, S2-, Cl-. Based on these valence assignments, cations are charged balanced with the anions O2-, S2-, and Cl- and the compositions are recast in terms of oxides, sulfides, and chlorides. Based on these assumptions, the geochemical terranes that have been identified on Mercury yield O/Si wt. ratios ranging from 1.61 to 1.84, which is substantially higher than the preliminary O/Si ratio of 1.40 plus or minus 0.03 determined by the MESSENGER GRS]. We have re-evaluated the O/Si ratio using the entire MESSENGER dataset to reassess its implications for the geochemistry of Mercury.

McCubbin, F. M.↗

Single Crystal Synthesis and STM Studies of High Temperature Superconductors

This is a final report for the work initiated in September of 1994 under the grant NAG8-1085 - NASA/OMU, on the fabrication of bulk and single crystal synthesis, specific heat measuring and STM studies of high temperature superconductors. Efforts were made to fabricate bulk and single crystals of mercury based superconducting material. A systematic thermal analysis on the precursors for the corresponding oxides and carbonates were carried out to synthesized bulk samples. Bulk material was used as seed in an attempt to grow single crystals by a two-step self flux process. On the other hand bulk samples were characterized by x-ray diffraction, electrical resistivity and magnetic susceptibility, We studied the specific heat behavior in the range from 80 to 300 K. Some preliminary attempts were made to study the atomic morphology of our samples. As part of our efforts we built an ac susceptibility apparatus for measuring the transition temperature of our sintered samples.

Barrientos, Alfonso↗

Visible-Light-Responsive Photocatalysis: Ag-Doped TiO2 Catalyst Development and Reactor Design Testing

In recent years, the alteration of titanium dioxide to become visible-light-responsive (VLR) has been a major focus in the field of photocatalysis. Currently, bare titanium dioxide requires ultraviolet light for activation due to its band gap energy of 3.2 eV. Hg-vapor fluorescent light sources are used in photocatalytic oxidation (PCO) reactors to provide adequate levels of ultraviolet light for catalyst activation; these mercury-containing lamps, however, hinder the use of this PCO technology in a spaceflight environment due to concerns over crew Hg exposure. VLR-TiO2 would allow for use of ambient visible solar radiation or highly efficient visible wavelength LEDs, both of which would make PCO approaches more efficient, flexible, economical, and safe. Over the past three years, Kennedy Space Center has developed a VLR Ag-doped TiO2 catalyst with a band gap of 2.72 eV and promising photocatalytic activity. Catalyst immobilization techniques, including incorporation of the catalyst into a sorbent material, were examined. Extensive modeling of a reactor test bed mimicking air duct work with throughput similar to that seen on the International Space Station was completed to determine optimal reactor design. A bench-scale reactor with the novel catalyst and high-efficiency blue LEDs was challenged with several common volatile organic compounds (VOCs) found in ISS cabin air to evaluate the system's ability to perform high-throughput trace contaminant removal. The ultimate goal for this testing was to determine if the unit would be useful in pre-heat exchanger operations to lessen condensed VOCs in recovered water thus lowering the burden of VOC removal for water purification systems.

Photocatalysis↗

Scientific objectives of the primitive body sample return missions: An approach from the light-induced effect on water vapor

Water is undoubtedly one of the most crucial components of the solar nebula for determining planetary composition: planets were formed from the accretion of the dust particles in the nebula, and the redox state of Fe in the particles can be determined by the reaction of Fe with water vapor diffused into the interior of the particle in the early stage of solar system formation. It has been discussed from various observations that the cores of Mercury, Venus, and the Earth might be metallic Fe, although the core of the Earth may be somewhat oxidized by the high pressure and temperature reaction of liquid Fe with perovskite at the boundary of the mantle and the core, whereas the core of Mars may be highly oxidized, as suggested by its low density. Isotopic anomalies of various elements have frequently been observed in the solar system (in planetary atmospheres and in meteorites) and some of them can be attributed to the injection of exotic particles formed in other stars into the solar nebula. Hydrogen and D anomalies in planetary atmospheres were frequently believed to correlate with the differential escape of H and D from the exospheres of Venus and Mars, although no one knows the primordial D/H ratios before thermal escape. This paper explains the decrease of the observed D/H ratios with distance from the sun by considering the light-induced drift effect to displace H2(16)O alone to the outside in the solar nebula.

Shimizu, Mikio↗

Internal erosion rates of a 10-kW xenon ion thruster

A 30 cm diameter divergent magnetic field ion thruster, developed for mercury operation at 2.7 kW, was modified and operated with xenon propellant at a power level of 10 kW for 567 h to evaluate thruster performance and lifetime. The major differences between this thruster and its baseline configuration were elimination of the three mercury vaporizers, use of a main discharge cathode with a larger orifice, reduction in discharge baffle diameter, and use of an ion accelerating system with larger acceleration grid holes. Grid thickness measurement uncertainties, combined with estimates of the effects of reactive residual facility background gases gave a minimum screen grid lifetime of 7000 h. Discharge cathode orifice erosion rates were measured with three different cathodes with different initial orifice diameters. Three potential problems were identified during the wear test: the upstream side of the discharge baffle eroded at an unacceptable rate; two of the main cathode tubes experienced oxidation, deformation, and failure; and the accelerator grid impingement current was more than an order of magnitude higher than that of the baseline mercury thruster. The charge exchange ion erosion was not quantified in this test. There were no measurable changes in the accelerator grid thickness or the accelerator grid hole diameters.

Rawlin, Vincent K.↗

Internal erosion rates of a 10-kW xenon ion thruster

A 30 cm diameter divergent magnetic field ion thruster, developed for mercury operation at 2.7 kW, was modified and operated with xenon propellant at a power level of 10 kW for 567 h to evaluate thruster performance and lifetime. The major differences between this thruster and its baseline configuration were elimination of the three mercury vaporizers, use of a main discharge cathode with a larger orifice, reduction in discharge baffle diameter, and use of an ion accelerating system with larger acceleration grid holes. Grid thickness measurement uncertainties, combined with estimates of the effects of reactive residual facility background gases gave a minimum screen grid lifetime of 7000 h. Discharge cathode orifice erosion rates were measured with three different cathodes with different initial orifice diameters. Three potential problems were identified during the wear test: the upstream side of the discharge baffle eroded at an unacceptable rate; two of the main cathode tubes experienced oxidation, deformation, and failure; and the accelerator grid impingement current was more than an order of magnitude higher than that of the baseline mercury thruster. The charge exchange ion eroison was not quantified in this test. There were no measurable changes in the accelerator grid thickness or the accelerator grid hole diameters.

Rawlin, Vincent K.↗

SNC meteorites - Igneous rocks from Mars

It is argued that SNC (shergottite, nakhlite, chassignite) meteorites are ejecta from Mars. The mineralogy and chemistry of these objects is discussed, including rare earth element content, potassium/uranium ratios, oxidation state, oxygen isotopes, ages and isotopic evolution, magnetism, shock and texture. The possibility of SNC's deriving from Mercury, Venus, earth, moon, or a eucrite parent body is argued against. Mercury is too volatile-poor and anhydrous, Venus's atmosphere too thick and hot and its gravitational field too large, earth's oxygen isotope content too different from that of SNC's, the moon too different isotopically and chemically, and the ages of eucrites too different. Models suggest that SNC's could have escaped from Mars's gravitational field, and their composition supports Martian origin. Statistically, they could have reached the earth within their measured shock ages. Objections to the hypothesis are also discussed.

Wood, C. A.↗

Origin and composition of Mercury

The predictions of the expected range of composition of Mercury at the time of its formation made on the basis of a suite of condensation-accretion models of Mercury spanning a range of condensation temperature and accretion sampling functions appropriate to Mercury are examined. It is concluded that these compositonal models can, if modified to take into account the nonselective loss of most of the silicate component of the planet during accretion, provide compositional predictions for the Weidenschilling (1978, 1980) mechanism for the accretion of a metal-rich Mercury. The silicate portion would, in this case, contain 3.6 to 4.5 percent alumina, roughly 1 percent of alkali oxides, and between 0.5 and 6 percent FeO.

Lewis, John S.↗