SEARCH · Search NASA

Results for “mixing demonstration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Measurements of Infrared and Acoustic Source Distributions in Jet Plumes

The aim of this investigation was to use the linear phased array (LPA) microphones and infrared (IR) imaging to study the effects of advanced nozzle-mixing techniques on jet noise reduction. Several full-scale engine nozzles were tested at varying power cycles with the linear phased array setup parallel to the jet axis. The array consisted of 16 sparsely distributed microphones. The phased array microphone measurements were taken at a distance of 51.0 ft (15.5 m) from the jet axis, and the results were used to obtain relative overall sound pressure levels from one nozzle design to the other. The IR imaging system was used to acquire real-time dynamic thermal patterns of the exhaust jet from the nozzles tested. The IR camera measured the IR radiation from the nozzle exit to a distance of six fan diameters (X/D(sub FAN) = 6), along the jet plume axis. The images confirmed the expected jet plume mixing intensity, and the phased array results showed the differences in sound pressure level with respect to nozzle configurations. The results show the effects of changes in configurations to the exit nozzles on both the flows mixing patterns and radiant energy dissipation patterns. By comparing the results from these two measurements, a relationship between noise reduction and core/bypass flow mixing is demonstrated.

Agboola, Femi A.↗

NASA NTRS2007

Spacecraft Fire Detection: Smoke Properties and Transport in Low-Gravity

Results from a recent smoke particle size measurement experiment conducted on the International Space Station (ISS) are presented along with the results from a model of the transport of smoke in the ISS. The experimental results show that, for the materials tested, a substantial portion of the smoke particles are below 500 nm in diameter. The smoke transport model demonstrated that mixing dominates the smoke transport and that consequently detection times are longer than in normal gravity.

Urban, David L.↗

NASA NTRS1997

Structure of the Compressible Reacting Mixing Layer: A Linear Stability Analysis

Previous investigations have demonstrated that a mixing layer in compressible reacting conditions can develop two instability modes in addition to the more common central mode, which exists unaccompanied in incompressible non-reacting flows. These 'outer' modes were shown in the investigations of Planche and Reynolds to have a detrimental effect on mixing and combustion efficiency and therefore their presence has important consequences for applications of supersonic combustion. Results from a parametric study of the compressible reacting mixing layer's regime space using a linear stability technique will be discussed. The purpose is to develop a more complete understanding behind the effects of compressibility, heat release and the density, equivalence and velocity ratios on the amplification rate and structure of each instability mode.

Day, M. J.↗

NASA NTRS1972

A new method for the determination of the mixing ratio hydrogen to helium in the giant planets.

By using a numerical iterative method, it is demonstrated that the mixing ratio H2/He on the giant planets can be inferred from spectral measurements of the intensity emitted by these planets in the far infrared range. The method is successfully applied to synthetic spectra of Saturn computed from atmospheric thermal models. The effect of random and systematic measurement errors on the determination of the mixing ratio is also studied.

Gautier, D.↗

NASA NTRS1991

A geometric nonlinear degenerated shell element using a mixed formulation with independently assumed strain fields

A mixed formulation is chosen to overcome deficiencies of the standard displacement-based shell model. Element development is traced from the incremental variational principle on through to the final set of equilibrium equations. Particular attention is paid to developing specific guidelines for selecting the optimal set of strain parameters. A discussion of constraint index concepts and their predictive capability related to locking is included. Performance characteristics of the elements are assessed in a wide variety of linear and nonlinear plate/shell problems. Despite limiting the study to geometric nonlinear analysis, a substantial amount of additional insight concerning the finite element modeling of thin plate/shell structures is provided. For example, in nonlinear analysis, given the same mesh and load step size, mixed elements converge in fewer iterations than equivalent displacement-based models. It is also demonstrated that, in mixed formulations, lower order elements are preferred. Additionally, meshes used to obtain accurate linear solutions do not necessarily converge to the correct nonlinear solution. Finally, a new form of locking was identified associated with employing elements designed for biaxial bending in uniaxial bending applications.

Graf, Wiley E.↗

NASA NTRS1992

A new unsteady mixing model to predict NO(x) production during rapid mixing in a dual-stage combustor

An advanced gas turbine engine to power supersonic transport aircraft is currently under study. In addition to high combustion efficiency requirements, environmental concerns have placed stringent restrictions on the pollutant emissions from these engines. A dual-stage combustor with the potential for minimizing pollutants such as NO(x) emissions is undergoing experimental evaluation. A major technical issue in the design of this combustor is how to rapidly mix the hot, fuel-rich primary stage product with the secondary diluent air to obtain a fuel-lean mixture for combustion in the secondary stage. Numerical design studies using steady-state methods cannot account for the unsteady phenomena in the mixing region. Therefore, to evaluate the effect of unsteady mixing and combustion processes, a novel unsteady mixing model is demonstrated here. This model has been used in a stand-alone mode to study mixing and combustion in hydrogen-air nonpremixed jet flames. NO(x) production in these jet flames was also predicted. Comparison of the computed results with experimental data show good agreement thereby providing validation of the mixing model.

Menon, Suresh↗

NASA NTRS2023

Equilibrium Selection via Current Sheet Relaxation and Guide Field Amplification

Although there is a continuous spectrum of current sheet equilibria, how a particular equilibrium is selected by a given system remains a mystery. Yet, only a limited number of equilibrium solutions are used for analyses of magnetized plasma phenomena. Here we present the exact process of equilibrium selection, by analyzing the relaxation process of a disequilibrated current sheet under a finite guide field. It is shown via phase-space analyses and particle-in-cell simulations that the current sheet relaxes in such a way that the guide field is locally amplified, yielding a mixed equilibrium from the spectrum. Comparisons to spacecraft observations and solar wind current sheet statistics demonstrate that such mixed equilibria are ubiquitous and exist as underlying local structures in various physical environments.

Young-Dae Yoon↗

NASA NTRSDate not supplied

In-situ Lunar Launch and Landing Pad Construction with Regolith-Thermoset Polymer Composite Materials

Lunar launch and landing pads are necessary to mitigate risks to lander/ascent vehicles and surrounding surface assets from rocket plume ejected regolith. The current state of the art of landing and launching from the lunar surface is to land/launch on unprepared regolith surfaces. Though this has been a relatively successful approach, significant risks exist for the Artemis Program due to higher thrust levels leading to increased ejecta and cratering, presence of co-located assets in the ejecta path, and potential strict surface levelness requirements. Regolith-thermoset polymer composite materials were developed and evaluated for off Earth launch and landing pad applications. Performance under hot fire conditions was assessed for two simulated Starship lunar launch/landing environments, one targeting thermal conditions and the second targeting pressure conditions. Paver test articles were prepared at 20% and 11% polymer mass fractions. Sintered paver test articles were prepared with 20% polymer grouting filling the seams between pavers. Though significant erosion was experienced during the more extreme thermal testing conditions, all test articles successfully mitigated regolith ejecta from plume effects. A concept for preparing and emplacing the materials was developed and tested in laboratory conditions. The testing evaluated the feasibility of using twin and single screw extruder technology to mix, convey and deposit materials. Both the twin and single screw extruders were capable of processing and extruding the composite with a maximum of 90% mass fraction of regolith achieved by the twin screw extruder.A primary risk for application of regolith-thermoset polymer composites as lunar launch/landingpad is the mass of polymer required to be landed on the moon. Calculations were performed that show that a 100 m diameter, 0.025 m thick pad with polymer mass fraction of 15% will require a payload mass of 72 mt to the Lunar surface. This is below the planned Starship payload capacity to the lunar surface of 100 mt. The regolith-thermoset polymer composite based construction approach proved feasibility in three critical areas: performance under launch/landing conditions, demonstration of a mixing and depositing strategy, and fitting within the planned lunar payload capacity. It is recommended that materials and systems be developed to TRL 6 for a small-scale lunar demonstration of emplacement of a launch/landing pad via a CLPS mission to support Artemis Program roadmap gap closure activities.

ISRU↗

NASA NTRSDate not supplied

Improved Heat Transfer Prediction for High-Speed Flows over Blunt Bodies using Adaptive Mixed-Element Unstructured Grids

Aerothermodynamic prediction is important for the design and analysis of many aerospace vehicles. Computational Fluid Dynamics (CFD) tools used for these predictions commonly rely on structured shock-aligned grids due to the strong shocks exhibited at high speeds. This work details the incorporation of an improved HLLE++ scheme for both perfect gas and thermochemical nonequilibrium flows which robustly captures shock waves on both non-shock-aligned and shock-aligned grids. The HLLE++ scheme reduces the impact of eigenvalue limiting on flow solutions which is required for Roe's scheme for high Mach number flows. An adapted grid approach is also demonstrated using mixed-element unstructured grids to improve heat prediction. Thin prismatic boundary layers are used with tetrahedra in the farfield and for capturing shock waves. Various results are presented for hypersonic flows over blunt bodies including cylinders, spheres, and capsules.

CFD↗

NASA NTRSDate not supplied

Improved Heat Transfer Prediction for High-Speed Flows over Blunt Bodies using Adaptive Mixed-Element Unstructured Grids

CFD↗

NASA NTRS1972

Space LOX vent system

The research of the program to design and build a prototype vent system capable of exhausting only vapor to space from an all liquid or two-phase mixture of oxygen, while operating under low or zero-gravity conditions is reported. Work performed during the detail design phase of the program was concerned with the finalization of vent system performance, development of component specifications, solicitation of vendor bids, selection of components and overall system package design. The compact system preliminary design defined for the comparisons was reviewed in light of a desirability to demonstrate complete tank mixing at one-g. Also, performance of the system at low-g conditions with a full tank and maximum temperature stratification or maximum pressure rise between vent cycles was investigated. It was found that under these extreme conditions, not previously considered, that use of a larger pump mixer than previously defined would be desirable. In addition, to simplify ground testing with only a small weight penalty, the exchanger vent pressure was increased from 5 psia to 22 psia nominal. This resulted in less than a 0.2% increase in system weight.

Stark, J. A.↗

NASA NTRS1974

Feasibility study for the manufacture of zero gravity pharmaceuticles, immunological, and viral agents

The feasibility of extracting, isolating, purifying, separating, or preparing medical and biological products of high socio-economic value in space was studied. In particular, the study was designed to concentrate on the isolation or purification of virals, pharmaceutical and immunological agents by means of electrophoresis, as the Apollo 16 flight demonstrated that a mixed population of latex spheres (.2 and .8 microns) could be successfully separated by electrophoresis in space and without sedimentation with minimal convection. This prompted NASA scientists to look into the possibility of carrying out types of biochemical experiments that would utilize space for medical purposes.

Source record↗

NASA NTRS1974

Optical properties of the Apollo 15 deep core samples

The variations of albedo observed at different depths in a core tube show almost as large a range as occurs on the surface over the entire moon. Different regions in the core tube are very sharply separated from each other, demonstrating that little mixing had taken place in the deposition process or subsequently. A possible correlation between albedo and cosmic ray exposure is noted.

Gold, T.↗

NASA NTRS1989

Ozone conservation and entrainment in cumulus congestus

This study demonstrates that ozone mixing ratio is conserved during moist convection and can be used as a tracer for cloud entrainment studies. The approach is to apply mixing line analysis to pairs of liquid water potential temperature, total water mixing ratio, O3 and pseudo-equivalent potential temperature derived from aircraft penetrations of growing cumulus congestus. Conclusions about entrainment from the mixing diagrams employing O3 agree with those using thermodynamic quantities. Any disagreement uncovered deficiencies in the water substance measurement technique.

Pearson, R., Jr.↗

NASA NTRS1991

Origin of plagioclase-olivine inclusions in carbonaceous chondrites

The origin of plagioclase-olivine inclusions (POIs) from three CV chondrites and one ungrouped chondrite was investigated by examining the chemical, mineralogical, and isotopic characteristics of a group of POIs from these chondrites. Results of these analyses demonstrate that the mixing and the partial melting processes in these inclusions were superimposed on more ancient isotopically heterogeneous material. A comparison of the essential characteristics of POIs and CAIs suggests that the major processes leading to the formation of POIs (such as condensation, dust/gas fractionation, aggregation of chemically and isotopically disparate materials, and partial melting) are common to most CAIs and chondrules. A scenario for the origin of POIs is proposed, showing that the homogeneity of the final assemblage (whether a POI, a CAI, or a chondrite) is primarily a reflection of the thermal history rather than the nature of precursor materials.

Sheng, Y. J.↗

NASA NTRS2002

Turbulent Mixing of Primary and Secondary Flow Streams in a Rocket-Based Combined Cycle Engine

This viewgraph presentation gives an overview of the turbulent mixing of primary and secondary flow streams in a rocket-based combined cycle (RBCC) engine. A significant RBCC ejector mode database has been generated, detailing single and twin thruster configurations and global and local measurements. On-going analysis and correlation efforts include Marshall Space Flight Center computational fluid dynamics modeling and turbulent shear layer analysis. Potential follow-on activities include detailed measurements of air flow static pressure and velocity profiles, investigations into other thruster spacing configurations, performing a fundamental shear layer mixing study, and demonstrating single-shot Raman measurements.

Cramer, J. M.↗

NASA NTRS2003

Sea-Level Static Testing of the Penn State Two-Dimensional Rocket-Based Combined Cycle (RBCC) Testbed

The present results indicated that: 1.Significant RBCC ejector mode database has been generated for single and twin thruster configuration and for global and local measurements. 2. Ongoing analysis and correlation effort for MSFC CFD modeling and turbulent shear layer analysis was completed. 3. The potential follow-on activities are: detailed measurements of air flow static pressure and velocity profiles; investigation other thruster spacing configurations; performing fundamental shear layer mixing study; and demonstrating single-shot Raman measurements.

Cramer, J. M.↗

NASA NTRS2004

Potential Application of Anaerobic Extremophiles for Hydrogen Production

During substrate fermentation many anaerobes produce the hydrogen as a waste product, which often regulates the growth of the cultures as an inhibitor. In nature the hydrogen is usually removed from the ecosystem due to its physical properties or by consumption of hydrogen by secondary anaerobes, which sometimes behave as competitors for electron donors as is seen in the classical example in anaerobic microbial communities via the interaction between methanogens and sulfate- or sulfur- reducers. It was demonstrated previously on mixed cultures of anaerobes at neutral pH that bacterial hydrogen production could provide an alternative energy source. But at neutral pH the original cultures can easily be contaminated by methanogens, a most unpleasant side effect of these conditions is the development of pathogenic bacteria. In both cases the rate of hydrogen production was dramatically decreased since some part of the hydrogen was transformed to methane, and the cultivation of human pathogens on a global scale is very dangerous. In our laboratory, experiments with obligately alkaliphilic bacteria that excrete hydrogen as the end metabolic product were performed at different temperature regimes. Mesophilic and moderately thermophilic bacterial cultures have been studied and compared for the most effective hydrogen production. For high-mineralized media with pH 9.5-10.0 not many methanogens are known to exist. Furthermore, the development of pathogenic contaminant microorganisms is virtually impossible: carbonate-saturated solutions are used as antiseptics in medicine. Therefore the cultivation of alkaliphilic hydrogen producing bacteria could be considered as most safe process for global Scale industry in future. Here we present experimental data on the rates of hydrogen productivity for mesophilic, alkaliphilic, obligately anaerobic bacterium Spirocheta americana ASpG1 and moderately thermophilic, alkaliphilic, facultative anaerobe Anoxybacillus pushchinoensis K1 and discuss the potential implications for alternative energy sources.

Pikuta, Elena V.↗