Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobility database”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Urban Air Mobility Generation 1 Acoustic Database

An acoustic database has been generated in support of the NASA Revolutionary Vertical Lift Technology (RVLT) project, Technical Challenge (TC) TC.UAM.Noise.1, entitled “Urban Air Mobility Operational Fleet Noise Assessment.” As part of that TC, a periodic (approximately annual) development of an acoustic database will be performed based on the latest available information. The release of the first such database, namely, the “Gen 1 database for fleet noise assessments,” developed in support of RVLT milestone RVLT.23.02.L350, is the subject of this document.

urban air mobility↗

Adaptive search in mobile peer-to-peer databases

Information is stored in a plurality of mobile peers. The peers communicate in a peer to peer fashion, using a short-range wireless network. Occasionally, a peer initiates a search for information in the peer to peer network by issuing a query. Queries and pieces of information, called reports, are transmitted among peers that are within a transmission range. For each search additional peers are utilized, wherein these additional peers search and relay information on behalf of the originator of the search.

Wolfson, Ouri↗

A structural examination and collision cross section database for over 500 metabolites and xenobiotics using drift tube ion mobility spectrometry

The confident identification of metabolites and xenobiotics in biological and environmental studies is an analytical challenge due to their immense dynamic range, vast chemical space and structural diversity. Ion mobility spectrometry (IMS) is widely used for small molecule analyses since it can separate isomeric species and be easily coupled with front end separations and mass spectrometry for multidimensional characterizations. However, to date IMS metabolomic and exposomic studies have been limited by an inadequate number of accurate collision cross section (CCS) values for small molecules, causing features to be detected but not confidently identified. In this work, we utilized drift tube IMS (DTIMS) to directly measure CCS values for over 450 small molecules including primary metabolites, secondary metabolites and xenobiotics. Since DTIMS measurements do not need calibrates, they avoid calibration errors which can cause CCS accuracy problems and difficulties identifying structurally similar molecules. Furthermore, all measurements were performed in triplicate in both positive and negative polarities with nitrogen gas and seven different electric fields, so that relative standard deviations (RSD) could be assessed for each molecule and structural differences studied. The primary metabolites selected for the database are from key metabolism pathways such as glycolysis, the pentose phosphate pathway, and the tricarboxylic acid (TCA) cycle, while the secondary metabolites consist of classes such as terpenes and flavonoids, and the xenobiotics represent a range of molecules from antibiotics to polycyclic aromatic hydrocarbons. Different CCS trends were observed for several of the diverse small molecule classes, allowing insight in their separations and a possible why of classifying unknowns. This CCS database and structural information are freely available for download at http://panomics.pnnl.gov/metabolites/ with new molecules being added monthly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data Augmentation for Intelligent Contingency Management Using Generative Adversarial Neural Networks

Artificial intelligence (AI)-based techniques for intelligent contingency management (ICM) require that intelligent agents learn various aspects of system dynamics to create and execute contingencies. For high assurance contingency management, agents achieve the most compelling results through supervised or semi-supervised machine learning, for which agents require large datasets to learn the dynamics of the system. Unfortunately, data collection in aerospace applications can be costly, due to both time and resources. Presented work describes a framework for data augmentation of ICM databases containing training data for machine learning models. This framework populates the database with the outputs of generative adversarial network (GAN) models that were trained on flight data. Methods for evaluating the suitability of these models based on the equations of motion, as well as other physical constraints, are discussed. The paper demonstrates the utility of this database for training intelligent agents on the NASA T2 generic transport aircraft model and experimental vertical takeoff and landing (VTOL) simulation model.

Generative Machine Learning↗

Data Augmentation for Intelligent Contingency Management Using Generative Adversarial Neural Networks

Artificial intelligence (AI)-based techniques for intelligent contingency management (ICM) require that intelligent agents learn various aspects of system dynamics to create and execute contingencies. For high assurance contingency management, agents achieve the most compelling results through supervised or semi-supervised machine learning, for which agents require large datasets to learn the dynamics of the system. Unfortunately, data collection in aerospace applications can be costly, due to both time and resources. Presented work describes a framework for data augmentation of ICM databases containing training data for machine learning models. This framework populates the database with the outputs of generative adversarial network (GAN) models that were trained on flight data. Methods for evaluating the suitability of these models based on the equations of motion, as well as other physical constraints, are discussed. The paper demonstrates the utility of this database for training intelligent agents on the NASA T2 generic transport aircraft model and experimental vertical takeoff and landing (VTOL) simulation model.

Generative Machine Learning↗

Modular Software Interfaces for Revolutionary Flexibility in Space Operations

To make revolutionary improvements in exploration, space systems need to be flexible, realtime reconfigurable, and able to trade data transparently among themselves and mission operations. Onboard operations systems, space assembly coordination and EVA systems in exploration and construction all require real-time modular reconfigurability and data sharing. But NASA's current exploration systems are still largely legacies from hastily-developed, one-off Apollo-era practices. Today's rovers, vehicles, spacesuits, space stations, and instruments are not able to plug-and-play, Lego-like: into different combinations. Point-to-point dominates - individual suit to individual vehicle, individual instrument to rover. All are locally optimized, all unique, each of the data interfaces has been recoded for each possible combination. This will be an operations and maintenance nightmare in the much larger Project Constellation system of systems. This legacy approach does not scale to the hundreds of networked space components needed for space construction and for new, space-based approaches to Earth-Moon operations. By comparison, battlefield information management systems, which are considered critical to military force projection, have long since abandoned a point-to-point approach to systems integration. From a system-of-systems viewpoint, a clean-sheet redesign of the interfaces of all exploration systems is a necessary prerequisite before designing the interfaces of the individual exploration systems. Existing communications and Global Information Grid and middleware technologies are probably sufficient for command and control and information interfaces, with some hardware and time-delay modifications for space environments. NASA's future advanced space operations must also be information and data compatible with aerospace operations and surveillance systems being developed by other US Government agencies such as the Department of Homeland Security, Federal Aviation Administration and Department of Defense. This paper discusses fundamental system-of-systems infrastructure: approaches and architectures for modular plug-and-play software interfaces for revolutionary improvements in flexibility, modularity, robustness, ease of maintenance, reconfigurability, safety and productivity. Starting with middleware, databases, and mobile communications technologies, our technical challenges will be to apply these ideas to the requirements of constellations of space systems and to implement them initially on prototype space hardware. This is necessary to demonstrate an integrated information sharing architecture and services. It is a bottom-up approach, one that solves the problem of space operations data integration. Exploration demands uniform software mechanisms for application information interchange, and the corresponding uniformly available software services to enhance these mechanisms. We will examine the issues in plug-and-play, real-time-configurable systems, including common definition and management and tracking of data and information among many different space systems. Different field test approaches are discussed, including the use of the International Space Station and terrestrial analog mission operations at field sites.

Glass, Brian↗

Functional Mobility Testing: A Novel Method to Create Suit Design Requirements

This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.

England, Scott A.↗

An Interface Specification for Urban Air Mobility Performance Models to Support Air Traffic Management Research

Performance modeling of Urban Air Mobility vehicles in support of Air Traffic Management research poses new challenges. These aircraft often rely on a combination of fixed-wing and rotorcraft performance capabilities to enable a new and still-evolving concept of high-volume operations in densely populated areas. These characteristics lead to variability in performance model format and functionality, complicating model development and leading to difficulties for users integrating the models into their applications. This paper describes an interface specification for performance models that is intended to help address this issue. The interface aims to support the core functionality of performance models while also providing the necessary flexibility to both model developers and users. The specification describes the required model documentation, required inputs to the model, and required outputs from the model in general terms that are adaptable to most programming languages. The utilization of an appropriate interface specification will support the development of an Urban Air Mobility performance model database and help to improve interoperability of these models for a broad array of user applications.

Trajectory Prediction↗

An Interface Specification for Urban Air Mobility Performance Models to Support Air Traffic Management Research

Performance modeling of Urban Air Mobility vehicles in support of Air Traffic Management research poses new challenges. These aircraft often rely on a combination of fixed-wing and rotorcraft performance capabilities to enable a new and still-evolving concept of high-volume operations in densely populated areas. These characteristics lead to variability in performance model format and functionality, complicating model development and leading to difficulties for users integrating the models into their applications. This paper describes an interface specification for performance models that is intended to help address this issue. The interface aims to support the core functionality of performance models while also providing the necessary flexibility to both model developers and users. The specification describes the required model documentation, required inputs to the model, and required outputs from the model in general terms that are adaptable to most programming languages. The utilization of an appropriate interface specification will support the development of an Urban Air Mobility performance model database and help to improve interoperability of these models for a broad array of user applications.

Trajectory Prediction↗

Spherical Coordinate Systems for Streamlining Suited Mobility Analysis

Introduction: When describing human motion, biomechanists generally report joint angles in terms of Euler angle rotation sequences. However, there are known limitations in using this method to describe complex motions such as the shoulder joint during a baseball pitch. Euler angle notation uses a series of three rotations about an axis where each rotation is dependent upon the preceding rotation. As such, the Euler angles need to be regarded as a set to get accurate angle information. Unfortunately, it is often difficult to visualize and understand these complex motion representations. It has been shown that using a spherical coordinate system allows Anthropometry and Biomechanics Facility (ABF) personnel to increase their ability to transmit important human mobility data to engineers, in a format that is readily understandable and directly translatable to their design efforts. Objectives: The goal of this project was to use innovative analysis and visualization techniques to aid in the examination and comprehension of complex motions. Methods: This project consisted of a series of small sub‐projects, meant to validate and verify a new method before it was implemented in the ABF's data analysis practices. A mechanical test rig was built and tracked in 3D using an optical motion capture system. Its position and orientation were reported in both Euler and spherical reference systems. In the second phase of the project, the ABF estimated the error inherent in a spherical coordinate system, and evaluated how this error would vary within the reference frame. This stage also involved expanding a kinematic model of the shoulder to include the rest of the joints of the body. The third stage of the project involved creating visualization methods to assist in interpreting motion in a spherical frame. These visualization methods will be incorporated in a tool to evaluate a database of suited mobility data, which is currently in development. Results: Initial results demonstrated that a spherical coordinate system is helpful in describing and visualizing the motion of a space suit. The system is particularly useful in describing the motion of the shoulder, where multiple degrees of freedom can lead to very complex motion paths.

Benson, Elizabeth↗

Spherical Coordinate Systems for Streamlining Suited Mobility Analysis

When describing human motion, biomechanists generally report joint angles in terms of Euler angle rotation sequences. However, there are known limitations in using this method to describe complex motions such as the shoulder joint during a baseball pitch. Euler angle notation uses a series of three rotations about an axis where each rotation is dependent upon the preceding rotation. As such, the Euler angles need to be regarded as a set to get accurate angle information. Unfortunately, it is often difficult to visualize and understand these complex motion representations. One of our key functions is to help design engineers understand how a human will perform with new designs and all too often traditional use of Euler rotations becomes as much of a hindrance as a help. It is believed that using a spherical coordinate system will allow ABF personnel to more quickly and easily transmit important mobility data to engineers, in a format that is readily understandable and directly translatable to their design efforts. Objectives: The goal of this project is to establish new analysis and visualization techniques to aid in the examination and comprehension of complex motions. Methods: This project consisted of a series of small sub‐projects, meant to validate and verify the method before it was implemented in the ABF's data analysis practices. The first stage was a proof of concept, where a mechanical test rig was built and instrumented with an inclinometer, so that its angle from horizontal was known. The test rig was tracked in 3D using an optical motion capture system, and its position and orientation were reported in both Euler and spherical reference systems. The rig was meant to simulate flexion/extension, transverse rotation and abduction/adduction of the human shoulder, but without the variability inherent in human motion. In the second phase of the project, the ABF estimated the error inherent in a spherical coordinate system, and evaluated how this error would vary within the reference frame. This stage also involved expanding a kinematic model of the shoulder, to include the torso, knees, ankle, elbows, wrists and neck. Part of this update included adding a representation of 'roll' about an axis, for upper arm and lower leg rotations. The third stage of the project involved creating visualization methods to assist in interpreting motion in a spherical frame. This visualization method will be incorporated in a tool to evaluate a database of suited mobility data, which is currently in development.

Benson, Elizabeth↗

High-throughput approach for investigating interdiffusion in medium- and high-entropy alloys

Interdiffusion experiments are usually time-consuming and tedious since diffusion couples must be annealed at several temperatures for a long time. The efforts required to study interdiffusion in multicomponent alloys increase dramatically as multiple diffusion couples are required to cover broad composition ranges and determine the diffusivities of individual elements in different chemical environments. To circumvent this challenge, we present a high-throughput approach applicable to single-phase and compositionally complex alloys, which are assumed to approximate ideal solid solutions. Here, a simple diffusion-multiple experiment combined with a physically based kinetic model is proposed to efficiently determine the diffusion coefficients of the constituent elements in quaternary CrFeCoNi alloys. Compared with tracer diffusivities reported in the literature, the results, thus, obtained do not differ by more than a factor of 2 and were obtained from a single interdiffusion experiment. In contrast, the diffusivities simulated with commercial mobility and thermodynamic databases are strongly overestimated by a factor ranging from 1 to 16. Therefore, our approach enables high-throughput determination of diffusivities and can help in the design of alloys for high-temperature applications where diffusion plays a key role.

36 MATERIALS SCIENCE↗

A Magnetoencephalographic/Encephalographic (MEG/EEG) Brain-Computer Interface Driver for Interactive iOS Mobile Videogame Applications Utilizing the Hadoop Ecosystem, MongoDB, and Cassandra NoSQL Databases

In Phase I, we collected data on five subjects yielding over 90% positive performance in Magnetoencephalographic (MEG) mid-and post-movement activity. In addition, a driver was developed that substituted the actions of the Brain Computer Interface (BCI) as mouse button presses for real-time use in visual simulations. The process was interfaced to a flight visualization demonstration utilizing left or right brainwave thought movement, the user experiences, the aircraft turning in the chosen direction, or on iOS Mobile Warfighter Videogame application. The BCI’s data analytics of a subject’s MEG brain waves and flight visualization performance videogame analytics were stored and analyzed using the Hadoop Ecosystem as a quick retrieval data warehouse. In Phase II portion of the project involves the Emotiv Encephalographic (EEG) Wireless Brain–Computer interfaces (BCIs) allow for people to establish a novel communication channel between the human brain and a machine, in this case, an iOS Mobile Application(s). The EEG BCI utilizes advanced and novel machine learning algorithms, as well as the Spark Directed Acyclic Graph (DAG), Cassandra NoSQL database environment, and also the competitor NoSQL MongoDB database for housing BCI analytics of subject’s response and users’ intent illustrated for both MEG/EEG brainwave signal acquisition. The wireless EEG signals that were acquired from the OpenVibe and the Emotiv EPOC headset can be connected via Bluetooth to an iPhone utilizing a thin Client architecture. The use of NoSQL databases were chosen because of its schema-less architecture and Map Reduce computational paradigm algorithm for housing a user’s brain signals from each referencing sensor. Thus, in the near future, if multiple users are playing on an online network connection and an MEG/EEG sensor fails, or if the connection is lost from the smartphone and the webserver due to low battery power or failed data transmission, it will not nullify the NoSQL document-oriented (MongoDB) or column-oriented Cassandra databases. Additionally, NoSQL databases have fast querying and indexing methodologies, which are perfect for online game analytics and technology. In Phase II, we collected data on five MEG subjects, yielding over 90% positive performance on iOS Mobile Applications with Objective-C and C++, however on EEG signals utilized on three subjects with the Emotiv wireless headsets and (n < 10) subjects from the OpenVibe EEG database the Variational Bayesian Factor Analysis Algorithm (VBFA) yielded below 60% performance and we are currently pursuing extending the VBFA algorithm to work in the time-frequency domain referred to as VBFA-TF to enhance EEG performance in the near future. The novel usage of NoSQL databases, Cassandra and MongoDB, were the primary main enhancements of the BCI Phase II MEG/EEG brain signal data acquisition, queries, and rapid analytics, with MapReduce and Spark DAG demonstrating future implications for next generation biometric MEG/EEG NoSQL databases.

McClay, Wilbert↗

Applications of CALPHAD modeling and databases in advanced lightweight metallic materials

Here this paper presents an overview on the application of CALPHAD (CALculation of Phase Diagrams) methodology in the design and development of advanced lightweight metallic materials including magnesium, aluminum, titanium, aluminum-based metal matrix composites, and high entropy alloys. In this work, CALPHAD methodology has been established and summarized from the construction of databases describing thermodynamics, atomic mobility, kinetics, thermo-physical properties (such as viscosity) to the application of computational design of lightweight materials. The examples in this paper have demonstrated the effectiveness and capability of CALPHAD methodology in accelerating the design of advanced lightweight materials by optimizing the compositions and various heat-treatment conditions, modifying the evolution of microstructures during processing, and finally predicting the mechanical properties (e.g., yield strength and hardness) of the lightweight components. Although the examples are given in lightweight alloys for structural applications, the fundamental methodology and modeling principles are applicable to all materials and engineering applications. Thus, the future of the advanced material design will be strongly based on development of CALPHAD methodology such as the construction of reliable databases coupled with CALPHAD-based models for various applications.

36 MATERIALS SCIENCE↗

Assessment of Historic Trend in Mobility and Energy Use in India Transportation Sector Using Bottom-up Approach

Transportation mobility in India has increased significantly in the past decades. From 1970 to 2000, motorized mobility (passenger-km) has risen by 888%, compared with an 88% population growth (Singh,2006). This contributed to many energy and environmental issues, and an energy strategy incorporates efficiency improvement and other measures needs to be designed. Unfortunately, existing energy data do not provide information on driving forces behind energy use and sometime show large inconsistencies. Many previous studies address only a single transportation mode such as passenger road travel; did not include comprehensive data collection or analysis has yet been done, or lack detail on energy demand by each mode and fuel mix. The current study will fill a considerable gap in current efforts, develop a data base on all transport modes including passenger air and water, and freight in order to facilitate the development of energy scenarios and assess significance of technology potential in a global climate change model. An extensive literature review and data collection has been done to establish the database with breakdown of mobility, intensity, distance, and fuel mix of all transportation modes. Energy consumption was estimated and compared with aggregated transport consumption reported in IEA India transportation energy data. Different scenarios were estimated based on different assumptions on freight road mobility. Based on the bottom-up analysis, we estimated that the energy consumption from 1990 to 2000 increased at an annual growth rate of 7% for the mid-range road freight growth case and 12% for the high road freight growth case corresponding to the scenarios in mobility, while the IEA data only shows a 1.7% growth rate in those years.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Space Images for NASA JPL Android Version

This software addresses the demand for easily accessible NASA JPL images and videos by providing a user friendly and simple graphical user interface that can be run via the Android platform from any location where Internet connection is available. This app is complementary to the iPhone version of the application. A backend infrastructure stores, tracks, and retrieves space images from the JPL Photojournal and Institutional Communications Web server, and catalogs the information into a streamlined rating infrastructure. This system consists of four distinguishing components: image repository, database, server-side logic, and Android mobile application. The image repository contains images from various JPL flight projects. The database stores the image information as well as the user rating. The server-side logic retrieves the image information from the database and categorizes each image for display. The Android mobile application is an interfacing delivery system that retrieves the image information from the server for each Android mobile device user. Also created is a reporting and tracking system for charting and monitoring usage. Unlike other Android mobile image applications, this system uses the latest emerging technologies to produce image listings based directly on user input. This allows for countless combinations of images returned. The backend infrastructure uses industry-standard coding and database methods, enabling future software improvement and technology updates. The flexibility of the system design framework permits multiple levels of display possibilities and provides integration capabilities. Unique features of the software include image/video retrieval from a selected set of categories, image Web links that can be shared among e-mail users, sharing to Facebook/Twitter, marking as user's favorites, and image metadata searchable for instant results.

Nelson, Jon D.↗

Data Needs for Modeling Low-Temperature Non-Equilibrium Plasmas: The LXCat Project, History, Perspectives and a Tutorial

Technologies based on non-equilibrium, low-temperature plasmas are ubiquitous in today’s society. Plasma modeling plays an essential role in their understanding, development and optimization. An accurate description of electron and ion collisions with neutrals and their transport is required to correctly describe plasma properties as a function of external parameters. LXCat is an open-access, web-based platform for storing, exchanging and manipulating data needed for modeling the electron and ion components of non-equilibrium, low-temperature plasmas. The data types supported by LXCat are electron- and ion-scattering cross-sections with neutrals (total and differential), interaction potentials, oscillator strengths, and electron- and ion-swarm/transport parameters. Online tools allow users to identify and compare the data through plotting routines, and use the data to generate swarm parameters and reaction rates with the integrated electron Boltzmann solver. In this review, the historical evolution of the project and some perspectives on its future are discussed together with a tutorial review for using data from LXCat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Best practices mobile application for D and D KM-IT - 15712

The Deactivation and Decommissioning Knowledge Management Information Tool (D and D KM-IT) is the repository of useful information built specifically for D and D community. The knowledge provided by the D and D KM-IT is the experience and expertise gained by people within the field and fellow employees of the Department of Energy (DOE). This information has been the result of gathering, analyzing, storing, and sharing knowledge to help reduce time spent on discovering previously found data. In order to help in organizing all the data from all the professional contributors, the D and D KM-IT has been divided into 12 different modules. Each individual module pertains to a different area of information for users, such as vendor and technology information, collaboration tools, and even a hotline that contains problems posted by the users. Purpose: - Design and develop the module for the Best Practices on D and D KM-IT mobile platform deployed at https://m.dndkm.org; - The Best Practices mobile module should integrate with existing modules seamlessly; - Use the D and D KM-IT existing database to consume information for the mobile system. jQuery Mobile framework was used to develop Best Practices module for mobile devices. jQuery Mobile framework provides support for responsive web design (RWD). RWD allows adaptation of the layout and user interface of web sites and web apps to different device resolutions, screen densities, and views. UI design was implemented with three fundamental elements: CSS media queries, An adaptable grid, Flexible images and media. Advantages/benefits: - A responsive web design adapts to any-sized screen / resolution and orientation view; - ASP.NET compatible which allows the D and D KM-IT database to support all platforms accessing the system; - Navigating pages is more bandwidth efficient by refreshing data in small section with Ajax instead of reloading the entire page; - Multiple parts of a page can perform different tasks resulting in improved user's experience. Results: - Mobile system is accessible on compatible devices running Android, Apple, Blackberry, Palm, and Windows devices; - Best Practices searches through Characterization, Decontamination, Dismantlement, Material Disposition, and Worker Safety; - Keyword search is enabled for the best practices that are available on both the desktop and mobile systems - Documents are formatted into a PDF file format to ensure compatibility on any device. Conclusion: - Fully integrated with the desktop Best Practices module and displays documents that are uploaded on web platform; - Fast-loading with D and D KM-IT mobile system and downloadable documents; - Responsive design which gives the same user experience when either viewed on smart phone or tablet.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗