Search NASA⌕ Search

SEARCH · Search NASA

Results for “modal decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Development of an Experimental Rig for Investigation of Higher Order Modes in Ducts

Continued progress to reduce fan noise emission from high bypass ratio engine ducts in aircraft increasingly relies on accurate description of the sound propagation in the duct. A project has been undertaken at NASA Langley Research Center to investigate the propagation of higher order modes in ducts with flow. This is a two-pronged approach, including development of analytic models (the subject of a separate paper) and installation of a laboratory-quality test rig. The purposes of the rig are to validate the analytical models and to evaluate novel duct acoustic liner concepts, both passive and active. The dimensions of the experimental rig test section scale to between 25% and 50% of the aft bypass ducts of most modern engines. The duct is of rectangular cross section so as to provide flexibility to design and fabricate test duct liner samples. The test section can accommodate flow paths that are straight through or offset from inlet to discharge, the latter design allowing investigation of the effect of curvature on sound propagation and duct liner performance. The maximum air flow rate through the duct is Mach 0.3. Sound in the duct is generated by an array of 16 high-intensity acoustic drivers. The signals to the loudspeaker array are generated by a multi-input/multi-output feedforward control system that has been developed for this project. The sound is sampled by arrays of flush-mounted microphones and a modal decomposition is performed at the frequency of sound generation. The data acquisition system consists of two arrays of flush-mounted microphones, one upstream of the test section and one downstream. The data are used to determine parameters such as the overall insertion loss of the test section treatment as well as the effect of the treatment on a modal basis such as mode scattering. The methodology used for modal decomposition is described, as is a description of the mode generation control system. Data are presented which demonstrate the performance of the controller to generate the desired mode while suppressing all other cut on modes in the duct.

Gerhold, Carl H.↗

Vibro-acoustics for Space Station applications

An analytical procedure has been developed to study noise generation in a double wall and single wall cylindrical shell due to mechanical point loads. The objective of this study is to develop theoretical procedures for parametetric evaluation of noise generation andd noise transmission for the habitability modules of the proposed Space Station operation. The solutions of the governing acoustic-structural equations are obtained utilizing modal decomposition. The numerical results include modal frequencies, deflection response spectral densities and interior noise sound pressure levels.

Vaicaitis, R.↗

General parity-odd CMB bispectrum estimation

We develop a methodology for estimating parity-odd bispectra in the cosmic microwave background (CMB). This is achieved through the extension of the original separable modal methodology to parity-odd bispectrum domains (ℓ{sub 1}+ℓ{sub 2}+ℓ{sub 3} = odd). Through numerical tests of the parity-odd modal decomposition with some theoretical bispectrum templates, we verify that the parity-odd modal methodology can successfully reproduce the CMB bispectrum, without numerical instabilities. We also present simulated non-Gaussian maps produced by modal-decomposed parity-odd bispectra, and show the consistency with the exact results. Our new methodology is applicable to all types of parity-odd temperature and polarization bispectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Modal response and noise transmission of composite panels

Noise transmission through flat, angular, fiber-reinforced composite panels is investigated experimentally and analytically. A modal decomposition technique was used to obtain solutions to the governing differential equation of motion. Experimental modal analysis was performed in order to confirm the theoretical results. The test specimens were cross-ply and angle-ply composite panels made of various concentrations of fiberglass, graphite, or aramid fibers embedded in epoxy resion. The experimental results showed good agreement with the theoretical calculations. Graphs of the transmission loss characteristics of the different composite panels are provided.

Grosveld, F. W.↗

Multi-degree of Freedom Energy Analysis for Identification of Failure Risk in Structural Components Subjected to Random Vibration and Shock Loading

When designing or analyzing a mechanical system, energy quantities provide insight into the severity of shock and vibration environments; however, the energy methods in the literature do not address localized behavior because energy quantities are usually computed for an entire structure. The main objective of this paper is to show how to compute the energy in the components of a mechanical system. The motivation for this work is that most systems fail functionally due to component failure, not because the primary structure was overloaded, and the ability to easily compute the spatial distribution of energy helps identify failure sensitive components. The quantity of interest is input energy. That input energy can be decoupled modally is well known. What is less appreciated is that input energy can be computed at the component level exactly, using the component effective modal mass. We show the steady state input energy can be decomposed both spatially and modally and computed using input power spectra. A numerical example illustrates the spatial and modal decomposition of input energy and its utility in identifying components at risk of damage in random vibration and shock environments. Our work shows that the modal properties of the structure and the spectral content of the input must be considered together to assess damage risk. Because input energy includes absorbed energy as well as relative kinetic energy and dissipated energy, it is the recommended energy quantity for assessing the severity for both random vibration and shock environments on a structure.

42 ENGINEERING↗

Intelligent load pattern modeling and denoising using improved variational mode decomposition for various calendar periods

This paper proposes a novel approach to identify the load patterns considering calendar impact and denoising process, which advances the state of art of load identification and load forecasting to a more flexible and adaptive extent by revealing the correlation between load profile and the substantial influence factors. With the rapid development and the promising application of energy intemet and grid modernization, the accurate load modeling and forecasting especially by load pattern modeling (LPM) have become more and more critical to observe and estimate load profile so as to optimize the operation efficiency of the power grid. Traditional methods mostly focus on the static LPM itself which are unable to account the non-linear and highly dynamic load fluctuations in order to balance the demand of the power grid during various calendar period (VCP) scheduling. In this paper, a load pattern modeling method for power grid considering the impact of typical calendar effects is proposed using a combination of improved variational mode decomposition (IVMD) and deep belief network (DBN) algorithm. Firstly, an index of load curve curvature (LCC) is proposed to improve the selection of value K in the conventional VMD algorithm. The value K of the intrinsic modality is determined by adopting LCC to better quantify the average instantaneous frequency of the modal decomposition of the VMD and to reduce the elevated stochasticity of k. Secondly, an optimization formulation is developed based on adaptive segmented loop decomposition of the typical correlation coefficient to suppress the edge effect in VMD decomposition, which would enable the reconstructed curve to incorporate the variabilities from the initial data. Finally, the IVMD and DBN algorithms are jointly implemented to optimize the accuracy of VCP load pattern modeling curve regression. Numerical examples have been performed with the results proving that the proposed method significantly outperforms the state-of-art in reducing the modeling error of VCP load curve, improving the overall forecasting accuracy, and reducing load dispatching cost.

deep belief network↗

A blade loss response spectrum for flexible rotor systems

A shock spectrum procedure is developed to estimate the peak displacement response of linear flexible rotor-bearing systems sugjected to a step change in unbalance (i.e., a blade loss). A progressive and a retrograde response spectrum are established. These blade loss response spectra are expressed in a unique non-dimensional form and are functions of the modal damping ratio and the ratio of rotor spin speed to modal damped whirl speed. Modal decomposition using complex modes is utilized to make use of the unique feature of the spectra for the calculation of the peak blade loss displacement response of the rotor system. The procedure is applied to three example systems using several modal superposition strategies. The results of each are compared to true peak displacement obtained by a separate transient response program.

Nelson, H. D.↗

Algorithms for on-line parameter and mode shape estimation

Algorithms are presented for on-line parameter and mode-shape estimation. The approach used is based upon a modal decomposition of the dynamic response of the flexible structure and is designed to make use of the parallel processing features of modern minicomputers. Satisfactory performance of the parallel structure identification technique used can be achieved only when the approximation functions noted correspond to the natural modes of the flexible structure. The work summarized here presents a technique for estimating both mode shapes and modal parameters.

Thau, F. E.↗

Evaluation of Subgrid-scale Hydrometeor Transport Schemes using a High-resolution Cloud-resolving Model

Potential ways of parameterizing vertical turbulent fluxes of hydrometeors are examined using a high-resolution cloud-resolving model. The cloud-resolving model uses the Morrison microphysics scheme, which contains prognostic variables for rain, graupel, ice, and snow. A benchmark simulation with a horizontal grid spacing of 250 m of a deep convection case carried out to evaluate three different ways of parameterizing the turbulent vertical fluxes of hydrometeors: an eddy-diffusion approximation, a quadrant-based decomposition, and a scaling method that accounts for within-quadrant (subplume) correlations. Results show that the down-gradient nature of the eddy-diffusion approximation tends to transport mass away from concentrated regions, whereas the benchmark simulation indicates that the vertical transport tends to transport mass from below the level of maximum to aloft. Unlike the eddy-diffusion approach, the quadri-modal decomposition is able to capture the signs of the flux gradient but underestimates the magnitudes. The scaling approach is shown to perform the best by accounting for within-quadrant correlations, and improves the results for all hydrometeors except for snow. A sensitivity study is performed to examine how vertical transport may affect the microphysics of the hydrometeors. The vertical transport of each hydrometeor type is artificially suppressed in each test. Results from the sensitivity tests show that cloud-droplet-related processes are most sensitive to suppressed rain or graupel transport. In particular, suppressing rain or graupel transport has a strong impact on the production of snow and ice aloft. Lastly, a viable subgrid-scale hydrometeor transport scheme in an assumed probability density function parameterization is discussed.

cloud-resolving model↗

Seismic analysis of the large 70-meter antenna. Part 2: General dynamic response and a seismic safety check

An extensive dynamic analysis for the new JPL 70-meter antenna structure is presented. Analytical procedures are based on the normal mode decomposition which include dumping and special forcing functions. The dynamic response can be obtained for any arbitrarily selected point on the structure. A new computer program for computing the time-dependent, resultant structural displacement, summing the effects of all participating modes, was developed also. Program compatibility with natural frequency analysis output was verified. The program was applied to the JPL 70-meter antenna structure and the dynamic response for several specially selected points was computed. Seismic analysis of structures, a special application of the general dynamic analysis, is based also on the normal modal decomposition. Strength specification of the antenna, with respect to the earthquake excitation, is done by using the common response spectra. The results indicated basically a safe design under an assumed 5% or more damping coefficient. However, for the antenna located at Goldstone, with more active seismic environment, this study strongly recommends and experimental program that determines the true damping coefficient for a more reliable safety check.

Kiedron, K.↗

Restricted Modal Analysis Applied to Internal Annular Combustor Autospectra and Cross-Spectra Measurements

A treatment of the modal decomposition of the pressure field in a combustor as determined by two pressure time history measurements is developed herein. It is applied to a Pratt and Whitney PW4098 engine combustor over a range of operating conditions. For modes other than the plane wave the assumption is made that there are distinct frequency bands in which the individual modes, including the plane wave mode, overlap such that if circumferential mode m and circumferential mode m-1 are present then circumferential mode m-2 is not. In the analysis used herein at frequencies above the first cutoff mode frequency, only pairs of circumferential modes are individually present at each frequency. Consequently, this is a restricted modal analysis. As part of the analysis one specifies mode cut-on frequencies. This creates a set of frequencies that each mode spans. One finding was the successful use of the same modal span frequencies over a range of operating conditions for this particular engine. This suggests that for this case the cut-on frequencies are in proximity at each operating condition. Consequently, the combustion noise spectrum related to the circumferential modes might not change much with operating condition.

Miles, Jeffrey Hilton↗

Restricted Acoustic Modal Analysis Applied to Internal Combustor Spectra and Cross-Spectra Measurements

A treatment of the modal decomposition of the pressure field in a combustor as determined by two Kulite pressure measurements is developed herein. It is applied to a Pratt & Whitney PW4098 engine combustor over a range of operating conditions. For modes other than the plane wave the new part of the treatment is the assumption that there are distinct frequency bands in which the individual modes, including the plane wave mode, overlap such that if circumferential mode m and circumferential mode m-1 are present than circumferential mode m 2 is not. Consequently, in the analysis used herein at frequencies above the first cut-off mode frequency, only pairs of circumferential modes are individually present at each frequency. Consequently, this is a restricted modal analysis. A new result is that the successful use of the same modal span frequencies over a range of operating conditions for this particular engine suggests that the temperature, T, and the velocity, v, of the flow at each operating condition are related by c(sup 2)-v(sup 2) = a constant where c is the speed of sound.

Miles, Jeffrey Hilton↗

Temporal dynamics of large-scale structures for turbulent Rayleigh–Bénard convection in a moderate aspect-ratio cylinder

We investigate the spatial organization and temporal dynamics of large-scale, coherent structures in turbulent Rayleigh–Bénard convection via direct numerical simulation of a 6.3 aspect-ratio cylinder with Rayleigh and Prandtl numbers of 9.6×10 7 and 6.7, respectively. Fourier modal decomposition is performed to investigate the structural organization of the coherent turbulent motions by analysing the length scales, time scales and the underlying dynamical processes that are ultimately responsible for the large-scale structure formation and evolution. We observe a high level of rotational symmetry in the large-scale structure in this study and that the structure is well described by the first four azimuthal Fourier modes. Two different large-scale organizations are observed during the duration of the simulation and these patterns are dominated spatially and energetically by azimuthal Fourier modes with frequencies of 2 and 3. Studies of the transition between these two large-scale patterns, radial and vertical variations in the azimuthal energy spectra, as well as the spatial and modal variations in the system's correlation time are conducted. Rotational dynamics are observed for individual Fourier modes and the global structure with strong similarities to the dynamics that have been reported for unit aspect-ratio domains in prior works. It is shown that the large-scale structures have very long correlation time scales, on the order of hundreds to thousands of free-fall time units, and that they are the primary source for a horizontal inhomogeneity within the system that can be observed during a finite, but a very long-time simulation or experiment.

42 ENGINEERING↗

Verifying and assessing the performance of the perturbation strategy in polynomial chaos ensemble forecasts of the circulation in the Gulf of Mexico

Here we present an analysis of two recent efforts aimed at quantifying the uncertainties in a 30-day HYbrid Coordinate Ocean Model forecast of the circulation in the Gulf of Mexico, with particular emphasis on the separation of Loop Current Eddy Franklin, using Polynomial Chaos methods. The analysis herein explores whether the model perturbations lead to realistic representation of the uncertainty in the Gulf Circulation. Comparisons of model output with Sea Surface Height and current mooring data show that the observational data generally falls within the envelope of the ensemble and that the modal decomposition delivers “realistic” perturbations in the Loop Current region. We use information theory metrics to quantify the information gain and the computational trade-offs between different wind and initial conditions perturbation modes. The relative entropy measures indicate that two modes for initial condition perturbations are enough, in our model configuration, to represent the uncertainty in the Loop Current region; while two modes for wind forcing perturbations are necessary in order to estimate the uncertainty in the coastal zone. The ensemble statistics are then explored using the Polynomial Chaos surrogate and the newly developed contour boxplot methods.

54 ENVIRONMENTAL SCIENCES↗

Equation‐Free Surrogate Modeling of Geophysical Flows at the Intersection of Machine Learning and Data Assimilation

Abstract There is a growing interest in developing data‐driven reduced‐order models for atmospheric and oceanic flows that are trained on data obtained either from high‐resolution simulations or satellite observations. The data‐driven models are non‐intrusive in nature and offer significant computational savings compared to large‐scale numerical models. These low‐dimensional models can be utilized to reduce the computational burden of generating forecasts and estimating model uncertainty without losing the key information needed for data assimilation (DA) to produce accurate state estimates. This paper aims at exploring an equation‐free surrogate modeling approach at the intersection of machine learning and DA in Earth system modeling. With this objective, we introduce an end‐to‐end non‐intrusive reduced‐order modeling (NIROM) framework equipped with contributions in modal decomposition, time series prediction, optimal sensor placement, and sequential DA. Specifically, we use proper orthogonal decomposition (POD) to identify the dominant structures of the flow, and a long short‐term memory network to model the dynamics of the POD modes. The NIROM is integrated within the deterministic ensemble Kalman filter (DEnKF) to incorporate sparse and noisy observations at optimal sensor locations obtained through QR pivoting. The feasibility and the benefit of the proposed framework are demonstrated for the NOAA Optimum Interpolation Sea Surface Temperature (SST) V2 data set. Our results indicate that the NIROM is stable for long‐term forecasting and can model dynamics of SST with a reasonable level of accuracy. Furthermore, the prediction accuracy of the NIROM gets improved by almost one order of magnitude by the DEnKF algorithm.

Pawar, Suraj↗

Phonon transport properties of two-dimensional electride Ca 2 N—A first-principles study

We investigate phonon transport in dicalcium nitride (Ca 2 N), an electride with two-dimensional confined electron layers, using first-principles density functional theory and the phonon Boltzmann transport equation. The in-plane (κ[100]) and out-of-plane (κ[001]) lattice thermal conductivities at 300 K are found to be 11.72 W m -1 K -1 and 2.50 W m -1 K -1 , respectively. Spectral analysis of lattice thermal conductivity shows that ~85% of $κ_{[100]}$ and $κ_{[001]}$ is accumulated by phonons with frequencies less than 5.5 THz and 2.5 THz, respectively. Modal decomposition of lattice thermal conductivity further reveals that the optical phonons contribute to ~68% and ~55% of overall $κ_{[100]}$ and $κ_{[001]}$, respectively. Phonon dispersion suggests that the large optical phonon contribution is a result of low frequency optical phonons with high group velocities and the lack of phonon bandgap between the acoustic and optical phonon branches. We find that the optical phonons with frequencies below ~5.5 THz have similar three-phonon phase space and scattering rates as acoustic phonons. Comparison of the contributions from emission and absorption processes reveals that the three-phonon phase space and scattering rates of phonons—optical or acoustic—with frequencies below 5.5 THz are largely dominated by absorption processes. We conclude that the large contribution to lattice thermal conductivity by optical phonons is due to the presence of multiple low frequency optical phonon modes with high group velocities and similar phase space and scattering rates as the acoustic phonons. This study provides the frequency and temperature dependent lattice thermal conductivity and insights into phonon transport in Ca 2 N, both of which have important implications for the development of Ca 2 N based devices.

36 MATERIALS SCIENCE↗

Dynamics retrieval from stochastically weighted incomplete data by low-pass spectral analysis

Time-resolved serial femtosecond crystallography (TR-SFX) provides access to protein dynamics on sub-picosecond timescales, and with atomic resolution. Due to the nature of the experiment, these datasets are often highly incomplete and the measured diffracted intensities are affected by partiality. To tackle these issues, one established procedure is that of splitting the data into time bins, and averaging the multiple measurements of equivalent reflections within each bin. This binning and averaging often involve a loss of information. Here, we propose an alternative approach, which we call low-pass spectral analysis (LPSA). In this method, the data are projected onto the subspace defined by a set of trigonometric functions, with frequencies up to a certain cutoff. This approach attenuates undesirable high-frequency features and facilitates retrieving the underlying dynamics. A time-lagged embedding step can be included prior to subspace projection to improve the stability of the results with respect to the parameters involved. Subsequent modal decomposition allows to produce a low-rank description of the system's evolution. Using a synthetic time-evolving model with incomplete and partial observations, we analyze the LPSA results in terms of quality of the retrieved signal, as a function of the parameters involved. We compare the performance of LPSA to that of a range of other sophisticated data analysis techniques. We show that LPSA allows to achieve excellent dynamics reconstruction at modest computational cost. Finally, we demonstrate the superiority of dynamics retrieval by LPSA compared to time binning and merging, which is, to date, the most commonly used method to extract dynamical information from TR-SFX data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physics-constrained, low-dimensional models for magnetohydrodynamics: First-principles and data-driven approaches

Plasmas are highly nonlinear and multiscale, motivating a hierarchy of models to understand and describe their behavior. However, there is a scarcity of plasma models of lower fidelity than magnetohydrodynamics (MHD), although these reduced models hold promise for understanding key physical mechanisms, efficient computation, and real-time optimization and control. Galerkin models, obtained by projection of the MHD equations onto a truncated modal basis, and data-driven models, obtained by modern machine learning and system identification, can furnish this gap in the lower levels of the model hierarchy. This work develops a reduced-order modeling framework for compressible plasmas, leveraging decades of progress in projection-based and data-driven modeling of fluids. We begin by formalizing projection-based model reduction for nonlinear MHD systems. To avoid separate modal decompositions for the magnetic, velocity, and pressure fields, we introduce an energy inner product to synthesize all of the fields into a dimensionally consistent, reduced-order basis. Next, we obtain an analytic model by Galerkin projection of the Hall-MHD equations onto these modes. We illustrate how global conservation laws constrain the model parameters, revealing symmetries that can be enforced in data-driven models, directly connecting these models to the underlying physics. We demonstrate the effectiveness of this approach on data from high-fidelity numerical simulations of a three-dimensional spheromak experiment. Finally, this manuscript builds a bridge to the extensive Galerkin literature in fluid mechanics and facilitates future principled development of projection-based and data-driven models for plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗