Global analysis of seismic refraction measurements.
Seismic refraction measurements, computing statistics for depth to Moho, crustal thickness and upper mantle velocity for geographical and geological provinces
EARTH CRUST↗
SEARCH · Search NASA
Results for “moho”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quantitative mass distribution models for Mare Orientale
Six theoretical models for the mass distribution of Mare Orientale were tested using five gravity profiles extracted from radio-tracking data of orbiting spacecraft. The models with surface mass and moho relief produced the best results. Although there is a mascon-type anomaly in the central maria region, Mare Orientale is a large negative gravity anomaly. This is produced primarily by the empty ring basin. Had the basin filled with maria material it seems likely that it would have produced a mascon such as those presently existing in flooded frontside circular basins.
Sjogren, W. L.↗
Structure, composition and thermal state of the crust in Brazil
Aeromagnetic survey data of the Minas Gerais areas were analyzed and compared with MAGSAT anomaly data. Initially the data set was used to determine the thickness of the magnetized crust. The value obtained is in agreement with crustal models derived from deep seismic sounding and gravity data, indicating that the bottom of the magnetized layer occurs close to the Moho transition. An analysis of the long wavelength pattern indicates that the anomalies form a series of lineations along the magnetic E-W. These are shown to be the result of attenuation. On the MAGSAT total intensity map localized anomalies are superimposed onto an anomaly background formed by alternating positive and negative patches. Implementation and testing of analysis software for MAGSAT data are also discussed.
Pacca, I. I. G.↗
The deep structure of lunar basins - Implications for basin formation and modification
Models for the crustal structure in the vicinity of nine impact basins, from an inversion of gravity and topographic data from the lunar nearside are presented. The models display a low-density nonmare crustal layer and a mare basalt layer, both of variable thicknesses. Assuming that topography in mare areas is isostatically compensated before the emplacement of mare basalts and that compensation of mare basalt units may be neglected, a decomposition of the gravity anomaly into contributions from Moho relief and mare fill is permitted. Minimum values for mare basalt thicknesses are obtained but because mare basalts and mantle material are similar in density, the thicknesses of the nonmare crust are estimated. An important constraint is the crustal thickness inferred from the Apollo 12 and 14 landing sites from seismic observations. The crustal thickness model indicates that the crust is thinner beneath each of the major nearside basins than in surrounding areas. New bounds on the volume of material ejected from each basin are derived. The geological implications of structural differences among basins for the processes of basin formation and modification are evaluated as functions of time on the moon.
Bratt, S. R.↗
Lithospheric and crustal thinning
In rift zones, both the crust and the lithosphere get thinner. The amplitude and the mechanism of these two thinning situations are different. The lithospheric thinning is a thermal phenomenon produced by an asthenospherical uprising under the rift zone. In some regions its amplitude can exceed 200%. This is observed under the Baikal rift where the crust is directly underlaid by the mantellic asthenosphere. The presence of hot material under rift zones induces a large negative gravity anomaly. A low seismic velocity zone linked to this thermal anomaly is also observed. During the rifting, the magmatic chambers get progressively closer from the ground surface. Simultaneously, the Moho reflector is found at shallow depth under rift zones. This crustal thinning does not exceed 50%. Tectonic stresses and vertical movements result from the two competing effects of the lithospheric and crustal thinning. On the one hand, the deep thermal anomaly induces a large doming and is associated with extensive deviatoric stresses. On the other hand, the crustal thinning involves the formation of a central valley. This subsidence is increased by the sediment loading. The purpose here is to quantify these two phenomena in order to explain the morphological and thermal evolution of rift zones.
Moretti, I.↗
Heat and extension at mid- and lower crustal levels of the Rio Grande rift
The process by which large amounts (50 to 200 percent) of crustal extension are produced was concisely described by W. Hamilton in 1982 and 1983. More recently, England, Sawyer, P. Morgan and others have moved toward quantifying models of lithospheric thinning by incorporating laboratory and theoretical data on rock rheology as a function of composition, temperature, and strain rate. Hamilton's description identifies three main crustal layers, each with a distinctive mechanical behavior; brittle fracturing and rotation in the upper crust, discontinuous ductile flow in the middle crust and laminar ductile flow in the lower crust. The temperature and composition dependent brittle-ductile transition essentially defines the diffuse boundary between upper and middle crust. It was concluded that the heat responsible for the highly ductile nature of the lower crust and the lensoidal and magma body structures at mid-crustal depths in the rift was infused into the crust by relatively modest ( 10 percent by mass) magmatic upwelling (feeder dikes) from Moho levels. Seismic velocity-versus-depth data, supported by gravity modeling and the fact that volumes of rift related volcanics are relatively modest ( 6000 cubic km) for the Rio Grande system, all imply velocities and densities too small to be consistent with a massive, composite, mafic intrusion in the lower crust.
Olsen, K. H.↗
A dynamical model of lithosphere extension and sedimentary basin formation
The effect of convection-induced stresses at the base of the continental lithosphere on surface and extensional deviatoric stresses is investigated. The biaxial strain in the continental lithosphere is controlled by power law creep in the upper and lower crust, brittle failure, and the Dorn plasticity law. The relationship between the lithosphere stress distribution and Moho temperatures is examined. The extension factors, basin subsidence, heat flow, and sediment loading of the lithosphere are studied.
Houseman, G.↗
Cenozoic thermal, mechanical and tectonic evolution of the Rio Grande rift
Two areas of New Mexico which exhibit complex but similar Cenozoic histories of extensional tectonism are analyzed. The first study area is the Basin and Range province and southern Rio Gande rift in southern New Mexico; the second study area is the central Rio Grande rift in central and northern New Mexico, the southern San Luis basin, the Espanola basin, and the Albuquerque basin. Two phases of extension were identified: the first phase which began in mid-Oligocene was characterized by local high-strain extension events, low-angle faulting, and the development of broad, shallow basins, all indicating an approximately NE-SW + or - 25 deg extension direction; the later phase which occurred primarily in the late Miocene, was characterized by synchronous, high-angle faulting, resulting in large vertical strains which produced the modern Rio Grande rift morphology. Extension direction was approximately E-W. Geotherms were estimated and lithospheric strength curves were calculated for these two phases of extension. A high geotherm was deduced for the early phase resulting in a shallow crustal brittle transition, and insignificant mantle strength. The lithosphere subsequently cooled, resulting in a significant zone of mantle strength beneath the Moho. It is concluded that the interrelationship among regional and local prerifting, synrifting, and postrifting events in the Rio Grande rift attests to the fact that the rifting (in the region studied) should be considered in the context of other geologic events.
Morgan, P.↗
Three-dimensional P and S wave velocity structures of southern Peru and their tectonic implications
Arrival times of compressional and shear (S) waves from microearthquakes recorded in 1981 by an 18-station regional array are used to study the three-dimensional velocity structure of the crust and upper mantle of the central Andes. The data suggest a crustal thickness of about 40 km beneath the coast, increasing to about 70 km beneath the Cordillera Occidental. The inverse correlation between the dip in the Moho and the dip of the slab may indicate a broad-scale causal relation between the two. S wave velocities in the mantle between 70 and 130 km depth above the 30-degree dipping slab are low, possibly indicating the presence of a partially melted asthenosphere that may be responsible for the magmatic activity recorded in southern Peru.
Cunningham, Paul S.↗
Recycling of lower continental crust through foundering of cumulates from contaminated mafic intrusions
A mechanism is presented for recycling of lower continental material back into the mantle. Picritic magmas, possible parental to volumious continental volcanics such as the Karoo and Deccan, became trapped at the Moho, where they interacted with and become contaminated by lower crustal materials. Upon crystallization, the magmas differentiated into lower ultramafic cumulate zones and upper gabbroic-anorthositic zones. The ultramafic cumulates are denser than underlying mantle and sink, carrying lower crustal components as trapped liquid, as xenoliths or rafts, and as constituents of cumulate minerals. This model provides a potentially significant crust-mantle differentiation mechanism, and may also represent a contributing factor in crustal recycling, possibly important in producing some OIB reservoirs.
Arndt, Nicholas T.↗
U-Pb zircon geochronology and evolution of some Adirondack meta-igneous rocks
An update was presented of the recent U-Pb isotope geochronology and models for evolution of some of the meta-igneous rocks of the Adirondacks, New York. Uranium-lead zircon data from charnockites and mangerites and on baddeleyite from anorthosite suggest that the emplacement of these rocks into a stable crust took place in the range 1160 to 1130 Ma. Granulite facies metamorphism was approximately 1050 Ma as indicated by metamorphic zircon and sphene ages of the anorthosite and by development of magmatitic alaskitic gneiss. The concentric isotherms that are observed in this area are due to later doming. However, an older contact metamorphic aureole associated with anorthosite intrusion is observed where wollastonite develops in metacarbonates. Zenoliths found in the anorthosite indicate a metamorphic event prior to anorthosite emplacement. The most probable mechanism for anorthosite genesis is thought to be ponding of gabbroic magmas at the Moho. The emplacement of the anorogenic anorthosite-mangerite-charnockite suite was apparently bracketed by compressional orogenies.
Mclelland, J. M.↗
Mapping in the Oman ophiolite using enhanced Landsat Thematic Mapper images
The level of apparent lithological discrimination possible with Landsat TM images in the Oman are discussed. It is found that by using parts of the short-wavelength IR spectrum, the discrimination revealed by the TM data is sufficiently uniform throughout the Oman ophiolite to produce lithological maps at 1:100,000 scale. Decorrelation stretching of the data produces images in which allows for the recognition of variations in gabbro composition, the identification of small acidic, gabbroic, and ultramafic intrusions, the discrimation of the uppermost mantle from the deeper mantle, the precise location of the Moho, and the delineation of gossans and areas subject to choritic-epidotic alteration.
Abrams, M. J.↗
The isostatic state of Mead crater
We have analyzed high-resolution Magellan Doppler tracking data over Mead crater, using both line-of-sight and spherical harmonic methods, and have found a negative gravity anomaly of about 4-5 mgal (at spacecraft altitude, 182 km). This is consistent with no isostatic compensation of the present topography; the uncertainty in the analysis allows perhaps as much as 30% compensation at shallow dpeths (approximately 25 km). This is similar to observations of large craters on Earth, which are not generally compensated, but contrasts with at least some lunar basins which are inferred to have large Moho uplifts and corresponding positive Bouguer anomalies. An uncompensated load of this size requires a lithosphere with an effective elastic lithosphere thickness greater than 30 km. In order for the crust-mantle boundary not to have participated in the deformation associated with the collapse of the transient cavity during the creation of the crater, the yield strength near the top of the mantle must have been significantly higher on Earth and Venus than on the Moon at the time of basin formation. This might be due to increased strength against frictional sliding at the higher confining pressures within the larger planets. Alternatively, the thinner crusts of Earth and Venus compared to that of the Moon may result in higher creep strength of the upper mantle at shallower depths.
Banerdt, W. B.↗
The Lunar Crustal Thickness from Analysis of the Lunar Prospector Gravity and Clementine Topography Datasets
The Lunar Prospector spacecraft has mapped the gravity field of the Moon to a level of resolution never achieved before, and a spherical harmonic representation to degree and order 100 is available. When combined with the topography dataset produced by the Clementine mission, the resulting Bouguer anomaly map is interpreted to model the thickness of the lunar crust. Such models are crucial to understanding the lunar thermal history and the formation of geological features such as mascon basins, several more of which have been newly discovered from this dataset. A two-layer planetary model was used to compute the variations of the depth to the lunar Moho. The thickness values ranged from near 0 to 120 km. There is significant agreement with previous work using the Clementine gravitational field data with differences in specific locations such as South Pole-Aitken Basin, for example.
Asmar, S.↗
Crustal Structure of the Iceland Region from Spectrally Correlated Free-air and Terrain Gravity Data
Seismic refraction studies have provided critical, but spatially restricted constraints on the structure of the Icelandic crust. To obtain a more comprehensive regional view of this tectonically complicated area, we spectrally correlated free-air gravity anomalies against computed gravity effects of the terrain for a crustal thickness model that also conforms to regional seismic and thermal constraints. Our regional crustal thickness estimates suggest thickened crust extends up to 500 km on either side of the Greenland-Scotland Ridge with the Iceland-Faeroe Ridge crust being less extended and on average 3-5 km thinner than the crust of the Greenland-Iceland Ridge. Crustal thickness estimates for Iceland range from 25-35 km in conformity with seismic predictions of a cooler, thicker crust. However, the deepening of our gravity-inferred Moho relative to seismic estimates at the thermal plume and rift zones of Iceland suggests partial melting. The amount of partial melting may range from about 8% beneath the rift zones to perhaps 20% above the plume core where mantle temperatures may be 200-400 C above normal. Beneath Iceland, areally limited regions of partial melting may also be compositionally and mechanically layered
Leftwich, T. E.↗
Crustal Structure of the Iceland Region from Spectrally Correlated Free-air and Terrain Gravity Data
Seismic refraction studies have provided critical, but spatially restricted constraints on the structure of the Icelandic crust. To obtain a more comprehensive regional view of this tectonically complicated area, we spectrally correlated free-air gravity anomalies against computed gravity effects of the terrain for a crustal thickness model that also conforms to regional seismic and thermal constraints. Our regional crustal thickness estimates suggest thickened crust extends up to 500 km on either side of the Greenland-Scotland Ridge with the Iceland-Faeroe Ridge crust being less extended and on average 3-5 km thinner than the crust of the Greenland-Iceland Ridge. Crustal thickness estimates for Iceland range from 25-35 km in conformity with seismic predictions of a cooler, thicker crust. However, the deepening of our gravity-inferred Moho relative to seismic estimates at the thermal plume and rift zones of Iceland suggests partial melting. The amount of partial melting may range from about 8% beneath the rift zones to perhaps 20% above the plume core where mantle temperatures may be 200-400 C above normal. Beneath Iceland, areally limited regions of partial melting may also be compositionally and mechanically layered and intruded. The mantle plume appears to be centered at (64.6 deg N, 17.4 deg W) near the Vatnajokull Glacier and the central Icelandic neovolcanic zones.
Leftwich, T. E.↗
Crustal structure of Mars from gravity and topography
Mars Orbiter Laser Altimeter (MOLA) topography and gravity models from 5 years of Mars Global Surveyor (MGS) spacecraft tracking provide a window into the structure of the Martian crust and upper mantle. We apply a finite-amplitude terrain correction assuming uniform crustal density and additional corrections for the anomalous densities of the polar caps, the major volcanos, and the hydrostatic flattening of the core. A nonlinear inversion for Moho relief yields a crustal thickness model that obeys a plausible power law and resolves features as small as 300 km wavelength. On the basis of petrological and geophysical constraints, we invoke a mantle density contrast of 600 kg m-3; with this assumption, the Isidis and Hellas gravity anomalies constrain the global mean crustal thickness to be >45 km. The crust is characterized by a degree 1 structure that is several times larger than any higher degree harmonic component, representing the geophysical manifestation of the planet's hemispheric dichotomy. It corresponds to a distinction between modal crustal thicknesses of 32 km and 58 km in the northern and southern hemispheres, respectively. The Tharsis rise and Hellas annulus represent the strongest components in the degree 2 crustal thickness structure. A uniform highland crustal thickness suggests a single mechanism for its formation, with subsequent modification by the Hellas impact, erosion, and the volcanic construction of Tharsis. The largest surviving lowland impact, Utopia, post-dated formation of the crustal dichotomy. Its crustal structure is preserved, making it unlikely that the northern crust was subsequently thinned by internal processes.
Neumann, G. A.↗
Local Lunar Gravity Field Analysis over the South Pole-aitken Basin from SELENE Farside Tracking Data
We present a method with which we determined the local lunar gravity field model over the South Pole-Aitken (SPA) basin on the farside of the Moon by estimating adjustments to a global lunar gravity field model using SELENE tracking data. Our adjustments are expressed in localized functions concentrated over the SPA region in a spherical cap with a radius of 45deg centered at (191.1 deg E, 53.2 deg S), and the resolution is equivalent to a 150th degree and order spherical harmonics expansion. The new solution over SPA was used in several applications of geophysical analysis. It shows an increased correlation with high-resolution lunar topography in the frequency band l = 40-70, and admittance values are slightly different and more leveled when compared to other, global gravity field models using the same data. The adjustments expressed in free-air anomalies and differences in Bouguer anomalies between the local solution and the a priori global solution correlate with topographic surface features. The Moho structure beneath the SPA basin is slightly modified in our solution, most notably at the southern rim of the Apollo basin and around the Zeeman crater
Lunar Gravity↗