Search NASA⌕ Search

SEARCH · Search NASA

Results for “molten state functionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

DFT-guided flux synthesis of a family of layered titanates crystallizing in the lepidocrocite structure type

K 0.72 Fe 0.72 Ti 1.28 O 4 , a layered mixed-metal oxide belonging to the lepidocrocite structure type, was grown out of a molten KCl-KF mixture at 800 °C. The compound crystallizes in orthorhombic space group Cmcm and exhibits two-dimensional layers, composed of mixed Fe/Ti octahedra, separated by K ions that occupy the interlayer layer space and maintain charge balance. The targeted flux synthesis of the Ni, Cu, and Zn analogs was carried out after density functional theory (DFT) calculations predicted their formation to be energetically favorable, yielding K 0.77 Ni 0.38 Ti 1.62 O 4 , K 0.77 Cu 0.38 Ti 1.62 O 4 , and K 0.73 Zn 0.36 Ti 1.64 O 4 . Finally, all four compositions can be prepared via conventional solid-state technique by mixing and heating stoichiometric amounts of KNO 3 , appropriate transition metal oxide precursors, and TiO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tailoring the Electronic Structures and Spectral Properties of ZnO with Irradiation Defects Generated Under Intense Electronic Excitation: A Combined Experimental and DFT Approach

Here, the relationship between the composition of the internal defect states, spectral properties, and correlated electronic structures of wurtzite zinc oxide (ZnO) crystals under 645 MeV Xe 35+ irradiation is systematically investigated, employing experimental characterizations combined with first-principle calculations. Based on the ion irradiation-induced thermal expansion and relaxation processes, the high concentration of vacancy/interstitial defects produced from the transient disordered phase in molten track states trigger photoelectric changes, as follows: i) the generation of internal defect states effectively reduces the intrinsic bandgap (3.25 eV → 2.66 eV); ii) a large number of defective active sites inhibits the recombination between electron–hole pairs, causing dark conductance and photoconductance to increase with increasing damage levels until optimal fluence is achieved. Based on the density functional theory (DFT) with the GGA + U (GGA = generalized gradient approximation) method, the defective models associated with the different electronic structures, density of states, formation energy, and the nature of the chemical bonding are established. The narrowing of the bandgap observed experimentally and the enhancement of carrier concentration originating from the internal electron defect states are qualitatively verified, therefore laying the foundation for designing future nanoscale photoelectronic devices and microelectronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Molecular structure and catalytic promotional effect of Mn on supported Na 2 WO 4 /SiO 2 catalysts for oxidative coupling of methane (OCM) reaction

The structure and promotional effect of Mn in supported Mn-Na 2 WO 4 /SiO 2 catalysts for the oxidative coupling of methane (OCM) reaction has been debated for a longtime in the literature. In the current investigation, with the aid of multiple in-situ characterization studies, we show that the freshly calcined supported 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst possesses crystalline Na 2 WO 4 , Mn 2 O 3 and SiO 2 (cristobalite phase) along with surface MnO x and Na-WO x sites at low temperature and oxidizing environments. Under the OCM reaction environment (T>800°C), the crystalline Na 2 WO 4 phase melts and Mn 2 O 3 phase reduces. In contrast, the surface MnO x and Na-WO x sites exhibit excellent thermal and chemical stability. Exposure of the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst to the OCM reaction environment redisperses the molten Na 2 WO 4 phase on the SiO 2 support to form new surface WO x sites. Interestingly, the stable MnO x species interacts with both molten Na 2 WO 4 phase and surface Na-WO x sites during OCM reaction. Controlled transient kinetic experiments in TAP and detailed steady state OCM fixed-bed reaction studies reveal the role and promotional effect of Mn in the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst. The W-oxides (both molten Na 2 WO 4 and surface Na-WO x sites) are the active sites for the catalytic OCM reaction and the MnO x species only function as promoters. The promotion of MnO x strongly depends on the gas phase O 2 partial pressure and the MnO x species act as mediators for oxygen exchange between the gas phase molecular O 2 and catalyst lattice oxygen. In conclusion, the temperature dependent MnO x promotion reveals that the MnO x species selectively promote the molten Na 2 WO 4 phase at lower reaction temperature and the surface Na-WO x sites at higher temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Novel Electrowinning Reactor for the Energy-Efficient, Low- Cost Production of Rare Earth Metals

This project developed a novel neodymium (Nd) electrowinning reactor for energy-efficient electrowinning of Nd metal. Throughout this project we have developed an alternative chloride based molten salt electrolysis process. Our process lowers the specific electrical energy consumption compared to the state of the art, while producing reusable chlorine gas and eliminating direct CO2 and PFC emissions. Facilities required for implementing the project were setup and designs were finalized, and a standard operating procedure for safe operation of high temperature electrolysis cells was written. The electrowinning reactor was designed and constructed. Electrolysis experiments confirmed the ability to reproducibly electrowin Nd metal on a Mo cathode. The current efficiency for Nd electrowinning was measured as a function of applied current density in the presence of the separator. Successful electrowinning of Nd sponge at high current densities (200 mA/cm2 and above) at a current efficiency >80% was demonstrated using multiple techniques. Stable Nd electrowinning up to 10h at 250 mA/cm2 was demonstrated. All of these design advancements were used to develop a techno-economic and life cycle assessment model that demonstrated that our process could be operated at cost of less than $0.20/kg-Nd (~30% lower compared to state of the art when comparing electrolysis energy cost) with a >20% total reduction in global warming potential compared to the state of the art while generating no direct CO2 or perfluorocarbon emissions.

42 ENGINEERING↗
DOE OSTI2021

X-ray absorption spectroscopy of trivalent Eu, Gd, Tb, and Dy chlorides and oxychlorides

Growing interest in next generation molten salt nuclear reactors necessitates a fundamental understanding of the chemical and physico-chemical properties of fission products, including elements of the lanthanide series. In this study, we probed coordination environment of Eu, Gd, Tb, and Dy in their chloride salts with both laboratory and synchrotron scale X-ray absorption spectroscopy (XAS). Here the aerobic melting was carried out with LnCl 3 ·nH 2 O, where Ln is Eu, Gd, Tb, and Dy, and yielded predominant formation of oxychlorides (LnOCl), that was confirmed by extended X-ray absorption fine structure (EXAFS) analysis and X-ray diffraction (XRD). Density functional theory (DFT) and time-dependent density functional theory (TDDFT) computations were performed to obtain ground state structures, lattice parameters, and to simulate L 3 -edge XANES (X-ray absorption near edge structure) spectra of the LnCl 3 ·nH 2 O and LnOCl. A blue shift, initially predicted by our calculations, was also observed for the experimental Ln L 3 -edge XANES spectra of the hydrated trichlorides vs oxychlorides, highlighting the power of combining the predictive ability of theory with experiment to elucidate the properties of the compounds of interest. The blue shift is indicative of structural stabilization of LnCl 3 ·nH 2 O due to higher symmetry compared with LnOCl. To the best of knowledge, this is a first study providing the framework for fundamental insights into the structure of Ln trichlorides and oxychlorides in support of future characterization of lanthanides in the molten salt environment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sodium, Silver and Lithium-Ion Conducting β''-Alumina + YSZ Composites, Ionic Conductivity and Stability

Na-β''-alumina (Na 2 O.~6Al 2 O 3 ) is known to be an excellent sodium ion conductor in battery and sensor applications. In this study we report fabrication of Na- β''-alumina + YSZ dual phase composite to mitigate moisture and CO 2 corrosion that otherwise can lead to degradation in pure Na-β''-alumina conductor. Subsequently, we heat-treated the samples in molten AgNO 3 and LiNO3 to respectively form Ag-β''-alumina + YSZ and Li-β''-alumina + YSZ to investigate their potential applications in silver- and lithium-ion solid state batteries. Ion exchange fronts were captured via SEM and EDS techniques. Their ionic conductivities were measured using electrochemical impedance spectroscopy. Both ion exchange rates and ionic conductivities of these composite ionic conductors were firstly reported here and measured as a function of ion exchange time and temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The structure of molten calcium ferrite under various redox conditions

Laser-heated melts based on the 43CaO–57Fe 2 O 3-x eutectic, close to the calcium ferrite (CF) composition, were measured with high-energy X-ray diffraction using aerodynamic levitation over a range of redox states controlled by CO/CO 2 gas atmospheres. The iron–oxygen coordination number was found to rise from 4.4 ± 0.3 at 15% Fe 3+ to 5.3 ± 0.3 at 87% Fe 3+ . Empirical potential structure refinement modelling was used to obtain the ferric and ferrous partial pair distribution functions. It was found that the Fe 2+ iron–oxygen coordination number is consistently approximately 10% higher in CF than in pure iron oxide, while Fe 3+ is essentially identical in all but the most oxygen-rich environments (where it is higher in CF compared with FeO x ). The model also shows calcium octahedra to be the dominant species across all redox environments, although the population of CaO 7 increases with the availability of oxygen at the expense of CaO 4 and CaO 5 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Impact of Nd ions on the chemical kinetic behavior of radiolytic transients in molten LiCl-KCl-NdCl3 salt mixtures

Pyrochemical reprocessing technologies can be used to recover valuable materials from used nuclear fuel (UNF), such as uranium. However, other critical materials, such as fission product neodymium, are challenging to recover from molten chloride eutectic mixtures (LiCl-KCl) due to the presence of multivalent states (Nd2+/Nd3+), disproportionation reactions, and re-dissolution in the molten chloride salt. Understanding, predicting, and controlling these processes is further complicated by the presence of ionizing radiation fields, for which little is known on the interaction of neodymium ions with the radiolytic transients (es– and Cl2.–) in molten LiCl-KCl salt mixtures. Here, chemical kinetics, from integrated electron pulse irradiation and transient absorption spectroscopy, are presented for the reaction of Nd3+ ions with es– and Cl2.– as a function of temperature (400–600 ?).

36 - MATERIALS SCIENCE↗
DOE OSTI2026

Molten Halide Salt Surface Tension: Methods and Correlations

Here, this paper reviews various methods for studying surface tension and their applicability to fluoride and chloride molten salt systems, including a comparison of benefits and drawbacks. Such a comparison aids in experiment design based on desired factors such as scale, accuracy, and repeatability. A detailed review is presented for existing literature data regarding the surface tension of molten fluoride and chloride salts. These reference data were compiled and analyzed to determine cross-validated correlation equations for several alkali and alkaline earth fluoride and chloride salts as functions of temperature. These correlations are necessary for reliable multiphysics modeling approaches as well as accurate design and analysis of multiphase molten salt phenomena such as gas sparging and bubble formation/transport. This analysis supports the development of the thermophysical arm of the Molten Salt Thermal Properties Database (MSTDB-TP) managed by Oak Ridge National Laboratory.

Chloride↗
DOE OSTI2025

Development and Demonstration of a Prototype Molten Salt Sampling System

Molten salt reactors (MSRs) offer potential operability and safety advantages when compared to commercial light water reactors (LWRs). However, operating experience with MSRs is sparse in comparison to what exists for LWRs. Further, the chemical and isotopic composition of the fuel and/or coolant salt is dynamic and difficult to characterize continuously, posing potential safety, operability, and safeguards unknowns that need to be addressed. A molten salt sampling system (MSSS) is regarded as a necessary subsystem within first generation MSRs used to obtain samples of salt for chemical and isotopic analysis in support of the need to monitor and control salt composition during operation. The MSSS is being developed using the Safety-in-Design (SiD) methodology, which incorporates incremental integration of safety analysis into the design process. The MSSS conceptual design emerging from the application of the early stages of the SiD methodology consists of a sample collection system and its housing, a freeze port, and inert gas control and delivery systems. This article describes the prototypes developed to test the functions of these MSSS subsystems, presents the results of testing in both dry and molten salt environments (including reliability data collection performed in accordance with the principles of SiD and the development of a semiquantitative fault tree model), and summarizes the opportunities for future design and testing enhancements based on the results of prototype testing.

molten salt reactor↗
DOE OSTI2024

Is the Local Ion Density Sufficient to Drive NaCl Nucleation from the Melt and Aqueous Solution?

Even though nucleation is ubiquitous in different science and engineering problems, investigating nucleation is extremely difficult due to the complicated ranges of time and length scales involved. In this work, we simulate NaCl nucleation in both molten and aqueous environments using enhanced sampling of all-atom molecular dynamics with deep-learning-based estimation of reaction coordinates. By incorporating various structural order parameters and learning the reaction coordinate as a function thereof, we achieve significantly improved sampling relative to traditional ad hoc descriptions of what drives nucleation, particularly in an aqueous medium. Our results reveal a one-step nucleation mechanism in both environments, with reaction coordinate analysis highlighting the importance of local ion density in distinguishing solid and liquid states. However, although fluctuations in the local ion density are necessary to drive nucleation, they are not sufficient. Our analysis shows that near the transition states, descriptors such as enthalpy and local structure become crucial. Furthermore, our protocol proposed here enables robust nucleation analysis and phase sampling and could offer insights into nucleation mechanisms for generic small molecules in different environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Design Optimization of a Criticality Experiment for the Molten Chloride Reactor Experiment Facility

Neutronics simulations of Molten Chloride Fast Reactors have quantifiable biases that arise from nuclear data, modeling choices, or numerical methods. The multiphysics nature of molten salt reactors makes it challenging to disentangle neutronics modeling biases from biases originating from other physical phenomena. In comparison to a mock-up reactor, criticality experiments can specifically assess the neutronics modeling bias while limiting multiphysics effects. The criticality experiment must be neutronically representative of the full-scale reactor to be valuable. Here, in this paper, we describe the design of a criticality experiment to validate only the neutronics of TerraPower’s Molten Chloride Reactor Experiment (MCRE) and its criticality safety upset scenarios. The proposed experiment uses different chlorine-containing materials to maximize its similarity to the MCRE. The design process uses a constrained Bayesian optimization algorithm to investigate different objective functions that use covariance information for 35 Cl nuclear data. The experiments could reduce the nuclear data–induced uncertainty in k eff of the MCRE from 2161 to 886 pcm. They would also increase the upper subcritical limit of the MCRE criticality safety upset scenario from 0.94101 to 0.94476 when using the WHISPER analysis framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Fundamental flow characterization for LiCl–KCl molten salt natural circulation closed loop

Molten salt flow characterization presents numerous challenges due to the hostile environments that cause corrosion and erosion of instrumentation and structural components. To support future molten salt flow characterization under natural convection conditions, a LiCl–KCl eutectic molten salt loop was designed and constructed. The primary objective of this loop is to facilitate natural convection as the principal cooling mechanism, enabling insights into the physics behind natural convection in closed loops and serving as a baseline for loop dimensional and non-dimensional analyses. Here, this study summarizes the fundamental functions employed for flow characterization and introduces a model to estimate flow rate when intrusive instrumentation is unavailable. The approach relies solely on structural surface measurements to avoid flow disturbances. Furthermore, a comprehensive thermal–hydraulic analysis is included to deepen understanding of the system’s behavior.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Understanding the Electronic Behavior of f-Element Intermetallics

Due to their partially filled f-orbitals, lanthanide and actinide intermetallic materials exhibit intriguing electronic, structural, and magnetic properties. These materials provide a unique platform to explore exotic magnetic and quantum phenomena that arise from their strongly correlated f-electrons, offering insights into f-electron behavior. Incorporating light elements such as boron and carbon can significantly impact the electronic, chemical, and physical properties of these materials, with varying influence between lanthanides and actinides due to the more localized f-electrons in lanthanides. In this work, lanthanide-based intermetallic single crystals containing light atoms were synthesized using the molten metal flux growth method. In this method, one or more low-melting metals such as aluminum, gallium, tin, and bismuth are used in excess as the reaction medium. This solution-state approach allows for lower reaction temperatures compared to solid-state reactions and enables the isolation of kinetic products rather than thermodynamically stable compounds. The synthesized crystals were analyzed using an extensive array of analytical and computational characterization techniques, including single crystal X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, magnetization measurements, and density functional theory calculations. These analyses provided detailed insights into the structural and magnetic properties of the synthesized materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2025

Solid structure of Li 2 BeF 4 (FLiBe) from room temperature to melting studied by neutron and X-ray diffraction

Molten fluoride salts such as Li 2 BeF 4 (FLiBe) are used in molten salt reactors, fluoride-salt-cooled high-temperature reactors and fusion reactors as a fuel solvent, coolant and/or tritium breeding medium. In engineered systems that use molten salt, solid-state material will be present during melting and freezing scenarios, and therefore the temperature-dependent properties of the solid and solid/liquid phase transition merit investigation. To observe the behavior of the solid state of Li 2 BeF 4 from room temperature to melting, this work used neutron and X-ray diffraction to measure the changes in the lattice parameters and volume of the crystalline unit cell and compared the results with prior low-temperature data for solid Li 2 BeF 4 . From neutron diffraction data it is also possible to identify anisotropy: centimetre-scaled crystals align preferentially with the a axes parallel to the direction of freezing front propagation, and the c axes expand 54% more than the a axes. This work provides the lattice constants as a function of temperature, quantifies the thermal expansion, and determines the equation describing the change in density for solid Li 2 BeF 4 from room temperature to 459°C to be ρ solid (kg m −3 ) = 2182 (3) − 0.115 (2) T (°C) and the volume expansion upon melting to be less than 5%. This density changes depending on molecular weight and enrichment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Field-Dependent Ionic Conductivities from Generalized Fluctuation-Dissipation Relations

We derive a relationship for the electric field dependent ionic conductivity in terms of fluctuations of time integrated microscopic variables. We demonstrate this formalism with molecular dynamics simulations of solutions of differing ionic strength with implicit solvent conditions and molten salts. These calculations are aided by a novel nonequilibrium statistical reweighting scheme that allows for the conductivity to be computed as a continuous function of the applied field. In strong electrolytes, we find the fluctuations of the ionic current are Gaussian, and subsequently, the conductivity is constant with applied field. In weaker electrolytes and molten salts, we find the fluctuations of the ionic current are strongly non-Gaussian, and the conductivity increases with applied field. Furthermore, this nonlinear behavior, known phenomenologically for dilute electrolytes as the Onsager-Wien effect, is general and results from the suppression of ionic correlations at large applied fields, as we elucidate through both dynamic and static correlations within nonequilibrium steady states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Luminescent Zn 2 GeO 4 :Mn 2+ Nanoparticles with High Quantum Yield for Salivary Protein Detection

Zinc germanate doped with Mn 2+ (Zn 2 GeO 4 :Mn 2+ ) is known to be a green luminescence phosphor with many applications in biosensing and bioimaging. This study presents a simple method for creating small size Zn 2 GeO 4 :Mn 2+ nanoparticles using a combination of the coprecipitation–molten salt synthesis method. These nanoparticles exhibit bright green luminescence under UV excitation. After surface functionalization, these nanoparticles were then used to develop a fluorescence resonance energy transfer (FRET)-based immunoassay. This immunoassay shows a detection range of 5–20 ng/mL of C-reactive protein (CRP), which suggests its potential for simple solution CRP detection and broader applications in protein biosensing.

biosensing↗
DOE OSTI2025

Uncertainty Analyses of Molten Salt Property Measurements

Thermophysical and thermochemical property values of molten salts and associated uncertainties are used by reactor developers to evaluate reactor performance and model accident scenarios. These activities support fuel qualification objectives by demonstrating that fundamental safety functions (e.g., limit the release of radioactive materials, remove heat from the reactor, and control reactivity) can be performed effectively in a variety of conditions over the operating life of the reactor. Fuel qualification activities are still in the development phase due to a lack of reliable property data for salt mixtures being considered for use in molten salt reactors (MSR).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗