Search NASA⌕ Search

SEARCH · Search NASA

Results for “multimode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Advanced tracking and data relay experiments study: Multimode transponder experiment equipment

Plans and implementation concepts were developed for a series of experiments utilizing a Multimode Transponder mounted in an aircraft working either through a spacecraft or directly with a ground station which would simulate a TDRSS user working through the TDRSS. The purpose of the experiments is to determine the best modulation and encoding techniques for combating RFI in discreet bands. The experiments also determine the feasibility and accuracy of range and range rate measurements with the various modulation and encoding techniques. An analysis of the Multimode Transponder and ground support equipment is presented, and the additional equipment required to perform the experiments described above is determined.

Cnossen, R. S.↗
NASA NTRS1977

Multimodal far-field acoustic radiation pattern: An approximate equation

The far-field sound radiation theory for a circular duct was studied for both single mode and multimodal inputs. The investigation was intended to develop a method to determine the acoustic power produced by turbofans as a function of mode cut-off ratio. With reasonable simplifying assumptions the single mode radiation pattern was shown to be reducible to a function of mode cut-off ratio only. With modal cut-off ratio as the dominant variable, multimodal radiation patterns can be reduced to a simple explicit expression. This approximate expression provides excellent agreement with an exact calculation of the sound radiation pattern using equal acoustic power per mode.

Rice, E. J.↗
NASA NTRS1977

Multimodal far-field acoustic radiation pattern - An approximate equation

The far-field sound radiation theory for a circular duct was studied for both single mode and multimodal inputs. The investigation was intended to develop a method to determine the acoustic power produced by turbofans as a function of mode cut-off ratio. This information is essential for the design of acoustic suppressors in engine ducts. With reasonable simplifying assumptions the single mode radiation pattern was shown to be reducible to a function of mode cut-off ratio only (modal indices removed). With modal cut-off ratio as the dominant variable, multimodal radiation patterns can be reduced to a simple explicit expression. This approximate expression provides excellent agreement with an exact calculation of the sound radiation pattern using equal acoustic power per mode. Radiation patterns for cases other than equal modal power are presented using the approximate radiation equation. An approximate expression for the duct termination losses as a function of cut-off ratio is also included.

Rice, E. J.↗
NASA NTRS1977

Far-field multimodal acoustic radiation directivity

Approximate equations for the far field acoustic radiation patterns in the forward quadrant from a flanged circular duct were compared with exact equations for both single and multimodal excitations. The single mode comparison showed good agreement between the exact and approximate equations for the principal lobes of higher radial order modes. For lower and especially for zero radial order modes, there was some error in the angular location and decibel level of principal lobe peak pressure obtained from the approximate equation. Some agreement of sidelobes was also observed although the approximate equation was not intended to simulate the sidelobes. The multimodal approximate summation equations consisting only of a simple function of directivity angle and an acoustic power biasing function were checked against the exact equations for several distributions of modal power and showed excellent agreement with exact equations for all cases. Although many modes contribute to the final level and shape of the directivity curve, the major contributions appear to come from the higher radial order modes.

Saule, A. V.↗
NASA NTRS1991

Visually guided control of movement in the context of multimodal stimulation

Flight simulation has been almost exclusively concerned with simulating the motions of the aircraft. Physically distinct subsystems are often combined to simulate the varieties of aircraft motion. Visual display systems simulate the motion of the aircraft relative to remote objects and surfaces (e.g., other aircraft and the terrain). 'Motion platform' simulators recreate aircraft motion relative to the gravitoinertial vector (i.e., correlated rotation and tilt as opposed to the 'coordinated turn' in flight). 'Control loaders' attempt to simulate the resistance of the aerodynamic medium to aircraft motion. However, there are few operational systems that attempt to simulate the motion of the pilot relative to the aircraft and the gravitoinertial vector. The design and use of all simulators is limited by poor understanding of postural control in the aircraft and its effect on the perception and control of flight. Analysis of the perception and control of flight (real or simulated) must consider that: (1) the pilot is not rigidly attached to the aircraft; and (2) the pilot actively monitors and adjusts body orientation and configuration in the aircraft. It is argued that this more complete approach to flight simulation requires that multimodal perception be considered as the rule rather than the exception. Moreover, the necessity of multimodal perception is revealed by emphasizing the complementarity rather than the redundancy among perceptual systems. Finally, an outline is presented for an experiment to be conducted at NASA ARC. The experiment explicitly considers possible consequences of coordination between postural and vehicular control.

Riccio, Gary E.↗
NASA NTRS1992

Reconfigurable optical interconnection network for multimode optical fiber sensor arrays

A single-source, single-detector architecture has been developed to implement a reconfigurable optical interconnection network multimode optical fiber sensor arrays. The network was realized by integrating LiNbO3 electrooptic (EO) gratings working at the Raman Na regime and a massive fan-out waveguide hologram (WH) working at the Bragg regime onto a multimode glass waveguide. The glass waveguide utilized the whole substrate as a guiding medium. A 1-to-59 massive waveguide fan-out was demonstrated using a WH operating at 514 nm. Measured diffraction efficiency of 59 percent was experimentally confirmed. Reconfigurability of the interconnection was carried out by generating an EO grating through an externally applied electric field. Unlike conventional single-mode integrated optical devices, the guided mode demonstrated has an azimuthal symmetry in mode profile which is the same as that of a fiber mode.

Chen, R. T.↗
NASA NTRS1993

Conversion of the proprietary ROLM (tm) inter-node link from multimode to singlemode operation

Many NASA centers have selected ROLM(TM) Computerized Branch Exchanges (CBX's) as their standard telephone exchange. The ROLM 9751 CBX Model 70 with ROLM software release 9005 can inter-communicate as a 'multi-node' system over a multimode fiber optic link of 450 to 6,000 meters. Singlemode fiber installations are not supported by ROLM. Two New Mexico-based NASA satellite ground terminals were already connected via a 6 kilometer singlemode fiber optic link. The ROLM Inter-Node Link (INL) was converted from multimode LED transmitters to singlemode laser transmitters and two ROLM CBX systems were interconnected using the modified INL. On activation, the system operated normally and has done so for six months. System testing indicates sufficient margin to drive 45 kilometers of singlemode fiber, an important benefit for widely separated facilities.

Boucher, Larry↗
NASA NTRS1994

Multimodal correlation and intraoperative matching of virtual models in neurosurgery

The multimodal correlation between different diagnostic exams, the intraoperative calibration of pointing tools and the correlation of the patient's virtual models with the patient himself, are some examples, taken from the biomedical field, of a unique problem: determine the relationship linking representation of the same object in different reference frames. Several methods have been developed in order to determine this relationship, among them, the surface matching method is one that gives the patient minimum discomfort and the errors occurring are compatible with the required precision. The surface matching method has been successfully applied to the multimodal correlation of diagnostic exams such as CT, MR, PET and SPECT. Algorithms for automatic segmentation of diagnostic images have been developed to extract the reference surfaces from the diagnostic exams, whereas the surface of the patient's skull has been monitored, in our approach, by means of a laser sensor mounted on the end effector of an industrial robot. An integrated system for virtual planning and real time execution of surgical procedures has been realized.

Ceresole, Enrico↗
NASA NTRS2009

Multimodal Friction Ignition Tester

The multimodal friction ignition tester (MFIT) is a testbed for experiments on the thermal and mechanical effects of friction on material specimens in pressurized, oxygen-rich atmospheres. In simplest terms, a test involves recording sensory data while rubbing two specimens against each other at a controlled normal force, with either a random stroke or a sinusoidal stroke having controlled amplitude and frequency. The term multimodal in the full name of the apparatus refers to a capability for imposing any combination of widely ranging values of the atmospheric pressure, atmospheric oxygen content, stroke length, stroke frequency, and normal force. The MFIT was designed especially for studying the tendency toward heating and combustion of nonmetallic composite materials and the fretting of metals subjected to dynamic (vibrational) friction forces in the presence of liquid oxygen or pressurized gaseous oxygen test conditions approximating conditions expected to be encountered in proposed composite material oxygen tanks aboard aircraft and spacecraft in flight. The MFIT includes a stainless-steel pressure vessel capable of retaining the required test atmosphere. Mounted atop the vessel is a pneumatic cylinder containing a piston for exerting the specified normal force between the two specimens. Through a shaft seal, the piston shaft extends downward into the vessel. One of the specimens is mounted on a block, denoted the pressure block, at the lower end of the piston shaft. This specimen is pressed down against the other specimen, which is mounted in a recess in another block, denoted the slip block, that can be moved horizontally but not vertically. The slip block is driven in reciprocating horizontal motion by an electrodynamic vibration exciter outside the pressure vessel. The armature of the electrodynamic exciter is connected to the slip block via a horizontal shaft that extends into the pressure vessel via a second shaft seal. The reciprocating horizontal motion can be chosen to be random with a flat spectrum over the frequency range of 10 Hz to 1 kHz, or to be sinusoidal at any peak-to-peak amplitude up to 0.8 in. (.2 cm) and fixed or varying frequency up to 1 kHz. The temperatures of the specimen and of the vessel are measured by thermocouples. A digital video camera mounted outside the pressure vessel is aimed into the vessel through a sapphire window, with its focus fixed on the interface between the two specimens. A position transducer monitors the displacement of the pneumatic-cylinder shaft. The pressure in the vessel is also monitored. During a test, the output of the video camera, the temperatures, and the pneumatic-shaft displacement are monitored and recorded. The test is continued for a predetermined amount of time (typically, 10 minutes) or until either (1) the output of the position transducer shows a sudden change indicative of degradation of either or both specimens, (2) ignition or another significant reaction is observed, or (3) pressure in the vessel increases beyond a pre-set level that triggers an automatic shutdown.

Davis, Eddie↗
NASA NTRS2006

Multimode-Guided-Wave Ultrasonic Scanning of Materials

Two documents discuss a method of characterizing advanced composite materials by use of multimode-guided ultrasonic waves. A transmitting transducer excites modulated (e.g., pulsed) ultrasonic waves at one location on a surface of a plate specimen. The waves interact with microstructure and flaws as they propagate through the specimen to a receiving transducer at a different location. The received signal is analyzed to determine the total (multimode) ultrasonic response of the specimen and utilize this response to evaluate microstructure and flaws. The analysis is performed by software that extracts parameters of signals in the time and frequency domains. Scanning is effected by using computer-controlled motorized translation stages to position the transducers at specified pairs of locations and repeating the measurement, data-acquisition, and data-analysis processes at the successive locations. One document presents results of a scan of a specimen containing a delamination.

Roth, Don↗
NASA NTRS2013

Multimode Directional Coupler for Utilization of Harmonic Frequencies from TWTAs

A novel waveguide multimode directional coupler (MDC) intended for the measurement and potential utilization of the second and higher order harmonic frequencies from high-power traveling wave tube amplifiers (TWTAs) has been successfully designed, fabricated, and tested. The design is based on the characteristic multiple propagation modes of the electrical and magnetic field components of electromagnetic waves in a rectangular waveguide. The purpose was to create a rugged, easily constructed, more efficient waveguide- based MDC for extraction and exploitation of the second harmonic signal from the RF output of high-power TWTs used for space communications. The application would be a satellitebased beacon source needed for Qband and V/W-band atmospheric propagation studies. The MDC could function as a CW narrow-band source or as a wideband source for study of atmospheric group delay effects on highdata- rate links. The MDC is fabricated from two sections of waveguide - a primary one for the fundamental frequency and a secondary waveguide for the second harmonic - that are joined together such that the second harmonic higher order modes are selectively coupled via precision- machined slots for propagation in the secondary waveguide. In the TWTA output waveguide port, both the fundamental and the second harmonic signals are present. These signals propagate in the output waveguide as the dominant and higher order modes, respectively. By including an appropriate mode selective waveguide directional coupler, such as the MDC presented here at the output of the TWTA, the power at the second harmonic can be sampled and amplified to the power level needed for atmospheric propagation studies. The important conclusions from the preliminary test results for the multimode directional coupler are: (1) the second harmonic (Ka-band) can be measured and effectively separated from the fundamental (Ku-band) with no coupling of the latter, (2) power losses in the fundamental frequency are negligible, and (3) the power level of the extracted second harmonic is sufficient for further amplification to power levels needed for practical applications. It was also demonstrated that third order and potentially higher order harmonics are measurable with this device. The design is frequency agnostic, and with the appropriate choice of waveguides, is easily scaled to higher frequency TWTs. The MDC has the same function but with a number of important advantages over the conventional diplexer.

Simmons, Rainee N.↗
NASA NTRS2017

Natural Language Based Multimodal Interface for UAV Mission Planning

As the number of viable applications for unmanned aerial vehicle (UAV) systems increases at an exponential rate, interfaces that reduce the reliance on highly skilled engineers and pilots must be developed. Recent work aims to make use of common human communication modalities such as speech and gesture. This paper explores a multimodal natural language interface that uses a combination of speech and gesture input modalities to build complex UAV flight paths by defining trajectory segment primitives. Gesture inputs are used to define the general shape of a segment while speech inputs provide additional geometric information needed to fully characterize a trajectory segment. A user study is conducted in order to evaluate the efficacy of the multimodal interface.

Chandarana, Meghan↗
NASA NTRSDate not supplied

Exploring Multimodal Interactions in Human-Autonomy Teaming Using a Natural User Interface

The creation of a multimodal, natural user interface to facilitate multi-agent interaction is essential to establishing trust among human and machine teammates in multi-agent systems. Trust is being researched, along with trustworthiness, as a path to certification of autonomous systems by the Autonomy Teaming and TRAjectories for Complex Trusted Operational Reliability (ATTRACTOR) project at NASA. The Autonomous Mission Experimental Logistics Interactive Assistant (AMELIA) is a natural user interface that enables multimodal interaction and is designed for rapid mission planning. AMELIA is an intelligent system that considers the user’s preferred communication strategies, as well as the time-critical aspect of the multi-agent system decision-making process. Twenty-four participants planned a multi-agent search and rescue mission, with the aid of an intelligent assistant. The results show that while the combined use of touch and speech was faster than speech alone, the single modality, touch, was still the most efficient. Future research should investigate additional input technologies.

Lisa R Le Vie↗
NASA NTRSDate not supplied

Exploring Multimodal Interactions in Human-Autonomy Teaming Using a Natural User Interface

The creation of a multimodal, natural user interface to facilitate multi-agent interaction is essential to establishing trust among human and machine teammates in multi-agent systems. Trust is being researched, along with trustworthiness, as a path to certification of autonomous systems by the Autonomy Teaming and TRAjectories for Complex Trusted Operational Reliability (ATTRACTOR) project at NASA. The Autonomous Mission Experimental Logistics Interactive Assistant (AMELIA) is a natural user interface that enables multimodal interaction and is designed for rapid mission planning. AMELIA is an intelligent system that considers the user’s preferred communication strategies, as well as the time-critical aspect of the multi-agent system decision-making process. Twenty-four participants planned a multi-agent search and rescue mission, with the aid of an intelligent assistant. The results show that while the combined use of touch and speech was faster than speech alone, the single modality, touch, was still the most efficient. Future research should investigate additional input technologies.

Lisa Renee Le Vie↗