Search NASA⌕ Search

SEARCH · Search NASA

Results for “multipactor breakdown”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

29 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Measurement of Dielectric Multipactor Thresholds at 110 GHz

We report experimental measurements of the threshold for multipactor discharges on dielectric surfaces at 110 GHz. Multipactor was studied in two geometries: electric field polarized parallel to or perpendicular to the sample surface. Measured multipactor thresholds ranged from 15 to 34 MV /m, more than 10 times higher than those found at conventional microwave frequencies. Measured thresholds were compared with prior data at lower frequencies, showing agreement with theoretical predictions that thresholds increase linearly with frequency. Measurements of the rf power dissipated in the multipactor show low dissipation (≤ 1%) for the parallel electric field case, but very strong dissipation for the perpendicular case, also in agreement with theoretical predictions. In conclusion, the agreement between experiment and theory over a wide range of frequencies provides a strong basis for the understanding of dielectric multipactor discharges.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

High power experimental studies of hybrid photonic band gap accelerator structures

This paper reports the first high power tests of hybrid Photonic Band Gap (PBG) accelerator structures. Three hybrid PBG (HPBG) structures were designed, built and tested at 17.14 GHz. Each structure had a triangular lattice array with 60 inner sapphire rods and 24 outer copper rods sandwiched between copper disks. The dielectric PBG band gap map allows the unique feature of overmoded operation in a TM02 mode, with suppression of both lower order modes, such as the TM11 mode, as well as higher order modes. The use of sapphire rods, which have negligible dielectric loss, required inclusion of the dielectric birefringence in the design. The three structures were designed to sequentially reduce the peak surface electric field. Simulations showed relatively high surface fields at the triple point as well as in any gaps between components in the clamped assembly. The third structure used sapphire rods with small pin extensions at each end and obtained the highest gradient of 19 MV/m, corresponding to a surface electric field of 78 MV/m, with a breakdown probability of 0.5 per pulse per meter for a 100-ns input power pulse. Operation at a gradient above 20 MV/m led to runaway breakdowns with extensive light emission and eventual damage. For all three structures, multipactor light emission was observed at gradients well below the breakdown threshold. This research indicated that multipactor triggered at the triple point limited the operational gradient of the hybrid structure.

43 PARTICLE ACCELERATORS↗
DOE OSTI2011

Review of recent theories and experiments for improving high-power microwave window breakdown thresholds

Dielectric window breakdown is a serious challenge in high-power microwave (HPM) transmission and radiation. Breakdown at the vacuum/dielectric interface is triggered by multipactor and finally realized by plasma avalanche in the ambient desorbed or evaporated gas layer above the dielectric. Methods of improving breakdown thresholds are key challenges in HPM systems. First, the main theoretical and experimental progress is reviewed. Next, the mechanisms of multipactor suppression for periodic rectangular and triangular surface profiles by dynamic analysis and particle-in-cell simulations are surveyed. Improved HPM breakdown thresholds are demonstrated by proof-of-principle and multigigawatt experiments. The current theories and experiments of using dc magnetic field to resonantly accelerate electrons to suppress multipactor are also synthesized. These methods of periodic profiles and magnetic field may solve the key issues of HPM vacuum dielectric breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Theory of factors limiting high gradient operation of warm accelerating structures

This final report summarizes the research performed during the time period from 8/1/2010 to 7/31/2013. It consists of two parts describing our studies in two directions: (a) analysis of factors limiting operation of dielectric-loaded accelerating (DLA) structures where the main problem is the occurrence of multipactor on dielectric surfaces, and (b) studies of effects associated with either RF magnetic or RF electric fields which may cause the RF breakdown in high-gradient metallic accelerating structures. In the studies of DLA structures, at least, two accomplishments should be mentioned: the development of a 3D non-stationary, self-consistent code describing the multipactor phenomena and yielding very good agreement with some experimental data obtained in joint ANL/NRL experiments. In the metallic structures, such phenomena as the heating and melting of micro-particles (metallic dust) by RF electric and magnetic fields in single-shot and rep-rate regimes is analyzed. Also, such processes in micro-protrusions on the structure surfaces as heating and melting due to the field emitted current and the Nottingham effect are thoroughly investigated with the account for space charge of emitted current on the field emission from the tip.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Self-consistent simulation of radio frequency multipactor on micro-grooved dielectric surface

The multipactor plays a key role in the surface breakdown on the feed dielectric window irradiated by high power microwave. To study the suppression of multipactor, a 2D electrostatic PIC-MCC simulation code was developed. The space charge field, including surface deposited charge and multipactor electron charge field, is obtained by solving 2D Poisson's equation in time. Therefore, the simulation is self-consistent and does not require presetting a fixed space charge field. By using this code, the self-consistent simulation of the RF multipactor on the periodic micro-grooved dielectric surface is realized. The 2D space distributions of the multipactor electrons and space charge field are presented. From the simulation results, it can be found that only half slopes have multipactor discharge when the slope angle exceeds a certain value, and the groove presents a pronounced suppression effect on the multipactor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Study of RF breakdown and multipacting in accelerator components

Radio frequency (RF) structures that are part of accelerators and energy sources, operate with sinusoidally varying electromagnetic fields under high RF energy. Here, RF breakdown and multipacting take place in RF structures and limit their performance. Electron field emission processes in a RF structure are precursors for breakdown processes. RF breakdown is a major phenomena affecting and causing the irreversible damage to RF structures. Breakdown rate and the damage induced by the breakdowns are its important properties. The damage is related to power absorbed during breakdown, while the breakdown rate is determined by the amplitudes of surface electric and magnetic fields, geometry, metal surface preparation and conditioning history. It limits working power and produces irreversible surface damage. The breakdown limit depends on the RF circuit, structure geometry, RF frequency, input RF power, pulse width, materials used, surface processing technique and surface electric and magnetic fields. Multipactor (MP) is a low power, electron multiplication based resonance breakdown phenomenon in vacuum and is often observed in RF structures. A multipactor discharge is undesirable, as it can create a reactive component that detunes the resonant cavities and components, generates noise in communication system and induces gas desorption from the conductor surfaces. In RF structures, certain conditions are required to generate multipacting. (author)

43 PARTICLE ACCELERATORS↗
NASA NTRS1978

Low loss, flexible, lightweight corporate RF feed system for SAR antenna application

Mechanical and electrical efficiency constraints imposed by the SEASAT-A synthetic aperture radar antenna posed difficult design problems. After consideration of available standard cable and waveguide systems, it was determined that an optimum design could be obtained from a suspended substrate RF feed system. Size and mechanical flexibility constraints forced the design of a flexible, suspended substrate section capable of 180-degree flexure. Original design goal for insertion loss over power division was 1 db; measured results indicated 0.6 db maximum across the band. Multipactor testing of system components indicated system breakdown capability in excess of 4 kW compared to a specification input maximum of 1500 W.

Schiavone, F.↗
DOE OSTI2026

Machine Learning for Mapping Multipactor Susceptibility in RF Systems: Capabilities and Generalization Constraints

Multipactor is a surface-driven electron avalanche phenomenon that degrades the performance and reliability of radio-frequency (RF) systems in particle accelerator and vacuum electronics applications. Multipactor behavior in a given device structure is conventionally assessed through susceptibility charts, which provide a parameter-space characterization of the instability. In this work, we assess the capabilities of machine-learning (ML) models to learn and predict such susceptibility charts and analyze the constraints governing their generalization across materials. Using a simulation-derived dataset spanning six distinct secondary-electron-yield material profiles in a canonical two-surface planar geometry, we train supervised regression models and artificial neural networks to predict the time-averaged electron growth rate, δavg, across the relevant parameter space. Model performance is evaluated using metrics that explicitly probe the structure of susceptibility charts, including Intersection over Union, Structural Similarity Index, and correlation analysis. Tree-based ensemble models outperform neural-network models in reconstructing susceptibility regions and in generalizing across material domains. Principal-component analysis reveals disjoint material feature distributions, indicating that the piecewise mode structure of multipactor susceptibility is difficult to represent with a single global model and that generalization is constrained by data coverage rather than by model complexity. An exhaustive reduced-coverage study further shows that sparse material-space coverage can yield mean performance in the same general range but producing large variability in the susceptibility-region overlap. These results clarify the capabilities of ML-based surrogate models for parameter-space characterization of multipactor discharge. They also provide guidance for their appropriate use in RF system design.

43 PARTICLE ACCELERATORS↗
DOE OSTI2014

Enhanced window breakdown dynamics in a nanosecond microwave tail pulse

The mechanisms of nanosecond microwave-driven discharges near a dielectric/vacuum interface were studied by measuring the time- and space-dependent optical emissions and pulse waveforms. The experimental observations indicate multipactor and plasma developing in a thin layer of several millimeters above interface. The emission brightness increases significantly after main pulse, but emission region widens little. The mechanisms are studied by analysis and simulation, revealing intense ionization concentrated in a desorbed high-pressure layer, leading to a bright light layer above surface; the lower-voltage tail after main pulse contributes to heat electron energy tails closer to excitation cross section peaks, resulting in brighter emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2011

Effect of surface produced secondary electrons on the sheath structure induced by high-power microwave window breakdown

Dielectric window breakdown, whose mechanism is not thoroughly understood, is a major factor of limiting the transmission and radiation of high-power microwave on the order of 1 GW. In this paper, a one-dimensional fluid-like sheath model is developed to investigate the sheath structures formed at different gas pressures. The dominant processes during the surface flashover are isolated by this model. In vacuum, electron multipactor is self-sustained by secondary electron emission, a positive space-charge potential is formed on the dielectric surface. With increasing gas pressure, electron-neutral ionization prevails against secondary electron emission. The multipactor effect is suppressed by the shielding of plasma electrons. This leads to the sheath potential changing gradually from a positive space-charge potential to a negative space-charge potential. For argon gas pressure lower than 14 Torr, the sheath is space charge limited. A potential minimum could be formed in front of the dielectric which traps secondary electrons emitted from the wall. With the higher argon gas pressure, the number density of ions becomes comparable to that of electrons, all surface produced electrons are accelerated toward the presheath region. Therefore, the normal sheath is formed and the resulting surface flashover on the dielectric surface becomes rf-driven volumetric breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Emergence of Novel Multipactor Modes Under Standing Wave Conditions in a Coaxial Line With an RF Window

The multipactor (MP) phenomenon can generate exponentially increasing electron populations in RF vacuum systems, leading to components becoming damaged. This paper uses numerical methods to analyze an RF vacuum window in a coaxial line under various standing wave conditions. Our methods are first benchmarked against the analytic and experimental results for the traveling wave and the numerical results for standing waves that were found in previous work. Second, the effect of standing waves on electron motion in the axial direction is discussed and related to electron trajectories in the presence of an RF window. It is found that standing waves with the magnetic maximum located behind the RF window lead to window collisions that can affect MP depending on the power, frequency, and conductor radii. For a low number of window collisions, MP was highly predictable by earlier work, but as the percentage of collisions occurring on the window surpassed approximately 50%, a novel mode of MP emerged to dominate the phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗