Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Estimating the Single-Trial Characteristics of Event-Related Responses: Evaluation of the MCERP Algorithm

Single-trial event-related responses collected during the course of an experiment are typically averaged before analysis resulting in a rather crude picture of event-related brain dynamics. It has been quite clear for some time that these responses exhibit trial-to-trial variability: however, the computational techniques necessary to deal with such responses in noisy conditions have not been available. To this end we have developed the multiple-component, event-related potential model (mcERP), which assumes that the each event-related response consists of a sum of multiple evoked components each described by a stereotypical waveshape. These waveshapes are allowed to vary in amplitude and onset latency from trial to trial, which allows us to capture, to first-order, the trial-dependent variations in event-related brain dynamics. We have constructed many sets of synthetic data designed to simulate intracortical recordings from a 15 channel, linear-array multielectrode implanted acutely in V1 of an awake-behaving macaque undergoing visual stimulation with a red light flash. This synthetic data was used to characterize the performance of the mcERP algorithm. First we quantified the degree to which such trial-to-trial variability aids in the identification of multiple components, and we demonstrate that amplitude variability is a more important factor in component separation than latency variability. Second, we quantified the behavior of the algorithm under two distinct signal-to-noise ratio (SNR) conditions: Gaussian noise independently present in each channel, and highly correlated (1/f distributed), far-field noise presented identically in each channel of the array. The mcERP algorithm was found to be robust to noise accurately identifying all component waveshapes and their associated single-trial characteristics down to SNR levels of -20dB for Gaussian noise and -7dB for 1/f far-field noise. Comparisons of the performance of this algorithm with factor analysis (FA) and independent component analysis (ICA) will be described by Knuth et al. (SFN abstracts, 2002). In addition, the advantages of application of mcERP to real data will be described by Shah et al, (these abstracts, 2002: SFN abstracts, 2002).

Knuth, K. H.↗

Measurement of Centaur/Orbiter multiple reaction forces in a full-scale test rig

A multiple component load cell for measuring load is described, and its capability and reliability are evaluated by utilizing it to measure the reaction forces between the Centaur and Centaur Support Structure. The system employs 11 six-component balances in a single test rig to react a combination of loads. The vehicle and balance loads, procedures for fabricating each balance, and the assembly of the balances are discussed. The calibration and testing of the balances are examined. It is noted that the multiple component load cell system is a cost-effective method for obtaining an accurate measurement of friction effects and primary loads.

Mole, Philip J.↗

Multidimensional computer simulation of Stirling cycle engines

The computer code ALGAE (algorithms for the gas equations) treats incompressible, thermally expandable, or locally compressible flows in complicated two-dimensional flow regions. The solution method, finite differencing schemes, and basic modeling of the field equations in ALGAE are applicable to engineering design settings of the type found in Stirling cycle engines. The use of ALGAE to model multiple components of the space power research engine (SPRE) is reported. Videotape computer simulations of the transient behavior of the working gas (helium) in the heater-regenerator-cooler complex of the SPRE demonstrate the usefulness of such a program in providing information on thermal and hydraulic phenomena in multiple component sections of the SPRE.

Hall, C. A.↗

A Numerical Method for Calculating the Wave Drag of a Configuration from the Second Derivative of the Area Distribution of a Series of Equivalent Bodies of Revolution

A method based on linearized and slender-body theories, which is easily adapted to electronic-machine computing equipment, is developed for calculating the zero-lift wave drag of single- and multiple-component configurations from a knowledge of the second derivative of the area distribution of a series of equivalent bodies of revolution. The accuracy and computational time required of the method to calculate zero-lift wave drag is evaluated relative to another numerical method which employs the Tchebichef form of harmonic analysis of the area distribution of a series of equivalent bodies of revolution. The results of the evaluation indicate that the total zero-lift wave drag of a multiple-component configuration can generally be calculated most accurately as the sum of the zero-lift wave drag of each component alone plus the zero-lift interference wave drag between all pairs of components. The accuracy and computational time required of both methods to calculate total zero-lift wave drag at supersonic Mach numbers is comparable for airplane-type configurations. For systems of bodies of revolution both methods yield similar results with comparable accuracy; however, the present method only requires up to 60 percent of the computing time required of the harmonic-analysis method for two bodies of revolution and less time for a larger number of bodies.

Levy, Lionel L., Jr.↗

Multiple nitrogen components in lunar soil sample 12023

Nitrogen is one of the enigmatic elements in lunar soils and breccias. The large range in (delta)N-15 values found within lunar soils was initially attributed to a secular increase in the N-15/N-14 ratio of 50 percent within the solar corona, and hence in the implanted nitrogen within the lunar regolith. However, more recent explanations have proposed a two (or many) component mixing model of solar wind nitrogen with some hypothetical non-solar components. Such components could include indigenous lunar nitrogen, nitrogen contained in interstellar grains in primitive meteorites, and magnetospheric nitrogen from the terrestrial atmosphere. To understand the makeup of multi-component mixtures it is advantageous to have carbon and noble gas data measured simultaneously, particularly in the case of lunar soils, where the solar wind is a likely fundamental contributor of nitrogen. To this end, a new nitrogen instrument was adapted to give some of the desired data in parallel. Conjoint measurements of N abundance and (delta)N-15 together with N/Ar-36 and Ar-36/Ar-38 ratios obtained during a stepped combustion of lunar soil 12023. The results are preliminary to a much more comprehensive investigation of well characterized fractions of the sample which we still have available from a previous study. Stepped combustion of a sample of 12023,7 yielded 94 ppm nitrogen with a (delta)N-15 = +22.2 percent, as well as the characteristic heavy-light-heavy pattern observed for lunar samples. The low temperature maximum was +75.1 percent at 550 C, the minimum at 800 C with (delta)N-15 = -16.7 percent and the high temperature (delta)N-15 peak is +90.6 percent at 1250 C. The major releases of nitrogen occurred between 650 C - 800 C in the form of a double peak; a third, substantial release occurred at 1150 C yielding 14.2 ppm of nitrogen coinciding with a small but recognizable drop in (delta)N-15 against a regularly increasing trend.

Brilliant, D. R.↗

Multiple Spectral Components in Nearby Radio Galaxies

The purpose of this work was to study the complicated structures appearing in ROSAT PSPC observations of nearby radio galaxies through detailed spectroscopy using ASCA, and through combining spectroscopic and structural analyses. The galaxy studied in this work was NGC 6251, believed to have a composite structure based on our ROSAT PSPC analysis, with a strong, point-like, nonthermal core embedded in a weaker, group-scale, thermal halo. However, this simplest interpretation of the PSPC data (Birkinshaw & Worrall 1993; ApJ 412 568) is not unique. Other possibilities included strong thermal emission from the core, with an implied cooling flow. ASCA's spectroscopic capabilities were expected to resolve the ambiguity. When the ASCA data for NGC 6251 were received, we found (after resolving considerable difficulties with the calibration) that they are entirely consistent with a simple power-law interpretation, but that a strong intrinsic X-ray absorbing column is required in NGC 6251. This absorbing column can be identified with the neutral hydrogen found with the VLA (Birkinshaw & Worrall, 1994; BAAS, 25, 1432), and confirmed in a later, higher-resolution, VLA study.

Birkinshaw, M.↗

Multiple Velocity Components in the C IV Absorption Line of NGC 5548

We have observed the much-studied Seyfert 1 galaxy NGC 5548 with the Goddard High-Resolution Spectrograph (GHRS) on the Hubble Space Telescope (HST). Our 14 ks observation covers the C IV emission line at a resolution of greater than 20,000. Our purpose was to study the absorption line found at lower resolution by IUE and the HST Faint Object Spectrograph. We found that the C IV absorption line resolves into six separate doublets with equivalent widths of 0.07-0.38 Angstrom. The absorption lines have blueshifts relative to the systemic velocity of the galaxy of 380-1250 km s(exp -1), except for one, which has a redshift of 250 km s(exp -1), suggesting both inflow and outflow. The inflowing component may be related to the accretion flow into the nuclear black hole. All the doublet lines are resolved by the GHRS. Three doublets are narrow, with FWHM greater than or approximately 100 km s(exp -1), and three are broad, FWHM approximately 160-290 km s(exp -1). We find evidence of partial covering by the narrow absorption lines. Either (but not both) of the two strongest broad doublets could be from the same material that produces the X-ray ionized absorber seen in soft X-rays. The remaining five systems must be at least 10 times less ionized (and so of lower total column density) to remain consistent with the X-ray spectra.

Mathur, Smita↗

Recent advances in computational structural reliability analysis methods

The goal of structural reliability analysis is to determine the probability that the structure will adequately perform its intended function when operating under the given environmental conditions. Thus, the notion of reliability admits the possibility of failure. Given the fact that many different modes of failure are usually possible, achievement of this goal is a formidable task, especially for large, complex structural systems. The traditional (deterministic) design methodology attempts to assure reliability by the application of safety factors and conservative assumptions. However, the safety factor approach lacks a quantitative basis in that the level of reliability is never known and usually results in overly conservative designs because of compounding conservatisms. Furthermore, problem parameters that control the reliability are not identified, nor their importance evaluated. A summary of recent advances in computational structural reliability assessment is presented. A significant level of activity in the research and development community was seen recently, much of which was directed towards the prediction of failure probabilities for single mode failures. The focus is to present some early results and demonstrations of advanced reliability methods applied to structural system problems. This includes structures that can fail as a result of multiple component failures (e.g., a redundant truss), or structural components that may fail due to multiple interacting failure modes (e.g., excessive deflection, resonate vibration, or creep rupture). From these results, some observations and recommendations are made with regard to future research needs.

Thacker, Ben H.↗

Aerodynamic shape optimization directed toward a supersonic transport using sensitivity analysis

This investigation was conducted from March 1994 to August 1995, primarily, to extend and implement the previously developed aerodynamic design optimization methodologies for the problems related to a supersonic transport design. These methods had demonstrated promise to improve the designs (more specifically, the shape) of aerodynamic surfaces, by coupling optimization algorithms (OA) with Computational Fluid Dynamics (CFD) algorithms via sensitivity analyses (SA) with surface definition methods from Computer Aided Design (CAD). The present extensions of this method and their supersonic implementations have produced wing section designs, delta wing designs, cranked-delta wing designs, and nacelle designs, all of which have been reported in the open literature. Despite the fact that these configurations were highly simplified to be of any practical or commercial use, they served the algorithmic and proof-of-concept objectives of the study very well. The primary cause for the configurational simplifications, other than the usual simplify-to-study the fundamentals reason, were the premature closing of the project. Only after the first of the originally intended three-year term, both the funds and the computer resources supporting the project were abruptly cut due to their severe shortages at the funding agency. Nonetheless, it was shown that the extended methodologies could be viable options in optimizing the design of not only an isolated single-component configuration, but also a multiple-component configuration in supersonic and viscous flow. This allowed designing with the mutual interference of the components being one of the constraints all along the evolution of the shapes.

Baysal, Oktay↗

FUSE Analysis of the Cyg OB1 Superbubble

FUSE observations of four stars in the line of sight to the Cyg OB1 IR-detected superbubble have been analyzed for high-velocity features in the O VI interstellar lines, which might be attributed to the shock structure of the superbubble. Multiple components were detected in the spectra of all four stars, with a velocity range of -85 kilometers per second to +29 kilometers per second. As many as four separate velocity components were identified in each spectrum, implying multiple shock structures in the superbubble. Derived column densities of the O VI components indicate shock velocities of 160-190 kilometers per second according to steady state shock theory.

Nichols, J.↗

A variable magnetic disc wind in the black hole X-ray binary GRS 1915+105?

Context. GRS 1915+105 being one of the brightest transient black hole binaries (BHBs) in the X-rays offers a unique testbed for the study of the connection between accretion and ejection mechanisms in BHBs. In particular, this source can be used to study the accretion disc wind and its dependence on the state changes in BHBs. Aims. Our aim is to investigate the origin and geometry of the accretion disc wind in GRS 1915+105. This study will provide a basis for planning future observations with the X-ray Imaging Spectroscopy Mission (XRISM), and may also provide important parameters for estimating the polarimetric signal with the upcoming Imaging X-ray Polarimetry Explorer (IXPE). Methods. We analysed the spectra of GRS 1915+105 in the soft ϕ and hard χ classes using the high-resolution spectroscopy offered by Chandra HETGS. In the soft state, we find a series of wind absorption lines that follow a non-linear dependence of velocity width, velocity shift, and equivalent width with respect to ionisation, indicating a multiple component or stratified outflow. In the hard state we find only a faint Fe XXVI absorption line. We model the absorption lines in both the states using a dedicated magneto-hydrodynamic (MHD) wind model to investigate a magnetic origin of the wind and to probe the cause of variability in the observed line flux between the two states. Conclusions. The MHD disc wind model provides a good fit for both states, indicating the possibility of a magnetic origin of the wind. The multiple ionisation components of the wind are well characterised as a stratification of the same magnetic outflow. We find that the observed variability in the line flux between soft and hard states cannot be explained by photo-ionisation alone but is most likely due to a large (three orders of magnitude) increase in the wind density. We find the mass outflow rate of the wind to be comparable to the accretion rate, suggesting an intimate link between accretion and ejection processes that lead to state changes in BHBs.

A. Ratheesh↗

Incipient fault detection study for advanced spacecraft systems

A feasibility study to investigate the application of vibration monitoring to the rotating machinery of planned NASA advanced spacecraft components is described. Factors investigated include: (1) special problems associated with small, high RPM machines; (2) application across multiple component types; (3) microgravity; (4) multiple fault types; (5) eight different analysis techniques including signature analysis, high frequency demodulation, cepstrum, clustering, amplitude analysis, and pattern recognition are compared; and (6) small sample statistical analysis is used to compare performance by computation of probability of detection and false alarm for an ensemble of repeated baseline and faulted tests. Both detection and classification performance are quantified. Vibration monitoring is shown to be an effective means of detecting the most important problem types for small, high RPM fans and pumps typical of those planned for the advanced spacecraft. A preliminary monitoring system design and implementation plan is presented.

Milner, G. Martin↗

Autoregressive harmonic analysis of the earth's polar motion using homogeneous International Latitude Service data

The homogeneous set of 80-year-long (1900-1979) International Latitude Service (ILS) polar motion data is analyzed using the autoregressive method (Chao and Gilbert, 1980), which resolves and produces estimates for the complex frequency (or frequency and Q) and complex amplitude (or amplitude and phase) of each harmonic component in the data. The ILS data support the multiple-component hypothesis of the Chandler wobble. It is found that the Chandler wobble can be adequately modeled as a linear combination of four (coherent) harmonic components, each of which represents a steady, nearly circular, prograde motion. The four-component Chandler wobble model 'explains' the apparent phase reversal during 1920-1940 and the pre-1950 empirical period-amplitude relation. The annual wobble is shown to be rather stationary over the years both in amplitude and in phase, and no evidence is found to support the large variations reported by earlier investigations. The Markowitz wobble is found to be marginally retrograde and appears to have a complicated behavior which cannot be resolved because of the shortness of the data set.

Chao, B. F.↗

The cyclic carbonates of the Latemar Massif: Evidence for the orbital forcing of a carbonate platform during the Middle Triassic

The Latemar Massif is an exhumed carbonate platform in the Dolomites of Northern Italy that was deposited during the Ladinian stage of the Middle Triassic. The platform interior is comprised of hundreds of vertically stacked, meter scale, subtidal limestone/vadose cap carbonate cycles ('Latemar couplets') arranged into upward thinning bundles of 5. The individual couplets are interpreted as the products of sea level oscillations occurring with an approximately 20,000 year periodicity; the 5:1 bundling is indicative of a lower order approximately 100,000 year modulating component. This combination of cycling is interpreted as a platform response to precession forcing with the 5:1 bundling an expression of modulation by the eccentricity. Spectral analysis confirms the significance of the 5:1 bundling, and identifies other significant bundling components related to other components of the eccentricity. The results show that the Latemar bundling spectrum is complex, with a splitting of components around the 1 percent bundling frequency, suggestive of the multiple component eccentricity in the 100,000 year range. On the other hand, there is no direct evidence for the major 400,000 year eccentricity component, although there is a dominant approximately 700,000 year cycling in the buildup (a 35:1 bundling period). Other higher frequency bundling components may be related to obliquity forcing. Simple models are presented to argue for and against an astronomical origin of these cyclic platform carbonates.

Hinnov, Linda↗

Energy dependence in solar cosmic ray composition

An investigation is conducted concerning an occurrence of effects related to energy dependence in studies of solar flare particle composition, taking into account eight large solar-flares associated particle events. The ratios C/O (carbon/oxygen), (MG plus Si)/O, and Fe(group)/O as a function of energy/nucleon are presented in a graph. A wide range of variation in the Fe(group)/O ratios is found from event to event. While the energy dependence is consistent in most events with individual element spectra, several events show unusual behavior in the Fe(group)/O ratio, due to the existence of several distinct spectral components. These multiple spectral components may imply multiple phases of acceleration or substantial interplanetary shock contamination at low energies at times well below the arrival time of these shocks at 1 AU.

Mcguire, R. E.↗

Dust emission from Barnard 35: Gas heating anomaly resolved

The molecular cloud B35 has puzzled observers because it contains gas which is, at T sub g approx. = 23 K, hotter that the surrounding dust whose T sub d approx. = 10 K. An investigation of the IRAS data, however, shows a previously unreported dust component at T sub d approx. 33 K, whose luminosity is ample to heat the gas. IRAS also finds that about 12 percent of the total luminosity around the core, and about 20 percent along the rim, arises from the small grain component with T less than or = 300 K. The temperature of these two components vary across the source, and this behavior is discussed. The results illustrate the presence of multiple components of dust in these clouds, and emphasize the need for data at multiple wavelengths.

Smith, Howard A.↗