SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Examined are: (1) the sequential clustering technique for the unsupervised automatic classification and mapping of earth resources satellite data, (2) theoretical analysis of the tests which were used, and (3) derivation of an alternative set of tests and their necessary algorithm.
Computer processing of MSS data to identify and map citrus trees affected by young tree decline is analyzed. The data were obtained at 1500-feet altitude in six discrete spectral bands covering regions from 0.53 to 1.3 millimicrons as well as from instrumental ground truths of tree crowns. Measurable spectral reflectance intensity differences are observed in the leaves of healthy and diseased trees, especially at wavelengths of 500 to 600 nm and 700 to 800 nm. The overall accuracy of the method is found to be 89%.
The techniques used for the automated classification of marshland vegetation and for the color-coded display of remotely acquired data to facilitate the control of mosquito breeding are presented. A multispectral scanner system and its mode of operation are described, and the computer processing techniques are discussed. The procedures for the selection of calibration sites are explained. Three methods for displaying color-coded classification data are presented.
A method of classification of digitized multispectral images is developed and experimentally evaluated on actual earth resources data collected by aircraft and satellite. The method is designed to exploit the characteristic dependence between adjacent states of nature that is neglected by the more conventional simple-symmetric decision rule. Thus contextual information is incorporated into the classification scheme. The principle reason for doing this is to improve the accuracy of the classification. For general types of dependence this would generally require more computation per resolution element than the simple-symmetric classifier. But when the dependence occurs in the form of redundance, the elements can be classified collectively, in groups, therby reducing the number of classifications required.
Multiple regression techniques were used to correlate ERTS-1 data with measured values of suspended sediment. The resultant equation was applied to a different ERTS scene using a deepwater area for atmospheric calibration. This approach provides greater accuracy than previously reported methods. Suspended sediment contours are plotted for the Potomac River, Virginia, using Chesapeake Bay deep water for atmospheric calibration.
Visual and infrared measurements from the five channel AVHRR on the NOAA-7 satellite are used operationally to derive sea surface temperatures. The multichannel data perform daytime and nighttime cloud detection tests, and the several atmospheric window channels in the thermal infrared correct for atmospheric attenuation. Monitoring of the sea surface temperature product with buoy data indicates stability in mean bias and rms difference with little variation by season or geographic area. Global mapping enables the derivation of monthly mean isotherms, monthly and annual changes, and anomaly patterns relative to climatology. Problems are associated with noise in the 3.7 micro m window channel, and with the injection of substantial volcanic aerosol into the stratosphere by the El Chichon eruption. Multichannel sea surface temperature charts are used to study phenomena such as equatorial long waves and the recent El Nino episode.
The spectral radiance and spectral reflectance of natural weathered surfaces of common sedimentary and igneous rocks is determined from in situ and in the laboratory measurements. In situ spectral radiance measurements (5-14 microns) were made with a portable spectral radiometer and were used to derive the spectral emissivity of the rocks. The spectral reflectance measurements (2.3-20 microns) were made in a laboratory with a Fourier transform IR spectrometer with a diffuse reflectance accessory. Good agreement is found between the two techniques. The field portable spectrometer has a larger field of view and the in situ data provide more accurate measurements of the intensity of spectral features related to temperature and atmospheric effects.
A two mirror flat field anastigmatic telescope was designed for multispectral sensing. The design was adapted to prism-type beamsplitting arrangements without loss of multispectral image quality by the addition of one refractive element. In addition to being relatively simple and mechanically insensitive, the design is immune to focus shift caused by index of refraction variation with temperature.
Multispectral snapshot imagers are capable of producing 2D spatial images with a single exposure at selected, numerous wavelengths using the same camera, therefore operate differently from push broom or whiskbroom imagers. They are payloads of choice in multi-angular, multi-spectral imaging missions that use small satellites flying in controlled formation, to retrieve Earth science measurements dependent on the targets Bidirectional Reflectance-Distribution Function (BRDF). Narrow fields of view are needed to capture images with moderate spatial resolution. This paper quantifies the dependencies of the imagers optical system, spectral elements and camera on the requirements of the formation mission and their impact on performance metrics such as spectral range, swath and signal to noise ratio (SNR). All variables and metrics have been generated from a comprehensive, payload design tool. The baseline optical parameters selected (diameter 7 cm, focal length 10.5 cm, pixel size 20 micron, field of view 1.15 deg) and snapshot imaging technologies are available. The spectral components shortlisted were waveguide spectrometers, acousto-optic tunable filters (AOTF), electronically actuated Fabry-Perot interferometers, and integral field spectrographs. Qualitative evaluation favored AOTFs because of their low weight, small size, and flight heritage. Quantitative analysis showed that waveguide spectrometers perform better in terms of achievable swath (10-90 km) and SNR (greater than 20) for 86 wavebands, but the data volume generated will need very high bandwidth communication to downlink. AOTFs meet the external data volume caps well as the minimum spectral (wavebands) and radiometric (SNR) requirements, therefore are found to be currently feasible in spite of lower swath and SNR.
Multispectral remote sensing of exposed volcanic province near Mt. Lassen
The paper describes a method of classifying multispectral remote sensing data using a context classifier. Because the computational requirements of the context classifier are very large, its implementation on parallel/pipelined multiprocessor systems is being investigated, so that the types of computations can be efficiently implemented. Special considerations necessary for such implementations are discussed, with particular reference to implementation on an array of Control Data Corporation Flexible Processors.
Band-to-band coregistration of multispectral remote sensing images can be achieved by electronic signal processing techniques rather than by costly and difficult mechanical alignment. This paper describes the results of a study of the end-to-end performance of electronic registration. The software simulation includes steps which model the performance of the geometric calibration process, the instrument image quality, detector performance and the effects of achieving coregistration through image resampling. The image resampling step emulates the Pipelined Resampling Processor, a real-time image resampler. The study demonstrates that the electronic alignment technique produces multispectral images which are superior to those produced by an imager whose pixel geometry is accurate to 0.1 pixel rms. The implications of this approach for future earth observation programs are discussed.
The applicability of parallel processing schemes to the implementation of a contextual classification algorithm which exploits the spatial and spectral context of a multispectral remote sensing pixel to achieve classification is examined. Two algorithms for classifying each multivariate pixel taking into account the probable classifications of neighboring pixels are presented which make use of a size three horizontally linear neighborhood, and the serial computational complexity of the more efficient algorithm is shown to grow in proportion to the number of pixels and the cube of the number of possible categories. The implementation of the more efficient algorithm on a CDC Flexible Processor system and on a multimicroprocessor system such as the proposed PASM is then discussed. It is noted that the use of N processors to perform the calculations N times faster than a single processor overcomes the principal disadvantage of contexual classifiers, i.e., their computational complexity.
Sensor system concepts are discussed, taking into account a multispectral linear array instrument design, an improved earth resources sensing instrument, design tradeoffs for a multispectral linear array instrument, imaging spectrometer technologies for advanced earth remote sensing, and the design concept for an optimized earth radiation budget sensor. Topics related to supporting optics and signal processing methodologies are explored, giving attention to two mirror objective design for multispectral remote sensing, the measurement of optical modulation functions in sparsely sampled mosaic focal plane arrays, multispectral linear array focal plane signal processing, signal processing for the NASA multispectral linear array, the concept for a multiple resolution pushbroom sensor, and the evolution of the octal radiometer. Techniques and applications for multispectral data are considered along with aspects of focal plane technology.
The global water cycle is perhaps the most important of all the biogeochemical cycles and evaporation, which is a significant component of the water cycle, is also linked with the energy and carbon cycles. Long-term evaporation over large areas has generally been computed as the difference of precipitation and river runoff. Analysis of short-term evaporation rate and its spatial pattern, however, is extremely complex, and multispectral remotely sensed data could aid in such analysis. Multispectral data considered here are visible and near-infrared reflectances, infrared surface temperature and the 37 GHz brightness temperatures. These observations are found to be not totally independent of each other. A few of their relationships are established and discussed considering physically-based models.
Water and energy exchanges at the land-atmosphere interface play a key role in determining patterns of regional and global climate. However, accurate estimation of surface fluxes of sensible and latent over arid and semiarid regions is a challenging task. In this study, a scenario for assimilating satellite data in the visible-infrared (AVHRR) and in the microwave (SSM/I) spectral ranges in a hydrological flux model will be presented. The aim of our investigation over the HAPEX-Sahel area in West Africa is to show that the use of multispectral remotely sensed data, in conjunction with radiative transfer models and hydrological flux model, can provide reasonable estimates of the surface fluxes. A discussion of the potentials and limitations of the approach is presented.
The use of Landsat TM, Airborne Imaging Spectrometer, and airborne Thermal IR Multispectral Scanner data in the geological evaluation of two sites in central Wyoming is described and illustrated with diagrams, maps, photographs, sample images, and tables of numerical data. The value of the remotely sensed information on the areal variation of attitude, sequence, thickness, and lithology of exposed strata is demonstrated; details of the data analysis are given; and the specialized software packages employed are briefly characterized.
Ocean dumping of waste materials is a significant environmental concern in the New York Bight. One of these waste materials, sewage sludge, was monitored in an experiment conducted in the New York Bight on September 22, 1975. Remote sensing over controlled sewage sludge dumping included an 11-band multispectral scanner, fiver multispectral cameras and one mapping camera. Concurrent in situ water samples were taken and acoustical measurements were made of the sewage sludge plumes. Data were obtained for sewage sludge plumes resulting from line (moving barge) and spot (stationary barge) dumps. Multiple aircraft overpasses were made to evaluate temporal effects on the plume signature.