Search NASA⌕ Search

SEARCH · Search NASA

Results for “multispectral sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Evaluation of UAV-derived multimodal remote sensing data for biomass prediction and drought tolerance assessment in bioenergy sorghum

Screening for drought tolerance is critical to ensure high biomass production of bioenergy sorghum in arid or semi-arid environments. The bottleneck in drought tolerance selection is the challenge of accurately predicting biomass for a large number of genotypes. Although biomass prediction by low-altitude remote sensing has been widely investigated on various crops, the performance of the predictions are not consistent, especially when applied in a breeding context with hundreds of genotypes. In some cases, biomass prediction of a large group of genotypes benefited from multimodal remote sensing data; while in other cases, the benefits were not obvious. In this study, we evaluated the performance of single and multimodal data (thermal, RGB, and multispectral) derived from an unmanned aerial vehicle (UAV) for biomass prediction for drought tolerance assessments within a context of bioenergy sorghum breeding. The biomass of 360 sorghum genotypes grown under well-watered and water-stressed regimes was predicted with a series of UAV-derived canopy features, including canopy structure, spectral reflectance, and thermal radiation features. Biomass predictions using canopy features derived from the multimodal data showed comparable performance with the best results obtained with the single modal data with coefficients of determination (R 2 ) ranging from 0.40 to 0.53 under water-stressed environment and 0.11 to 0.35 under well-watered environment. The significance in biomass prediction was highest with multispectral followed by RGB and lowest with the thermal sensor. Finally, two well-recognized yield-based drought tolerance indices were calculated from ground truth biomass data and UAV predicted biomass, respectively. Results showed that the geometric mean productivity index outperformed the yield stability index in terms of the potential for reliable predictions by the remotely sensed data. Collectively, this study demonstrated a promising strategy for the use of different UAV-based imaging sensors to quantify yield-based drought tolerance.

09 BIOMASS FUELS↗
DOE OSTI2020

Image Collection Simulation Using High-Resolution Atmospheric Modeling

A new method is described for simulating the passive remote sensing image collection of ground targets that includes effects from atmospheric physics and dynamics at fine spatial and temporal scales. The innovation in this research is the process of combining a high-resolution weather model with image collection simulation to attempt to account for heterogeneous and high-resolution atmospheric effects on image products. The atmosphere was modeled on a 3D voxel grid by a Large-Eddy Simulation (LES) driven by forcing data constrained by local ground-based and air-based observations. The spatial scale of the atmospheric model (10–100 m) came closer than conventional weather forecast scales (10–100 km) to approaching the scale of typical commercial multispectral imagery (2 m). This approach was demonstrated through a ground truth experiment conducted at the Department of Energy Atmospheric Radiation Measurement Southern Great Plains site. In this experiment, calibrated targets (colored spectral tarps) were placed on the ground, and the scene was imaged with WorldView-3 multispectral imagery at a resolution enabling the tarps to be visible in at least 9–12 image pixels. The image collection was simulated with Digital Imaging and Remote Sensing Image Generation (DIRSIG) software, using the 3D atmosphere from the LES model to generate a high-resolution cloud mask. The high-resolution atmospheric model-predicted cloud coverage was usually within 23% of the measured cloud cover. The simulated image products were comparable to the WorldView-3 satellite imagery in terms of the variations of cloud distributions and spectral properties of the ground targets in clear-sky regions, suggesting the potential utility of the proposed modeling framework in improving simulation capabilities, as well as testing and improving the operation of image collection processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Cycle-Consistent Adversarial Networks for Realistic Pervasive Change Generation in Remote Sensing Imagery

This paper introduces a new method of generating realistic pervasive changes in the context of evaluating the effectiveness of change detection algorithms in controlled settings. The method - a cycle-consistent adversarial network (CycleGAN) - requires low quantities of training data to generate realistic changes. Here we show an application of CycleGAN in creating realistic snow-covered scenes of multispectral Sentinel-2 imagery, and demonstrate how these images can be used as a test bed for anomalous change detection algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Sustainability Trait Modeling of Field-Grown Switchgrass (Panicum virgatum) Using UAV-Based Imagery

Unmanned aerial vehicles (UAVs) provide an intermediate scale of spatial and spectral data collection that yields increased accuracy and consistency in data collection for morphological and physiological traits than satellites and expanded flexibility and high-throughput compared to ground-based data collection. In this project, we used UAV-based multispectral imagery collected from MicaSense RedEdge-M on a DJI Matrice 600 Pro for automated phenotyping of field-grown switchgrass (Panicum virgatum), a leading bioenergy feedstock. The raw images were processed with Pix4D Mapper to create the reflectance data, and vegetation indices were calculated from a UAV-based multispectral camera. Statistical models were developed for rust disease caused by Puccinia novopanici, leaf chlorophyll, nitrogen, and lignin contents. For the first time, UAV remote sensing technology was used to explore the potential for multiple traits associated with sustainable production of switchgrass. One statistical model was developed for each individual trait based on the statistical correlation between vegetation indices and the corresponding trait.

CBI↗
DOE OSTI2022

Predicting Switchgrass Biomass Yields Using a Spectral Vegetation Index Derived from Multispectral Satellite Imagery

Successful scaling of perennial bioenergy crop production requires a landscape design that optimizes the benefits of finite lands for people, communities, and environments. Utilizing marginal areas is the key to sustainable bioenergy crop production (Ssegane et al., 2015, 2016). Marginal areas are often small-sized lands and unevenly distributed across the agricultural landscape (Ssegane et al., 2016); thus, a systematic, semi-automated remote sensing method is needed as an effective means of estimating bioenergy crop yields across landscapes. Argonne National Laboratory (Argonne) is currently developing a tool, Scaling Up Perennial Bioenergy Economics and Ecosystem Services Tool (SUPERBEEST), to identify marginal agricultural lands and quantify environmental and economic effects of perennial bioenergy crop production systems. The tool aims to provide users a path to foster the sustainable and productive integration of bioenergy crops in the Midwestern agricultural landscape. Reliable, cost-effective, and timely estimation of bioenergy crop yields using remote sensing would help calculate and track the success of integrated bioenergy crops in the landscape for those communities. Argonne previously conducted feasibility studies for estimating biomass yields for bioenergy feedstock, corn and perennial grass using spectral vegetation indices (SVIs)1 derived from optical imagery (Hamada et al., 2015, 2021). In both studies, SVIs, more specifically those sensitive to plant chlorophyll or nitrogen contents, showed potential for estimating or predicting biomass yields with a correlation of determination (R2) ranging from 0.54 to 0.96, indicating a value for further investigation as a viable means of quantifying bioenergy feedstock production across large landscapes. Thus, the goal of this study is to evaluate the feasibility of use of SVIs as a means of estimating or predicting switchgrass biomass yields at harvest using publicly available multispectral satellite imagery. The feasibility analysis was performed using four study areas of mature switchgrass located in Virginia. Objectives are to (1) examine the SVIs and establish their relationships with switchgrass biomass yields at harvest, (2) develop a parsimonious image processing model for predicting at-harvest yields by applying the relationships with the most promising spectral index and (3) map switchgrass yields predicted by the image processing model across the study sites. The calibration to field data will rely on switchgrass biomass yields determined by the baling method, representing a potential challenge to the analysis but an important practical aspect for future applications. With this research design, the study aimed to gain insights into enabling remote sensing-based estimation of bioenergy crop yields in a reliable, cost- effective, and timely manner across large, heterogeneous landscapes.

09 BIOMASS FUELS↗
DOE OSTI2020

A data-driven approach to sampling matrix selection for compressive sensing

Sampling is a fundamental aspect of any implementation of compressive sensing. Typically, the choice of sampling method is guided by the reconstruction basis. However, this approach can be problematic with respect to certain hardware constraints and is not responsive to domain-specific context. We propose a method for defining an order for a sampling basis that is optimal with respect to capturing variance in data, thus allowing for meaningful sensing at any desired level of compression. We focus on the Walsh-Hadamard sampling basis for its relevance to hardware constraints, but our approach applies to any sampling basis of interest. We illustrate the effectiveness of our method on the Physical Sciences Inc. Fabry-Perot interferometer sensor multispectral dataset, the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset, and a Colorado State University Swiss Ranger depth image dataset. The spectral datasets consist of simulant experiments, including releases of chemicals such as GAA and SF6. We combine our sampling and reconstruction with the adaptive coherence estimator (ACE) and bulk coherence for chemical detection and we incorporate an algorithmic threshold for ACE values to determine the presence or absence of a chemical. We compare results across sampling methods in this context. We have successful chemical detection at a compression rate of 90%. For all three datasets, we compare our sampling approach to standard orderings of sampling basis such as random, sequency, and an analog of sequency that we term `frequency.' In one instance, the peak signal to noise ratio was improved by over 30% across a test set of depth images.

compressive sensing, hyperspectral imaging, Walsh-↗
DOE OSTI2022

Implementing Spatio-Temporal 3D-Convolution Neural Networks and UAV Time Series Imagery to Better Predict Lodging Damage in Sorghum

Unmanned aerial vehicle (UAV)-based remote sensing is gaining momentum in a variety of agricultural and environmental applications. Very-high-resolution remote sensing image sets collected repeatedly throughout a crop growing season are becoming increasingly common. Analytical methods able to learn from both spatial and time dimensions of the data may allow for an improved estimation of crop traits, as well as the effects of genetics and the environment on these traits. Multispectral and geometric time series imagery was collected by UAV on 11 dates, along with ground-truth data, in a field trial of 866 genetically diverse biomass sorghum accessions. We compared the performance of Convolution Neural Network (CNN) architectures that used image data from single dates (two spatial dimensions, 2D) versus multiple dates (two spatial dimensions + temporal dimension, 3D) to estimate lodging detection and severity. Lodging was detected with 3D-CNN analysis of time series imagery with 0.88 accuracy, 0.92 Precision, and 0.83 Recall. This outperformed the best 2D-CNN on a single date with 0.85 accuracy, 0.84 Precision, and 0.76 Recall. The variation in lodging severity was estimated by the best 3D-CNN analysis with 9.4% mean absolute error (MAE), 11.9% root mean square error (RMSE), and goodness-of-fit (R2) of 0.76. This was a significant improvement over the best 2D-CNN analysis with 11.84% MAE, 14.91% RMSE, and 0.63 R2. The success of the improved 3D-CNN analysis approach depended on the inclusion of “before and after” data, i.e., images collected on dates before and after the lodging event. The integration of geometric and spectral features with 3D-CNN architecture was also key to the improved assessment of lodging severity, which is an important and difficult-to-assess phenomenon in bioenergy feedstocks such as biomass sorghum. This demonstrates that spatio-temporal CNN architectures based on UAV time series imagery have significant potential to enhance plant phenotyping capabilities in crop breeding and Precision agriculture applications.

3D-convolution neural networks↗
DOE OSTI2025

Tree-level carbon stock estimations across diverse species using multi-source remote sensing integration

Forests are critical carbon sinks, and remote sensing has been increasingly widely used for forest monitoring and biomass estimations. However, species-specific tree-level studies remain limited. In this study, we demonstrated the feasibility of integrating UAV-based LiDAR with high-resolution optical satellite imagery (0.5 m) to estimate biomass for individual trees across different species. The proposed method accurately estimated biomass for 53 trees (R² = 0.82, rRMSE = 0.44), with species-specific datasets, showing an average 25.2% increase in R² and a 14.8% reduction in rRMSE. A novel vegetation index combining forest structure parameters with vegetation indices (VIs) was developed using high-resolution multispectral satellite data (3 m) to explore its relationship with individual tree biomass. Combining forest structural parameters with VIs further improved estimation accuracy, achieving an R²of 0.89 and an rRMSE of 0.34. Species-specific datasets show an 11.6% increase in R²compared to methods without VIs, and a 22.2% improvement over methods using only VIs. SHapley Additive exPlanations (SHAP) analysis shows that the volume feature played a key role in model performance and remained stable throughout the training process. Altogether, the proposed approach enhances individual tree biomass and carbon sink estimations, showing great potential for large-scale precise forest carbon monitoring using multi-source remote sensing data.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Multispectral UAV imagery of experimental freshwater wetlands under 5 ppt saltwater intrusion, Louisiana, 2023 and 2024

Multispectral imagery was collected using an unmanned aerial vehicle (UAV) to evaluate how freshwater vegetation responds to short-term simulated saltwater intrusion events. The purpose of this data collection was to understand how plant health changes in response to acute salinity exposure, which is increasingly relevant in coastal wetland ecosystems facing sea level rise and storm surge events, such as in coastal Louisiana. Three experimental saltwater intrusions were conducted at a salinity of approximately 5 parts per thousand (ppt) for durations of 6-days, 10-days, and 17-days. UAV flights occurred both before and after each treatment. The resulting imagery was processed using Pix4DMapper software to georeference the images and generate orthomosaics. The multispectral sensor used in this study captures reflectance in five bands: blue, green, red, red-edge, and near-infrared. The uploaded data consist of georeferenced .tif orthomosaics for each spectral band, which are compatible with GIS software for vegetation analysis. This imagery can be utilized in investigations into vegetation stress, remote sensing of freshwater wetland ecosystems, and modeling of plant response to environmental changes.

EARTH SCIENCE > BIOSPHERE > ECOSYSTEMS↗
DOE OSTI2021

An Automated Method for Mapping Giant Kelp Canopy Dynamics from UAV

Satellite and aerial imagery have been used extensively for mapping the abundance and distribution of giant kelp ( Macrocystis pyrifera ) in southern California. There is now great potential for using unoccupied aerial vehicles (UAVs) to map kelp canopy at very high resolutions. However, tides and currents have been shown to affect the amount of floating kelp canopy on the water surface, and the impacts of these processes on remotely sensed kelp estimates in this region have not been fully quantified. UAVs were used to map fine-scale changes in canopy area due to tidal height and current speed at kelp forests off the coast of Palos Verdes, CA and Santa Barbara, CA. An automated method for detecting kelp canopy was developed that was 67% accurate using red-green-blue (RGB) UAV imagery and 93% accurate using multispectral UAV imagery across a range of weather, ocean, and illumination conditions. Increases in tidal height of 1 m reduced the amount of floating kelp canopy by 15% in Santa Barbara and by over 30% in Palos Verdes. The effect of current speed on visible kelp canopy was inconclusive, but there was a trend towards lower canopy area with increased current speed. Therefore, while tidal height and current speed can introduce significant variability to estimates of kelp abundance, the magnitude of this variability is site specific. Still, UAVs are a valuable tool for mapping of kelp canopy and can provide greater spatial resolution and temporal coverage than is possible from many satellite sensors. This data can provide insight into the patterns and drivers of high frequency fluctuations in kelp abundance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

More chemical detection through less sampling: amplifying chemical signals in hyperspectral data cubes through compressive sensing

Compressive sensing (CS) is a method of sampling which permits some classes of signals to be reconstructed with high accuracy even when they were sampled at sub-Nyquist rates. In this paper we explore a phenomenon in which bandwise CS sampling of a hyperspectral data cube followed by reconstruction can actually result in amplification of chemical signals contained in the cube. Perhaps most surprisingly, chemical signal amplification generally seems to increase as the level of sampling decreases. In some examples, the chemical signal is significantly stronger in a data cube reconstructed from 10% CS sampling than it is in the raw, 100% sampled data cube. We explore this phenomenon in two real-world datasets including the Physical Sciences Inc. Fabry-Perot interferometer sensor multispectral dataset and the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset. Each of these datasets contains the release of a chemical simulant, such as glacial acetic acid, triethyl phospate, and sulfur hexafluoride, and in all cases we use the adaptive coherence estimator (ACE) to detect a target signal in the hyperspectral data cube. We end the paper by suggesting some theoretical justifications for why chemical signals would be amplified in CS sampled and reconstructed hyperspectral data cubes and discuss some practical implications.

Hyperspectral imagery, Compressive Sensing, single↗
DOE OSTI2022

Estimating Channel Width for the Middle Green River Using Remote Sensing

Channel geometry can affect the abundance and quality of fish habitats along rivers in the Colorado River basin. However, previous analyses of sediment transport and channel narrowing in the middle Green River have focused on very limited reaches of the river and have used techniques with varying degrees of resolution, leading to potential problems with interpretation and generalization to the overall reach. The goal of this study is to develop comprehensive baseline information for channel width estimation along the Green River by combining a high-resolution digital elevation model (DEM) derived from Light Detection and Ranging (LiDAR) data and Sentinel-2 multispectral satellite imagery. The objectives are to (1) estimate channel width using Sentinel-2 satellite imagery alone, (2) estimate channel width using the high-resolution DEM with ancillary information extracted from the multispectral imagery, and (3) examine the agreement in channel width estimates between the products derived from the two methods to gain insights for cost effective channel-width monitoring.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Total variation vs L1 regularization: a comparison of compressive sensing optimization methods for chemical detection

One of the fundamental assumptions of compressive sensing (CS) is that a signal can be reconstructed from a small number of samples by solving an optimization problem with the appropriate regularization term. Two standard regularization terms are the L1 norm and the total variation (TV) norm. We present a comparison of CS reconstruction results based on these two approaches in the context of chemical detection, and we demonstrate that optimization based on the L1 norm outperforms optimization based on the TV norm. Our comparison is driven by CS sampling, reconstruction, and chemical detection in two real-world datasets: the Physical Sciences Inc. Fabry-Perot interferometer sensor multispectral dataset and the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset. Both datasets contain the release of a chemical simulant such as glacial acetic acid, triethyl phosphate, and sulfur hexafluoride. For chemical detection we use the adaptive coherence estimator (ACE) and bulk coherence, and we propose algorithmic ACE thresholds to define the presence or absence of a chemical of interest in both un-compressed data cubes and reconstructed data cubes. The un-compressed data cubes provide an approximate ground truth. We demonstrate that optimization based on either the L1 norm or TV norm results in successful chemical detection at a compression rate of 90%, but we show that L1 optimization is preferable. We present quantitative comparisons of chemical detection on reconstructions from the two methods, with an emphasis on the number of pixels with an ACE value above the threshold.

Hyperspectral imagery, L1-norm, total variation, A↗
DOE OSTI2022

Deep Convolutional Neural Networks Exploit High-Spatial- and -Temporal-Resolution Aerial Imagery to Phenotype Key Traits in Miscanthus

Miscanthus is one of the most promising perennial crops for bioenergy production, with high yield potential and a low environmental footprint. The increasing interest in this crop requires accelerated selection and the development of new screening techniques. New analytical methods that are more accurate and less labor-intensive are needed to better characterize the effects of genetics and the environment on key traits under field conditions. We used persistent multispectral and photogrammetric UAV time-series imagery collected 10 times over the season, together with ground-truth data for thousands of Miscanthus genotypes, to determine the flowering time, culm length, and biomass yield traits. We compared the performance of convolutional neural network (CNN) architectures that used image data from single dates (2D-spatial) versus the integration of multiple dates by 3D-spatiotemporal architectures. The ability of UAV-based remote sensing to rapidly and non-destructively assess large-scale genetic variation in flowering time, height, and biomass production was improved through the use of 3D-spatiotemporal CNN architectures versus 2D-spatial CNN architectures. The performance gains of the best 3D-spatiotemporal analyses compared to the best 2D-spatial architectures manifested in up to 23% improvements in R2, 17% reductions in RMSE, and 20% reductions in MAE. The integration of photogrammetric and spectral features with 3D architectures was crucial to the improved assessment of all traits. In conclusion, our findings demonstrate that the integration of high-spatiotemporal-resolution UAV imagery with 3D-CNNs enables more accurate monitoring of the dynamics of key phenological and yield-related crop traits. This is especially valuable in highly productive, perennial grass crops such as Miscanthus, where in-field phenotyping is especially challenging and traditionally limits the rate of crop improvement through breeding.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Co-Firing Switchgrass and Waste Coal in A Power Plant: A Techno-Economic and Life Cycle Evaluation for The Ohio River Valley (SWITCH) (Final Technical Report for Ohio State/FE0032204)

Abandoned coal mine lands (AMLs) represent one of the most persistent environmental challenges in the United States. Prior to the enactment of the Surface Mining Control and Reclamation Act (SMCRA) in 1977, coal mining operations were not legally required to reclaim disturbed lands, leaving behind approximately 500,000 AML sites nationwide. These sites pose severe environmental and health risks, including acid mine drainage, soil and water contamination, and spontaneous combustion of waste coal piles. Millions of Americans live within one mile of these AMLs, underscoring the urgency of remediation. Traditional reclamation practices, such as planting cool-season grasses, often fail to fully restore ecological function or leverage the economic potential of these lands. This project addressed these challenges by developing integrated strategies for resource recovery, land reclamation, and sustainable energy production. This project evaluated an integrated strategy to convert this liability into an opportunity by recovering waste coal and co-firing it with switchgrass (Panicum virgatum L.) cultivated on reclaimed or marginal AML areas in existing coal-fired power plants. Switchgrass not only provides a renewable feedstock but also aids in land reclamation and carbon sequestration. 1) Remote Sensing and Machine Learning for Waste Coal Identification Using Sentinel-2 satellite imagery and supervised classification, we applied four machine learning models to detect historical waste coal piles. Random Forest achieved the highest accuracy (precision: 86%, recall: 77%). Time-series analysis revealed gradual vegetation recovery since 1986, indicating natural reclamation processes in historical sites, while active mining areas showed ongoing disturbance. This workflow enables scalable monitoring and prioritization of reclamation efforts. 2) UAS-Based Stockpile Volume Estimation To quantify recoverable waste coal, we evaluated Unmanned Aerial Systems (UAS) equipped with Light Detection and Ranging (LiDAR) and multispectral sensors. Structure-from-Motion (SfM) photogrammetry combined with interpolated Digital Terrain Models (DTMs) achieved strong agreement with LiDAR reference volumes (Root Mean Square Error (RMSE) ≈147 m 3 , Mean Absolute Percentage Error (MAPE) ≈2%). Sensitivity analysis confirmed that spatial resolution significantly influences accuracy, emphasizing the need for high-resolution data for precise volume estimation. This approach offers a scalable, cost-effective, and accurate alternative to conventional ground-based surveys. 3) Switchgrass Cultivation for Bioenergy and Water Quality Improvement We assessed the hydrological and water quality impacts of converting AMLs to switchgrass production areas using the Soil and Water Assessment Tool (SWAT). Results showed that converting 10% of the watershed area into the switchgrass production zone reduced streamflow by 3.1%, total suspended solids by 18.1%, total nitrogen by 7.6%, and total phosphorus by 6.2%, while achieving biomass yields of 8.6–9.2 metric tons per hectare. These findings highlight switchgrass as a dual-benefit strategy for land reclamation and bioenergy feedstock production. 4) Integrated Co-Firing and CCS for Carbon-Negative Power Generation We modeled co-firing scenarios using the Power Plant Flexible Model (PPFM) to evaluate plant efficiency, greenhouse gas (GHG) emissions, and levelized cost of electricity (LCOE). Without carbon capture and storage (CCS), increasing switchgrass co-firing ratios reduced LCOE from $\$$150/MWh at 0% biomass to $\$$110/MWh at full substitution. Under CCS, costs remained higher (~$\$$250/MWh at 0% biomass) but decreased to $\$$200/MWh at 100% biomass, while enabling net-zero or carbon-negative electricity due to switchgrass sequestration benefits. Although CCS introduced efficiency penalties, pairing it with biomass co-firing offset these impacts and maximized climate benefits. Overall, optimizing co-firing ratios between 60-100%, supported by reliable logistics and storage strategies, emerged as a practical pathway to balance affordability, sustainability, and net-zero or negative GHG emissions while promoting productive reuse of AMLs.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Thermal, RGB, and Multispectral Unexploded Ordnance Data Collection

As of May 1, 2026 Landmine contamination affects 58 countries and many hundreds of thousands of km² of land. For example, the National Mine Action Program Demining Ukraine reporting that up to 144,000 km² of territory are potentially contaminated and require survey and clearance (National Mine Action Program “Demining Ukraine,” n.d.) alone. This contamination includes mines and other explosive remnants of war and continues to constrain civilian access, agricultural use, infrastructure recovery, and broader socioeconomic activity (International Campaign to Ban Landmines–Cluster Munition Coalition [ICBL-CMC], 2024; Mine Action Review, 2024). Current response activities rely on established mine-action approaches including non-technical survey, technical survey, clearance, and explosive ordnance disposal, consistent with international mine-action terminology and operational practice (United Nations Mine Action Service [UNMAS], 2024; Geneva International Centre for Humanitarian Demining [GICHD], 2023). In this context, UAV-based sensing, including UAV-mounted thermal imaging, may provide a useful supplementary capability by supporting faster, safer detection and mapping of suspect hazards prior to ground intervention (Smiljanic, 2022).

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Grass Evolutionary Lineages Can Be Identified Using Hyperspectral Leaf Reflectance

Hyperspectral remote sensing has the potential to map numerous attributes of the Earth’s surface, including spatial patterns of biological diversity. Grasslands are one of the largest biomes on Earth. Accurate mapping of grassland biodiversity relies on spectral discrimination of endmembers of species or plant functional types. We focused on spectral separation of grass lineages that dominate global grassy biomes: Andropogoneae (C 4 ), Chloridoideae (C 4 ), and Pooideae (C 3 ). We examined leaf reflectance spectra (350–2,500 nm) from 43 grass species representing these grass lineages from four representative grassland sites in the Great Plains region of North America. Here, we assessed the utility of leaf reflectance data for classification of grass species into three major lineages and by collection site. Classifications had very high accuracy (94%) that were robust to site differences in species and environment. We also show an information loss using multispectral sensors, that is, classification accuracy of grass lineages using spectral bands provided by current multispectral satellites is much lower (accuracy of 85.2% and 61.3% using Sentinel 2 and Landsat 8 bands, respectively). Our results suggest that hyperspectral data have an exciting potential for mapping grass functional types as informed by phylogeny. Leaf-level hyperspectral separability of grass lineages is consistent with the potential increase in biodiversity and functional information content from the next generation of satellite-based spectrometers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Using soil library hyperspectral reflectance and machine learning to predict soil organic carbon: Assessing potential of airborne and spaceborne optical soil sensing

Soil organic carbon (SOC) is a key variable to determine soil functioning, ecosystem services, and global carbon cycles. Spectroscopy, particularly optical hyperspectral reflectance coupled with machine learning, can provide rapid, efficient, and cost-effective quantification of SOC. However, how to exploit soil hyperspectral reflectance to predict SOC concentration, and the potential performance of airborne and satellite data for predicting surface SOC at large scales remain relatively underknown. Here, this study utilized a continental-scale soil laboratory spectral library (37,540 full-pedon 350–2500 nm reflectance spectra with SOC concentration of 0–780 g·kg –1 across the US) to thoroughly evaluate seven machine learning algorithms including Partial-Least Squares Regression (PLSR), Random Forest (RF), K-Nearest Neighbors (KNN), Ridge, Artificial Neural Networks (ANN), Convolutional Neural Networks (CNN), and Long Short-Term Memory (LSTM) along with four preprocessed spectra, i.e. original, vector normalization, continuum removal, and first-order derivative, to quantify SOC concentration. Furthermore, by using the coupled soil-vegetation-atmosphere radiative transfer model, we simulated twelve airborne and spaceborne hyper/multi-spectral remote sensing data from surface bare soil laboratory spectra to evaluate their potential for estimating SOC concentration of surface bare soils. Results show that LSTM achieved best predictive performance of quantifying SOC concentration for the whole data sets (R 2 = 0.96, RMSE = 30.81 g·kg –1 ), mineral soils (SOC ≤ 120 g·kg –1 , R 2 = 0.71, RMSE = 10.60 g·kg –1 ), and organic soils (SOC > 120 g·kg –1 , R 2 = 0.78, RMSE = 62.31 g·kg –1 ). Spectral data preprocessing, particularly the first-order derivative, improved the performance of PLSR, RF, Ridge, KNN, and ANN, but not LSTM or CNN. We found that the SOC models of mineral and organic soils should be distinguished given their distinct spectral signatures. Finally, we identified that the shortwave infrared is vital for airborne and spaceborne hyperspectral sensors to monitor surface SOC. This study highlights the high accuracy of LSTM with hyperspectral/multispectral data to mitigate a certain level of noise (soil moisture <0.4 m 3 ·m –3 , green leaf area < 0.3 m 2 ·m –2 , plant residue <0.4 m 2 ·m –2 ) for quantifying surface SOC concentration. Forthcoming satellite hyperspectral missions like Surface Biology and Geology (SBG) have a high potential for future global soil carbon monitoring, while high-resolution satellite multispectral fusion data can be an alternative.

54 ENVIRONMENTAL SCIENCES↗