Search NASA⌕ Search

SEARCH · Search NASA

Results for “nonlinear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Discovery of an Intrinsic Antiferromagnetic Semiconductor EuSc 2 Te 4 With Magnetism‐Driven Nonlinear Transport

Magnetic topological materials have recently emerged as a promising platform for studying quantum geometry by the nonlinear transport in thin film devices. In this work, an antiferromagnetic (AFM) semiconductor EuSc₂Te₄ as the first bulk crystal that exhibits quantum geometry-driven nonlinear transport is reported. This material crystallizes into an orthorhombic lattice with AFM order below 5.2 K and a bandgap of less than 50 meV. The calculated band structure aligns with the angle-resolved photoemission spectroscopy spectrum. The AFM order preserves combined space-time inversion symmetry but breaks both spatial inversion and time-reversal symmetry, leading to the nonlinear Hall effect (NLHE). Nonlinear Hall voltage measured in bulk crystals appears at zero field, peaks near the spin-flop transition as the field increases, and then diminishes as the spin moments align into a ferromagnetic order. This field dependence, along with the scaling analysis of the nonlinear Hall conductivity, suggests that the NLHE of EuSc₂Te₄ involves contributions from quantum metric, in addition to extrinsic contributions, such as spin scattering and junction effects. Furthermore, this NLHE is found to have the functionality of broadband frequency mixing, indicating its potential applications in electronics. This work reveals a new avenue for studying magnetism-induced nonlinear transport in magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nonlinear van der Waals Metasurfaces with Resonantly Enhanced Light Generation

Efficient nonlinear wave mixing is of paramount importance for a wide range of applications. However, weak optical nonlinearities pose significant challenges for accessing nonlinear light–matter interaction in compact systems. Here, we experimentally study second harmonic generation in deeply subwavelength 3R-MoS 2 metasurfaces (<λ/13 thick). Our measurements, supported by theoretical analysis, reveal a complex interplay and coupling between geometric resonances, optical extinction, and exciton-driven strong nonlinear susceptibility dispersion. We further demonstrate >150-fold enhancement in second harmonic signal at 740 nm mediated by the A exciton resonance. Additionally, our theoretical studies predict an enhancement of more than 10 6 in second harmonic generation in <100 nm thick structures exhibiting bound states in the continuum resonance. These findings provide insight into accessing and harnessing the unprecedented 3R-MoS 2 nonlinearities at a subwavelength scale, paving the way to ultracompact nonlinear photonic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Why Do Oceanic Nonlinearities Contribute Only Weakly to Extreme El Niño Events?

Abstract Extreme El Niño events have outsized global impacts and control the El Niño Southern Oscillation (ENSO) warm/cold phases asymmetries. Yet, a consensus regarding the relative contributions of atmospheric and oceanic nonlinearities to their genesis remains elusive. Here, we isolate the contribution of oceanic nonlinearities by conducting paired experiments forced with opposite wind stress anomalies in an oceanic general circulation model, which realistically simulates extreme El Niño events and oceanic nonlinearities thought to contribute to ENSO skewness (Tropical Instability Waves (TIWs), Nonlinear Dynamical Heating (NDH)). Our findings indicate a weak contribution of oceanic nonlinearities to extreme El Niño events in the eastern Pacific, owing to compensatory effects between lateral (NDH and TIWs) and vertical processes. These results hold across different vertical mixing schemes and modifications of the upper‐ocean heat budget mixed layer criterion. Our study reinforces previous research underscoring the pivotal role of atmospheric nonlinearities in shaping extreme El Niño events.

Geology↗
DOE OSTI2024

Nonlinear simulations of GAEs in NSTX-U

A set of nonlinear simulations has been performed in order to study the nonlinear evolution of unstable global Alfvén eigenmodes in the National Spherical Torus Experiment-Upgrade (NSTX-U). Results of the single toroidal mode number, n, simulations are compared with a full nonlinear simulation (all toroidal harmonics included). In single-n simulations, the conservation of two integrals of motion of a particle in a cyclotron resonance with a monochromatic wave is demonstrated, resulting in a one-dimensional evolution of the particle distribution in (E,μ,pϕ) phase-space. Nonlinear simulations (both single-n and full nonlinear) show a significant redistribution of the resonant fast ions, especially in the pitch parameter. Thus, the changes in the resonant particle's parallel and perpendicular energies can be several times larger than the total particle energy change, with only a small fraction transferring into the excitation of the mode itself. This implies that even a relatively small amplitude mode can significantly modify the beam distribution in the resonant region. For the NSTX-U case considered, the single-n simulation results are close to full nonlinear simulation only for the most unstable mode, in which case the saturation amplitudes and changes in the fast ion distribution are comparable. In contrast, peak amplitudes of subdominant modes in all-n simulations are smaller by a factor of 3–10 compared to single-n runs due to the flattening of the beam ion distribution by the fastest growing mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Improved bound on nonlinear quantum mechanics using a cryogenic radio frequency experiment

There are strong arguments that quantum mechanics may be nonlinear in its dynamics. A discovery of nonlinearity would hint at a novel understanding of the interplay between gravity and quantum field theory, for example. As such, experiments searching for potential nonlinear effects in the electromagnetic sector are important. Here, in this study, we outline such an experiment, consisting of a stream of random bits (which were generated using Rigetti’s Aspen-M-3 chip) as input to an rf signal generator coupled to a cryogenic detector. Projective measurements of the qubit state, which is originally prepared in an equal superposition, serve as the random binary output of a signal generator. Thereafter, spectral analysis of the rf detector would yield a detectable excess signal predicted to arise from such a nonlinear effect. A comparison between the projective measurements of the quantum bits vs the classical baseline showed no power excess. This sets a new limit on the electromagnetic nonlinearity parameter |ε| ⪅ 1.15 x 10 -12 , at a 90.0% confidence level. This is the most stringent limit on nonlinear quantum mechanics thus far and an improvement by nearly a factor of 50 over the previous experimental limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Adaptive nonlinear wavefront shaping in layered TMDs

Two-dimensional transition metal dichalcogenides are promising candidates for nonlinear photonics applications, offering strong nonlinear susceptibility and compatibility with integrated platforms. Although considerable effort has been devoted to manipulating second harmonic generation in these materials, the dynamic control of nonlinear wavefronts remains largely unexplored. Metasurfaces have enabled significant progress in nonlinear beam engineering, yet their practical implementation is limited by low conversion efficiencies and restricted design flexibility. In this work, we employ feedback-based wavefront shaping using spatial light modulators to enhance SHG from pyramid-like WS 2 multilayer structures by over three orders of magnitude in selected spatial regions. This approach allows us to program nonlinear holograms and dynamically shape the SHG signal through phase-only modulation, opening new possibilities for nonlinear imaging, optical information processing, and data communication.

Mavian, Alex [Rensselaer Polytechnic Inst., Troy, ↗
DOE OSTI2024

Ultrafast temporal phase-resolved nonlinear optical spectroscopy in the molecular frame

In an ultrafast nonlinear optical interaction, the electric field of the emitted nonlinear signal provides direct access to the induced nonlinear transient polarization or transient currents and thus carries signatures of ultrafast dynamics in a medium. Measurement of the electric field of such signals offers sensitive observables to track ultrafast electron dynamics in various systems. In this work, we resolve the real-time phase of the electric field of a femtosecond third-order nonlinear optical signal in the molecular frame. The electric field emitted from impulsively pre-aligned gas-phase molecules at room temperature, in a degenerate four-wave mixing scheme, is measured using a spectral interferometry technique. The nonlinear signal is measured around a rotational revival to extract its molecular-frame angle dependence from pump-probe time-delay scans. By comparing these measurements for two linear molecules, carbon dioxide and nitrogen, we show that the measured second-order phase parameter (temporal chirp) of the signal is sensitive to the valence electronic symmetry of the molecules, whereas the amplitude of the signal does not show such sensitivity. We compare measurements to theoretical calculations of the chirp observable in the molecular frame. This work is an important step towards using electric field measurements in nonlinear optical spectroscopy to study ultrafast dynamics of electronically excited molecules in the molecular frame.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

A Tensor Network-Based Quantum Algorithm for the Nonlinear 1D Burgers' Equation

In this work, we implement a tensor network-based quantum algorithm to solve unsteady, nonlinear partial differential equations (PDEs). The challenge lies in how to effectively represent, encode, process, and evolve the nonlinear system of PDEs on quantum computers. We will discuss the new techniques using the compressible 1-dimensional (1D) Burgers' equation as an example, because it represents the fundamental nonlinear feature and yet removes certain complexity in physics, allowing us to focus on the design of quantum algorithms. Previous attempts to solve nonlinear PDEs in quantum computation have often involved storing multiple copies of solutions or employing linearizations. Neither is practical due to exponential scaling with evolution time or insufficient solution accuracy. Our framework is based on matrix product states (MPSs) and matrix product operators (MPOs). For example, the velocity field is represented by MPS, whereas the linear and nonlinear spatial differential terms of the velocity field are processed by MPOs. Our primary focus herein is to verify and validate the various tensor network components of the algorithm using solutions obtained by the classical algorithms on high performance computing (HPC) architectures. We use a classical time marching method to demonstrate the functionality of the tensor network operations to model the PDE and their robustness with the time evolution of the system. Our classical simulation results demonstrate the utility of tensor network-based operations in modeling nonlinear PDEs and highlight the necessity as well as potential advantages of using quantum simulations for these techniques.

Gopalakrishnan Meena, Murali [ORNL] (ORCID:0000000↗
DOE OSTI2025

Kernel Manifolds: Nonlinear‐Augmentation Dimensionality Reduction Using Reproducing Kernel Hilbert Spaces

This paper generalizes recent advances on quadratic manifold (QM) dimensionality reduction by developing kernel methods-based nonlinear-augmentation dimensionality reduction. QMs, and more generally feature map-based nonlinear corrections, augment linear dimensionality reduction with a nonlinear correction term in the reconstruction map to overcome approximation accuracy limitations of purely linear approaches. While feature map-based approaches typically learn a least squares optimal polynomial correction term, we generalize this approach by learning an optimal nonlinear correction from a user-defined reproducing kernel Hilbert space. Our approach allows one to impose arbitrary nonlinear structure on the correction term, including polynomial structure, and includes feature map and radial basis function-based corrections as special cases. Furthermore, our method has relatively low training cost and has monotonically decreasing error as the latent space dimension increases. In conclusion, we compare our approach to proper orthogonal decomposition and several recent QM approaches on data from several example problems.

kernel methods↗
DOE OSTI2026

Nonlinear viscoelastic response of silicone additively manufactured direct ink write (DIW) foams under repetitive compression

To investigate dynamic fatigue behavior of foam in military protective applications, such as helmets, additively manufactured (AM) foams were compressively strained into the plateau region using a reduced design of experiments. A simple power law was found to govern the decline in dynamic stiffness (complex modulus) as the foams underwent the purchase order requirement of 10,000 cycles of small deformation in the plateau region. This rate of decline was newly found to correlate with the degree of nonlinearity in the material’s deformation, quantified using total harmonic distortion. Materials with low nonlinearity exhibited relatively stable stiffness across cycles, while those with high nonlinearity experienced greater losses. The observed nonlinearity depended on both applied stress and strain rate. A strong linear correlation (R 2 = 0.78) was identified between second-order nonlinearity and the time-dependent stiffness response. Two lattice structures were examined: face-centered tetragonal (FCT) and simple cubic (SC). The SC material exhibited higher total harmonic distortion (5%) and lower stiffness retention than the FCT (2%). In conclusion, these results suggest that for cyclic compression applications in a wide variety of industries such as packaging, personal protective equipment, or aerospace, selecting materials with lower stress and greater structural uniformity can enhance the stability of dynamic performance.

42 ENGINEERING↗
DOE OSTI2024

Nonlinear control of the minimum safety factor in tokamaks by optimal allocation of spatially moving electron cyclotron current drive

The minimum value of the safety factor profile is related to the magnetohydrodynamic (MHD) stability of the plasma confined in a tokamak. Therefore, active control of the minimum safety factor may mitigate MHD instabilities that can degrade or even terminate plasma confinement. Typically, in most tokamak scenarios, the minimum safety factor evolves spatially with time, i.e., the location at which the safety factor achieves the minimum value changes with time. In addition to the inherent nonlinearities in the minimum safety factor evolution, its spatial variation makes the control design challenging. In particular, complexity in control design may arise from the need for time-dependent nonlinear models that account for spatial variation of the minimum safety factor. Furthermore, the minimum safety factor may drift to locations where the actuator authority is low. The problem of minimum safety factor control with target location tracking and moving electron cyclotron current drive (ECCD) is addressed in this work. A nonlinear time-dependent model that incorporates the spatial variation of the minimum safety factor is presented. A nonlinear controller based on optimal feedback linearization is developed to track a target minimum safety factor. The proposed controller treats the ECCD position as a controllable variable. In other words, the controller prescribes the ECCD position (in addition to the non-inductive powers) in real time based on an optimal criterion that is defined a priori. This work also presents the steps necessary to integrate the minimum safety factor controller with a total energy controller to achieve multiple control objectives simultaneously. In conclusion, the proposed integrated control algorithm is tested using nonlinear simulations in the Control Oriented Transport SIMulator (COTSIM) for a DIII-D tokamak scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Unconventional nonlinear Hall effects in twisted multilayer 2D materials

We present the first investigation of unusual nonlinear Hall effects in twisted multilayer 2D materials. Contrary to expectations, our study shows that these nonlinear effects are not merely extensions of their monolayer counterparts. Instead, we find that stacking order and pairwise interactions between neighboring layers, mediated by Berry curvatures, play a pivotal role in shaping their collective nonlinear optical response. By combining large-scale Real-Time Time-Dependent Density Functional Theory (RT-TDDFT) simulations with model Hamiltonian analyses, we demonstrate a remarkable second-harmonic transverse response in hexagonal boron nitride four-layers, even in cases where the total Berry curvature cancels out. Furthermore, our symmetry analysis of the layered structures provides a simplified framework for predicting nonlinear responses in multilayer materials in general. Our investigation challenges the prevailing understanding of nonlinear optical responses in layered materials and opens new avenues for the design and development of advanced materials with tailored optical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nonlinear optimal recovery in Hilbert spaces

Here, this paper investigates solution strategies for nonlinear problems in Hilbert spaces, such as nonlinear partial differential equations (PDEs) in Sobolev spaces, when only finite measurements are available. We formulate this as a nonlinear optimal recovery problem, establishing its well-posedness and proving its convergence to the true solution as the number of measurements increases. However, the resulting formulation might not have a finite-dimensional solution in general. We thus present a sufficient condition for the finite dimensionality of the solution, applicable to problems with well-defined point evaluation measurements. To address the broader setting, we introduce a relaxed nonlinear optimal recovery and provide a detailed convergence analysis. An illustrative example is given to demonstrate that our formulations and theoretical findings offer a comprehensive framework for solving nonlinear problems in infinite-dimensional spaces with limited data.

convergence↗
DOE OSTI2025

Nonlinearities in Magnetic Confinement, Ionospheric Physics, and Population Explosion Leading to Profile Resilience Нелінійності в магнетному утриманні, фізиці іоносфери та процесі демографічного вибуху, які приводять до стійкості профілю

Nonlinearities play an important role in many fields. In the field of thermonuclear fusion, they are involved in questions such as profile resilience and fluid closure. A nonlinear phenomenon common to both fusion and astrophysical planets is the generation of zonal flows. These flows play a significant role in determining the level of turbulence and fluid closure in fusion. The effects of resonance broadening and nonlinearities are investigated, specifically focusing on the case of nonlinear instability that has appeared in drift waves. Similarities and differences between our systems are discussed, with population explosion and the dynamics of nonlinear systems for drift waves by different states in profile resilience described with great precision. The aim of our study is to put our fluid model for drift waves in tokamaks within the wider framework of statistical physics principles. This reinforces our belief in the broad application of our drift wave model, which encompasses current tokamaks, ITER, and the fusion pilot plant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

First‐Order Empirical Interpolation Method for Real‐Time Solution of Parametric Time‐Dependent Nonlinear PDEs

ABSTRACT We present a model reduction approach for the real‐time solution of time‐dependent nonlinear partial differential equations (PDEs) with parametric dependencies. A major challenge in constructing efficient and accurate reduced‐order models for nonlinear PDEs is the efficient treatment of nonlinear terms. We address this by unifying the implementation of hyperreduction methods to deal with nonlinear terms. Furthermore, we introduce a first‐order empirical interpolation method (EIM) to provide an efficient approximation of the nonlinear terms in time‐dependent PDEs. We demonstrate the effectiveness of our approach on the Allen–Cahn equation, which models phase separation, and the Buckley–Leverett equation, which describes two‐phase fluid flow in porous media. Numerical results highlight the accuracy, efficiency, and stability of the proposed method compared with both the Galerkin–Newton approach and hyper‐reduced models using the standard EIM.

Nguyen, Ngoc Cuong [Center for Computational Engin↗
DOE OSTI2025

Atomic Layer Deposition for Enhanced Light Confinement in Nonlinear Metasurfaces

Metasurfaces enable the generation of strong nonlinear signals, with nanoantenna resonances significantly enhancing the nonlinear response through tailored light–matter interactions. Commonly used nonlinear materials, such as lithium niobate and other similar crystals, have relatively moderate refractive indices, limiting their ability to achieve the strong mode localization attainable with high-refractive-index materials like silicon. Here, we report on enhancing mode confinement in nonlinear metasurfaces by employing conformal coatings of titania with atomic layer deposition (ALD). We develop a low-temperature ALD that enables the augmentation of resonances in materials that cannot withstand high-temperature processing, including polymers. We report on the design of a metasurface incorporating a nonlinear crystal and an ALD coating, achieving enhanced mode localization through this approach in the near-infrared wavelength range. We numerically demonstrate a significant enhancement in second-harmonic generation in the designed metasurface, achieved by optimizing the thickness of the ALD coating for the telecommunication wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exciton dressing by extreme nonlinear magnons in a layered semiconductor

Collective excitations presenting nonlinear dynamics are fundamental phenomena with broad applications. A prime example is nonlinear optics, where diverse frequency mixing processes are central to communication, sensing, wavelength conversion, and attosecond physics. Leveraging recent progress in van der Waals magnetic semiconductors, we demonstrate nonlinear opto-magnonic coupling by presenting exciton states dressed by up to 20 harmonics of magnons, resulting from their nonlinearities, in the layered antiferromagnetic semiconductor CrSBr. We also create tunable optical side bands from sum- and difference-frequency generation between two optically bright magnon modes under symmetry breaking magnetic fields. Moreover, the observed difference-frequency generation mode can be continuously tuned into resonance with one of the fundamental magnons, resulting in parametric amplification of magnons. These findings realize the modulation of the optical frequency exciton with the extreme nonlinearity of magnons at microwave frequencies, which could find applications in magnonics and hybrid quantum systems, and provide new avenues for implementing opto-magnonic devices.

Diederich, Geoffrey M.↗
DOE OSTI2025

The role of fast and slow dynamics in nonlinear resonant ultrasound spectroscopy of consolidated granular materials

Abstract Elastic nonlinearity observed in consolidated granular media can be attributed to the combination of slow and fast effects, which give rise to hysteresis and relaxation of both modulus and damping after the sample is perturbed. A consequence is a high level of complexity in the measurements of the sample linear and nonlinear elastic parameters. The results of experiments are dependent on the experimental protocol that is adopted to measure the relevant quantities and it is hard to quantify parameters with accuracy and repeatability. Here we focus on examining Nonlinear Resonant Ultrasound Spectroscopy, showing experimentally the role of slow dynamics in the process and quantifying/discussing its influence on the quantification of nonlinearity. We also propose a model to describe the process, which shows that different contributions to nonlinearity (e.g., classical and hysteretic) could be due to physical features (defects) relaxing with different relaxation times.

Science & Technology - Other Topics↗