Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Numerical simulation of the actuation system for the ALDF's propulsion control valve

A numerical simulation of the actuation system for the propulsion control valve (PCV) of the NASA Langley Aircraft Landing Dynamics Facility was developed during the preliminary design of the PCV and used throughout the entire project. The simulation is based on a predictive model of the PCV which is used to evaluate and design the actuation system. The PCV controls a 1.7 million-pound thrust water jet used in propelling a 108,000-pound test carriage. The PCV can open and close in 0.300 second and deliver over 9,000 gallons of water per sec at pressures up to 3150 psi. The numerical simulation results are used to predict transient performance and valve opening characteristics, specify the hydraulic control system, define transient loadings on components, and evaluate failure modes. The mathematical model used for numerically simulating the mechanical fluid power system is described, and numerical results are demonstrated for a typical opening and closing cycle of the PCV. A summary is then given on how the model is used in the design process.

Korte, John J.↗
NASA NTRS1976

Numerical simulation of tornado wind loading on structures

A numerical simulation of a tornado interacting with a building was undertaken in order to compare the pressures due to a rotational unsteady wind with that due to steady straight winds used in design of nuclear facilities. The numerical simulations were performed on a two-dimensional compressible hydrodynamics code. Calculated pressure profiles for a typical building were then subjected to a tornado wind field and the results were compared with current quasisteady design calculations. The analysis indicates that current design practices are conservative.

Maiden, D. E.↗
NASA NTRS1987

Numerical simulation of compressible flow around complex two-dimensional cavities

Compressible viscous flow around two-dimensional cavities, that model the midplane flow in and around an airborne telescope cavity, are obtained through numerical simulation. Numerical solutions using the patched grid CSCM scheme for compressible, unsteady flow are presented for the cavities, with and without blowing. The time evolving solutions show interesting flow features. Relevant results for a limited number of problems presented here show the unsteady nature of the flow and its dependence on various parameters such as Reynolds number, the wall conditions, etc. The voluminous data of time evolving flow field solutions are analyzed through movies of the velocity vectors, and contours of other flow variables.

Venkatapathy, Ethiraj↗
NASA NTRS1981

Direct numerical simulations of turbulent shear flows

Numerical simulations of wakes of axisymmetric bodies and of turbulent mixing layers are reported. The flows were assumed to be statistically homogeneous in the mean flow direction, in concert with experimental data and the self-similarity theorem. The nonlinear Navier-Stokes equations were solved by a pseudo-spectral numerical method using a 32 x 32 x 33 point grid and an algorithm for fast Fourier transforms and inverse transforms. Leapfrog time differencing was employed on nonlinear terms and time differencing on viscous terms. Towed wakes and wakes behind a self-propelled body were simulated, showing that the towed wakes exhibited a proper temporal behavior after an initial period of adjustment, including the development of a kurtosis near the wake edge, which is experimentally verifiable. The mixing-layer simulation displayed the laboratory demonstrated presence of large scale features such as vortex cores, while the lateral coherence was weak.

Metcalfe, R. W.↗
NASA NTRS1988

Application of similitude principle to the numerical simulation of solar atmospheric dynamics

Numerical simulation has become an essential part of solar physics because the complex nonlinear characteristics of solar phenomena makes analytical solutions difficult to obtain. Realistic simulation of the birth and decay of an active region still is not possible because of the wide range of spatial and time scales that must be considered. Therefore, proper scaling rules must be recognized for the development of appropriate models. In this paper, the similitude principle is applied to develop scaling rules. It is found that these rules are highly dependent on the physical nature of the specific problem under consideration. A set of 'similitude critiques' is presented for some specific physical conditions. Numerical examples of coronal dynamic response and active region dynamics are used to demonstrate these ideas.

Wu, S. T.↗
NASA NTRS1978

Numerical simulation of plasma double layers

Numerical simulation results are presented for a plasma double layer, the computer model being a finite one-dimensional particle-in-cell plasma with specified potential difference across the system. A single pulse is formed which crosses the system with constant velocity; this is followed by the formation of a potential drop across a limited region of the plasma. An approximate expression relating the spatial extent of the double layer and the potential drop is presented. Electron and ion beams are generated which tend to lead to instabilities in the upstream and downstream regions.

Joyce, G.↗
NASA NTRS1983

Numerical Simulation of Turbulent Fluid Flows

Numerical simulation of turbulent flows is discussed. Computational requirements for the direct simulaton of turbulence, simulation of arbitrary homogeneous flows, an expansion technique for wall bounded flows with application to pipe flow, and possibilities of flow representations or modeling techniques that allow the simulation of high Reynolds number flows with a relatively small number of dependent variables are included.

Leonard, A.↗
NASA NTRS1984

Numerical simulation of mesoscale precipitation

The numerical simulation of mesoscale precipitation as well as the development of software and appropriate computer techniques are investigated. The development of a mesoscale model and the means to incorporate meteorological data into the model are examined.

Kalb, M. W.↗
NASA NTRS1987

Direct numerical simulation of buoyantly driven turbulence

Numerical simulations of homogeneous turbulence subject to buoyant forcing were performed. The presence of a mean temperature gradient combined with a gravitational field results in a forcing term in the momentum equations. The development of the turbulence was studied and compared to the decay of similar fields in the absence of gravity. In the buoyantly driven field, the vorticity is preferentially aligned with the intermediate eigenvector of the strain-rate tensor and the local temperature gradient is more likely to be aligned with the most compressive eigenvector. These relationships are qualitatively similar to those observed in previous shear flow results studied by Ashurst (1987). A tensor diffusivity model for passive scalar transport developed from shear flow results in Rogers, Moin, and Reynolds (1986) also predicts this buoyant scalar transport, indicating that the relationship between the scalar flux and the Reynolds stress is similar in both flows.

Ashurst, William T.↗
NASA NTRS1982

Numerical simulation of magnetohydrodynamic shock propagation in the corona

Recent developments in the field of numerical simulation models for the study of shock wave propagation in the corona are presented. These models are based on gasdynamic (GD) and ideal (that is, dissipationless, except at shocks) magnetohydrodynamic (MHD) theories. The characteristics and physical interpretations of the results derived from these models are discussed in some detail. The most significant physical results obtained to date are provided by the two-dimensional non-planar, time-dependent, MHD numerical simulation model. In this model, the non-linear interaction among the three essential MHD waves, i.e., fast-, slow-, and Alfven waves are demonstrated. Finally, the physical relevance of these numerical simulation models in relation to observed solar activity is presented.

Wu, S. T.↗
NASA NTRS1978

The direct numerical simulations of the turbulent wakes of axisymmetric bodies

Results of direct numerical simulations of turbulence are compared with both laboratory data and self-similarity theory for the case of the turbulent wakes of towed, axisymmetric bodies. In general, the agreement of the simulation results with both the laboratory data and the self-similarity theory is good, although the comparisons are hampered by inadequate procedures for initializing the numerical simulations.

Riley, J. J.↗
NASA NTRS1977

Numerical simulation of spacecraft charging phenomena

A numerical simulation program is being constructed having the following features: (1) infinite circular cylindrical geometry with angle-dependence, (2) inclusion of incident particles, photoelectrons, secondary electrons, backscattered electrons, any gun emissions, and any internal current pathways including surface conductive layers, (3) quasistatic time-dependent iteration, in which sheath potential changes during particle transit times are ignored, (4) use of approximate, locally-dependent space charge density expressions in solving Poisson's equation for sheath potentials, with use of numerical orbit-following to determine surface currents, and (5) incident particle velocity distributions isotropic or beam-like, or some superposition of these. Rationales for each of these features are discussed.

Laframboise, J. G.↗
NASA NTRS1981

Numerical simulation of transonic flows in diffusers

Numerical simulations were made of two-dimensional transonic flows in diffusers, including flow separation induced by a shock or adverse pressure gradient. The mass-averaged, time-dependent, compressible Navier-Stokes equations, simplified by the thin-layer approximation, were solved using MacCormack's hybrid method. The eddy-viscosity formulation was described by the Wilcox-Rubesin's two-equation, k-omega model. Detailed comparison of the computed results with measurements showed good agreement in all cases, including one with massive separation induced by a strong shock. The computation correctly predicted the details of a distinct lambda shock pattern, closely duplicating the configuration observed experimentally in spark-schlieren photographs.

Liou, M.-S.↗
NASA NTRS1983

Numerical simulation of turbulent trailing edge flows

Numerical simulations of the time-dependent, Reynolds-averaged, Navier-Stokes equations, employing a two-equation turbulence model, are presented and compared with measurements from a series of trailing edge experiments at transonic Mach numbers. The test flows include an asymmetric flow with no separation, an asymmetric flow with a small region of separation and a symmetric flow with a large shock-wave induced separated zone. Comparisons are made for mean surface quantities as well as for mean and fluctuating flow-field quantities. For the trailing-edge flows with little or no separation, the solutions correctly predict all the major features of the flow field. Treatment of the viscous-inviscid interaction was found to be important for predicting these test cases. Two-equation eddy-viscosity turbulence models were found to be adequate for these flows. However, for the shock-wave induced separation case, these turbulence models were inadequate to predict this flow field. Modifications of the turbulence model to correct these deficiencies are discussed.

Horstman, C. C.↗
NASA NTRS1987

Numerical simulation of viscous transonic airfoil flows

Numerical simulations of transonic airfoil flows using the Reynolds-averaged Navier-Stokes equations and various turbulence models are presented and compared with experimental data. Three different airfoils were investigated under varying flow conditions ranging from subcritical unseparated flows to supercritical separated flows. The turbulence models investigated consisted of three zero-equation models and one two-equation model. For unseparated flows involving weak viscous-inviscid interactions, the four models were comparable in their agreement with experiment. For separated flows involving strong viscous-inviscid interactions, the nonequilibrium zero-equation model of Johnson and King gave the best overall agreement with experiment.

Coakley, Thomas J.↗
NASA NTRS1987

Numerical simulations of collisions between rotating particles

Numerical simulations of Keplerian systems consisting of 200 mutually colliding rotating particles show that friction and surface irregularity reduce the equilibrium velocity dispersion and transfer some of the energy of random velocities to rotational velocities. The results confirm the theoretical predictions of Salo (1987). Simulations are performed for identical and different particle sizes, and for a power-law distribution of sizes. Taking rotation into account is not found to alter the previously observed Rayleigh distribution of eccentricities and inclinations, while the components of the rotational velocities are found to follow a Gaussian distribution. Application to the rarefied regions of Saturn's rings suggests that friction is able to reduce the equilibrium geometric thickness by about one-half.

Salo, H.↗
NASA NTRS1987

Collisional interchange instability. I - Numerical simulations of intermediate-scale irregularities

Numerical simulations of the generalized Rayleigh-Taylor instability are presented. The model and simulations are applicable to bottomside and topside spread F, unstable barium cloud dynamics, and collisional interchange instability in general. The principal result is that the evolution of the instability tends to an anisotropic state consisting of nearly sinusoidal (quasi-periodic) variation along the effective electric field, and shocklike structures propagating perpendicular to E(eff) along the extrema of the quasi-periodic structures. The spectral properties of the nonlinear state are analyzed using one-dimensional power spectra calculated along spatial trajectories for selected angles to E(eff). In this way a direct comparison to in situ probe data can be made. The inherent anisotropy of the nonlinear state is reflected in major qualitative differences between the spectra taken parallel to and perpendicular to E(eff). The fundamental finding of the present work is that anisotropy in interchange dynamics is much greater than had been previously reported. This strong anisotropy can explain much of the spectral and spatial structural characteristics of both bottomside and topside spread F. In a companion paper a comparison of the simulation results to various in situ data sets is given.

Zargham, S.↗
NASA NTRS1989

Numerical simulations in combustion

This paper reviews numerical simulations in reacting flows in general and combustion phenomena in particular. It is shown that use of implicit schemes and/or adaptive mesh strategies can improve convergence, stability, and accuracy of the solution. Difficulties increase as turbulence and multidimensions are considered, particularly when finite-rate chemistry governs the given combustion problem. Particular attention is given to the areas of solid-propellant combustion dynamics, turbulent diffusion flames, and spray droplet vaporization.

Chung, T. J.↗