Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Numerical techniques in linear duct acoustics, 1980-81 update

A review is presented covering finite element and finite difference analysis of small amplitude (linear) sound propagation in straight and variable area ducts. This review stresses the new work performed during the 1980-1981 time frame, although a brief discussion of earlier work is also included. Emphasis is placed on the latest state of the art in numerical techniques.

Baumeister, K. J.↗

Utilizing numerical techniques in turbofan inlet acoustic suppressor design

Numerical theories in conjunction with previously published analytical results are used to augment current analytical theories in the acoustic design of a turbofan inlet nacelle. In particular, a finite element-integral theory is used to study the effect of the inlet lip radius on the far field radiation pattern and to determine the optimum impedance in an actual engine environment. For some single mode JT15D data, the numerical theory and experiment are found to be in a good agreement.

Baumeister, K. J.↗

Recent progress in numerical techniques for flow simulation

Recent developments in the use of numerical methods for fluid flow simulation show an increasing tendency to use numerical operators that can, in various ways, be factored. Use of methods having this property often increases the accuracy and efficiency of computer codes. Tracing the factorization property provides a unity to the basic concepts involved in the development of cyclic reduction, predictor-corrector, splitting, fast Fourier transform, and pseudospectral methods.-

Lomax, H.↗

Evaluation of Analytical and Numerical Techniques for Defining the Radius of Influence for an Open-Loop Ground Source Heat Pump System

In an open-loop groundwater heat pump (GHP) system, groundwater is extracted, run through a heat exchanger, and injected back into the ground, resulting in no mass balance changes to the flow system. Although the groundwater use is non-consumptive, the withdrawal and injection of groundwater may cause negative hydraulic and thermal impacts to the flow system. Because GHP is a relatively new technology and regulatory guidelines for determining environmental impacts for GHPs may not exist, consumptive use metrics may need to be used for permit applications. For consumptive use permits, a radius of influence is often used, which is defined as the radius beyond which hydraulic impacts to the system are considered negligible. In this paper, the hydraulic radius of influence concept was examined using analytical and numerical methods for a non-consumptive GHP system in southeastern Washington State. At this location, the primary hydraulic concerns were impacts to nearby contaminant plumes and a water supply well field. The results of this study showed that the analytical techniques with idealized radial flow were generally unsuited because they over predicted the influence of the well system. The numerical techniques yielded more reasonable results because they could account for aquifer heterogeneities and flow boundaries. In particular, the use of a capture zone analysis was identified as the best method for determining potential changes in current contaminant plume trajectories. The capture zone analysis is a more quantitative and reliable tool for determining the radius of influence with a greater accuracy and better insight for a non-consumptive GHP assessment.

GHPs↗

A numerical technique for the calculation of cloud optical extinction from lidar

A simple numerical algorithm which calculates optical extinction from cloud lidar data is presented. The method assumes a two-component atmosphere consisting of 'clear air' and cloud particulates. 'Clear air' may consist of either molecules only or a mix of molecules and atmospheric aerosols. For certain clouds, the method may be utilized to provide an estimate of the cloud-atmospheric parameter defined as the ratio of the cloud volume backscatter coefficient to the cloud extinction coefficient divided by the atmospheric volume backscatter coefficient at a given altitude. The cloud-atmospheric parameter may be estimated only from cloud data from which the optical thickness may reliably be used as a constraint on the numerical solution. This constraint provides the additional information necessary to obtain the cloud-atmospheric parameter. Conversely, the method may be applied to obtain cloud extinction and optical thickness from lidar cloud soundings if an estimate of the cloud-atmospheric parameter is available.

Alvarez, J. M.↗

A hybrid numerical technique for predicting the aerodynamic and acoustic fields of advanced turboprops

A hybrid numerical procedure is presented for the prediction of the aerodynamic and acoustic performance of advanced turboprops. A hybrid scheme is proposed which in principle leads to a consistent simultaneous prediction of both fields. In the inner flow a finite difference method, the Approximate-Factorization Alternating-Direction-Implicit (ADI) scheme, is used to solve the nonlinear Euler equations. In the outer flow the linearized acoustic equations are solved via a Boundary-Integral Equation (BIE) method. The two solutions are iteratively matched across a fictitious interface in the flow so as to maintain continuity. At convergence the resulting aerodynamic load prediction will automatically satisfy the appropriate free-field boundary conditions at the edge of the finite difference grid, while the acoustic predictions will reflect the back-reaction of the radiated field on the magnitude of the loading source terms, as well as refractive effects in the inner flow. The equations and logic needed to match the two solutions are developed and the computer program implementing the procedure is described. Unfortunately, no converged solutions were obtained, due to unexpectedly large running times. The reasons for this are discussed and several means to alleviate the situation are suggested.

Homicz, G. F.↗

Comparison of two numerical techniques for aerodynamic model identification

An algorithm, called the Minimal Residual QR algorithm, is presented to solve subset regression problems. It is shown that this scheme can be used as a numerically reliable implementation of the stepwise regression technique, which is widely used to identify an aerodynamic model from flight test data. This capability as well as the numerical superiority of this scheme over the stepwise regression technique is demonstrated in an experimental simulation study.

Verhaegen, M. H.↗

Field Penetration in a Rectangular Box Using Numerical Techniques: An Effort to Obtain Statistical Shielding Effectiveness

This paper emphasizes the application of numerical methods to explore the ideas related to shielding effectiveness from a statistical view. An empty rectangular box is examined using a hybrid modal/moment method. The basic computational method is presented followed by the results for single- and multiple observation points within the over-moded empty structure. The statistics of the field are obtained by using frequency stirring, borrowed from the ideas connected with reverberation chamber techniques, and extends the ideas of shielding effectiveness well into the multiple resonance regions. The study presented in this paper will address the average shielding effectiveness over a broad spatial sample within the enclosure as the frequency is varied.

Bunting, Charles F.↗

Comparison of two numerical techniques for aerodynamic model identification

A new algorithm, called the Minimal Residual QR algorithm, is presented to solve subset regression problems. It is shown that this new scheme can be used as a numerically reliable implementation of the stepwise regression technique, which is widely used to identify an aerodynamic model from flight test data. This capability as well as the numerical superiority of this scheme over the stepwise regression technique is demonstrated in an experimental simulation study.

Verhaegen, M. H.↗

Numerical techniques for solving nonlinear instability problems in smokeless tactical solid rocket motors

The selection of a satisfactory numerical method for calculating the propagation of steep fronted shock life waveforms in a solid rocket motor combustion chamber is discussed. A number of different numerical schemes were evaluated by comparing the results obtained for three problems: the shock tube problems; the linear wave equation, and nonlinear wave propagation in a closed tube. The most promising method--a combination of the Lax-Wendroff, Hybrid and Artificial Compression techniques, was incorporated into an existing nonlinear instability program. The capability of the modified program to treat steep fronted wave instabilities in low smoke tactical motors was verified by solving a number of motor test cases with disturbance amplitudes as high as 80% of the mean pressure.

Baum, J. D.↗

Comparing Three Types of Numerical Techniques for the Integration of Perturbed Satellite Motion

This project compares the computational efficiency, stability/accuracy, and precision of various numerical integration schemes to determine which is most appropriate for use in conjunction analysis of satellite orbits. Specifically, this project examines a few of the top Runge-Kutta, extrapolation, and multistep algorithms, combining both previous research in this field with new analysis to form the final conclusion. In addition, a method is proposed for using dense output to expedite orbit calculations.

97 MATHEMATICS AND COMPUTING↗

Numerical techniques for the solution of the compressible Navier-Stokes equations and implementation of turbulence models

The time-splitting explicit numerical method of MacCormack is applied to separated turbulent boundary layer flow problems. Modifications of this basic method are developed to counter difficulties associated with complicated geometry and severe numerical resolution requirements of turbulence model equations. The accuracy of solutions is investigated by comparison with exact solutions for several simple cases. Procedures are developed for modifying the basic method to improve the accuracy. Numerical solutions of high-Reynolds-number separated flows over an airfoil and shock-separated flows over a flat plate are obtained. A simple mixing length model of turbulence is used for the transonic flow past an airfoil. A nonorthogonal mesh of arbitrary configuration facilitates the description of the flow field. For the simpler geometry associated with the flat plate, a rectangular mesh is used, and solutions are obtained based on a two-equation differential model of turbulence.

Baldwin, B. S.↗

Comparison of numerical techniques for integration of stiff ordinary differential equations arising in combustion chemistry

The efficiency and accuracy of several algorithms recently developed for the efficient numerical integration of stiff ordinary differential equations are compared. The methods examined include two general-purpose codes, EPISODE and LSODE, and three codes (CHEMEQ, CREK1D, and GCKP84) developed specifically to integrate chemical kinetic rate equations. The codes are applied to two test problems drawn from combustion kinetics. The comparisons show that LSODE is the fastest code currently available for the integration of combustion kinetic rate equations. An important finding is that an interactive solution of the algebraic energy conservation equation to compute the temperature does not result in significant errors. In addition, this method is more efficient than evaluating the temperature by integrating its time derivative. Significant reductions in computational work are realized by updating the rate constants (k = at(supra N) N exp(-E/RT) only when the temperature change exceeds an amount delta T that is problem dependent. An approximate expression for the automatic evaluation of delta T is derived and is shown to result in increased efficiency.

Radhakrishnan, K.↗

The relative merits of several numerical techniques for solving the compressible Navier-Stokes equations

Four explicit finite difference techniques designed to solve the time-dependent, compressible Navier Stokes equations are compared. These techniques are: (1) MacCormack, (2) modified Du Fort-Frankel, (3) modified hopscotch, and (4) Brailovskaya. The comparison was made numerically by solving the quasi-one dimensional Navier Stokes equations for the flow in a converging-diverging nozzle. Solutions with and without standing normal shock waves were computed for unit Reynolds numbers (based on total conditions) ranging from 45374 to 2269. The results indicate that all four techniques are comparable in accuracy; however, the modified hopscotch scheme is two to three times faster than the Brailovskaya and MacCormack schemes and three to six times faster than the modified Du Fort-Frankel scheme.

Holst, T. L.↗

Dynamic analysis of a class of mixed lumped-distributed parameter systems via numerical techniques

The modeling via transfer matrices of mixed lumped-distributed parameter systems with feedback control is discussed and novel methods of obtaining information on the controlled system's dynamic response via numerical methods is presented. These methods utilize numerical searches in the complex plane for the roots of the transcendental characteristic equation to determine the closed loop system eigenvalues. The fast Fourier transform (FFT) algorithm is utilized but in the inverse fashion (from frequency domain to time domain). The information obtained is identical to that contained in a model in modal coordinates, and can be used to construct such a model. An interactive computer program to do the required calculation is described, as well as its application to a manipulator arm design problem.

Book, W. J.↗