Search NASA⌕ Search

SEARCH · Search NASA

Results for “open channel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Chronic, intermittent loading alters mechanosensitive channel characteristics in osteoblast-like cells

The effects of chronic, intermittent strain on the mechanosensitive cation (SA-cat) channels in UMR-106.01 osteoblast-like osteosarcoma cells were studied using patch-clamp techniques. Chronically strained cells demonstrated significantly larger increases in whole cell conductance when subjected to additional mechanical strain than nonstrained controls (69.0 +/- 15.1 vs. 14.1 +/- 3.1%; P < 0.001). This increase could be blocked by the SA-cat channel inhibitor, gadolinium, and corresponded to a three- to fivefold increase in SA-cat channel activity. Chronic strain increased the number of open channels in response to stretch and induced spontaneous SA-cat channel activity in 33% of the patches of strained cells. Graded increases in negative patch pressure demonstrated that SA-cat channels in chronically strained cells were activated at significantly lower levels of mechanical perturbation than nonstrained controls. These data suggest that chronic, cyclic strain reduces the activation threshold of the SA-cat channel and further strengthen our hypothesis that this channel may act as a mechanotransducer for the activation of bone remodeling by physical strain.

NASA Discipline Musculoskeletal↗
NASA NTRS1939

Combined Beam-column Stresses of Aluminum-alloy Channel Sections

The results of a research program to obtain design data on the strength of open-channel aluminum-alloy sections subjected to combined column and beam action. The results of the tests of about 70 specimens were graphed for stresses due to axial load and stresses due to bending loading as functions of length to radius of gyration of the specimens. From these graphs a design chart was derived that is suitable for ready use.

COLUMNS, ALUMINUM-ALLOY - ALCOA 24ST - STRENGTH↗
NASA NTRS2006

Hybrid MD-Nernst Planck Model of Alpha-hemolysin Conductance Properties

Motivated by experiments in which an applied electric field translocates polynucleotides through an alpha-hemolysin protein channel causing ionic current transient blockade, a hybrid simulation model is proposed to predict the conductance properties of the open channel. Time scales corresponding to ion permeation processes are reached using the Poisson-Nemst-Planck (PNP) electro-diffusion model in which both solvent and local ion concentrations are represented as a continuum. The diffusion coefficients of the ions (K(+) and Cl(-)) input in the PNP model are, however, calculated from all-atom molecular dynamics (MD). In the MD simulations, a reduced representation of the channel is used. The channel is solvated in a 1 M KCI solution, and an external electric field is applied. The pore specific diffusion coefficients for both ionic species are reduced 5-7 times in comparison to bulk values. Significant statistical variations (17-45%) of the pore-ions diffusivities are observed. Within the statistics, the ionic diffusivities remain invariable for a range of external applied voltages between 30 and 240mV. In the 2D-PNP calculations, the pore stem is approximated by a smooth cylinder of radius approx. 9A with two constriction blocks where the radius is reduced to approx. 6A. The electrostatic potential includes the contribution from the atomistic charges. The MD-PNP model shows that the atomic charges are responsible for the rectifying behaviour and for the slight anion selectivity of the a-hemolysin pore. Independent of the hierarchy between the anion and cation diffusivities, the anionic contribution to the total ionic current will dominate. The predictions of the MD-PNP model are in good agreement with experimental data and give confidence in the present approach of bridging time scales by combining a microscopic and macroscopic model.

Cozmuta, Ioana↗
NASA NTRS1987

An intercomparison technique for measuring thermal attachment cross sections and rate constants in distinct final channels

A new technique is introduced for comparing negative-ion signal rates in which a common ion is produced by dissociative attachment in a series of molecules. Measurements are carried out at electron energies less than 100 MeV and at resolutions of 6-8 MeV (FWHM). The technique is demonstrated by detection of the Cl(-) signal in CFCl3, CCl4, CF2Cl2, 1,1,2-C2Cl3F3, 1,1,1-C2Cl3F3 and C2Cl4. Measurements for 1,1,1-C2Cl3F3 show that there is a significant open channel, other than Cl(-) formation, which accounts for about 60 percent of negative-ion formation in thermal-multiple-collision (swarm) experiments. Channel cross sections and rate constants are given for the process Cl(-)/1,1,1-Cl2Cl3F3, as well as in C2Cl4, for the separate channels Cl(-)/C2Cl4 and C2Cl4(-)/C2Cl4.

Alajajian, S. H.↗
NASA NTRS2002

A large iris-like expansion of a mechanosensitive channel protein induced by membrane tension

MscL, a bacterial mechanosensitive channel of large conductance, is the first structurally characterized mechanosensor protein. Molecular models of its gating mechanisms are tested here. Disulfide crosslinking shows that M1 transmembrane alpha-helices in MscL of resting Escherichia coli are arranged similarly to those in the crystal structure of MscL from Mycobacterium tuberculosis. An expanded conformation was trapped in osmotically shocked cells by the specific bridging between Cys 20 and Cys 36 of adjacent M1 helices. These bridges stabilized the open channel. Disulfide bonds engineered between the M1 and M2 helices of adjacent subunits (Cys 32-Cys 81) do not prevent channel gating. These findings support gating models in which interactions between M1 and M2 of adjacent subunits remain unaltered while their tilts simultaneously increase. The MscL barrel, therefore, undergoes a large concerted iris-like expansion and flattening when perturbed by membrane tension.

NASA Discipline Cell Biology↗
NASA NTRS2003

A Reassessment of the Emplacement and Erosional Potential of Turbulent, Low-Viscosity Lavas on the Moon

We have reevaluated the role of thermal erosion by low-viscosity lunar lavas as a mechanism or the formation of the lunar sinuous rilles. We have adapted the model of Williams et aL and used the compositions of an Apollo 12 basalt and a terrestrial komatiitic basalt to investigate the compositional and environmental effects on the flow behavior of low-viscosity lavas on the Moon and Earth. Our model predict that lunar lava could have erupted as turbulent flows that were capable of flowing hundreds of kilometers on a sufficiently flat, unobstructed substrate. These results are consistent with previous studies. Modeling of lava over a substrate of the same composition shows that thermal erosion rates would have been low (approx. 10 cm/d). As a result, long-duration eruptions (approximately months to years) would have been required to incise deep (tens to hundreds of meters) channels. Partial melting and mechanical removal of the substrate, a mechanism suggested by Hulme to enhance erosion, only slightly increases thermal erosion rules. Other factors, such as higher flow rates or lava superheating, could have produced deep rilles by thermal erosion during shorter-duration eruption. A superheated lunar lava not only would have had a higher erosion rate (approx. 40 cm/d) but also would have remained uncrusted for tens of kilometers, which is consistent with the open channel morphology of most sinuous rilles. For lunar lavas with large volatile (t.e., vesicle) contents, the presence of vesicles would have tended to increase viscosity at low strain rates, resulting in shorter turbulent flow distances, lower thermal erosion rates, and thus shallower erosion channel depths for given eruption durations.

William, David A.↗
NASA NTRS2001

Exoskeletal Engine Concept: Feasibility Studies for Medium and Small Thrust Engines

The exoskeletal engine concept is one in which the shafts and disks are eliminated and are replaced by rotating casings that support the blades in spanwise compression. Omission of the shafts and disks leads to an open channel at the engine centerline. This has immense potential for reduced jet noise and for the accommodation of an alternative form of thruster for use in a combined cycle. The use of ceramic composite materials has the potential for significantly reduced weight as well as higher working temperatures without cooling air. The exoskeletal configuration is also a natural stepping-stone to complete counter-rotating turbomachinery. Ultimately this will lead to reductions in weight, length, parts count and improved efficiency. The feasibility studies are in three parts. Part 1: Systems and Component Requirements addressed the mechanical aspects of components from a functionality perspective. This effort laid the groundwork for preliminary design studies. Although important, it is not felt to be particularly original, and has therefore not been included in the current overview. Part 2: Preliminary Design Studies turned to some of the cycle and performance issues inherent in an exoskeletal configuration and some initial attempts at preliminary design of turbomachinery were described. Twin-spoon and single-spool 25,800-lbf-thrust turbofans were used as reference vehicles in a mid-size commercial subsonic category in addition to a single-spool 5,000-lbf-thrust turbofan that represented a general aviation application. The exoskeletal engine, with its open centerline, has tremendous potential for noise suppression and some preliminary analysis was done which began to quantify the benefits. Part 3: Additional Preliminary Design Studies revisited the design of single-spool 25,800-lbf-thrust turbofan configurations, but in addition to the original FPR = 1.6 and BPR = 5.1 reference engine. two additional configurations used FPR = 2.4 and BPR = 3.0 and FPR = 3.2 and BPR = 2.0 were investigated. The single-spool 5.000-lbf-thrust turbofan was refined and the small engine study was extended to include a 2,000-lbf-thrust turbojet. More attention was paid to optimizing the turbomachinery. Turbine cooling flows were eliminated, in keeping with the use of uncooled CMC materials in exoskeletal engines. The turbine performance parameters moved much closer to the nominal target values, demonstrating the great benefits to the cycle of uncooled turbines.

Halliwell, Ian↗
NASA NTRS2001

Exoskeletal Engine Concept: Feasibility Studies for Medium and Small Thrust Engines

The exoskeletal engine concept is one in which the shafts and disks are eliminated and are replaced by rotating casings that support the blades in spanwise compression. Omission of the shafts and disks leads to an open channel at the engine centerline. This has immense potential for reduced jet noise and for the accomodation of an alternative form of thruster for use in a combined cycle. The use of ceramic composite materials has the potential for significantly reduced weight as well as higher working temperatures without cooling air. The exoskeletal configuration is also a natural stepping-stone to complete counter-rotating turbomachinery. Ultimately this will lead to reductions in weight, length, parts count and improved efficiency. The feasibility studies are in three parts. Part I-Systems and Component Requirements addressed the mechanical aspects of components from a functionality perspective. This effort laid the groundwork for preliminary design studies. Although important, it is not felt to be particularly original, and has therefore not been included in the current overview. Part 2-Preliminary Design Studies turned to some of the cycle and performance issues inherent in an exoskeletal configuration and some initial attempts at preliminary design of turbomachinery were described. Twin-spoon and single-spool 25.800-lbf-thrust turbofans were used as reference vehicles in a mid-size commercial subsonic category in addition to a single-spool 5,000-lbf-thrust turbofan that represented a general aviation application. The exoskeletal engine, with its open centerline, has tremendous potential for noise suppression and some preliminary analysis was done which began to quantify the benefits. Part 3-Additional Preliminary Design Studies revisited the design of single-spool 25,800-lbf-thrust turbofan configurations, but in addition to the original FPR = 1.6 and BPR = 5.1 reference engine, two additional configurations used FPR = 2.4 and BPR = 3.0 and FPR = 3.2 and BPR = 2.0 were investigated. The single-spool 5,000-lbf-thrust turbofan was refined and the small engine study was extended to include a 2,000-lbf-thrust turbojet. More attention was paid to optimizing the turbomachinery. Turbine cooling flows were eliminated, in keeping with the use of uncooled CMC material in exoskeletal engines. The turbine performance parameters moved much closer to the nominal target values, demonstrating the great benefits to the cycle of uncooled turbines.

Halliwell, Ian↗
NASA NTRS1979

The lambda-scheme

A method for integrating the Euler equations of gas dynamics for compressible flows in any hyperbolic case is presented. This method is applied to the Mach number distribution over a stretch of an infinite duct having a variable cross section, and to the distribution in a channel opening into a vacuum with the Mach number equalling 1.04. An example of the ability of this method to handle two-dimensional unsteady flows is shown using the steady shock-and-isobars pattern reached asymptotically about an ablated blunt body with a free stream Mach number equalling 12. A final example is presented where the technique is applied to a three-dimensional steady supersonic flow, with a Mach number of 2 and an angle of attack of 5 deg.

Moretti, G.↗
NASA NTRS1981

Back contacts for silicon-on-ceramic solar cells

Grooved substrate exposes back surface of photovoltaic cells, allowing dopant diffusion into surface and electrical contact. When substrate is coated successively with carbon and molten silicon, polycrystalline-silicon bridges form over grooves, but leave channels open. Best adhesion results when substrate grooves run perpendicular to direction of liquid-silicon layer and are closely spaced.

Schuller, T. L.↗
NASA NTRS1979

Evaluation of the time dependent surface shear stress in turbulent flows

The time dependent surface shear stress has been evaluated using surface heat transfer measurements. For fully developed turbulent pipe and open channel water flows, and incompressible and compressible turbulent boundary layer air flows the measurements indicate the absolute magnitude of the surface shear stress fluctuations will be greater than two times the mean values. The root-mean-square shear stress fluctuations were of the order of 0.2 to 0.4 times the mean surface shear values. Due to these large surface shear stress fluctuations and the nonlinear relation between heat transfer and shear stress, a special technique has been developed to evaluate the measurements. It was found that the non-linear averaging errors for a hot film-surface shear stress gauge in a fully developed pipe flow was of the order of 10 percent at low velocities. A hot wire-surface shear stress gauge was employed for measurements of turbulent boundary layers in air.

Sandborn, V. A.↗
NASA NTRS1980

Ab initio projected-unrestricted Hartree-Fock calculation of some potential energy curves for carbonyl fluoride

Some potential energy curves for CF2O were calculated using projected-unrestricted Hartree-Fock (PUHF) theory. The calculations employed a contracted (4s 3p) Gaussian-type atomic orbital basis set. Bound states were found for the X-tilde 1A1 and 1,3A2 states while the 1,3B1 and 1,3B2 states were repulsive in the valence representation. The merits of the PUHF treatment for excited states are discussed. The results are discussed in terms of available experimental information and previous calculations with particular emphasis on the question of the photolysis channels open in the solar spectral region.

Brewer, D. A.↗
NASA NTRS1981

Fluidized bed coal combustion reactor

A fluidized bed coal reactor includes a combination nozzle-injector ash-removal unit formed by a grid of closely spaced open channels, each containing a worm screw conveyor, which function as continuous ash removal troughs. A pressurized air-coal mixture is introduced below the unit and is injected through the elongated nozzles formed by the spaces between the channels. The ash build-up in the troughs protects the worm screw conveyors as does the cooling action of the injected mixture. The ash layer and the pressure from the injectors support a fluidized flame combustion zone above the grid which heats water in boiler tubes disposed within and/or above the combustion zone and/or within the walls of the reactor.

Moynihan, P. I.↗
NASA NTRS1981

Nitridation of silicon

Silicon powders with three levels of impurities, principally Fe, were sintered in He or H2. Non-densifying mechanisms of material transport were dominant in all cases. High purity Si showed coarsening in He while particle growth was suppressed in H2. Lower purity powder coarsened in both He and H2. The same three Si powders and Si /111/ single crystal wafers were nitrided in both N2 and N2/H2 atmospheres. Hydrogen increased the degree of nitridation of all three powders and the alpha/beta ratio of the lower purity powder. Some Si3N4 whiskers and open channels through the surface nitride layer were observed in the presence of Fe, correlating with the nitridation-enhancing effects of Fe. Thermodynamic calculations showed that when SiO2 is present on the Si, addition of H2 to the nitriding atmosphere decreases the amount of SiO2 and increases the partial pressure of Si-containing vapor species, that is, Si and SiO. Large amounts of NH3 and SiH4 were also predicted to form.

Shaw, N. J.↗
NASA NTRS1983

Modeling of transient two-component flow using a four-point implicit method

The four-point, centered implicit scheme that is extensively used in open channel flow simulation is shown to be applicable to rapid and slow pressure transient problems in conduits with nearly single phase and two-phase flows. It is only necessary to choose the proper weighting factor value, theta, of the Courant number. For rapid pressure transients such as waterhammer, the implicit method can yield reasonable results with limited numerical dispersion and attenuation if theta is only slightly greater than the critical value of 0.5. For slower pressure gradients in single and two-phase flows, reasonable numerical solutions may be achieved for Courant number values as high as 20.

Wiggert, D. C.↗
NASA NTRS1986

Peristaltic Pump With a Stable Output

Proposed design for peristaltic pump decreases flow-rate change that results from loss of elasticity. Instead of tubing, new pump uses special flexible liner as pumping channel. Liner molded as single piece of flexible plastic with helical internal channels. Three rollers move around inner wall of liner, compressing channels and forcing liquid before constrictions. As rollers move on, channels open elastically, drawing in liquid from inlet port and making it available when rollers return.

Chandler, J. A.↗
NASA NTRS1985

Honeycomb panel heat pipe development for space radiators

An assessment of the honeycomb panel heat pipe concept as a moderate temperature range, low-mass, highly efficient radiator fin for the NASA Space Station is presented, based on test results for a thin-wall (0.46 mm) all-welded stainless steel sample with core depth of 63.5 mm and a hexagonal-cell size of 127.7 mm. The 0.61 x 3.05 m test segment, operating with methanol as a working fluid, exhibited a maximum heat transfer rate of 600 W at 50 C and was isothermal to within + or - 2 C almost entirely throughout the surface. Tilt testing, which comprised relocation of the heater along one edge of the panel, resulted in maximum power levels of 70 and 50 W at panel elevations of 12.7 and 25.4 mm, respectively. As-designed panel performance is predicted to be from 500 to 1000 W over the range of operating temperatures; better performance is predicted for an open-channel design.

Tanzer, H. J.↗
NASA NTRS1988

The International Space Station complex - Promise and problems

The current planning status of the International Space Station is reviewed from a NASA perspective, with a focus on aspects affecting the contributions of the international partners ESA, Japan, and Canada. The modifications implied by the shift from the previous double-keel configuration to the current phased-deployment (Block 1 - Block 2) approach are considered in detail and illustrated with drawings and a table listing the baseline assembly sequence. It is pointed out that the originally proposed non-NASA components can all be accommodated in the new configuration. The need for intermodule commonality of equipment form, fit, and function is discussed, and it is recommended that independent user boards be set up to select and coordinate experiments, and that the user boards of the partners open channels of cooperation and mutual support.

Halpern, Richard E.↗