Results for “optimal placement” — Page 2

NASA NTRS2025

Considerations for Optimal Sensor Placement for Higher Accuracy Object Localization for Urban Air Mobility

Previous research into object localization has shown that sensor placement and alignment plays an important role in achieving higher accuracy levels of the estimated location of a tracked Urban Air Mobility Vehicle. In general, a near-orthogonal intersection between the ground node observation vectors results in the highest accuracy due to a smaller overlapping uncertainty region between both. This applies to triangulation by means of ground node camera angle observations as well as trilateration by means of ground node distance measurements. However, this simple concept is not easily fulfilled with a network of a limited number of static ground nodes and a moving object to be localized. This case study performs sensitivity analyses and explores practical ways on how to achieve higher estimate accuracy levels in this context.

sensor placement↗

NASA NTRSDate not supplied

Machine Learning for Dynamic Test Sensor Placement

There are multiple different algorithms to perform modal test sensor placement optimization: effective independence, residual kinetic energy, iterative Guyan reduction, genetic algorithms, or a brute-force methodology. However, any of these methods may be computationally expensive, especially for structural models with a large number of degrees of freedom. Given the high-cost and the need to optimize the solution, modal sensor placement is a great application for machine learning (ML) algorithms. In this paper, we will apply ML algorithms to determine the optimal sensor locations for simple and complex structures. We will also discuss the benefits and drawbacks of using machine learning over other sensor placement algorithms.

Kelsey Buckles↗

NASA NTRS1987

Modified independent modal space control method for active control of flexible systems

A modified independent modal space control (MIMSC) method is developed for designing active vibration control systems for large flexible structures. The method accounts for the interaction between the controlled and residual modes. It incorporates also optimal placement procedures for selecting the optimal locations of the actuators in the structure in order to minimize the structural vibrations as well as the actuation energy. The MIMSC method relies on an important feature which is based on time sharing of a small number of actuators, in the modal space, to control effectively a large number of modes. Numerical examples are presented to illustrate the application of the method to generic flexible systems. The results obtained suggest the potential of the devised method in designing efficient active control systems for large flexible structures.

Baz, A.↗

NASA NTRS1988

Modified independent modal space control method for active control of flexible systems

A modified independent modal space control (MIMSC) method is developed for designing active vibration control systems for large flexible structures. The method accounts for the interaction between the controlled and residual modes. It incorporates also optimal placement procedures for selecting the optimal locations of the actuators in the structure in order to minimize the structural vibrations as well as the actuation energy. The MIMSC method relies on an important feature which is based on time sharing of a small number of actuators, in the modal space, to control effectively a large number of modes. Numerical examples are presented to illustrate the application of the method to generic flexible systems. The results obtained suggest the potential of the devised method in designing efficient active control systems for large flexible structures.

Baz, A.↗

NASA NTRS1989

Modified independent modal space control method for active control of flexible systems

A modified independent modal space control (MIMSC) method is developed for designing active vibration control systems for large flexible structures. The method accounts for the interaction between the controlled and residual modes. It incorporates also optimal placement procedures for selecting the optimal locations of the actuators in the structure in order to minimize the structural vibrations as well as the actuation energy. The MIMSC method relies on an important feature which is based on time sharing of a small number of actuators, in the modal space, to control effectively a large number of modes. Numerical examples are presented to illustrate the application of the method to generic flexible systems. The results obtained suggest the potential of the devised method in designing efficient active control systems for large flexible structures.

Baz, A.↗

NASA NTRS1992

On the placement of active members in adaptive truss structures for vibration control

The problem of optimal placement of active members which are used for vibration control in adaptive truss structures is investigated. The control scheme is based on the method of eigenvalue assignment as a means of shaping the transient response of the controlled adaptive structures, and the minimization of required control action is considered as the optimization criterion. To this end, a performance index which measures the control strokes of active members is formulated in an efficient way. In order to reduce the computation burden, particularly for the case where the locations of active members have to be selected from a large set of available sites, several heuristic searching schemes are proposed for obtaining the near-optimal locations. The proposed schemes significantly reduce the computational complexity of placing multiple active members to the order of that when a single active member is placed.

Lu, L.-Y.↗

NASA NTRS1992

Recent advances in multidisciplinary optimization of rotorcraft

A joint activity involving NASA and Army researchers at NASA LaRC to develop optimization procedures to improve the rotor blade design process by integrating appropriate disciplines and accounting for all of the important interactions among the disciplines is described. The disciplines involved include rotor aerodynamics, rotor dynamics, rotor structures, airframe dynamics, and acoustics. The work is focused on combining these five key disciplines in an optimization procedure capable of designing a rotor system to satisfy multidisciplinary design requirements. Fundamental to the plan is a three-phased approach. In phase 1, the disciplines of blade dynamics, blade aerodynamics, and blade structure are closely coupled while acoustics and airframe dynamics are decoupled and are accounted for as effective constraints on the design for the first three disciplines. In phase 2, acoustics is integrated with the first three disciplines. Finally, in phase 3, airframe dynamics is integrated with the other four disciplines. Representative results from work performed to date are described. These include optimal placement of tuning masses for reduction of blade vibratory shear forces, integrated aerodynamic/dynamic optimization, and integrated aerodynamic/dynamic/structural optimization. Examples of validating procedures are described.

Adelman, Howard M.↗

NASA NTRS1992

Recent advances in integrated multidisciplinary optimization of rotorcraft

A joint activity involving NASA and Army researchers at NASA LaRC to develop optimization procedures to improve the rotor blade design process by integrating appropriate disciplines and accounting for all of the important interactions among the disciplines is described. The disciplines involved include rotor aerodynamics, rotor dynamics, rotor structures, airframe dynamics, and acoustics. The work is focused on combining these five key disciplines in an optimization procedure capable of designing a rotor system to satisfy multidisciplinary design requirements. Fundamental to the plan is a three-phased approach. In phase 1, the disciplines of blade dynamics, blade aerodynamics, and blade structure are closely coupled while acoustics and airframe dynamics are decoupled and are accounted for as effective constraints on the design for the first three disciplines. In phase 2, acoustics is integrated with the first three disciplines. Finally, in phase 3, airframe dynamics is integrated with the other four disciplines. Representative results from work performed to date are described. These include optimal placement of tuning masses for reduction of blade vibratory shear forces, integrated aerodynamic/dynamic optimization, and integrated aerodynamic/dynamic/structural optimization. Examples of validating procedures are described.

Adelman, Howard M.↗

NASA NTRS1996

Balanced Placement Of Vibration Sensors And Actuators

Mathematical approach that involves Hankel singular values leads to method for estimation of optimal placement of relatively few vibration sensors and actuators in multivariable flexible structure. Approach extends and complements previous developments regarding approximate decomposition, to Hankel singular values, of singular values of controllability and observability grammian matrices of multivariable flexible structure. Mathematical constructs also described in "Designing An Approximately Balanced LQG Compensator" (NPO-19000).

Gawronski, Wodek↗

NASA NTRS1991

A mathematical basis for the design and design optimization of adaptive trusses in precision control

A mathematical basis for the optimal design of adaptive trusses to be used in supporting precision equipment is provided. The general theory of adaptive structures is introduced, and the global optimization problem of placing a limited number, q, of actuators, so as to maximally achieve precision control and provide prestress, is stated. Two serialized optimization problems, namely, optimal actuator placement for prestress and optimal actuator placement for precision control, are addressed. In the case of prestressing, the computation of a 'desired' prestress is discussed, the interaction between actuators and redundants in conveying the prestress is shown in its mathematical form, and a methodology for arriving at the optimal placement of actuators and additional redundants is discussed. With regard to precision control, an optimal placement scheme (for q actuators) for maximum 'authority' over the precision points is suggested. The results of the two serialized optimization problems are combined to give a suboptimal solution to the global optimization problem. A method for improving this suboptimal actuator placement scheme by iteration is presented.

Das, S. K.↗

NASA NTRSDate not supplied

Performance Impacts to the NASA Artemis II Trajectory Correction Burn Placement

As NASA embarks to return humans to the lunar vicinity with the upcoming Artemis II mission, the selected free return trajectory taking the crew to the Moon in the Orion spacecraft is impacted by the execution of small trajectory correction burns to ensure the spacecraft stays on course for a successful return to Earth. The placement of these nominally zero translational maneuvers must account for the crew schedule, navigation tracking constraints, spacecraft venting, thermal and communication requirements, and a host of other programmatic factors. Understanding the influence the placement of these periodic burn corrections have on the integrated GN\&C performance can provide valuable insight to mission controllers and trajectory planning processes to untangle the complex trade space considered for both baseline and contingency scenarios. This sensitivity information can also be utilized to facilitate the optimized placement of these burns. This paper utilizes several techniques to systematically generate the performance impacts to the NASA Artemis II trajectory correction burn placement and demonstrate how to derive optimized locations that make the system robust to crew activity, maneuver execution errors, navigation uncertainty, orbit insertion errors, disturbance accelerations, and other system limitations.

GN&C↗

NASA NTRS1989

Placement Of Exciters And Sensors To Measure Vibrations

Report discusses use of simulated-annealing algorithm to place exciters and sensors of vibrations at nearly optimal positions in complicated structure. Because there are generally fewer exciters and sensors than degrees of freedom in structure, optimal-placement algorithm needed to maximize value of resulting incomplete set of measurements for verification of amplitudes and frequencies of previously-computed vibrational modes.

Salama, Moktar A.↗

NASA NTRS1993

Vibration suppression for large scale adaptive truss structures using direct output feedback control

In this article, the vibration control of adaptive truss structures, where the control actuation is provided by length adjustable active members, is formulated as a direct output feedback control problem. A control method named Model Truncated Output Feedback (MTOF) is presented. The method allows the control feedback gain to be determined in a decoupled and truncated modal space in which only the critical vibration modes are retained. The on-board computation required by MTOF is minimal; thus, the method is favorable for the applications of vibration control of large scale structures. The truncation of the modal space inevitably introduces spillover effect during the control process. In this article, the effect is quantified in terms of active member locations, and it is shown that the optimal placement of active members, which minimizes the spillover effect (and thus, maximizes the control performance) can be sought. The problem of optimally selecting the locations of active members is also treated.

Lu, Lyan-Ywan↗

NASA NTRS1993

Computational issues in optimal tuning and placement of passive dampers

The effectiveness of viscous elements in introducing damping in a structure is a function of several variables including their number, their location in the structure, and their physical properties. In this paper, the optimal damper placement and tuning problem is posed to optimize these variables. Both discrete and continuous optimization problems are formulated and solved corresponding, respectively, to the problems of placement of passive elements and to the tuning of their parameters. The paper particularly emphasizes the critical computational issues resulting from the optimization formulations. Numerical results involving a lightly damped testbed structure are presented.

Chu, C. C.↗

NASA NTRS1987

Optimal checkpointing of real-time tasks

Analytical models for the design and evaluation of checkpointing of real-time tasks are developed. First, the execution of a real-time task is modeled under a common assumption of perfect coverage of on-line detection mechanisms (which is termed a basic model). Then, the model is generalized (to an extended model) to include more realistic cases, i.e., imperfect coverages of on-line detection mechanisms and acceptance tests. Finally, an optimal placement of checkpoints is determined to minimize the mean task execution time while the probability of an unreliable result (or lack of confidence) is kept below a specified level. In the basic model, it is shown that equidistant intercheckpoint intervals are optimal, whereas this is not necessarily true in the extended model. An algorithm for calculating the optimal number of checkpoints and intercheckpoint intervals is presented with some numerical examples for the extended model.

Shin, Kang G.↗

NASA NTRSDate not supplied

Proposition to Optimize Fire Stations for Wildfires

The rising trend in wildfire occurrence and severity has put a strain on wildfire management organizations by spreading out limited resources to meet increasing demand. There has been extensive prior research and data collection to determine the areas of highest risk and to predict regional wildfire damages based on historical trends. Our group aims to utilize this data to best determine fire station placement, optimizing where resources are allocated to reduce the time and investment needed to effectively mitigate wildfires. Using existing research, we are able to calculate optimal fire station locations by utilizing a single-objective facility location problem algorithm incentivized for cost reduction. Further work would be needed to refine the algorithm to accommodate for more realistic factors including access to water and roadways as well as better accounting for the costs involved, but our work serves as a proof of concept and lays the foundation for future research. Implementation of this algorithm would allow public fire planning agencies (such as CAL FIRE and Forest Service) to shift resources to where they would be most effective.

Wildfires↗

NASA NTRS1983

Convair 990 transonic flow-field simulation about the forward fuselage

A three-dimensional, viscous flow code was used to calculate the transonic flow about the forebody of the Convair CV-990 (Galileo II) research aircraft stationed at NASA Ames Research Center. The computations were used to determine the location for a differential pressure system. In addition, attitude sensor placements were verified. These instruments comprise a meteorological measurement system, which will be used for global determination of three-dimensional wind data. The code solves the thin layer form of the Reynolds-averaged Navier-Stokes equations using an implicit numerical procedure. The governing equations are written in a generalized, nonorthogonal coordinate system, and are cast in a strong conservation law form. Laminar boundary layer results are presented for free stream Mach number of 0.8 and angles of attack of zero and 2 deg. Use of this computational tool reduced the development time for the location of the sensors and aided in the optimal placement on the aircraft of these devices.

Chaussee, D. S.↗

NASA NTRS1985

Eigenvalue Placement and Stabilization by Constrained Optimization

A pole placement algorithm is proposed which uses constrained nonlinear optimization techniques on a finite dimensional model of a linear n degree of freedom system. Low order feedback control is assumed where r poles may be assigned; r being the rank of the sensor coefficient matrix. It is shown that by combining feedback control theory methods with optimization techniques, one can ensure the stability characteristics of a system, and can alter its transient response.

Decaro, S. M.↗