Search NASA⌕ Search

SEARCH · Search NASA

Results for “orbit tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Results of GEOS 3/ATS 6 satellite-to-satellite tracking orbit determination experiment

The purpose of the Geos 3/ATS 6 satellite-to-satellite tracking experiment was to develop, test, and evaluate methods of deriving orbit estimates from satellite-to-satellite tracking data. The results of the form of conventional orbit overlap tests, and a comparison of a Geos 3 orbit estimate obtained from satellite-to-satellite (SST) tracking data with an orbit estimate derived form C-band data. The method recommeded for estimating orbits from SST data is a Bayesian least squares procedure utilizing independent ranging to the relay satellite.

Argentiero, P.↗

The mass of Mars, Phobos, and Deimos, from the analysis of the Mariner 9 and Viking Orbiter tracking data

We have estimated the mass of Phobos, Deimos, and Mars using the Viking Orbiter and Mariner 9 tracking data. We divided the data into 282 arcs and sorted the data by periapse height, by inclination, and by satellite. The data were processed with the GEODYN/SOLVE orbit determination programs, which have previously been used to analyze planetary tracking data. The a priori Mars gravity field applied in this study was the 50th degree and order GMM-1 (Goddard Mars Model-1) model. The subsets of data were carefully edited to remove any arcs with close encounters of less than 500 km with either Phobos or Deimos. Whereas previous investigators have used close flybys (less than 500 km) to estimate the satellite masses, we have attempted to estimate the masses of Phobos and Deimos from multiday arcs which only included more distant encounters. The subsets of data were further edited to eliminate spurious data near solar conjunction (Nov.-Dec. 1976 and January 1979). In addition, the Viking-1 data from Oct. through Dec. 1978 were also excluded because of the low periapse altitude (as low as 232 km) and thus high sensitivity to atmospheric drag.

Smith, D. E.↗

Autonomous landmark tracking orbit determination strategy

In this paper, an orbit determination strategy is described that is fully autonomous and relies on a computer-based crater detection and identification algorithm that is suitable for both automation of the ground based navigation system and autonomous spacecraft based navigation.

landmark tracking orbit determination↗

Preliminary solutions for the lunar gravity field from analysis of lunar orbiter tracking data

Knowledge of the gravitation field, in combination with surface topography, provides one of the principal means of inferring the internal structure of a planetary body. Previous analyses of the lunar gravitational field have been based on data from the Lunar Orbiters, the Apollo subsatellites, and the low altitude passes of the Apollo spacecraft. Recently, Konopliv et al. have reanalyzed all available Lunar Orbiter and Apollo subsatellite tracking data, producing a 60th degree and order solution. In preparation for the Clementine Mission to the Moon, we have also initiated a reanalysis of the Lunar Orbiter and Apollo subsatellite data. Our reanalysis takes advantage of advanced force and measurement modeling techniques as well as modern computational facilities. We applied the least squares collocation technique which stabilizes the behavior of the solution and high degree and order. The extension of the size of the field reduces the aliasing coming from the omitted portion of the gravitational field. This is especially important for the analysis of the tracking data from the Lunar Orbiters, as the periapse heights frequently ranged from 50 to 100 km.

Lemoine, F. G.↗

The inclusion of higher degree and order gravity terms in the design of a repeat ground track orbit

Mean Orbit Elements can be chosen such that a desired ground track repeat criteria is obtained when propagating with the secular effects of a central body gravity field. If the proper initial conditions are chosen that correspond to these Mean Elements, the orbit can also be propagated with the full gravity field and form another ground track repeat pattern. Further, if the effects of other perturbative forces are compensated for, such that the ground track remains near this pattern, the central body effects can again be considered repetitive. The process of arriving at these conclusions, along with the supporting numerical simulations, are presented.

Vincent, Mark A.↗

Geosynchronous orbiter tracking by VLBI - Demonstration design

A demonstration has been designed to determine the three dimensional position of a satellite in geosynchronous earth orbit, with 5 meter accuracy, using tracking techniques based on very-long-base-line interferometry (VLBI). Two experiments are analyzed: the first uses tracking stations in California, Australia, and Guam, and the second uses stations in California, Australia, and Japan. Satellite VLBI observables are defined and measurement errors are predicted. Both experiments employ alternate observations between the satellite and extra-galactic radio sources to determine the satellite plane-of-sky position. Positional accuracy resulting from various combinations of data acquired over the satellite's orbital period is discussed. A strategy is devised for resolving integer cycle phase ambiguities, inherent in VLBI, without relying on an externally provided reference trajectory.

Border, J. S.↗

A Space Based Internet Protocol System for Sub-Orbital Tracking and Control

Personnel from the Goddard Space Flight Center Wallops Flight Facility (GSFC/WFF) in Virginia are responsible for the overall management of the NASA Sounding Rocket Program. Payloads are generally in support of NASA's Space Science Enterprise's missions and return a variety of scientific data as well as providing a reasonably economical means of conducting engineering tests for instruments and devices used on satellites and other spacecraft. The fifteen types of sounding rockets used by NASA can carry payloads of various weights to altitudes from 50 km to more than 1,300 km. Launch activities are conducted not only from established missile ranges, but also from remote locations worldwide requiring mobile tracking and command equipment to be transported and set up at considerable expense. The advent of low earth orbit (LEO) commercial communications satellites provides an opportunity to dramatically reduce tracking and control costs of launch vehicles and Unpiloted Aerial Vehicles (UAVs) by reducing or eliminating this ground infrastructure. Additionally, since data transmission is by packetized Internet Protocol (IP), data can be received and commands initiated from practically any location. A low cost Commercial Off The Shelf (COTS) system is currently under development for sounding rockets which also has application to UAVs and scientific balloons. Due to relatively low data rate (9600 baud) currently available, the system will first be used to provide GPS data for tracking and vehicle recovery. Range safety requirements for launch vehicles usually stipulate at least two independent tracking sources. Most sounding rockets flown by NASA now carry GPS receivers that output position data via the payload telemetry system to the ground station. The Flight Modem can be configured as a completely separate link thereby eliminating requirement for tracking radar. The system architecture which integrates antennas, GPS receiver, commercial satellite packet data modem, and a single board computer with custom software is described along with the technical challenges and the plan for their resolution. These include antenna development, high Doppler rates, reliability, environmental ruggedness, hand over between satellites and data security. An aggressive test plan is included which in addition to environmental testing measures bit error rate, latency and antenna patterns. Actual flight tests are planned for the near future on aircraft, long duration balloons and sounding rockets and these results as well as the current status of the project are reported.

Bull, Barton↗

On-Orbit Tracking of Sub-Sample Gain Differences in SNPP and NOAA-20 VIIRS Imagery Bands

The VIIRS instruments on board the SNPP and NOAA-20 (N20) satellites have 14 reflective solar bands covering a spectral range from 412 nm to 2250 nm. Three of these are imaging bands (I bands) with a nadir spatial resolution of 375 m and 11 are moderate resolution bands (M bands) with a resolution of 750 m. The higher resolution in the I bands is achieved by a combination of more detectors, with the I bands having twice as many detectors of half the size for every M band detector, and a higher data rate, with the I bands having two sub-samples for every sample of M band data. To ensure calibration accuracy, any systematic difference in the response of the two sub-samples needs to be monitored and corrected in the calibrated products. In this paper, we use the solar diffuser calibrations to monitor the gain differences between the two sub-samples of the I bands both as a function of time and signal level. We find gain differences of about 0.1% for I1, 0.3% for I2, and <0.1% for I3 that are mostly constant over the range of signal values available in the SD calibration. These values are mostly consistent throughout the mission for both instruments. The results are remarkably similar for the two VIIRS instruments, including a slightly out-of-family behavior seen in a few detectors. We discuss possible causes for the difference and the impact on the aggregated Earth view images.

On-orbit↗

Geosynchronous orbiter tracking by VLBI - Demonstration results

Results are presented on two experiments which were designed to demonstrate the feasibility of tracking geosynchronous satellites to an accuracy of 5 meters using Very-Long-Baseline Interferometry (VLBI). A communications relay satellite located over the mid-Pacific was observed using baselines between California, Australia and Guam Island. Differential VLBI observations between the satellite and angularly nearby extragalactic radio sources were used to measure the position of the satellite in the plane of the sky. Post-fit residuals to the adjusted trajectory were obtained which correspond to less than 10 meters in one dimension of the satellite position.

Donivan, F. F., Jr.↗

Towards Onboard Orbital Tracking of Seasonal Polar Volatiles on Mars

Current conditions on Mars support both a residual polar cap, composed mainly of water ice, and a seasonal cap, composed of CO2, which appears and disappears each winter. Kieffer and Titus characterized the recession of the seasonal south polar cap using an arctangent curve fit based on data from the Thermal Emission Spectrometer on Mars Global Surveyor [1]. They also found significant interannual deviations, at the regional scale, in the recession rate [2]. Further observations will enable the refinement of our models of polar cap evolution in both hemispheres. We have developed the Bimodal Image Temperature (BIT) Histogram Analysis method for the automated detection and tracking of the seasonal polar ice caps on Mars. It is specifically tailored for possible use onboard a spacecraft. We have evaluated BIT on uncalibrated data collected by the Thermal Emission Imaging System (THEMIS) instrument [3] on the Mars Odyssey spacecraft. In this paper, we focus on the northern seasonal cap, but our approach is directly applicable to the future analysis of the southern seasonal ice cap as well.

Wagstaff, Kiri L.↗

Ionospheric Imaging From a Low Earth Orbiter Tracking GPS

Tomographic imaging of the ionosphere is examined using singular value decomposition analysis. The interdependency of the obtainable resolution, the accuracy of the solution and the noise data is explained. A simulation is illustrated where a true 2-D ionospheric structure is generated, and a tomographic inversion of the structure is carried out. Inclusion of data taken in an occultation geometry reveals the strength that is added by these data. The effect of the ionosphere on a GPS signal as viewed by a user in space is examined. Under somewhat strong solar conditions, the absolute bending of the signal is of the order of 0.01 degrees for the L1 signal; the phase advance can be as large as 90 meters.

ionosphere↗

Small Orbital Stereo Tracking Camera Technology Development

On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well to help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

Bryan, Tom↗

Small Orbital Stereo Tracking Camera Technology Development

On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

Bryan, Tom↗

New approaches for tracking earth orbiters using modified GPS ground receivers

A Global Positioning System (GPS) flight receiver provides a means to precisely determine orbits for satellites in low to moderate altitude orbits. Above a 5000-km altitude, however, relatively few GPS satellites are visible. New approaches to orbit determination for satellites at higher altitudes could reduce DSN antenna time needed to provide navigation and orbit determination support to future missions. Modification of GPS ground receivers enables a beacon from the orbiter to be tracked simultaneously with GPS data. The orbit accuracy expected from this GPS-like tracking (GLT) technique is expected to be in the range of a few meters or better for altitudes up to 100,000 km with a global ground network. For geosynchronous satellites, however, there are unique challenges due to geometrical limitations and to the lack of strong dynamical signature in tracking data. We examine two approaches for tracking the Tracking and Data Relay Satellite System (TDRSS) geostationary orbiters. One uses GLT with a global network; the other relies on a small 'connected element' ground network with a distributed clock for short-baseline differential carrier phase (SB Delta Phi). We describe an experiment planned for late 1993, which will combine aspects of both GLT and SB Delta Phi, to demonstrate a new approach for tracking the Tracking and Data Relay Satellites (TDRSs) that offers a number of operationally convenient and attractive features. The TDRS demonstration will be in effect a proof-of-concept experiment for a new approach to tracking spacecraft which could be applied more generally to deep-space as well as near-Earth regimes.

Lichten, S. M.↗

Orbiter-orbiter and orbiter-lander tracking using same-beam interferometry

Two spacecraft orbiting Mars may be tracked simultaneously by a single earth-based antenna. Same-beam interferometric techniques, using two widely separated antennas, produce a spacecraft-spacecraft measurement in the plane of the sky, complementary to the line-of-sight Doppler information. This paper presents an overview of the same-beam interferometric measurement technique, a measurement error analysis, and examples of the application of same-beam interferometry to orbit determination. For the case of Mars Observer and the Soviet Mars '94 mission, orbit determination improvement up to an order of magnitude is found. Relative tracking between a Mars orbiter and a lander fixed on the surface of Mars is also studied. The lander location may be determined to a few meters, while the orbiter ephemeris may be determined with accuracy similar to the orbiter-orbiter case.

Folkner, W. M.↗

Tracking and orbit determination of near earth orbiting satellites using earth synchronous relay satellites

A Tracking Data Relay Satellite System (TDRSS) made up of two earth synchronous data relay satellites is proposed for the late 1970s to aid in the tracking, or take the place of ground tracking, or near-earth orbiters. Theoretical error analysis studies were conducted to evaluate the TDRSS concept of tracking user satellites. All major factors affecting orbit determination accuracy were considered in the analysis, including tracking system and dynamic modeling errors.

Bryant, W. C., Jr.↗