Search NASA⌕ Search

SEARCH · Search NASA

Results for “outer planet missions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Estimating trajectory correction requirements for multiple outer planet missions.

General approach to the problem of estimating trajectory correction requirements for multiple outer planet flyby missions when the navigation system uses onboard optical measurements made during approach to each target planet to complement the ground-based radio measurements. The accuracy and reliability of the onboard measurement system plays a critical role in sizing the trajectory correction capability required. An illustration of the combined use of radio and optical measurements is provided for the particular case of a Jupiter-Uranus-Neptune mission. Use of the statistical technique developed for computing the trajectory correction margin required to account for uncertainties in subsystem performance, permits trajectory correction savings of 100 to 20 m/sec over 'worst case' designs. This represents weight savings of about 50% of the science payload. For the example case trajectory correction requirements are estimated for two candidate optical systems and the radio alone case. The use of onboard measurements allows a trajectory correction savings of approximately 140 m/sec.

Friedman, L. D.↗

Photopolarimetry team outer planets mission definition phase

The work is reported of the Photopolarimetry Team in identifying scientific objectives for photometer/polarimeter experiments for outer planet flyby missions. A discussion of the scientific objectives which can be attained with a photometer/polarimeter experiment, and summaries of the special studies which were performed for the Photopolarimetry Team are presented along with a description of the photometer/polarimeter design which was developed for the Meteoroid Detection Team.

Source record↗

Factors Influencing Solar Electric Propulsion Vehicle Payload Delivery for Outer Planet Missions

Systems analyses were performed for missions utilizing solar electric propulsion systems to deliver payloads to outer-planet destinations. A range of mission and systems factors and their affect on the delivery capability of the solar electric propulsion system was examined. The effect of varying the destination, the trip time, the launch vehicle, and gravity-assist boundary conditions was investigated. In addition, the affects of selecting propulsion system and power systems characteristics (including primary array power variation, number of thrusters, thruster throttling mode, and thruster Isp) on delivered payload was examined.

Cupples, Michael↗

Alternate multiple-outer-planet missions using a Saturn-Jupiter flyby sequence

A study has been made of a method for providing more frequent launch opportunities for multiple-planet Grand Tour type missions to the outer solar system. A Saturn-Jupiter flyby sequence was used in the analysis to initiate the mission instead of the normal Jupiter-Saturn sequence. The Saturn-first approach is shown to yield several new launch opportunities following the 1980 cutoff date for Jupiter-first missions. Results are given for various two-planet, three-planet, and four-planet Jupiter-first and Saturn-first missions. A unique five-planet Saturn-first mission and a Saturn-Jupiter flyby which returns to earth are also discussed. Mission performance is evaluated for each flyby technique by comparing Saturn-first and Jupiter-first missions with respect to launch energy requirements, available launch windows, planetary encounter conditions, and total mission times.

Young, J. W.↗

Orbit improvement from satellite imaging data obtainable from outer planet missions.

Equations of motion are established for a dynamical system in which a spacecraft flies close to and interacts with an outer planet and one or more of its satellites. For the computation of the state and mass partials needed in a simultaneous orbit correction of n interacting bodies, a notably compact set of variational equations is derived. The above system of differential equations is integrated numerically on a computer. Spacecraft-satellite direction measurements accurate to plus or minus 10 sec were simulated along three representative trajectories (Mariner/Jupiter/Saturn 1977 missions) approaching Io, Titan, and Iapetus to within 41000, 13000, and 7000 km, respectively. The paper concludes with a brief discussion of the need for future work on the orbits of the satellites of the outer planets.

Aksnes, K.↗

Earth-based navigation capabilities for outer planet missions.

The role of new Earth-based radio metric data types and of advanced estimation algorithms in navigating an outer planet spacecraft in the vicinity of Saturn has been analyzed. The data types included in the study consist of conventional range and range-rate measurements taken from a single station and simultaneous and nearly simultaneous measurements obtained from pairs of stations during overlapping viewing periods. The utility of a third data set that is produced by explicitly differencing the simultaneous points has also been investigated. The data was processed with a conventional least squares batch filter and with a sequential filter that estimated parameters describing small stochastic accelerations (process noise) acting on the spacecraft. It was found that process noise can produce large errors in the estimates obtained from batch filtering conventional and simultaneous data, and that the only batch filtered estimates that were reliable were those obtained from differenced data. The performance of the simultaneous data in the presence of process noise is greatly improved by sequential filtering.

Hildebrand, C. E.↗

Grand Tour outer planet missions definition phase. Part 2: Minutes of meetings and official correspondence

A variety of imaging systems proposed for use aboard the Outer Planet Grand Tour Explorer are discussed and evaluated in terms of optimal resolution capability and efficient time utilization. It is pointed out that the planetary and satellite alignments at the time of encounter dictate a high degree of adaptability and versatility in order to provide sufficient image enhancement over earth-based techniques. Data compression methods are also evaluated according to the same criteria.

Belton, M. J. S.↗

Outer planet mission guidance and navigation for spinning spacecraft

The orbit determination accuracies, maneuver results, and navigation system specification for spinning Pioneer planetary probe missions are analyzed to aid in determining the feasibility of deploying probes into the atmospheres of the outer planets. Radio-only navigation suffices for a direct Saturn mission and the Jupiter flyby of a Jupiter/Uranus mission. Saturn ephemeris errors (1000 km) plus rigid entry constraints at Uranus result in very high velocity requirements (140 m/sec) on the final legs of the Saturn/Uranus and Jupiter/Uranus missions if only Earth-based tracking is employed. The capabilities of a conceptual V-slit sensor are assessed to supplement radio tracking by star/satellite observations. By processing the optical measurements with a batch filter, entry conditions at Uranus can be controlled to acceptable mission-defined levels (+ or - 3 deg) and the Saturn-Uranus leg velocity requirements can be reduced by a factor of 6 (from 139 to 23 m/sec) if nominal specified accuracies of the sensor can be realized.

Paul, C. K.↗

It Takes a Village. Collaborative Outer Planet Missions

A mission to one or both of our local Ice Giants (Uranus and Neptune) emerged as a high priority in the most recent Planetary Science Decadal Survey and was also specifically mentioned supportively in the Heliophysics Decadal Survey. In 2016, NASA convened a science definition team to study ice giant mission concepts in more detail. Uranus and Neptune represent the last remaining planetary type in our Solar System to have a dedicated orbiting mission. The case for a Uranus mission has been made eloquently in the Decadal Surveys. Here we summarize some of the major drivers that lead to enthusiastic support for an Ice Giant mission in general, and use the example of a Uranus Mission concept to illustrate opportunities such a mission might provide for cross-division collaboration and cost-sharing.

Uranus↗

Outer planets mission television subsystem optics study

An optics study was performed to establish a candidate optical system design for the proposed NASA Mariner Jupiter/Saturn 77 mission. The study was performed over the 6-month period from January through June 1972. The candidate optical system contains both a wide angle (A) and a narrow angle (B) lens. An additional feature is a transfer mirror mechanism that allows image transfer from the B lens to the vidicon initially used for the A lens. This feature adds an operational redundancy to the optical system in allowing for narrow angle viewing if the narrow angle vidicon were to fail. In this failure mode, photography in the wide angle mode would be discontinued. The structure of the candidate system consists mainly of aluminum with substructures of Invar for athermalization. The total optical system weighs (excluding vidicons) approximately 30 pounds and has overall dimensions of 26.6 by 19.5 by 12.3 inches.

Source record↗

Study of spin-scan imaging for outer planets missions: Executive summary

The development and characteristics of spin-scan imagers for interplanetary exploration are discussed. The spin-scan imaging photopolarimeter instruments of Pioneer 10 and 11 are described. In addition to the imaging function, the instruments are also used in a faint-light mode to take sky maps in both radiance and polarization. The performance of a visible-infrared spin-scan radiometer (VISSR), which operates in both visible and infrared wavelengths, is reported.

Russell, E. E.↗

Frequency standards requirements of the NASA deep space network to support outer planet missions

Navigation of Mariner spacecraft to Jupiter and beyond will require greater accuracy of positional determination than heretofore obtained if the full experimental capabilities of this type of spacecraft are to be utilized. Advanced navigational techniques which will be available by 1977 include Very Long Baseline Interferometry (VLBI), three-way Doppler tracking (sometimes called quasi-VLBI), and two-way Doppler tracking. It is shown that VLBI and quasi-VLBI methods depend on the same basic concept, and that they impose nearly the same requirements on the stability of frequency standards at the tracking stations. It is also shown how a realistic modelling of spacecraft navigational errors prevents overspecifying the requirements to frequency stability.

Fliegel, H. F.↗

Dual-spin attitude control for outer planet missions

The applicability of dual-spin technology to a Jupiter orbiter with probe mission was investigated. Basic mission and system level attitude control requirements were established and preliminary mechanization and control concepts developed. A comprehensive 18-degree-of-freedom digital simulation was utilized extensively to establish control laws, study dynamic interactions, and determined key sensitivities. Fundamental system/subsystem constraints were identified, and the applicability of dual-spin technology to a Jupiter orbiter with probe mission was validated.

Ward, R. S.↗