SEARCH · Search NASA

Results for “overlapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Overlap Preservation Using Loosely-Coupled Boundary Conditions for Body-Fitted Structured Overset Grids

Several improvements are made to overlap preservation in the automated approach to generating overset structured meshes. A loosely-coupled boundary condition (LCBC) is introduced to maintain optimal overlap for surface meshes generated from overlapping initial curves. Extension of the LCBC scheme to three-dimensional volume meshing is also presented. Test cases include various rotary wing vehicles from NASA’s Revolutionary Vertical Lift Technology (RVLT) project, and the wing-body geometry from the NASA Juncture Flow Experiment. Results demonstrate improvements in donor stencil quality from the enhanced overlap between neighboring surface and volume meshes.

TTT↗

NASA NTRSDate not supplied

Utilizing Libya-4 to Intercalibrate Overlapping Sensors in the Same Sun-Synchronous Orbit

The NASA CERES observed SW and LW broadband fluxes are utilized by the climate community for monitoring the Earth’s energy imbalance and for climate model validation. The SNPP and NOAA20 CERES instruments and associated VIIRS imagers were launched into the same 1:30 PM mean local time sun-sun-synchronous orbits as well as the future NOAA22 Libera broadband instrument and VIIRS imager. The overlapping sensor records need to be intercalibrated to enable consistent broadband fluxes and imager cloud retrievals. The overlapping satellites are typically placed a half an orbit apart, thus preventing any simultaneous nadir overpass (SNO) events required for time-matched inter-calibration strategies. A Pseudo Invariant Calibration Site (PICS), such as Libya-4, can provide overlapping sensor radiometric scaling factors without the use of SNOs. The clear-sky Libya-4 observed radiances were characterized both spectrally and angularly and corrected for atmospheric effects. The Libya-4 natural variability was found to be consistent across the CERES and VIIRS records. This fact reveals that the sensor onboard calibration anomalies are smaller than the Libya-4 natural variability. By mitigating the Libya-4 natural variability will reduce the radiometric scaling factor uncertainty needed to provide both broadband flux and cloud retrieval continuity across the overlapping sensor records.

D R Doelling↗

NASA NTRSDate not supplied

Detection and Localization of a Fold, Twist, and Overlaps within Tow-Steered Composite Panels During Autoclave Cure

Because of the anisotropic properties of carbon fiber reinforced polymer (CRFP) composites, novel layup architectures, such as tow-steering, can be used to tailor mechanical properties of the composite structure to the loading condition during use. In this work, a tow-steered composite panel was de-signed, laid up using the Integrated Structural Assembly of Advanced Com-posites (ISAAC) automated fiber placement (AFP) machine located at the NASA Langley Research Center (LaRC), and cured while simultaneously be-ing inspected using an ultrasonic inspection system operating inside the auto-clave. The composite panel contained overlaps that are intrinsic to the tow-steered design and had intentionally introduced layup defects including folds, wrinkles, splices, tow twists, foreign object debris (FOD), gaps, and additional overlaps. The inspections during the cure cycle focused on the ar-ea within the laminate containing a fold, a twist, and intrinsic overlaps. The ultrasonic inspections performed during the cure cycle were analyzed and compared to post-cure ultrasonic inspections of the entire laminate.

Composites↗

NASA NTRSDate not supplied

Detection and Localization of a Fold, Twist, and Overlaps within Tow-Steered Composite Panels During Autoclave Cure

Composites↗

NASA NTRS1992

The evaluation of partial binocular overlap on car maneuverability: A pilot study

An engineering approach to enlarge the helmet mounted display (HMD) field of view (FOV) and maintain resolution and weight by partially overlapping the binocular FOV has received renewed interest among human factors scientists. It is evident, based on the brief literature review, that any panoramic display with a binocular overlap, less than a minimum amount, annoys the viewer, degrades performance, and elicits undesirable behavior. The major finding is that across the 60 deg conditions, subjects moved their heads a greater distance (by about 5 degs on each side) than in the 180 deg condition, presumably to compensate for the lack of FOV. It is quite clear that the study, based on simple car maneuverability and two subjects, reveals differences in FOV, but nothing significant between binocular overlap levels and configurations. This tentatively indicates that some tradeoffs of binocular vision for a larger overall display FOV are acceptable.

Tsou, Brian H.↗

NASA NTRS1932

The Use of Large Valve Overlap in Scavenging a Supercharged Spark-ignition Engine Using Fuel Injection

This investigation was conducted to determine the effect of more complete scavenging on the full throttle power and the fuel consumption of a four-stroke-cycle engine. The NACA single-cylinder universal test engine equipped with both a fuel-injection system and a carburetor was used. The engine was scavenged by using a large valve overlap and maintaining a pressure in the inlet manifold of 2 inches of mercury above atmospheric. The maximum valve overlap used was 112 degrees. Tests were conducted for a range of compression ratios from 5.5 to 8.5. Except for variable speed tests, all tests were conducted at an engine speed of 1,500 r.p.m. The results of the tests show that the clearance volume of an engine can be scavenged by using a large valve overlap and about 2 to 5 inches of mercury pressure difference between the inlet and exhaust valve. With a fuel-injection system when the clearance volume was scavenged, a b.m.e.p. of over 185 pounds per square inch and a fuel consumption of 9.45 pound per brake horsepower per hour were obtained with a 6.5 compression ratio. An increase of approximately 10 pounds per square inch b.m.e.p. was obtained with a fuel-injection system over that with a carburetor.

Schey, Oscar W↗

NASA NTRS1960

Hovering Measurements for Twin-Rotor Configurations with and Without Overlap

Results of an investigation in the Langley full-scale tunnel of the hovering performance of large-scale twin-rotor-helicopter models are presented. Measurements of thrust, torque, and rotor flapping are given for overlapped (approximately 76 percent of blade radius) and nonoverlapped configurations and for two different rotor solidities. The measured performance is compared with single-rotor measurements and with available rotor theory. These tests show that the hovering performance of a single rotor and of two rotors without overlap or vertical offset are the same and hence may be calculated by single-rotor theory. These tests in conjunction with results of previous coaxial-rotor tests show that the performance of highly overlapped rotors can be reasonably predicted by available rotor theory.

Sweet, George E.↗

NASA NTRS2009

Relation of Cloud Occurrence Frequency, Overlap, and Effective Thickness Derived from CALIPSO and CloudSat Merged Cloud Vertical Profiles

A cloud frequency of occurrence matrix is generated using merged cloud vertical profile derived from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud Profiling Radar (CPR). The matrix contains vertical profiles of cloud occurrence frequency as a function of the uppermost cloud top. It is shown that the cloud fraction and uppermost cloud top vertical pro les can be related by a set of equations when the correlation distance of cloud occurrence, which is interpreted as an effective cloud thickness, is introduced. The underlying assumption in establishing the above relation is that cloud overlap approaches the random overlap with increasing distance separating cloud layers and that the probability of deviating from the random overlap decreases exponentially with distance. One month of CALIPSO and CloudSat data support these assumptions. However, the correlation distance sometimes becomes large, which might be an indication of precipitation. The cloud correlation distance is equivalent to the de-correlation distance introduced by Hogan and Illingworth [2000] when cloud fractions of both layers in a two-cloud layer system are the same.

Kato, Seiji↗

NASA NTRS2014

Finite Element Analysis of Composite Joint Configurations with Gaps and Overlaps

The goal of the current study is to identify scenarios for which thermal and moisture effects become significant in the loading of a composite structure. In the current work, a simple configuration was defined, and material properties were selected. A Fortran routine was created to automate the mesh generation process. The routine was used to create the models for the initial mesh refinement study. A combination of element length and width suitable for further studies was identified. Also, the effect of the overlap length and gap length on computed shear and through-thickness stresses along the bondline of the joints was studied for the mechanical load case. Further, the influence of neighboring gaps and overlaps on these joint stresses was studied and was found to be negligible. The results suggest that for an initial study it is sufficient to focus on one configuration with fixed overlap and gap lengths to study the effects of mechanical, thermal and moisture loading and combinations thereof on computed joint stresses

Krueger, Ronald↗

NASA NTRS2015

Structured Overlapping Grid Simulations of Contra-rotating Open Rotor Noise

Computational simulations using structured overlapping grids with the Launch Ascent and Vehicle Aerodynamics (LAVA) solver framework are presented for predicting tonal noise generated by a contra-rotating open rotor (CROR) propulsion system. A coupled Computational Fluid Dynamics (CFD) and Computational AeroAcoustics (CAA) numerical approach is applied. Three-dimensional time-accurate hybrid Reynolds Averaged Navier-Stokes/Large Eddy Simulation (RANS/LES) CFD simulations are performed in the inertial frame, including dynamic moving grids, using a higher-order accurate finite difference discretization on structured overlapping grids. A higher-order accurate free-stream preserving metric discretization with discrete enforcement of the Geometric Conservation Law (GCL) on moving curvilinear grids is used to create an accurate, efficient, and stable numerical scheme. The aeroacoustic analysis is based on a permeable surface Ffowcs Williams-Hawkings (FW-H) approach, evaluated in the frequency domain. A time-step sensitivity study was performed using only the forward row of blades to determine an adequate time-step. The numerical approach is validated against existing wind tunnel measurements.

Grid↗

NASA NTRS1981

A new CT collimator for producing two simultaneous overlapping slices from one scan

A new CT collimator is developed which is capable of producing two simultaneous successive overlapping images from a single scan. The collimator represents a modification of the standard EMI 5005 collimator achieved by alternately masking one end or portions of both ends of the X-ray detectors at a 13-mm beamwidth so that a set of 540 filtered projections is obtained for each scan which can be separated into two sets of interleaved projections corresponding to views 3 mm apart. Tests have demonstrated that the quality of the images produced from these two projections almost equals the quality of those produced by the standard collimator from two separate scans. The new collimator may thus be used to achieve a speed improvement in the generation of overlapping sections as well as a reduction in X-ray dosage.

Kwoh, Y. S.↗

NASA NTRS1986

Constructing multicomponent phase diagrams by overlapping ZPF lines

A procedure is introduced which can be used to draw isothermal sections from a multicomponent phase diagram in a matter of minutes, regardless of the diagram complexity. In the proposed method, the zero phase fraction (ZPF) lines are drawn separately for all phases existing in the system; by overlapping these ZPF lines, the desired section is obtained. Two examples - with five components and eight components - are given to illustrate the method. Regarding the second example, it is noted that although the final diagram may be altered to create discontinuities in slope at intersection points, the diagram remains unchanged from a topological standpoint. Thus, the overlapping ZPF lines supply all the information needed to construct complex diagrams. Even if many more phases and components are involved, the final diagram can be drawn with equal facility.

Gupta, H.↗

NASA NTRS1986

Lidar telescope overlap function and effects of misalignment for unstable resonator transmitter and coherent receiver

Effects of lidar telescope overlap function modeling on the accuracy of aerosol backscatter measurements are discussed. The treatment pertains primarily to a lidar arrangement which combines high sensitivity and a large degree of geometrical signal compression but places stringent requirements on the accuracy of the overlap function modeling - coherent IR lidar with noncoaxial (side-by-side) transmit and receive telescopes. A model is presented which includes an unstable resonator transmitter and accommodates both coaxial and noncoaxial arrangements, and comparison is made to experimental results including effects of misalignment.

Ancellet, G. M.↗

NASA NTRS1988

Overlapping grids for flow field calculations

Many problems in computational fluid dynamics (CFD) involve the calculation of flow fields within or around complex geometric configurations. The flow solution is computed on a computational grid. The construction of the grid is one of the major difficulties in the application of CFD to the analysis of flow about actual aircraft configurations. Due to geometric complexity, the grid has to be constructed in simple subregions and then all of these subgrids have to be pieced together to form a complete grid for the entire flow field. The entire grid, which is called a composite grid because it is formed from many parts, may have common regions. In either case, the computation of the flow field, using any numerical algorithm, will require the transfer of information between individual subgrids. The transfer of information is more difficult with overlapping grids. Algorithms have been developed and tested for automating the transfer of information between two overlapping grids.

Mastin, Charles Wayne↗

NASA NTRS1989

An Investigation of the Overlap Between the Statistical Discrete Gust and the Power Spectral Density Analysis Methods

The results of a NASA investigation of a claimed Overlap between two gust response analysis methods: the Statistical Discrete Gust (SDG) Method and the Power Spectral Density (PSD) Method are presented. The claim is that the ratio of an SDG response to the corresponding PSD response is 10.4. Analytical results presented for several different airplanes at several different flight conditions indicate that such an Overlap does appear to exist. However, the claim was not met precisely: a scatter of up to about 10 percent about the 10.4 factor can be expected.

Perry, Boyd, III↗

NASA NTRS1988

A general explicit solution of the central overlap problem

The matrix of the normal equations of a central overlapping-plate solution with general models for frame parameters and the star parameters is inverted explicitly in terms of the inverses of the matrices in the isolated systems for the frame and star parameters. This makes it possible to calculate from explicit formulas the numerical estimates of the star and frame parameters which would follow from a rigorous overlapping-plate solution. Also, the covariance matrix of the adjustment parameters are calculated.

Eichhorn, Heinrich↗

NASA NTRS1989

An investigation of the 'Overlap' between the Statistical-Discrete-Gust and the Power-Spectral-Density analysis methods

This paper presents the results of a NASA investigation of a claimed 'Overlap' between two gust response analysis methods: the Statistical Discrete Gust (SDG) method and the Power Spectral Density (PSD) method. The claim is that the ratio of an SDG response to the corresponding PSD response is 10.4. Analytical results presented in this paper for several different airplanes at several different flight conditions indicate that such an 'Overlap' does appear to exist. However, the claim was not met precisely: a scatter of up to about 10 percent about the 10.4 factor can be expected.

Perry, Boyd, III↗

NASA NTRS1990

An overlapped grid method for multigrid, finite volume/difference flow solvers: MaGGiE

The objective is to develop a domain decomposition method via overlapping/embedding the component grids, which is to be used by upwind, multi-grid, finite volume solution algorithms. A computer code, given the name MaGGiE (Multi-Geometry Grid Embedder) is developed to meet this objective. MaGGiE takes independently generated component grids as input, and automatically constructs the composite mesh and interpolation data, which can be used by the finite volume solution methods with or without multigrid convergence acceleration. Six demonstrative examples showing various aspects of the overlap technique are presented and discussed. These cases are used for developing the procedure for overlapping grids of different topologies, and to evaluate the grid connection and interpolation data for finite volume calculations on a composite mesh. Time fluxes are transferred between mesh interfaces using a trilinear interpolation procedure. Conservation losses are minimal at the interfaces using this method. The multi-grid solution algorithm, using the coaser grid connections, improves the convergence time history as compared to the solution on composite mesh without multi-gridding.

Baysal, Oktay↗