Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen diffusion and surface exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

An improved method to increase the predictive accuracy of the ECR technique

The technique of electrical conductivity relaxation (ECR) is a widely utilized method for obtaining oxygen chemical surface exchange (k) and bulk diffusion (D) coefficients for mixed ionic electronic conductors. Although the technique is conceptually simple, its practical application does not frequently produce reliably accurate values of k and D, and many examples of poor agreement can be found in the published literature. In this present paper, methods for enhancing the accuracy of the ECR technique relative to data processing are described in detail. Physically accurate determination of the actual starting time (t{sub 0}) and improved methods for data fitting of ECR measurements are discussed. To test the methods described, generated relaxation data sets are analyzed by using non-linear-least-square (NLLS) methods. The results showed that fixing t{sub 0} based on an ideally stirred reactor model improves the fitted results compared to treating t{sub 0} as a fitted parameter. Additionally, evaluation of the global minimum in the fitted error is made by analyzing multiple samples of varying thickness, which improves parameter evaluation compared to analysis of a single relaxation data set. The improved accuracy of the computed values of k and D is described in comparison to conventional methods.

Bulk diffusion coefficient↗

Boosting the performance of reversible solid oxide electrochemical cells with a novel hybrid oxygen electrode, Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ

Solid oxide electrochemical cells (SOECs) stand out as a highly promising clean energy technology that offers several benefits, showing significant potential to play a pivotal role in the transition towards a sustainable and low-carbon energy future. SOECs can efficiently convert the chemical energy stored in fuels to electricity in fuel cell mode, and produce various chemicals from abundant feedstocks (e.g., CO 2 , H 2 O) and intermittent solar/wind-based renewable electricity. Despite extensive efforts that have been devoted to designing novel materials and optimizing SOEC manufacturing processes, aiming to achieve enhanced energy efficiency, the current SOECs still suffer from poor performance, which is mainly due to the sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics. To address this challenge, in this work, we have successfully designed an in situ formed hybrid oxygen electrode material (Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ ), which significantly improves the surface oxygen exchange coefficient and bulk oxygen-ion diffusion coefficient, enhancing the OER and ORR electrocatalytic activities. Further, the SOECs equipped with this newly developed oxygen electrode achieved exceptional performance for power generation using both hydrogen and propane as the fuels. At 750 °C, a peak power density of 2.4 W cm -2 was obtained with H 2 as the fuel. Additionally, the SOECs attain unprecedented performance in steam electrolysis mode. A current density of 4.4 A cm -2 was achieved at 1.3 V and 750 °C, which represents the highest performance among all yttria-stabilized zirconia (YSZ) electrolyte-based SOECs. The SOECs also deliver remarkable stability during the accelerated stability testing, highlighting the great potential of Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ as a high-performance oxygen electrode for next generation SOECs.

08 HYDROGEN↗

Strongly enhanced incorporation of oxygen into barium titanate based multilayer ceramic capacitors using water vapor

The reoxidation of sintered BaTiO{sub 3}-based multilayer ceramic capacitors (MLCCs) is currently an empirically determined, but poorly understood, procedure. In this work, the incorporation of oxygen into BaTiO{sub 3}-based MLCCs has been studied by means of isotope exchange annealing ({sup 18}O{sub 2}/{sup 16}O{sub 2}, {sup 1}H{sub 2}{sup 18}O/{sup 1}H{sub 2}{sup 16}O or {sup 2}H{sub 2}{sup 16}O/{sup 1}H{sub 2}{sup 16}O) and subsequent determination of the isotope profiles in the solid by secondary ion mass spectrometry. Oxygen isotope profiles in the barium titanate dielectric can be described by a bulk diffusion coefficient D* and a surface exchange coefficient k*. The values obtained for k* indicate that oxygen incorporation from H{sub 2}O is much faster than from dry O{sub 2}; it thus plays the key role in the reoxidation process.

36 MATERIALS SCIENCE↗

High-Temperature 2D Optical Relaxation Visualizes Enhanced Oxygen Exchange Kinetics at Metal-Mixed Conducting Oxide Interfaces

Solid-state heterointerfaces are of interest for emergent local behavior that is distinct from either bulk parent compound. One technologically relevant example is the case of mixed ionic/electronic conductor (MIEC)–metal interfaces, which play an important role in electrochemistry. Metal–MIEC composite electrodes can demonstrate improved catalytic activity vs single-phase MIECs, improving fuel cell efficiency. Similarly, MIEC surface reaction kinetics are often evaluated using techniques that place metal current collectors in contact with the surface under evaluation, potentially altering the response vs the native surface. Here, techniques enabling direct and local in situ observation of the behavior at and around such heterointerfaces are needed. Here, we develop a spatially resolved optical transmission relaxation (2D-OTR) method providing continuous evaluation of local, high-temperature, controlled atmosphere defect kinetics across a ~1 cm2 sample area simultaneously in a contact-free manner. We apply it to observe the spatial variance of oxygen incorporation and evolution rates at ~525–620 °C, in response to step changes in oxygen partial pressure, on MIEC SrTi 0.65 Fe 0.35 O 3–x films as a function of distance from porous Pt and Au layers. Using this model geometry, we find significant enhancements in kinetics adjacent to the metals that decay over a few millimeter distance. To extract kinetic parameters, we fit the short-term optical data (initial portion of relaxations) with an exponential decay function appropriate for surface-exchange-limited kinetics, yielding apparent surface exchange coefficients (k chem ) with spatial resolution, decreasing with distance from the metal. To understand the kinetic processes governing the complete (long-term) optical relaxations, we performed COMSOL simulations, which demonstrated that a combination of laterally varying k chem and in-plane diffusion controls the observed kinetics over the full time range. Further support for spatially varying kchem comes from demonstrations of changing surface and bulk chemistry vs distance from the metal–MIEC interface, by X-ray photoelectron and optical absorption spectroscopies, respectively. Although microporous Pt and Au are not excellent electrodes in isolation, both metals exert a synergistic effect on the oxygen surface exchange rate in the presence of the mixed conducting film.

36 MATERIALS SCIENCE↗

Surface reactivity and oxygen migration in amorphous indium-gallium-zinc oxide films annealed in humid atmosphere

An isotope tracer study, i.e., {sup 18}O/{sup 16}O exchange using {sup 18}O{sub 2} and H{sub 2}{sup 18}O, was performed to determine how post-deposition annealing (PDA) affected surface reactivity and oxygen diffusivity of amorphous indium–gallium–zinc oxide (a-IGZO) films. The oxygen tracer diffusivity was very high in the bulk even at low temperatures, e.g., 200 °C, regardless of PDA and exchange conditions. In contrast, the isotope exchange rate, dominated by surface reactivity, was much lower for {sup 18}O{sub 2} than for H{sub 2}{sup 18}O. PDA in a humid atmosphere at 400 °C further suppressed the reactivity of O{sub 2} at the a-IGZO film surface, which is attributable to –OH-terminated surface formation.

36 MATERIALS SCIENCE↗

High stability SrTi 1-x Fe x O 3-δ electrodes for oxygen reduction and oxygen evolution reactions

We report that Sr(Ti 1-x Fe x )O 3-δ (STF) has recently been explored as an oxygen electrode for solid oxide electrochemical cells (SOCs). Model thin film electrode studies show oxygen surface exchange rates that generally improve with increasing Fe content when x < 0.5, and are comparable to the best Co-containing perovskite electrode materials. Recent results on porous electrodes with the specific composition Sr(Ti 0.3 Fe 0.7 )O 3-δ show excellent electrode performance and stability, but other compositions have not been tested. Here we report results for porous electrodes with a range of compositions from x = 0.5 to 0.9. The polarization resistance decreases with increasing Fe content up to x = 0.7, but increases for further increases in x. This results from the interaction of two effects – the oxygen solid state diffusion coefficient increases with increasing x, but the electrode surface area and surface oxygen exchange rate decrease due to increased sinterability and Sr surface segregation for the Fe-rich compositions. Symmetric cells showed no degradation during 1000 h life tests at 700 °C even at a current density of 1.5 A cm -2 , showing that all the STF electrode compositions worked stably in both fuel cell mode and electrolysis modes. Lastly, the excellent stability may be explained by X-ray Photoelectron Spectroscopy (XPS) results showing that the amount of surface segregated Sr did not change during the long-term testing, and by relatively low polarization resistances that help avoid electrode delamination.

36 MATERIALS SCIENCE↗

New mechanistic insight into the oxygen reduction reaction on Ruddlesden–Popper cathodes for intermediate-temperature solid oxide fuel cells

Ruddlesden–Popper (R–P) phase materials have been investigated widely as cathode candidates for IT-SOFCs. However, widespread application of R–P phase cathodes demands further improvement in electrode activity whose progress is hindered by the limited information in the oxygen reduction reaction (ORR). The ORR mechanism for the R–P phase is therefore investigated in this paper using (LaSr) 2 NiO 4±δ as an example. Accurate characterization of the surface oxygen exchange process is realized by developing thin and dense polycrystalline LSNO layers via a versatile spray-modified pressing method we invented before to avoid perceptible bulk diffusion contribution, surface enrichment and geometry complication. Hence, the governing factors of the ORR are identified as oxygen adsorption and incorporation based on the findings in reaction orders from electrochemical impedance spectroscopy (EIS), stoichiometry-related chemical capacitance and intrinsic anisotropic properties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of Cr2O3 on the O-18 Tracer Incorporation in SOFC Materials

To gain insight into the Cr poisoning mechanism at the cathode side of solid oxide fuel cells (SOFCs) with stainless steel interconnects, we conducted an investigation of the impact of Cr2O3 overlayers on oxygen diffusion in various SOFC electrolyte and cathode materials. High density Gd0.10Ce0.90O2 (GDC), Y0.15Zr0.85O2 (YSZ) and La0.6Sr0.4Co0.2Fe0.8O2 (LSCF) sintered pellets were covered with 3 to 30 nm Cr - overlayers that were subsequently oxidized, forming Cr2O3. Standard 18O tracer diffusion experiments at 800°C were performed and TOFSIMS profiling revealed a Cr2O3 thickness-dependent oxygen uptake process. The oxygen ion diffusion coefficients were found to be unaffected by the Cr2O3 overlayers, which is predictable since they are a bulk property. The extracted surface exchange coefficients however varied with Cr2O3 overlayer thickness. Solid state reaction measurements of Cr2O3 with the three materials of interest, and electronic structure considerations concerning the surface exchange, led to the conclusion that the observed oxygen uptake hindrance for LSCF and the slight increase of the surface exchange coefficient for YSZ can be attributed to the electronic properties of Cr2O3. The rate limitation of the oxygen incorporation into the materials is therefore strongly dependent on the surface electronic properties. A critical thickness of Cr2O3 was determined where the transition from decreased cathode-performance to a Cr2O3-property-governed regime occurs.

30 DIRECT ENERGY CONVERSION↗

Oxygen transport in the internal xenon plasma of a dispenser hollow cathode

Reactive gases such as oxygen and water vapor modify the surface morphology of BaO dispenser cathodes and degrade the electron emission properties. For vacuum cathodes operating at fixed temperature, the emission current drops rapidly when oxygen adsorbs on top of the low work function surface. Previous experiments have shown that plasma cathodes are more resistant to oxygen poisoning and can operate with O{sub 2} partial pressures one to two orders of magnitude higher than vacuum cathodes before the onset of poisoning occurs. Plasma cathodes used for electric thrusters are typically operated with xenon; however, gas phase barium, oxygen, and tungsten species may be found in small concentrations. The densities of these minor species are small compared with the plasma density, and thus, their presence in the discharge does not significantly alter the xenon plasma parameters. It is important, however, to consider the transport of these minor species as they may deposit on the emitter surface and affect the electron emission properties. In this work, we present the results of a material transport model used to predict oxygen fluxes to the cathode surface by solving the species conservation equations in a cathode with a 2.25 mm diameter orifice operated at a discharge current of 15 A, a Xe flow rate of 3.7 sccm, and 100 ppm of O{sub 2}. The dominant ionization process for O{sub 2} is resonant charge exchange with xenon ions. Ba is effectively recycled in the plasma; however, BaO and O{sub 2} are not. The model shows that the oxygen flux to the surface is not diffusion-limited; therefore, the high resistance to oxygen poisoning observed in plasma cathodes likely results from surface processes not considered here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Developing Novel Multifunctional Materials for High-Efficiency Electrical Energy Storage

This is the final report for the program “Developing Novel Multifunctional Materials for High-efficiency Electrical Energy Storage”, funded by The U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), and performed by University of Tennessee, from September 01, 2013 to August 31, 2018. Securing a sustainable energy economy by developing affordable and clean energy from renewable energy is a central element to the mission of DOE/NETL. To further this mission, NETL funds research and development of novel multifunctional materials that can be used for high-efficiency electrical energy storage. The main objective of this research program is to conduct fundamental and applied research that lead to successful development and demonstration of novel multifunctional materials, which can improve the efficiency and reduce the cost of hydrogen production with water electrolysis. The specific objectives of this research program include: 1) Design, fabrication and demonstration of thin/well-tunable liquid/gas diffusion layer (TT-LGDLs) with different pore morphologies, including pore sizes and pore porosities. 2) Development of comprehensive computational models of proton exchange membrane water electrolyzer cell (PEMECs) for the investigation of influence of different operating conditions and physical design parameters on its performance. 3) Surface modification of TT-LGDLs for better catalyst access and product/reactant removal, and smaller interfacial contact resistance (ICR). To achieve the above challenging goals, a multidisciplinary research team was formed to work on fundamental and applied research on the following three major technical areas: 1) Design, fabrication and demonstration of thin/well-tunable LGDLs (TT-LGDLs) by using photolithography and wet etching of thin titanium (Ti) foils. During the project period, the team has successfully fabricated TT-LGDLs with different pore morphologies, including pore sizes and pore porosities. The manufacturing steps mainly include cleaning thin Ti foil, supporting the foils, applying photoresist, patterning the photoresist with designed mask, exposing and developing, etching, removing photoresist, and lift-off and cleaning. The manufactured TT-LGDLs were characterized with optical microscopies and scanning electron microscopies. Their pore morphologies, including pore size and porosity, were derived based on advanced image process. The feasibility for scale-up manufacturing has been demonstrated. The TT-LGDLs have been successfully investigated for water splitting in PEMECs, which showing better performance than their counterparts fabricated with the traditional fiber-based materials. 2) Comprehensive computational modeling of a PEMEC. A comprehensive computational model has been successfully developed, and the influence of different operating conditions and physical design parameters on its performance has been investigated, including operating temperature, pressure, exchange current density, electrode thickness, membrane thickness, and interfacial resistance. Results obtained from the present model provide a comprehensive understanding of design parameter effects and consequently improve the design/performance in a PEMEC. 3) Surface modification of TT-LGDLs. The proposed surface modifications of TT-LGDLs by sputter coating and/ electroplating have been successfully demonstrated. It has been found that the performance of PEMECs can be improved by both methods, and the thickness of the electroplated gold thin layer has limited effects on the performance. With the help of the surface modifications, the PEMECs achieved the best ever performance compared with the public literatures. In addition to completion of the proposed method, microporous layers (MPLs) with both irregular micro and sphere nano titanium particles on novel TT-LGDLs was developed for the first time. The MPLs were fabricated by a low-temperature air spraying method, which provide a better catalyst access and product/reactant removal. In summary, under the close collaborations among the research team, all the tasks have been completed and the proposed research objectives have been fulfilled. All the technical milestones have been achieved and the project has been completed successfully. The technical breakthroughs obtained under this project provide novel LGDLs with well-tunable pore morphologies that can significantly improve the performance of water splitting and energy storage. This development can be directly used in existing and next generation energy storage and fuel systems.

08 HYDROGEN↗

Development of High Temperature/High Sensitivity Novel Chemical Resistive Sensor

The research has been focused to design, fabricate, and develop high temperature/high sensitivity novel multifunctional chemical sensors for the selective detection of fossil energy gases used in power and fuel systems. By systematically studying the physical properties of the LnBaCo 2 O 5+d (LBCO) [Ln=Pr or La] thin-films, a new concept chemical sensor based high temperature chemical resistant change has been developed for the application for the next generation highly efficient and near zero emission power generation technologies. We also discovered that the superfast chemical dynamic behavior and an ultrafast surface exchange kinetics in the highly epitaxial LBCO thin films. Furthermore, our research indicates that hydrogen can superfast diffuse in the ordered oxygen vacancy structures in the highly epitaxial LBCO thin films, which suggest that the LBCO thin film not only can be an excellent candidate for the fabrication of high temperature ultra sensitive chemical sensors and control systems for power and fuel monitoring systems, but also can be an excellent candidate for the low temperature solid oxide fuel cell anode and cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies Of Oxidation And Thermal Reduction Of The Cu(100) Surface Using Positron Annihilation Induced Auger Electron Spectroscopy

Positron annihilation induced Auger electron spectroscopy (PAES) measurements from the surface of an oxidized Cu(100) single crystal show a large increase in the intensity of the annihilation induced Cu M2,3VV Auger peak as the sample is subjected to a series of isochronal anneals in vacuum up to annealing temperature 300 deg. C. The PAES intensity then decreases monotonically as the annealing temperature is increased to {approx}550 deg. C. Experimental positron annihilation probabilities with Cu 3p and O 1s core electrons are estimated from the measured intensities of the positron annihilation induced Cu M{sub 2,3}VV and O KLL Auger transitions. PAES results are analyzed by performing calculations of positron surface states and annihilation probabilities of the surface-trapped positrons with relevant core electrons taking into account the charge redistribution at the surface and various surface structures associated with low and high oxygen coverages. The variations in atomic structure and chemical composition of the topmost layers of the oxidized Cu(100) surface are found to affect localization and spatial extent of the positron surface state wave function. The computed positron binding energy and annihilation characteristics reveal their sensitivity to charge transfer effects, atomic structure and chemical composition of the topmost layers of the oxidized Cu(100) surface. Theoretical positron annihilation probabilities with Cu 3p and O 1s core electrons computed for the oxidized Cu(100) surface are compared with experimental ones. The obtained results provide a demonstration of thermal reduction of the copper oxide surface after annealing at 300 deg. C followed by re-oxidation of the Cu(100) surface at higher annealing temperatures presumably due to diffusion of subsurface oxygen to the surface.

36 MATERIALS SCIENCE↗

Computational discovery of fast interstitial oxygen conductors

New highly oxygen-active materials may enhance many energy-related technologies by enabling efficient oxygen-ion transport at lower temperatures, for example, below ~400 °C. Interstitial oxygen conductors have the potential to realize such performance but have received far less attention than vacancy-mediated conductors. Here, in this study, we combine physically motivated structure and property descriptors, ab initio simulations and experiments to demonstrate an approach to discover new fast interstitial oxygen conductors. Multiple new families were found, which adopt completely different structures from known oxygen conductors. From these families, we synthesized and studied oxygen kinetics in La 4 Mn 5 Si 4 O 22+δ , a representative member of the perrierite/chevkinite family. We found that La 4 Mn 5 Si 4 O 22+δ has higher oxygen-ion conductivity than the widely used yttria-stabilized ZrO 2 , and among the highest surface oxygen exchange rates at the intermediate temperature of known materials. The fast oxygen kinetics is the result of simultaneously active interstitial and interstitialcy diffusion pathways. We propose that the essential features for forming an effective interstitial oxygen conductor are the availability of electrons and structural flexibility, enabling a sufficient accessible volume. This work provides a powerful approach for understanding and discovering new interstitial oxygen conductors.

36 MATERIALS SCIENCE↗

Factors controlling surface oxygen exchange in oxides

Decreasing the working temperature of solid oxide fuel cells is critical to their increased commercialization but is inhibited by the slow oxygen exchange kinetics at the cathode, which limits the overall rate of the oxygen reduction reaction. We use ab initio methods to develop a quantitative elementary reaction model of oxygen exchange in a representative cathode material, La 0.5 Sr 0.5 CoO 3-δ , and predict that under operating conditions the rate-limiting step for oxygen incorporation from O 2 gas on the stable, (001)-SrO surface is lateral (surface) diffusion of O-adatoms and oxygen surface vacancies. We predict that a high vacancy concentration on the metastable CoO 2 termination enables a vacancy-assisted O-2 dissociation that is 10 2 -10 3 times faster than the rate limiting step on the Sr-rich (La,Sr)O termination. This result implies that dramatically enhanced oxygen exchange performance could potentially be obtained by suppressing the (La,Sr)O termination and stabilizing highly active CoO 2 termination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of oxygen sorption and diffusion in the volume and on the surface of a γ-TiAl alloy

The oxygen sorption on the low-index (001), (100), and (110) surfaces of a γ-TiAl alloy is studied by the pseudopotential method with the generalized gradient approximation for the exchange-correlation functional. The most preferred sites for oxygen sorption in the bulk and on the surface of the alloy are determined. The titanium-rich octahedral site is shown to be preferred for oxygen sorption in the bulk material. The effect of the oxygen concentration on the atomic and electronic structures of the stoichiometric TiAl(100) surface is studied. It is shown that, at the first stage of oxidation, oxygen prefers to form bonds with titanium. The energy barriers for oxygen diffusion on the stoichiometric (100) surface and in the bulk of the material are calculated. The energy barriers are shown to depend substantially on the local environments of oxygen and to increase during diffusion from titanium-rich sites. The most possible mechanism of oxygen diffusion from the (100) surface to the bulk of the material is oxygen migration through tetrahedral sites.

36 MATERIALS SCIENCE↗

Macro- and microscopic properties of strontium doped indium oxide

Solid state synthesis and physical mechanisms of electrical conductivity variation in polycrystalline, strontium doped indium oxide In{sub 2}O{sub 3}:(SrO){sub x} were investigated for materials with different doping levels at different temperatures (T = 20–300 °C) and ambient atmosphere content including humidity and low pressure. Gas sensing ability of these compounds as well as the sample resistance appeared to increase by 4 and 8 orders of the magnitude, respectively, with the doping level increase from zero up to x = 10%. The conductance variation due to doping is explained by two mechanisms: acceptor-like electrical activity of Sr as a point defect and appearance of an additional phase of SrIn{sub 2}O{sub 4}. An unusual property of high level (x = 10%) doped samples is a possibility of extraordinarily large and fast oxygen exchange with ambient atmosphere at not very high temperatures (100–200 °C). This peculiarity is explained by friable structure of crystallite surface. Friable structure provides relatively fast transition of samples from high to low resistive state at the expense of high conductance of the near surface layer of the grains. Microscopic study of the electro-diffusion process at the surface of oxygen deficient samples allowed estimation of the diffusion coefficient of oxygen vacancies in the friable surface layer at room temperature as 3 × 10{sup −13} cm{sup 2}/s, which is by one order of the magnitude smaller than that known for amorphous indium oxide films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗

Two Pathways for Water Interaction with Oxygen Adatoms on TiO2(110) Surfaces

Atomic-level investigation of the interaction of H2O with a partially re-oxidized TiO2(110) has been performed at 300 K by combining scanning tunneling microscopy and density functional theory. In particular, we demonstrate that oxygen adatoms (Oa), produced during O2 exposure of reduced TiO2(110) surfaces, alter water dissociation/ recombination chemistry through two different pathways. When H2O diffuses to Oa on the same Ti row, it becomes trapped near the Oa, exchanges a proton easily to dissociate and form a pair of terminal hydroxyls (OHt) along the row, which can then readily recombine and re-dissociate many times or overcome the barrier to move away. When H2O passes along the Oa on an adjacent row, an across-row proton transfer facilitated by the bridging O atom results in spontaneous dissociation of H2O on a Ti trough leading to the formation of a stable across-row OHt pair, which after awhile can recombine and H2O diffuses away. The across-row process has not been reported previously, and it starts from a ‘‘pseudo-dissociated’’ state of water. We also show how the H2O dissociation and OHt pair statistical reformation induce an apparent along- or across-row shift of Oa as a result of the oxygen scrambling process between H2O and Oa.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗