Search NASA⌕ Search

SEARCH · Search NASA

Results for “palladium nanoparticles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Continuous caustic aqueous phase electrochemical reforming (CAPER) of ethanol for producing compressed hydrogen

Caustic Aqueous Phase Electrochemical Reforming (CAPER) of ethanol produces pure compressed H 2 at lower voltages, temperatures, and energy requirements than conventional electrolysis, while capturing carbonaceous products. The CAPER flow reactor consists of stainless steel endplates, stainless steel current collectors, and a Teflon flow field. The electrodes are prepared using commercial palladium nanoparticles on carbon support for the anode and platinum nanoparticles on carbon support for the cathode. The catalyst metal loading was 1 mgcm –2 on a 10cm 2 carbon cloth for both electrodes. Our CAPER reactor produces pure H 2 at 80bar and 80°C applying voltages at ≤0.5V. The only gas-phase product detected was H 2 and any carbonaceous products were contained in the liquid phase. The H 2 was produced with 97±4% faradaic efficiency. Further, operating at smaller electrode separation distances (4mm) and 80°C increased the current density. The highest lower heating value efficiency achieved was 28% at a flow rate of 0.05mLmin –1 and an applied voltage of 0.5V. The compressed H 2 was produced at ≤20 kWh kg –1 , which is much lower than electrolysis systems that require upwards of 50 kWh kg –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fast Grain Mapping with Sub-Nanometer Resolution Using 4D-STEM with Grain Classification by Principal Component Analysis and Non-Negative Matrix Factorization

High-throughput grain mapping with sub-nanometer spatial resolution is demonstrated using scanning nanobeam electron diffraction (also known as 4D scanning transmission electron microscopy, or 4D-STEM) combined with high-speed direct-electron detection. An electron probe size down to 0.5 nm in diameter is used and the sample investigated is a gold–palladium nanoparticle catalyst. Computational analysis of the 4D-STEM data sets is performed using a disk registration algorithm to identify the diffraction peaks followed by feature learning to map the individual grains. Two unsupervised feature learning techniques are compared: principal component analysis (PCA) and non-negative matrix factorization (NNMF). The characteristics of the PCA versus NNMF output are compared and the potential of the 4D-STEM approach for statistical analysis of grain orientations at high spatial resolution is discussed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Understanding Pore Formation in ALD Alumina Overcoats

AlO X thin films deposited by atomic layer deposition (ALD) have previously been used to increase both stability and selectivity of supported palladium catalysts and are known to develop nanoscale porosity upon heating. Furthermore, understanding the factors that affect ALD thin film porosity would enable future design of layered catalytic structures with tunable nanoscale features on industrially relevant high surface area materials. In this study, porous and nonporous aluminum oxide supports with and without palladium nanoparticles were overcoated with thin films of 2 - 7 nm AlO X by ALD deposited at temperatures of 100 °C, 200 °C and 300 °C. Hydroxyl loss and changes in surface chemistry were observed upon heating the films, and changes in surface area and pore volume of the annealed films were correlated to AlO x deposition temperature and presence of Pd. Crystallization of the overcoat to γ-Al 2 O 3 is shown to occur separately from hydroxyl loss and pore formation. A mechanistic understanding of pore formation in AlO X ALD films is obtained by reference to studies of the structural transformations accompanying the formation of transition aluminas from hydroxide precursors. Additionally, a direct and tunable correlation is established between pore development and the overall hydroxyl content of AlO X ALD coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bioorthogonal catalytic patch

The toxicity and complicated administration procedures of transition metal catalysts have hampered the applications of bioorthogonal catalysis in vivo. Here the authors fill the needles of a microneedle array patch with palladium nanoparticles deposited on titanium nanosheets and show that the device, applied locally on the skin of mouse models bearing melanoma, promotes intratumoural conversion of systemically injected caged doxorubicin into the active drug, reducing its toxicity and side effects. Bioorthogonal catalysis mediated by transition metals has inspired a new subfield of artificial chemistry complementary to enzymatic reactions, enabling the selective labelling of biomolecules or in situ synthesis of bioactive agents via non-natural processes. However, the effective deployment of bioorthogonal catalysis in vivo remains challenging, mired by the safety concerns of metal toxicity or complicated procedures to administer catalysts. Here, we describe a bioorthogonal catalytic device comprising a microneedle array patch integrated with Pd nanoparticles deposited on TiO 2 nanosheets. This device is robust and removable, and can mediate the local conversion of caged substrates into their active states in high-level living systems. In particular, we show that such a patch can promote the activation of a prodrug at subcutaneous tumour sites, restoring its parent drug's therapeutic anticancer properties. Finally, this in situ applied device potentiates local treatment efficacy and eliminates off-target prodrug activation and dose-dependent side effects in healthy organs or distant tissues.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Non-reactive facet specific adsorption as a route to remediation of chlorinated organic contaminants

The present work quantifies metal-contaminant interactions between palladium substrates and three salient chlorinated organic contaminants, namely trichloroethylene 1,3,5-trichlorobenzene (TCB), and 3,3′,4,4′-tetrachlorobiphenyl (PCB77). Given that Pd is one of the conventional catalytically active materials known for contaminant removal, maximizing catalytic efficiency through optimal adsorption dynamics reduces the cost of remediation of contaminants that are persistent water pollutants chronically affecting public health. Adsorption efficiency analyses from all-atom molecular dynamics (MD) simulations advance the understanding of reaction mechanisms available from density functional theory (DFT) calculations to an extractable feature scale that can fit the parametric design of supported metal catalytic systems and feed into high throughput catalyst selection. Data on residence time, site-specific adsorption, binding energies, packing geometries, orientation profiles, and the effect of adsorbate size show the anomalous behaviour of organic contaminant adsorption on the undercoordinated {110} surface as compared to the {111} and {100} surfaces. The intermolecular interaction within contaminants from molecular dynamics simulation exhibits refreshing results than ordinary single molecule density functional theory calculation. Since complete adsorption and dechlorination is an essential step for chlorinated organic contaminant remediation pathways, the presented profiles provide essential information for designing efficient remediation systems through facet-controlled palladium nanoparticles.

Guo, Hao↗
DOE OSTI2022

Ethanol Electrooxidation at 1–2 nm AuPd Nanoparticles

We report a systematic study of the electrocatalytic properties and stability of a series of 1–2 nm Au, Pd, and AuPd alloy nanoparticles (NPs) for the ethanol oxidation reaction (EOR). Following EOR electrocatalysis, NP sizes and compositions were characterized using aberration-corrected scanning transmission electron microscopy (ac-STEM) and energy dispersive spectroscopy (EDS). Two main findings emerge from this study. First, alloyed AuPd NPs exhibit enhanced electrocatalytic EOR activity compared to either monometallic Au or Pd NPs. Specifically, NPs having a 3:1 ratio of Au:Pd exhibit an ~8-fold increase in peak current density compared to Pd NPs, with an onset potential shifted ~200 mV more to the negative compared to Au NPs. Second, the size and composition of AuPd alloy NPs do not (within experimental error) change following 1.0 or 2.0 h chronoamperometry experiments, while monometallic Au NPs increase in size from 2 to 5 nm under the same conditions. Notably, this report demonstrates the importance of post-catalytic ac-STEM/EDS characterization for fully evaluating NP activity and stability, especially for 1–2 nm NPs that may change in size or structure during electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chemomechanical effect of reduced graphene oxide encapsulation on hydrogen storage performance of Pd nanoparticles

Primary chemomechanical impacts of confinement on hydrogen storage performance are studied using a nanolaminate structure where reduced graphene oxide (rGO) encapsulates palladium (Pd) nanoparticles. Three contributing factors are identified that can alter the reaction enthalpy: nanosizing, chemical interaction with the encapsulant, and mechanical stress induced strain from a combination of clamping force and lateral pulling force exerted on the Pd nanoparticles. The mechanical contributions are quantified by combining transmission electron microscopy, ab initio computation, and continuum elasticity theory, from which the encapsulation is found to exert an additional strain of 4.96% and 2.99% before and after hydrogen absorption, respectively, increasing the Pd and Pd hydride (PdH x ) reaction enthalpy by 1.3–2.8 kJ (mol H 2 ) -1 . The effect of the chemical interaction with rGO also raises the reaction enthalpy by up to 1.6 kJ (mol H 2 ) -1 , while the nanosizing effect decreases the reaction enthalpy. The three contributing factors to the reaction enthalpy are found to be similar in magnitude, where the net effect is in agreement with the measured enthalpy increase of 3.7 kJ (mol H 2 ) -1 from the bulk value. Hydrogen absorption kinetics and capacity also improved, which is attributed to facile nucleation of the hydrogen-rich phase enabled by the inhomogeneous strain distribution over the encapsulated PdHx nanoparticles. These results demonstrate that the chemomechanical effect can be controlled in the nanolaminate structure, providing an ideal template for tuning hydrogen storage performance.

08 HYDROGEN↗
DOE OSTI2023

A one-pot synthesis of high-density biofuels through bifunctional mesoporous zeolite-encapsulated Pd catalysts

Developing a powerful bifunctional catalyst for tandem reactions is essential to the future carbon neutrality by reducing the energy consumption in chemical industries. Herein, mesoporous zeolite-encapsulated palladium (Pd) nanoparticles (Pd@meso-ZSM-5) synthesized via emulsification-demulsification followed by a dry-gel transformation method were demonstrated to have a remarkable catalytic performance for a one-pot multiple tandem reaction of cyclic ketones (cyclopentanone, cyclohexanone) to bicyclic alkanes (bicyclopentane, bicyclohexane). Compared with supported catalysts (Pd/meso-ZSM-5) and microporous zeolite-encapsulated catalysts (Pd@ZSM-5) with a primary product of monocyclic alkane (cyclopentane, cyclohexane), Pd@meso-ZSM-5 shows much higher catalytic efficiency for the bicyclic alkanes synthesis, which was previously unattainable in the conventional two-step synthesis route. Controlled experiments and detailed characterizations show that mesoporosity provides sufficient space for the generation and diffusion of large molecular intermediates, and the intimate acid-Pd interface promotes the conversion of intermediates. As a result, this work proposes a design strategy for a mesoporous zeolite-encapsulated metal catalyst, which efficiently provides cooperative acid-hydrogenation catalysis.

09 BIOMASS FUELS↗
DOE OSTI2021

Azo(xy) vs Aniline Selectivity in Catalytic Nitroarene Reduction by Intermetallics: Experiments and Simulations

Intermetallic nanoparticles are promising catalysts in hydrogenation and fuel cell technologies. Much is known about the ability of intermetallic nanoparticles to selectively reduce nitro vs alkene, alcohol, or halide functional groups; less is known about their selectivity toward aniline vs azo or azoxy condensation products that result from the reduction of a nitro group alone. Because azo(xy)arenes bear promise as dyes, chemical stabilizers, and building blocks to functional materials but can be difficult to isolate, developing high surface area nanoparticle catalysts that display azo(xy) selectivity is desirable. To address this question, we studied a family of nanocrystalline group 10 metal (Pd, Pt)- and group 14 metal (Ge, Sn, Pb)-containing intermetallics-Pd 2 Ge, Pd 2 Sn, Pd 3 Sn 2 , Pd 3 Pb, and PtSn-in the catalytic reduction of nitroarenes. In contrast to monometallic Au, Pt, and Pd nanoparticles and "random" PdxSn1 – x nanoalloys, which are selective for aniline, nanoparticles of atomically precise intermetallic Pd 2 Ge, Pd 2 Sn, Pd 3 Sn 2 , and PtSn prefer an indirect condensation pathway and have a high selectivity for the azo(xy) products. The only exception is Pd 3 Pb, the most active among the intermetallic nanoparticles studied here, which is instead selective for aniline. Employing a novel application of molecular dynamics-based on machine learned potentials within a DeePMD framework-to heterogeneous catalysis, we are able to identify key reaction species on the different types of catalysts employed, furthering our understanding of the unique selectivity of these materials. By demonstrating how intermetallic nanoparticles can be as active yet more selective than other more traditional catalysts, this work provides new physical insights and opens new opportunities in the use of these materials in other important chemical transformations and applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Latent Representation Learning for Structural Characterization of Catalysts

Supervised machine learning-enabled mapping of the X-ray absorption near edge structure (XANES) spectra to local structural descriptors offers new methods for understanding the structure and function of working nanocatalysts. We briefly summarize a status of XANES analysis approaches by supervised machine learning methods. We present an example of an autoencoder-based, unsupervised machine learning approach for latent representation learning of XANES spectra. This new approach produces a lower-dimensional latent representation, which retains a spectrum–structure relationship that can be eventually mapped to physicochemical properties. Furthermore, the latent space of the autoencoder also provides a pathway to interpret the information content “hidden” in the X-ray absorption coefficient. Our approach (that we named latent space analysis of spectra, or LSAS) is demonstrated for the supported Pd nanoparticle catalyst studied during the formation of Pd hydride. By employing the low-dimensional representation of Pd K-edge XANES, the LSAS method was able to isolate the key factors responsible for the observed spectral changes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Entropic Control of HD Exchange Rates over Dilute Pd-in-Au Alloy Nanoparticle Catalysts

Dilute Pd-in-Au alloy catalysts are promising materials for selective hydrogenation catalysis. Extensive surface science studies have contributed mechanistic insight on the energetic aspect of hydrogen dissociation, migration and recombination on dilute alloy systems. Yet, translating these fundamental concepts to the kinetics and free energy of hydrogen dissociation on nanoparticle catalysts operating at ambient pressures and temperatures remains challenging. Here, the effect of the Pd concentration and Pd ensemble size on the catalytic activity, apparent activation energy and rate limiting process is addressed by combining experiment and theory. Experiments in a flow reactor show that a compositional change from 4 to 8 atm% Pd of the Pd-in-Au alloy catalyst leads to strong increase in activity, even exceeding the activity per Pd atom of monometallic Pd under the same conditions, albeit with an increase in apparent activation energy. First-principles calculations show that the rate and apparent activation enthalpy for HD exchange increase when increasing the Pd ensemble size from single Pd atoms to Pd trimers in a Au surface, suggesting that the ensemble size distribution shifts from mainly single Pd atoms on the 4 atm% Pd alloy to larger Pd ensembles of at least three atoms for the 8 atm% Pd/Au catalyst. The DFT studies also indicated that the rate-controlling process is different: H 2 (D 2 ) dissociation determines the rate for single atoms whereas recombination of adsorbed H and D determines the rate on Pd trimers. Both experiment and theory suggest that the increased reaction rate with increasing Pd content and ensemble size stems from an entropic driving force. Lastly, our results support hydrogen migration between Pd sites via Au and indicate that the dilute alloy design prevents the formation of subsurface hydrogen, which is crucial in achieving high selectivity in hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bond Selective Photochemistry at Metal Nanoparticle Surfaces: CO Desorption from Pt and Pd

The use of visible photon fluxes to influence catalytic reactions on metal nanoparticle surfaces has attracted attention based on observations of reaction mechanisms and selectivity not observed under equilibrium heating. These observations suggest that photon fluxes can selectively impact the rates of certain elementary steps, creating nonequilibrium energy distributions among various reaction pathways. However, quantitative studies validating these hypotheses on metal nanoparticle surfaces are lacking. Here, we examine the influence of continuous wave visible photon fluxes on the CO desorption rates from 1 to 2 nm diameter Pt and Pd nanoparticle surfaces supported on γ-Al 2 O 3 . Temperature-programmed desorption measurements quantified via diffuse reflectance infrared Fourier transform spectroscopy demonstrate that visible photon fluxes significantly enhanced the rate of CO desorption from Pt nanoparticles in a wavelength-dependent manner. 440 nm photons most efficiently promoted CO desorption from Pt nanoparticle surfaces, aligning with the excitation energy for the interfacial electronic transition within the Pt–CO bond. Conversely, visible photon fluxes had no measurable influence on CO desorption rates from Pd nanoparticle surfaces after accounting for photon-induced heating. Density functional theory calculations demonstrate that the Pt–CO bond exhibits a narrower LUMO resonance, stronger coupling between the photoexcitation and forces induced on the metal–C bond, and vibrational energy dissipation that more effectively couples to desorption as compared to Pd–CO. These results demonstrate the specificity photons provide in facilitating chemical reactions on metal nanoparticle surfaces and substantiate the idea that photon fluxes can steer processes and outcomes of catalytic reactions in ways not achievable by equilibrium heating.

desorption↗
DOE OSTI2024

Single-Atom Alloy Formation via Reaction-Driven Catalyst Restructuring

We demonstrate that single-atom alloy catalysts can be made by exposing physical mixtures of monometallic supported Cu and Pd catalysts to vinyl acetate (VA) synthesis reaction conditions. This reaction induces the formation of mobile clusters of metal diacetate species that drive extensive metal nanoparticle restructuring, leading to atomic dispersion of the precious metal, smaller nanoparticle sizes than the parent catalysts, and high activity and selectivity for both VA synthesis and ethanol dehydrogenation reactions. As a result, this approach is scalable and appears to be generalizable to other alloy catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗