Search NASA⌕ Search

SEARCH · Search NASA

Results for “partial reflections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Partial reflection data collection and processing using a small computer

Online data collection of the amplitudes of circularly polarized radio waves, partially reflected from the D region of the earth's ionosphere, has enabled the calculation of an electron-density profile in the height region 60-90 km. A PDP 15/30 digital computer with an analog to digital converter and magnetic tape as an intermediary storage device are used. The computer configuration, the software developed, and the preliminary results are described.

Birley, M. H.↗

Measurement of D-region electron density by partial reflections

Measurements of electron density in the lower ionosphere were made at White Sands Missile Range throughout the STRATCOM VIII launch day using a partial-reflection sounder. Information regarding the sounder's antenna pattern was gained from the passage of the balloon over the array.

Olsen, R. O.↗

Partial Reflection D-region Electron Densities

The differential absorption technique of measuring electron densities as a function of height in the D region is discussed. In the basic experiment, pulses of medium or high frequency, usually at a fixed frequency (2 to MHz), are radiated upwards with known wave polarizatin (usually linear or circular) from a transmitter at ground level. Partial reflections, from ionospheric scatterers at heights below the E region, are received at the ground, and are resolved into two characteristic components, the ordinary (0) and extraordinary (E) modes whose amplitude ration A(x)/A(o) is then measured as a function of height, h. The heights of these are determined by delay times, the group retardation being minimal in the undisturbed D-region. The electronic system can be very simple. Power splitters and quadrature networks to separate the A(x) and A(o) components are commercially available at low prices and an A-D converter, height-gate system, and microcomputer allows the real-time calculation of mean amplitudes. The ratio of the coefficients of reflection of the two modes, as they originate at each reflection height is then calculable.

Manson, A. H.↗

Partial reflection experiment

Increasing pulse repetition rate of transmitter to meet system gain requirements for partial ionospheric reflection sounder

POWER GAIN↗

Plasma sheath and presheath development near a partially reflective surface

This work addresses one-dimensional evolution of a collisionless plasma next to a solid surface that is immersed into the plasma instantaneously. In particular, we consider how the self-similar rarefaction wave establishes dynamically and how the electron reflection from the surface modifies the structure of the rarefaction wave and the Debye sheath. Here, we demonstrate that a sufficiently strong reflection eliminates the Debye sheath and changes the wall potential and the plasma flow parameters significantly. The paper presents numerical results that illustrate the developed analytical theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Partially-Reflected Water-Moderated Square-Pitched U(6.90)O 2 Fuel Rod Lattices with 0.52 Fuel to Water Volume Ratio (0.855 CM Pitch)

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5 % 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90 %)0 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMP-THERM-096, and LEU-COMP-THERM-097.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Differential phase shift of partially reflected radio waves.

The addition of phase difference measurements to differential absorption experiments is shown to be both feasible and desirable. The phase information can provide a more sensitive measurement of electron density above about 75 km. The differential phase shift is only weakly dependent on collision frequency in this range, and so an accurate collision frequency profile is not a prerequisite. The differential phase shift and differential absorption measurements taken together can provide both electron density and collision frequency data from about 70 to 90 km.

Connolly, D. J.↗

Partial reflection

Differential-absorption electron concentration and drifts wind data were collected on a daily basis along with daily winds data. The daily winds data are compared with the daily electron concentration data on the meridional prevailing wind are compared with the electron concentration. Results are briefly discussed.

Source record↗

Lineshape Distortions in Internal Reflection Two-Dimensional Infrared Spectroscopy: Tuning across the Critical Angle

Reflection mode two-dimensional infrared spectroscopy (R-2DIR) has recently emerged as a tool that expands the utility of ultrafast IR spectroscopy toward a broader class of materials. The impact of experimental configurations on the potential distortions of the transient reflectance (TR) spectra has not been fully explored, particularly in the vicinity of the critical angle θ c and through the crossover from total internal reflection to partial reflection. Here we study the impact on the spectral lineshape of a dilute bulk solution as θ c is varied across the incident angle by tuning the refractive index of the solvent. We demonstrate the significance of several distortions, including the appearance of phase twisted lineshapes and apparent changes in the spectral inhomogeneity, and show how these distortions impact the interpretation of the TR and R-2DIR spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpretation of radar returns from the mesosphere, part 2.3A

The study of VHF radar signals from the mesosphere has shown that neutral atmosphere turbulence plays a central role in generating the refractive index irregularities that backscatter the radio waves. It follows that an increase in the turbulent energy dissipation rate will result in a decrease in signal correlation time and an increase in scattered signal power. Thus, in turbulence-generated radar echoes a negative correlation between echo power and signal correlation time (P/C) is expected. P/C also changes as a function of altitude, i.e., it is negative in the upper mesosphere but largely positive in the lower, with the latter thought to be a manifestation of partial reflection from stratified layers of refractive index gradient. Partial reflection would also explain the vertical aspect sensitivity of the scattered signal in the lower mesosphere.

Royrvik, O.↗

Relationship of isolated turbulent regions to the general turbulent background, part 4.4A

The atmosphere below 100 km is often referred to as the homosphere; the region above, the heterosphere. In the homosphere, constitutents are mixed, and average molecular weight is constant. In the heterosphere, diffusive separation occurs, and species tend to fractionate; average molecular weight decreases with height. Mixing in the homosphere has its source dynamical (wind) energy. Against this background turbulence, intermittent enhancements of turbulent intensity are observed. Some of these enhancements are long lived -- for example, a turbulent layer at approximately 86 km altitude seems to be almost a permanent feature of the (global) daytime D region, as oserved by partial reflection. This may well be a delineation of the mesopause level, since long-term radio meteor studies have shown approx. 85 km to be the breakpoint between thermospheric circulation above, and mesospheric circulation below. The use of stratosphere-troposphere (ST) radars in the lower atmosphere, and mesosphere-stratosphere-troposphere (MST) and partial-reflection radars in the mesosphere for height/time profiles of turbulent intensity is discussed.

Roper, R. G.↗

Radar echoes at 2.66 and 40.92 MHz from the mesosphere, part 2.6A

During recent decades, the ionospheric D region has been scanned extensively by radar in the frequency range from 1 to 60 MHz. Progress has been made in understanding the reflection/scattering of radio waves in that area. Rocket measurement of ion density irregularities were compared to radar echo observations at 2.75 MHz with the conclusion that the received radar signal was due to scattering from isotropic and homogeneous turbulence in the altitude region between 70 and 95 km. However, scattering cross sections at 2 and 6 mHz suggest that the radar echo from the region below 80 km is in part due to partial reflection from stratified layers. The VHF scattering cross section is aspect sensitive in the D region below about 75 km and tends to be isotropic at higher altitudes. Positive correlations between scattered signal power and signal correlation time (P/C) have been observed by VHF radars in the lower mesosphere, with the conclusion that it might be an additional indication of partial reflection from stratified layers. In the upper mesosphere where the P/C correlation is negative, it is generally believed that the scattering is caused by isotropic turbulence. Radar echoes at the 2.16 and 40.92 MHz ranges are compared, assuming that both result from turbulent scatter. Adjusting the radar Bragg wavelength, it was found that both sets are due to scattering from the same layer of turbulence-generated irregularities.

Royrvik, O.↗

Range gate dependence of specular echoes

Some controversy has surrounded the interpretation of the enhancement of VHF radar echoes at vertical incidence (also known as partial reflections, specular reflections and Fresnel scattering) since they were reported by the Sunset and the SOUSY radars. There is little doubt as to the observational fact of this enhancement since it was observed by experimenters using at least eleven MST or ST radars. In addition to the Sunset and SOUSY radars, this result was obtained in the lower atmosphere at the Platteville, Poker Flat, Jicamarca Arecibo radars as well as the three radars of the ALPEX experiments. In the upper atmosphere, specular or partial reflections were observed. These vertical enhancements were associated with increases in the static stability of the atmosphere, with a temperature gradient in the stratosphere, were used to monitor the height of the tropopause, and were associated with the passage of fronts.

Green, J. L.↗

CUPRI observations of PMSE during Salvo B of NLC-91: Evidence of both partial relfection and turbulent scatter

During the first rocket sequence (called Salvo B) of the NLC-91 campaign, the Cornell University Portable Radar Interferometer (CUPRI) observed two simultaneously occurring layers of Polar Mesophere Summer Echoes (PMSE). during the time of the Turbo B flight, the high time-resolution CUPRI Doppler spectra exhibited sawtooth-like discontinuities in the lower layer which we interpret to be a distorted partial reflection layer which was advected across the radar beam. The upper layer, on the other hand, appeared to be caused by turbulent scatter and we estimate the turbulence energy dissipation rate in the upper layer at the time of the Turbo B flight to have been approximately 0.04 W/kg. Futhermore, a shift in the antenna beam direction from vertical to 8 deg off zenith revealed an aspect sensitivity of approximately 5 dB in the lower layer but none in the upper layer. We conclude that, at this particular time, turbulent scatter was responsible for the upper layer while some form of partial reflection was dominant in the lower layer.

Cho, John Y. N.↗

Multiple-wavelength tunable laser

A tunable laser includes dispersion optics for separating generated laser pulses into first and second wavelength pulses directed along first and second optical paths. First and second reflective mirrors are disposed in the first and second optical paths, respectively. The laser's output mirror is partially reflective and partially transmissive with respect to the first wavelength and the second wavelength in accordance with provided criteria. A first resonator length is defined between the output mirror and the first mirror, while a second resonator length is defined between the output mirror and the second mirror. The second resonator length is a function of the first resonator length.

Barnes, Norman P.↗