Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance proxy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Exploring dynamic load imbalance solutions with the CoMD proxy application

Proxy applications are developed to simplify studying parallel performance of scientific simulations and to test potential solutions for performance problems. However, proxy applications are typically too simple to allow work migration or to represent the load imbalance of their parent applications. To study the ability of load balancing solutions to balance work effectively, we enable work migration in one of the Exascale Co-design Center for Materials in Extreme Environments (ExMatEx) [1] applications, CoMD. We design a methodology to parameterize three key aspects necessary for studying load imbalance correction: (1) the granularity with which work can be migrated; (2) the initial load imbalance; (3) the dynamic load imbalance (how quickly the load changes over time). Finally, we present a study of the impact of flexibility in work migration in CoMD on load balance and the associated rebalancing costs for a wide range of initial and dynamic load imbalance scenarios.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Materials loss measurements using superconducting microwave resonators

The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.

47 OTHER INSTRUMENTATION↗
DOE OSTI2014

POLAR NETWORK INDEX AS A MAGNETIC PROXY FOR THE SOLAR CYCLE STUDIES

The Sun has a polar magnetic field which oscillates with the 11 yr sunspot cycle. This polar magnetic field is an important component of the dynamo process which operates in the solar convection zone and produces the sunspot cycle. We have direct systematic measurements of the Sun's polar magnetic field only from about the mid-1970s. There are, however, indirect proxies which give us information about this field at earlier times. The Ca-K spectroheliograms taken at the Kodaikanal Solar Observatory during 1904-2007 have now been digitized with 4k × 4k CCD and have higher resolution (∼0.86 arcsec) than the other available historical data sets. From these Ca-K spectroheliograms, we have developed a completely new proxy (polar network index, hereafter PNI) for the Sun's polar magnetic field. We calculate PNI from the digitized images using an automated algorithm and calibrate our measured PNI against the polar field as measured by the Wilcox Solar Observatory for the period 1976-1990. This calibration allows us to estimate the polar fields for the earlier period up to 1904. The dynamo calculations performed with this proxy as input data reproduce reasonably well the Sun's magnetic behavior for the past century.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Machine learning for analysis of atomic spectral data

Physics based forward models are the basis on which many experimental diagnostics are interpreted. For some diagnostics, models can be computationally expensive which precludes their use in real time analysis. Reduced models have the potential to capture sufficient physics thereby enabling the desired real time analysis. Using statistical inference and machine learning techniques the application of reduced models for inversion of atomic spectral data used to diagnose magnetic fields in a plasma will be examined. Two approaches are considered, (a) a reduction of the forward model where traditional inversion can be performed on the proxy model, and (b) a reduction of the direct inverse where parameters are a function of measured signal. The resulting inversion is sufficiently fast to be utilized in an online context for digital twinning, and ultimately real-time prediction, design, and control of plasma systems, such as tokamaks. Furthermore, these methods will be demonstrated on both simulated and experimentally measured data.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Improved Prediction of Cold-Air Pools in the Weather Research and Forecasting Model Using a Truly Horizontal Diffusion Scheme for Potential Temperature

The terrain-following vertical coordinate system used by many atmospheric models, including the Weather Research and Forecasting (WRF) Model, is prone to errors in regions of complex terrain. These errors stem, in part, from the calculation of horizontal gradients within the diffusion term of the momentum or scalar evolution equations. In WRF, such gradients can be calculated along coordinate surfaces, or using metric terms that help account for grid skewness. However, neither of these options ensures a truly horizontal gradient calculation, especially if a grid cell is skewed enough that the heights of the neighboring grid points used in the calculation fall outside the vertical range of the cell. In this work, an improved scheme that uses Taylor series approximations to vertically interpolate variables to the level necessary for a truly horizontal gradient calculation is implemented in WRF for the diffusion of potential temperature. The scheme is validated using an atmosphere-at-rest configuration, in which spurious flows develop only as a result of numerical errors and can thus be used as a proxy for model performance. Following validation, the method is applied to the simulation of cold-air pools (CAPs), which occur in regions of complex terrain and are characterized by strong near-surface temperature gradients. Using the truly horizontal scheme, idealized simulations demonstrate reduced numerical mixing in a quiescent CAP, and a realistic case study in the Columbia River basin shows a reduction in positive wind speed bias by up to roughly 20% compared to observations from the Second Wind Forecast Improvement Project.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

ATOMISTIC CHARACTERIZATION OF METAL-ORGANIC FRAMEWORKS FOR SUB-AMBIENT PRESSURE SWING ADSORPTION OF POST-COMBUSTION CO2 CAPTURE AND SEPARATION

Developing cost-effective and less energy-intensive carbon capture processes for dilute CO2 sources is of high interest. Adsorption-based CO2 capture such as pressure swing adsorption (PSA) is one promising approach to this challenge. PSA and other cyclic adsorption processes are materials-enabled separations that use porous adsorbents, including metal-organic frameworks (MOFs). This thesis examines post-combustion carbon capture in sub-ambient PSA, a potential route to an effective adsorption process, using MOF materials via molecular modeling. We first estimated the reproducibility of CO2 adsorption isotherm measurements in MOFs via literature meta-analysis. This chapter provides a comprehensive summary of the state of knowledge regarding CO2 adsorption in MOFs and its implications for molecular modeling of adsorption in MOFs. We then examined the upper bounds on CO2 swing capacity in sub-ambient PSA by Grand Canonical Monte Carlo (GCMC) simulation of an extensive collection of MOFs. A wide variety of MOFs was found to have swing capacity exceeding 10 mol/kg at sub-ambient temperatures provided that MOFs are appropriately selected based on their physical properties. We also assessed the capability of simple proxies for adsorbent performance and approximate models of cyclic adsorption to predict the outcomes of detailed process models of adsorption-based CO2 capture processes. To this end, we discuss the correlations between predictions from the simpler models and detailed process models. As a separate contribution, molecular modeling of chemical warfare agents (CWAs) adsorption in MOFs was analyzed. Molecular models of adsorption of CO2, CWAs or other molecules typically employ a rigid framework approximation for computational convenience. All real frameworks including MOFs, however, have intrinsic flexibility due to thermal vibrations. We examine the implications of this simple observation for quantitative predictions of the properties of adsorbed CWAs.

Park, Jongwoo↗
DOE OSTI2020

ASNF Engineering Scale Drying Experiment Acceptance Criteria for Fabricated Items

This document specifies the acceptance criteria for items fabricated by Holtec International under the scope of INL Contract # 215725, consistent with the parameters described in INL/EXT-19-56017, Aluminum-clad Spent Nuclear Fuel Engineering Scale Drying Experiment Design. Verification is confirmed with initials (or the need for remediation may be identified) along with the date of inspection for each requirement. Verification may be performed by independent proxy (University of South Carolina participant, under INL Contract Number 207046) or by an INL employee, remotely by camera images.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Integrating ORNL’s HPC and Neutron Facilities with a Performance-Portable CPU/GPU Ecosystem

We explore the development of a performance-portable CPU/GPU ecosystem to integrate two of the US Department of Energy’s (DOE’s) largest scientific instruments, the Oak Ridge Leadership Computing facility and the Spallation Neutron Source (SNS), both of which are housed at Oak Ridge National Laboratory. We select a relevant data reduction workflow use-case to obtain the differential scattering cross-section from data collected by SNS’s CORELLI and TOPAZ instruments. We compare the current CPU-only production implementation using the Garnet Python multiprocess package based on the Mantid C++ framework against our proposed CPU/GPU implementation that uses the LLVM-based, just-in-time Julia scientific language and the JACC.jl performance-portable package. Two proxy apps were developed: (i) an app for extracting relevant Mantid kernels (MDNorm) in C++ and (ii) the Julia MiniVATES.jl miniapp. We present performance results for NVIDIA A100 and AMD MI100 GPUs and AMD EPYC 7513 and 7662 CPUs. The results provide insights for future generations of data reduction software that can embrace performance portability for an integrated research infrastructure across DOE’s experimental and computational facilities.

Hahn, Steven↗
DOE OSTI2016

An overview of uncertainty quantification techniques with application to oceanic and oil‐spill simulations

Abstract We give an overview of four different ensemble‐based techniques for uncertainty quantification and illustrate their application in the context of oil plume simulations. These techniques share the common paradigm of constructing a model proxy that efficiently captures the functional dependence of the model output on uncertain model inputs. This proxy is then used to explore the space of uncertain inputs using a large number of samples, so that reliable estimates of the model's output statistics can be calculated. Three of these techniques use polynomial chaos (PC) expansions to construct the model proxy, but they differ in their approach to determining the expansions' coefficients; the fourth technique uses Gaussian Process Regression (GPR). An integral plume model for simulating the Deepwater Horizon oil‐gas blowout provides examples for illustrating the different techniques. A Monte Carlo ensemble of 50,000 model simulations is used for gauging the performance of the different proxies. The examples illustrate how regression‐based techniques can outperform projection‐based techniques when the model output is noisy. They also demonstrate that robust uncertainty analysis can be performed at a fraction of the cost of the Monte Carlo calculation.

Iskandarani, Mohamed↗
DOE OSTI2021

Predictive Proxies of Present and Future Lightning in a Superparameterized Model

Abstract A superparameterized climate model is used to assess the global performance of several previously proposed proxies for lightning. In particular, predictors incorporating hydrometeor (ice, graupel) profiles and convective vertical velocities are compared to observations, then used to estimate changes in flash rates with global warming. The choice of microphysics parameterization is also investigated, with all predictors showing higher correlations with Lightning Imaging Sensor/Optical Transient Detector observations when using a 2‐moment scheme compared to a 1‐moment representation. All proxies generally agree in their response to warming over tropical land, with notable decreases in Africa, the Middle East, and northern South America, but disagree over oceans and the midlatitudes. The product of convective available potential energy and precipitation predicts increases over these latter areas, as do the 2‐moment ice‐based proxies, while those of the 1‐moment model tend to show decreases, highlighting the importance of cloud microphysics when using climate models to simulate lightning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

ObstacleSense: Low-Power Neuromorphic Vision for Corridor Obstacle Awareness in Low-Level ADAS

The automotive industry’s pursuit of Level 5 autonomy is constrained by substantial perception-compute power requirements, often reaching 1, 000 + watts in full autonomy stacks. Reducing this energy burden requires rethinking perception not only at the high-end autonomy level, but also at the foundational Advanced Driver Assistance Systems (ADAS) level where low-power, safety-critical sensing can have broad impact. Neuromorphic vision provides a promising starting point: HD Dynamic Vision Sensors (DVS) can operate below 100 mW at the sensor level by reporting only asynchronous brightness changes. However, low-power sensing alone is insufficient if downstream perception reintroduces dense, energy-intensive computation. In particular, many event-driven object-detection pipelines still rely on CNN backbones, while purely spiking alternatives often trade away accuracy or ignore deployment constraints. We introduce ObstacleSense, a highly compact, CNN-free hybrid ANN–SNN framework for Level 0–1 forward-corridor obstacle awareness. Instead of performing full-scene object detection with a convolutional feature backbone, ObstacleSense targets the safety-critical question of whether the ego corridor is occupied and how far the nearest obstacle is. The architecture combines polarity-conditioned event encoding, lightweight temporal spiking dynamics, axial spatial mixing, and coarse-to-fine range estimation within a regular fixed-grid compute pattern. This design avoids the dense CNN backbone commonly used in event-based detection while maintaining a small state footprint suitable for eventual small-FPGA deployment. Before hardware mapping, we evaluate the software implementation using a model-side power proxy derived from MACs, weight and activation traffic, and spiking state updates under shared FP16 assumptions. On simulated CARLA event corpora, the deployment-oriented model achieves 0.9464 objectness F1, 0.9978 grid-level mAP, and 0.8987 m distance Mean Absolute Error at an estimated 1.92 mW proxy cost, while maintaining performance on unseen generalization test sequences.

Johnson-Scott, Zac [ORNL]↗
DOE OSTI2026

Neural Scaling Laws for Jet Generation

Recently observed empirical scaling laws describe the performance of foundation-type models as three independent key quantities -- dataset size, compute, and model parameters -- are modified. Extracting these scaling laws informs the training of large complex models for which the tuning of hyperparameters in traditional ways is not feasible. This work for the first time explores if scaling laws can also be observed for the task of particle jet generation -- both relevant as a pre-training objective for foundation models and as in-situ simulation by itself. We indeed replicate the key logarithmic scaling law behavior for model-size scaling. Beyond studying the next token prediction validation loss of the generative model, we also study the sliced Wasserstein distance of five physical quantities that are not immediately available to the model during training. Our study shows that this quantity is monotonically related to the next token prediction validation loss, meaning that this loss is indeed a good proxy for the physics performance. For the scaling with dataset size and compute, we observe substantially weaker scaling behavior of both the loss and the sliced Wasserstein distance. We analyze this behavior by introducing the concept of a learnable window, and argue that autoregressive next token prediction on jet constituents exhibits comparatively rapid saturation relative to language-model studies. We discuss possible origins of this behavior, including the stochastic nature of QCD radiation and differences between generative and supervised learning tasks in collider physics.

Amram, Oz [Fermilab]↗
DOE OSTI2025

Surrogate Neural Architecture Codesign Package (SNAC-Pack)

Neural Architecture Search is a powerful approach for automating model design, but existing methods struggle to accurately optimize for real hardware performance, often relying on proxy metrics such as bit operations. We present Surrogate Neural Architecture Codesign Package (SNAC-Pack), an integrated framework that automates the discovery and optimization of neural networks focusing on FPGA deployment.

Weitz, Jason [UC, San Diego]↗
DOE OSTI2025

Surrogate Neural Architecture Codesign Package (SNAC-Pack)

Neural Architecture Search is a powerful approach for automating model design, but existing methods struggle to accurately optimize for real hardware performance, often relying on proxy metrics such as bit operations. We present Surrogate Neural Architecture Codesign Package (SNAC-Pack), an integrated framework that automates the discovery and optimization of neural networks focusing on FPGA deployment. SNAC-Pack combines Neural Architecture Codesign's multi-stage search capabilities with the Resource Utilization and Latency Estimator, enabling multi-objective optimization across accuracy, FPGA resource utilization, and latency without requiring time-intensive synthesis for each candidate model. We demonstrate SNAC-Pack on a high energy physics jet classification task, achieving 63.84% accuracy with resource estimation. When synthesized on a Xilinx Virtex UltraScale+ VU13P FPGA, the SNAC-Pack model matches baseline accuracy while maintaining comparable resource utilization to models optimized using traditional BOPs metrics. This work demonstrates the potential of hardware-aware neural architecture search for resource-constrained deployments and provides an open-source framework for automating the design of efficient FPGA-accelerated models.

Weitz, Jason [UC, San Diego] (ORCID:00090004631535↗
DOE OSTI2019

Performance Exploration Through Optimistic Static Program Annotations

Compilers are limited by the static information directly or indirectly encoded in the program. Low-level languages, such as C/C++, are considered problematic as their weak type system and relaxed memory semantic allows for various, sometimes non-obvious, behaviors. Since compilers have to preserve the program semantics for all program executions, the existence of exceptional behavior can prevent optimizations that the developer would consider valid and might expect. Analyses to guarantee the absence of disruptive and unlikely situations are consequently an indispensable part of an optimizing compiler. However, such analyses have to be approximative and limited in scope as global and exact solutions are infeasible for any non-trivial program. In this paper, we present an automated tool to measure the effectmissing static information has on the optimizations applied to a given program. The approach generates an optimistically optimized program version which, compared to the original, defines a performance gap that can be closed by better compiler analyses and selective static program annotations. Our evaluation on six already tuned proxy applications for high-performance codes shows speedups of up to 20.6%. This clearly indicates that static uncertainty limits performance. At the same time, we observed that compilers are often unable to utilize additional static information. Thus, manual annotation of all correct static information is therefore not only error prone but also mostly redundant.

Auto Tuning↗
DOE OSTI2017

Proxy App Prospectus for ECP Application Development Projects

The Exascale Computing Project (ECP) includes 25 application development (AD) projects1 and five co-design centers funded by the Office of Science, NNSA, and National Cancer Institute. Their full code bases are large and complex, and can be difficult for co-design partners to assimilate for use in collaboration for Exascale challenges. To alleviate this challenge, proxy applications (“apps”) are being developed: these are small, self-contained, simplified codes that are intended to model the performance-critical computations within applications. Proxy apps also capture programming methods and styles that drive requirements for compilers and other elements of the tool chain. Within ECP, application teams, co-design centers, software technology (ST) projects and vendors all plan to use proxies as a major mechanism to drive collaborations and co-design solutions for exascale challenges.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

The Financial Performance of Family versus Non-Family Firms Operating in Nautical Tourism

This article analyses the financial performance of family versus non-family firms operating in nautical tourism, in 2015–2019. The sample of 39 Portuguese companies was collected from the SABI database. We use a regression of financial performance, measured by three alternative proxies: return on assets, return on equity and operating profit margin, on liquidity, leverage, turnover of assets, asset structure, company size and age. The regressions are performed across Nuts II regions on mainland and across types of firms (family and non-family). The results uncover several patterns. First, family firms are larger and older, make higher investments and therefore are less liquid. Second, liquidity, leverage and investment in tangible assets impact negatively and significantly the corporate financial performance, while the turnover of assets, size and age impacts positively and significantly. Third, the sign of the impacts depends on the measure of performance. Finally, firms in the Northern region show superior performance, which can be explained by the higher share of family firms. These findings can serve as a roadmap for managers when selecting strategies to improve performance. Additionally, they will contribute to the understanding of tourism destination dynamics and competitiveness.

Santos, Eleonora (ORCID:0000000346930804)↗