Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase object approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Anatomy of a Turtle Confiscation: What to Expect When You're Not Expecting and Recommendations for Improving Outcomes

Turtles are being subjected to unprecedented collection for the illegal wildlife trade, but only a portion of the trade is detected. When confiscations do happen, wildlife agencies must decide what to do with those animals—euthanize them, place them in permanent captivity, or release them back into the wild. Here, we present a case study of a confiscation of .200 eastern box turtles (Terrapene carolina carolina) and our efforts to repatriate them back to the wild. Twentyfive percent of turtles died in captivity, and at least another 33% died during the soft-release phase. Approximately half of the confiscated turtles survived until they were released from their soft-release pen 9 months post-confiscation. For each phase, from the time turtles were seized until released, we describe our objectives, the challenges we encountered, and our recommendations for improving future turtle confiscations. Given the extended stressful conditions that confiscated turtles often experience before being seized, it is important to recalibrate our expectations regarding future confiscation outcomes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Nonlinear bioheat transfer models and multi-objective numerical optimization of the cryosurgery operations

Numerical computation of the three dimensional problem of the freezing interface propagation during the cryosurgery coupled with the multi-objective optimization methods is used in order to improve the efficiency and safety of the cryosurgery operations performing. Prostate cancer treatment and cutaneous cryosurgery are considered. The heat transfer in soft tissue during the thermal exposure to low temperature is described by the Pennes bioheat model and is coupled with an enthalpy method for blurred phase change computations. The finite volume method combined with the control volume approximation of the heat fluxes is applied for the cryosurgery numerical modeling on the tumor tissue of a quite arbitrary shape. The flux relaxation approach is used for the stability improvement of the explicit finite difference schemes. The method of the additional heating elements mounting is studied as an approach to control the cellular necrosis front propagation. Whereas the undestucted tumor tissue and destucted healthy tissue volumes are considered as objective functions, the locations of additional heating elements in cutaneous cryosurgery and cryotips in prostate cancer cryotreatment are considered as objective variables in multi-objective problem. The quasi-gradient method is proposed for the searching of the Pareto front segments as the multi-objective optimization problem solutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

A Proposed Common Model of Multi-phase Strength and Equation of State for a Tri-laboratory Collaboration (Working Draft 1.1)

The proposed simple common model for multiphase strength and EoS (CMMP) is meant to be sufficiently simple that each of the collaborating labs can share in a common starting point. Another objective is to start with relatively simple assumptions, which will not necessarily capture details of the physical processes, and incrementally add complexity in order to identify the minimal-needed technical detail. Through this co-evolution of model and experiment, we will better learn the importance of various theoretical approximations and where to invest future resources in experiment and model development. This simple framework is based on pressure and temperature equilibrium of all co-existing phases combined with deviatoric stress averaging through a volume fraction weighted ow stress and a volume fraction weighted shear modulus. Implementations of the framework based on equilibrium phase fractions (i.e. instantaneous kinetic rate) and for finite rate transition kinetics are proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Core Physics Characteristics of Extended Enrichment and High Burnup Boiling Water Reactor Fuel

This paper presents the highlights of boiling water reactor (BWR) core physics studies performed at Oak Ridge National Laboratory as part of a series of studies conducted to compare low-enriched uranium (LEU) with LEU+ fuel. The studies analyzed isotopic fuel content, lattice parameters (Phase 1), and core physics (Phase 2) to identify challenges in operation, storage, and transportation for BWRs and pressurized water reactors (PWRs). Because of a lack of publicly available lattice and core designs for modern BWR fuel assemblies and reactor cores, several optimized lattice designs were generated, and different core loading strategies were investigated. Twelve optimized lattice designs with 235 U enrichments ranging from 1.6% to 9% and gadolinia loadings ranging from 3 to 8 wt% were used to model axial enrichment and geometry variations in fuel assemblies for core designs. Each core shares a common set of approximations in design and analysis to allow for consistent comparisons between LEU and LEU+ fuel. The objective is to highlight anticipated changes in core behavior with respect to the reference LEU core. The results of this study show that the differences in LEU and LEU+ core reactor physics characteristics are less significant than the differences in lattice physics characteristics reported in the Phase 1 studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

High-Burnup Spent Fuel Data Project: Sister Rod Final Phase II Test Plan

The Sibling Pin test campaign is a Department of Energy (DOE) research activity within the Spent Fuel and Waste Science and Technology (SFWST) program that is tasked with characterization of high burnup (HBU) fuel in support of the High Burnup Spent Fuel Data Project. Of the 25 fuel rods in the Sibling Pin inventory, approximately 9 rod lengths have been consumed during the first phase (Phase I) of the test campaign leaving approximately 16 rod lengths for the second phase (Phase II) of testing. This plan outlines the Phase II testing and the motivations for performing these tests. Priorities for Phase II testing are based on previously identified knowledge gaps, lessons-learned from Phase I work, the original objectives of the High Burnup Spent Fuel Data Project and the Sibling Pin test campaign, and input from external stakeholders. The priorities for Phase II testing are to obtain data to characterize the effects of annealing on cladding mechanical properties and fuel rod performance, to quantify the creep behavior of cladding materials and fuel rods and the effects of creep deformations on the performance of cladding and fuel rods, and to gather data to support the final closure of the hydride reorientation and radial hydride induced embrittlement gap for HBU fuel rods.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Bhatnagar-Gross-Krook subgrid model for neutrino quantum kinetics

Here, we present a new subgrid model for neutrino quantum kinetics, which is primarily designed to incorporate effects of collective neutrino oscillations into neutrino-radiation-hydrodynamic simulations for core-collapse supernovae and mergers of compact objects. We approximate the neutrino oscillation term in a quantum kinetic equation using the Bhatnagar-Gross-Krook (BGK) relaxation-time prescription, and the transport equation is directly applicable for classical neutrino transport schemes. The BGK model is motivated by recent theoretical indications that nonlinear phases of collective neutrino oscillations settle into quasisteady structures. We explicitly provide basic equations of the BGK subgrid model for both multiangle and moment-based neutrino transport to facilitate the implementation of the subgrid model in the existing neutrino transport schemes. We also show the capability of our BGK subgrid model by comparing it to fully quantum kinetic simulations for fast neutrino-flavor conversion. We find that the overall properties can be well reproduced in the subgrid model; the error of angular-averaged survival probability of neutrinos is within ~20%. By identifying the source of error, we also discuss perspectives to improve the accuracy of the subgrid model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Performance prediction applying different reduced turbulence models to the SMART tokamak

The SMall Aspect Ratio Tokamak (SMART) is currently being commissioned at the University of Seville and will be able to compare the performance of positive and negative triangularity plasmas at low aspect ratio. Predictive simulations have been performed for different machine scenarios and heating schemes using the TRANSP code. The objectives of these simulations are to predict the parameters expected in positive triangularity plasmas, to guide diagnostic development, and to validate transport models. Several reduced turbulence models have been used to predict electron and ion temperatures for the operational phase 2. All models provide similar results from approximately mid-radius to the separatrix but important discrepancies are found in the core region. These positive triangularity results are compared with experiments from a similar size machine like GLOBUS-M2. The multi-mode model (MMM) shows the best agreement. Simulations with different boundary conditions have been performed and no strong differences have been observed between them. The impact of neutral beam injection (NBI) on the predicted profiles has also been addressed. Rotation reduces turbulence levels so higher temperatures are achieved when included in the simulations. Studying the different contributions to the thermal diffusivities, it is observed that electron temperature gradient (ETG) turbulence dominates at the plasma core while micro-tearing modes (MTM) dominate at the edge in the electron channel. In the ion channel, the neoclassical contribution is dominant at the core and at the very edge while the Weiland component, which includes ion temperature gradient mode (ITG), trapped electron mode (TEM), kinetic ballooning mode (KBM), peeling mode (PM) and collisionless and collision dominated magnetohydrodynamic (MHD) modes governs the mid-radius region. For phase 3, two plasmas with different electron densities have been studied. The case with lower density matches well a specific discharge of GLOBUS-M2. The higher density plasma shows high performance with β N ≈ 3.8.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Measurement and feedback-driven adaptive dynamics in the classical and quantum kicked top

In classical dynamical systems, stochastic feedback can stabilize otherwise unstable periodic orbits, giving rise to distinct controlled and uncontrolled phases as the rate of control application is varied. In this work, we apply these control protocols in classical, semiclassical, and quantum regimes to the kicked top, a paradigmatic model of quantum chaos. The quantum kicked top, modeled as the dynamics of a spin-S object, naturally interpolates between these regimes with the spin size S acting as an effective Planck constant. We show that the dynamics of the kicked top in classical, semiclassical, and fully quantum limits can all be controlled using stochastic feedback protocols. Comparing the full quantum dynamics to a truncated Wigner approximation that captures quantum noise but neglects interference beyond the Ehrenfest time, we find that low-moment observables are largely accounted for semiclassically, while the remaining discrepancy in higher moments is consistent with contributions from interference and possibly nonlinearities in rare trajectories that explore the compact phase space. We also find rapid purification in the numerics studied for all rates of control considered, suggesting that control quenches the top's ability to encode a qubit of quantum information even in the uncontrolled phase.

Prasad, Mahaveer [Tata Inst.; Singapore U. Tech. D↗
DOE OSTI2016

Automatic software correction of residual aberrations in reconstructed HRTEM exit waves of crystalline samples

Abstract We develop an automatic and objective method to measure and correct residual aberrations in atomic-resolution HRTEM complex exit waves for crystalline samples aligned along a low-index zone axis. Our method uses the approximate rotational point symmetry of a column of atoms or single atom to iteratively calculate a best-fit numerical phase plate for this symmetry condition, and does not require information about the sample thickness or precise structure. We apply our method to two experimental focal series reconstructions, imaging a β-Si 3 N 4 wedge with O and N doping, and a single-layer graphene grain boundary. We use peak and lattice fitting to evaluate the precision of the corrected exit waves. We also apply our method to the exit wave of a Si wedge retrieved by off-axis electron holography. In all cases, the software correction of the residual aberration function improves the accuracy of the measured exit waves.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Near-field limitations of Fresnel-regime coherent diffraction imaging

Coherent diffraction imaging (CDI) is a rapidly developing form of imaging that offers the potential of wavelength-limited resolution without image-forming lenses. In CDI, the intensity of the diffraction pattern is measured directly by the detector, and various iterative phase retrieval algorithms are used to “invert” the diffraction pattern and reconstruct a high-resolution image of the sample. But, there are certain requirements in CDI that must be met to reconstruct the object. Although most experiments are conducted in the “far-field”—or Fraunhofer—regime where the requirements are not as stringent, some experiments must be conducted in the “near field” where Fresnel diffraction must be considered. According to the derivation of Fresnel diffraction, successful reconstructions can only be obtained when the small-angle number, a derived quantity, is much less than one. We show, however, that it is not actually necessary to fulfill the small-angle condition. The Fresnel kernel well approximates the exact kernel in regions where the phase oscillates slowly, and in regions of fast oscillations, indicated by large A n , the error between kernels should be negligible due to stationary-phase arguments. Finally we verify, by experiment, this conclusion with a helium neon laser setup and show that it should hold at x-ray wavelengths as well.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Shock-induced transformation of nitinol shape memory alloy: Effect of stress state on transformation

Due to its numerous practical applications and intriguing phase transformation behavior, shape memory alloys (SMAs) have garnered significant research and development interests. In the past, most studies on the mechanical behavior of SMAs have been conducted under uniaxial stress loadings. Limited research on SMAs under shock loading has not provided conclusive results regarding their transformation behavior and transformation stress under such loading. Additionally, there is a lack of comprehensive understanding regarding the effects of different stress states on transformation behavior. The main objectives of this study are to address these issues. To achieve these objectives, a series of shock wave experiments were designed and conducted. Additionally, quasi-static and dynamic uniaxial stress experiments were carried out to establish a baseline for comparison. The results revealed that the transformation stress under dynamic uniaxial strain shock loading was approximately 1.92 GPa in contrast to 0.5 GPa (quasi-static) to 0.8 GPa (dynamic) observed in uniaxial stress loading. The transformation behavior exhibited noticeable rate sensitivity for both types of loading. There appeared to be a critical strain rate above which the austenite phase was driven to a metastable state. This estimated critical axial strain rate along the loading direction was approximately 2 × 10 3 /s–4 × 10 3 /s for uniaxial stress loading and approximately 2 × 10 6 /s for uniaxial strain loading. The apparent high transformation stress for uniaxial strain loading can likely be attributed to a combination of high-pressure confinement and high strain rate. Furthermore, determining their relative contributions remains an open issue.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Adaptive correction of the image of an incoherent source object

The paper examines the operation of an optical system forming an image of an incoherent source object under conditions of atmospheric noise. The effect of atmospheric turbulence is considered. The calculations are performed in the Fresnel – Huygens approximation. The characteristics of the image for ‘long’ and ‘short’ exposures are investigated. The issues related to the adaptive correction of the general light wavefront slopes are discussed. The limits of applicability of phase adaptive correction using a reference source are shown. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Analytical Voltage Sensitivity Analysis for Unbalanced Power Distribution System

Large scale integration of distributed energy resources and electric vehicles in a transactive energy environment present new challenges in terms of voltage stability and fluctuations in a power distribution system. The impact of different level of DER/EV penetration on the voltages across the network is typically quantified through voltage sensitivity analyses. Existing methods of voltage sensitivity analysis are computationally expensive and prior efforts to develop analytical approximation lacks generality and have not been effectively validated. The objective of this work is to provide a new analytical method of voltage sensitivity analysis that has low computational cost and also allows for stochastic analysis of voltage change. This paper first derives an analytical approximation of change in voltage at a particular bus due to change in power consumption at other bus in a radial three phase unbalanced power distribution system. Then, the proposed method is shown to be valid for different load configurations, which demonstrates its generality. The results from our analytical approach is validated via classical load flow simulation of the test system based on IEEE 37 bus network. The proposed method is shown to have good accuracy, and computation complexity is of order O(1), compared to O(n3) in classical sensitivity analysis approaches.

Munikoti, Sai↗
DOE OSTI2023

Spatiotemporal Super-Resolution with Generative Machine Learning for Creating Renewable Energy Resource Data Under Climate Change Scenarios

As we plan for a future with higher penetrations of renewables and increasing electrification, it becomes more important to understand how the electricity grid will operate under a variety of weather events. We must also consider that the weather our future grid will experience will be different and possibly more extreme than the historical weather that we have extensive data for. We can use data from global climate models (GCMs) to help understand how our climate may change over the next several decades, but there is often a significant gap between the low-resolution GCM data and the high-resolution weather data required to study power systems under specific weather events. Therefore, our objective in this work is to develop tools that can bridge this gap by using low-resolution GCM data to create realistic high-resolution weather datasets that can be used to study renewable energy generation and electricity demand. To accomplish this objective, we have developed a set of generative machine learning models that can rapidly downscale GCM daily average output data at an approximate grid resolution of 100km to hourly data at an approximate 4 km grid resolution. The models can be used to create high resolution data from nearly any GCM included in the Coupled Model Intercomparison Project (CMIP) Phase 5 or 6. Our methods include all datasets regularly used to study the integration of wind and solar power plants as well as changes in electricity demand due to heating and cooling loads. These models and datasets enable power systems modelers to study climate change-influenced weather events and their impact on the grid. We have downscaled and validated wind, solar, temperature, and humidity data with very promising results. The generative machine learning methods are computationally efficient and produce data that has similar statistical characteristics to current state-of-the-art historical datasets. We have trained initial generative models and produced an initial dataset collectively referred to as Sup3rCC: Super-Resolved Renewable Energy Resource Data with Climate Change Impacts. The data covers a (mostly) historical period from 2015-2025 and a future period from 2050-2059. We have also taken hypothetical high-electrification load data and scaled the heating and cooling loads with respect to the 2050-2059 high-resolution Sup3rCC meteorology. The results show how future levels of renewable energy generation and electrified load may be impacted by climate change, setting the stage for capacity expansion models to consider a dynamic climate through model years.

climate change↗
DOE OSTI2019

The purported square ice in bilayer graphene is a nanoscale, monolayer object

The phase diagram of water is complex, and interfacial effects can stabilize unusual structures at the nanoscale. In this paper, we employ bond order accelerated molecular dynamics simulations to show that upon encapsulation within bilayer graphene, water can spontaneously adopt a two-dimensional (monomolecular) layer of “square ice” at ambient conditions, instead of an encapsulated water droplet. Free energy calculations show that this motif is thermodynamically stable up to diameters of approximately 15 nm due to enhanced hydrogen bonding and favorable binding to the graphene sheets. Entropic losses due to solidification and reduced graphene–graphene binding enthalpy are opposing thermodynamic forces that conspire to limit the maximum size, but modification of any of these thermodynamic factors should change the range of stability. Finally, simulated core-level spectroscopy reveals unambiguous orientation dependent signatures of square ice that should be discernable in experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The eROSITA Final Equatorial-Depth Survey (eFEDS)

Here, we investigate the physical properties – such as the stellar mass (M * ), star-formation rate, infrared (IR) luminosity (L IR ), X-ray luminosity (L X ), and hydrogen column density (N H ) – of mid-IR (MIR) galaxies and active galactic nuclei (AGN) at z < 4 in the 140 deg 2 field observed by eROSITA on SRG using the Performance-and-Verification-Phase program named the eROSITA Final Equatorial Depth Survey (eFEDS). By cross-matching the WISE 22 μm (W4)-detected sample and the eFEDS X-ray point-source catalog, we find that 692 extragalactic objects are detected by eROSITA. We have compiled a multiwavelength dataset extending from X-ray to far-IR wavelengths. We have also performed (i) an X-ray spectral analysis, (ii) spectral-energy-distribution fitting using X-CIGALE, (iii) 2D image-decomposition analysis using Subaru Hyper Suprime-Cam images, and (iv) optical spectral fitting with QSFit to investigate the AGN and host-galaxy properties. For 7088 WISE 22 μm objects that are undetected by eROSITA, we have performed an X-ray stacking analysis to examine the typical physical properties of these X-ray faint and probably obscured objects. We find that (i) 82% of the eFEDS–W4 sources are classified as X-ray AGN with log L X > 42 erg s –1 ; (ii) 67 and 24% of the objects have log(L IR /L ⊙ ) > 12 and 13, respectively; (iii) the relationship between L X and the 6 μm luminosity is consistent with that reported in previous works; and (iv) the relationship between the Eddington ratio and N H for the eFEDS–W4 sample and a comparison with a model prediction from a galaxy-merger simulation indicates that approximately 5.0% of the eFEDS–W4 sources in our sample are likely to be in an AGN-feedback phase, in which strong radiation pressure from the AGN blows out the surrounding material from the nuclear region. Thanks to the wide area coverage of eFEDS, we have been able to constrain the ranges of the physical properties of the WISE 22 μm-selected sample of AGNs at z < 4, providing a benchmark for forthcoming studies on a complete census of MIR galaxies selected from the full-depth eROSITA all-sky survey.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Three-dimensional imaging using coherent x rays at grazing incidence geometry

We have developed a three-dimensional coherent diffraction imaging algorithm to retrieve phases of diffraction patterns of samples in grazing incidence small angle x-ray scattering experiments. The algorithm interprets the diffraction patterns using the distorted-wave Born approximation instead of the Born approximation, as in this case, the existence of a reflected beam from the substrate causes the diffraction pattern to deviate significantly from the simple Fourier transform of the object. Detailed computer simulations show that the algorithm works. Verification with real experiments is planned.

Yang, Yi↗
DOE OSTI2021

Mildly Hierarchical Triple Dynamics and Applications to the Outer Solar System

Three-body interactions are ubiquitous in astrophysics. For instance, Kozai–Lidov oscillations in hierarchical triple systems have been studied extensively and applied to a wide range of astrophysical systems. However, mildly hierarchical triples also play an important role, but they are less explored. In this work, we consider the secular dynamics of a test particle in a mildly hierarchical configuration. We find the limit within which the secular approximation is reliable when the outer perturber is in a circular orbit. In addition, we present resonances and chaotic regions using surface-of-section plots, and characterize regions of phase space that allow large eccentricity and inclination variations. Finally, we apply the secular results to the outer Solar System. We focus on the distribution of extreme trans-Neptunian objects (eTNOs) under the perturbation of a possible outer planet (Planet 9), and find that in addition to a low-inclination Planet 9, a polar or a counter-orbiting one could also produce pericenter clustering of eTNOs, while the polar one leads to a wider spread of eTNO inclinations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗