Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase transformation kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Kinetics of hexacelsian to celsian phase transformation in SrAl2Si2O8

The kinetics of hexacelsian to celsian phase transformation in SrAl2Si2O8 have been investigated. Phase pure hexacelsian was prepared by heat treatment of glass flakes at 990 C for 10 h. Bulk hexacelsian was isothermally heat treated at 1026, 1050, 1100, 1152, and 1200 C for various times. The amounts of monoclinic celsian formed were determined using quantitative X-ray diffraction. Values of reaction rate constant, k, at various temperatures were evaluated from the Avrami equation. The Avrami parameter was determined to be 1.1, suggesting a diffusionless, one-dimensional transformation mechanism. From the temperature dependence of k, the activation energy for this reaction was evaluated to be 527 plus or minus 50 kJ/mole (126 plus or minus 12 kcal/mole). This value is consistent with a mechanism involving the transformation of the layered hexacelsian structure to a three-dimensional network celsian structure which necessitates breaking of the strongest bonds, the Si-O bonds.

Bansal, Narottam P.↗
DOE OSTI2022

A Coupled Small and Wide-Angle X-Ray Scattering Study of Phase Transformation Mechanisms in U-6Wt Pct Nb

The elevated temperature phase transformation kinetics of U-6wt%Nb in both wrought and cast conditions were investigated using in-situ high energy synchrotron X-ray scattering. The evolution of the phase content, γ-phase composition, and microstructure morphology was determined through the analysis of simultaneously collected wide-angle diffraction and small-angle scattering (SAXS) data. The results of the wide-angle scattering analysis, especially the phase fractions and average composition of the γ-phase, provide model parameters to enable a quantitative analysis using the SAXS data. Greater clarity regarding the kinetics of different precipitation mechanisms, namely the continuous precipitation (CP) of α-U within the γ-phase matrix and the discontinuous (DP) grain boundary precipitation of a lamellar microstructure, consisting of α-U and Nb-rich γ-phase are obtained from the coupled measurement modes. These results indicate that the CP mechanism is responsible for the initial precipitation of α-U at all temperatures considered. Near the nose in the time-temperature-transformation (TTT) diagram at ~798 K, both mechanisms are active during the early stages of phase transformation. However, the DP mechanism has an increasingly long incubation period with decreasing temperature below the TTT nose. In conclusion, the average interlamellar spacing obtained from the SAXS analysis increases with time, providing further evidence of the so-called divergent DP behavior previously observed in U-6wt%Nb alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Kinetics of hexacelsian-to-celsian phase transformation in SrAl2Si2O8

The kinetics of hexacelsian to celsian phase transformation in SrAl2Si2O8 have been investigated. Phase pure hexacelsian was prepared by heat treatment of glass flakes at 990 C for 10 h. Bulk hexacelsian was isothermally heat treated at 1026, 1050, 1100, 1152, and 1200 C for various times. The amounts of monoclinic celsian formed were determined using quantitative X-ray diffraction. Values of reaction rate constant, k, at various temperatures were evaluated from the Avrami equation. The Avrami parameter was determined to be 1.1, suggesting a diffusionless, one-dimensional transformation mechanism. From the temperature dependence of k, the activation energy for this reaction was evaluated to be 527 plus or minus 50 kJ/mole (126 plus or minus 12 kcal/mole). This value is consistent with a mechanism involving the transformation of the layered hexacelsian structure to a three-dimensional network celsian structure which necessitates breaking of the strongest bonds, the Si-O bonds.

Bansal, Narottam P.↗
DOE OSTI2024

Navigating phase diagram complexity to guide robotic inorganic materials synthesis

Abstract Efficient synthesis recipes are needed to streamline the manufacturing of complex materials and to accelerate the realization of theoretically predicted materials. Often, the solid-state synthesis of multicomponent oxides is impeded by undesired by-product phases, which can kinetically trap reactions in an incomplete non-equilibrium state. Here we report a thermodynamic strategy to navigate high-dimensional phase diagrams in search of precursors that circumvent low-energy, competing by-products, while maximizing the reaction energy to drive fast phase transformation kinetics. Using a robotic inorganic materials synthesis laboratory, we perform a large-scale experimental validation of our precursor selection principles. For a set of 35 target quaternary oxides, with chemistries representative of intercalation battery cathodes and solid-state electrolytes, our robot performs 224 reactions spanning 27 elements with 28 unique precursors, operated by 1 human experimentalist. Our predicted precursors frequently yield target materials with higher phase purity than traditional precursors. Robotic laboratories offer an exciting platform for data-driven experimental synthesis science, from which we can develop fundamental insights to guide both human and robotic chemists.

Chen, Jiadong (ORCID:0009000476038838)↗
DOE OSTI2021

Magnetic ordering suppressed phase transformation of a TRIP-HEA during thermal cycling

Transformation-induced plasticity (TRIP) high-entropy alloys (HEAs) have drawn great attention as they present excellent mechanical properties, and their phase stability is critical for the underlying deformation mechanisms and the application temperature range. In this study, the kinetic phase transformation behavior of a dual-phase TRIP-HEA Fe 50 Mn 30 Co 10 Cr 10 (at. %) was probed by in situ neutron diffraction during thermal cycling between 293 and 425 K. Continuous austenitic and martensitic transformation were visualized through the evolution of hexagonal close-packed phase fraction during thermal cycling. Specifically, thanks to the magnetic sensitivity of neutron diffraction, it was found that the martensitic transformation under cooling became suppressed when the antiferromagnetic ordering started at ~326 K. This temperature was further confirmed as the Néel temperature by magnetization measurements. In this work, thermodynamic calculations revealed that the suppression effect on martensitic transformation is attributed to the consumption of the chemical driving force by the magnetic ordering. The magnetic ordering at such relatively high temperature is associated with the high Mn content. These findings shed light on a potential strategy to achieve better mechanical properties of Mn-containing alloys by manipulating the magnetic property through tuning the Mn content.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Phase-Field Model for In-Space Manufacturing of Binary Alloys

The integrity of the final printed components is mostly dictated by the adhesion between the particles and phases that form upon solidification, which is a major problem in printing metallic parts using available In-Space Manufacturing (ISM) technologies based on the Fused Deposition Modeling (FDM) methodology. Understanding the melting/solidification process helps increase particle adherence and allows to produce components with greater mechanical integrity. We developed a phase-field model of solidification for binary alloys. The phase-field approach is unique in capturing the microstructure with computationally tractable costs. The developed phase-field model of solidification of binary alloys satisfies the stability conditions at all temperatures. The suggested model is tuned for Ni-Cu alloy feedstocks. We derived the Ginzburg-Landau equations governing the phase transformation kinetics and solved them analytically for the dilute solution. We calculated the concentration profile as a function of interface velocity for a one-dimensional steady-state diffuse interface neglecting elasticity and obtained the partition coefficient, k, as a function of interface velocity. Numerical simulations for the diluted solution are used to study the interface velocity as a function of undercooling for the classic sharp interface model, partitionless solidification, and thin interface.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Limited-Ranged Two-Phase Iron Equation of State Model

This report describes the construction of a two-phase EOS for Fe that includes both (hcp) and liquid phases, and which is meant to be valid over the restricted range: V ϵ [4 : 7] °A 3 /atom, and T ϵ [1000 : 20000] K. It was recently used as the basis for a theoretical study of liquid → solid phase transformation kinetics in Fe which appeared in the Supplemental Material for a paper describing a series of NIF shock + ramp compression experiments aimed at constraining the high-P melt curve of Fe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Hardness Prediction by Incorporating Heat Transfer and Molten Pool Fluid Flow in a Multi-pass, Multi-layer Weld for Onsite Repair of Grade 91 steel

Introduction: In the current fleet of fossil-fired power plants, creep strength enhanced ferritic steels (CSEF) are used to sustain the harsh service conditions. Enhanced properties of Grade 91 steel result from tempered martensite with a fine distribution of MX and M23C6 carbides. Grade 91 steel is subjected to onsite welding repair to remedy their degradation due to extreme service condition. Knowledge of weld repairability of these steels, such as as-welded hardness distribution, is essential to establishing sound repair procedures. Experimental trial and error tests can consume a lot of time as many welding variables need to be studied. For numerical modelling, most of the multi-pass multi-layer models are based on finite element method, which are limited to solve the heat conduction equation and ignore convective heat transfer due to melt flow. Moreover, the mesh has to be pre-built based on a known or assumed weld cross-section geometry. These finite element based models thus have limited predictive capability as defects are not considered and nugget size are pre-assumed. This research aims at developing a thermal and microstructure evolution model incorporating molten pool dynamics in a multi-pass multi-layer material deposition to predict the as-welded hardness distribution. Technical Approach: All the thermal, physical, and metallurgical properties of Grade 91 as a function of temperature are collected from the literature and inputted into the thermo-fluid model based on Flow-3D, a computational fluid dynamics software. A multi-pass, multi-layer material deposition is simulated where the melting of filler wire into the molten pool is directly considered based on the volume of fluid (VOF) method. The flow behaviour of the molten pool is used to understand the formation of deposition geometry and defects. The temperature profiles during the multi-pass, multi-layer welding are calculated. The results computed using the new model are compared against the experimental data of fusion zone geometry and thermal cycles. Hardness prediction in the heat-affected zone (HAZ) are made using Johnson-Mehl-Avrami (JMA) equation for solid-state phase transformation kinetics. The JMA parameters are extracted from the experimental data available in the literature. For comparison, a standard finite element heat conduction model is also developed to predict the thermal cycles and hardness distribution in the multi-pass, multi-layer weld. Expected Result: Results obtained using the molten pool dynamic simulation versus the finite element heat conduction model are compared. Specifically, the effects of convective heat transfer on the accuracy of the calculated thermal history, bead shape and size, and HAZ hardness distribution are examined.

Modeling, Grade 91 steel, Multi-pass multi-layer d↗
NASA NTRS1979

Kinetics of the phase transformation in a Ti-15Mo-5Zr-3Al alloy as studied by X-ray diffraction

The purpose of the study is to make the T-T-T diagram available and to describe the X-ray diffraction techniques used to determine the fraction of transformed phase in the Ti-15Mo-5Zr-3Al metastable beta-alloy which decomposes into the hexagonal alpha-phase and the bcc beta-phase of a higher Mo concentration. The sheet material studied for this study is not ideal for an X-ray examination because of both a rolling and annealing texture as well as grain size problems. These difficulties are overcome using special X-ray techniques. Equations are given that indicate the approximations to be accepted if pole figure data are disregarded. Lattice parameter data from the beta phase enables one to obtain an approximate phase diagram.

Rao, V. B.↗
DOE OSTI2021

Role of thermo-mechanical gyrations on the α/β interface stability in a Ti6Al4V AM alloy

Fluctuating energy distributions experienced during Additive Manufacturing yield an evolution of spatial and temporal transients within a part. In general, the in-situ monitoring of these transients is near to impossible during manufacturing. In order to then gain perspective into the impact on these localized thermo-mechanical transients on the interface stability, rapid thermo-mechanical reversals with known boundary conditions are imposed on an AM Ti6Al4V alloy which resulted in a phase transformation leading to an increased β phase stability. Our goal with this study is to comprehend the kinetics of this phase transformation with concepts of stored energy due to plastic strain accumulation and diffusion kinetics. Atom Probe Tomography is employed to study the partitioning of the solute elements across the interface. As expected, the thermo-mechanically cycled samples showed a reduced Vanadium concentration across the β phase. Finally, this concentration profile across the interface, alongside a full-width-half-max analysis, provided insight on the potential phase transformation kinetics involved in the α → β transformation subject to thermo- mechanical gyrations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Kinetics of HCP-BCC Phase Transition Boundary in Magnesium at High Pressure

Under high pressures, many crystalline metals undergo solid–solid phase transformations. In order to accurately model the behavior of materials under extreme loading conditions, it is essential to understand the kinetics of phase transition. Using molecular dynamics simulations, this work demonstrates the feasibility of characterizing the speeds of a moving phase boundary using atomistic simulations employing a suitable empirical potential for single-crystal magnesium. The model can provide temperature- and tensorial stress-dependent velocity of a moving phase boundary as a rate-limiting contribution to the kinetics of phase transformation in continuum codes. Results demonstrate that a nonlinear interaction exists between plasticity and phase transition, facilitating a jump in the velocity of a moving phase boundary, facilitated by activated plastic deformation mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of External Conditions on the Black-to-Yellow Phase Transition of CsPbI 3 Based on First-Principles Calculations: Pressure and Moisture

All-inorganic CsPbI 3 perovskite has emerged as a promising candidate for next-generation solar cells. However, owing to the poor structural stability of black phase CsPbI 3 perovskite at room temperature, it spontaneously transforms to the yellow, photoinactive, nonperovskite phase at room temperature, limiting further development of CsPbI 3 perovskite solar cells. Here, to better understand the mechanism driving such undesirable phase transformation, we examine the thermodynamics and kinetics associated with γ-to-δ phase transformation using density functional theory calculation. A solid-state nudged elastic band method was employed to find minimum energy pathways assuming a concerted solid-state phase transformation between these two phases. The gas molecules representing atmospheric (H 2 O, O 2 , and N 2 ) and inert (Ar) ambient environments, as well as applied external pressure, were considered to examine the influence of external conditions on the black-to-yellow phase transition. Our calculation reveals that, with increasing pressure, the thermodynamic driving force for converting the γ-phase to the δ-phase increases, whereas a larger activation energy must be overcome for the phase transition to occur. We also investigate the moisture-induced phase transformation with an H 2 O molecule and its dissociated species (H + /OH – ) and demonstrate that the reaction energy barriers can be significantly lowered in the presence of H 2 O or OH – . On the other hand, other nonpolar species (O 2 , N 2 , and Ar) have a negligible effect on the phase transformation kinetics, while they might reduce the thermodynamic driving force for the phase transformation and suppress the undesirable phase transformation. Our theoretical prediction could support recent observations that the γ-to-δ phase transformation occurs rapidly and catalytically in the presence of moisture, whereas in dry argon and dry oxygen atmospheres, the γ-CsPbI 3 remains stable.

14 SOLAR ENERGY↗
DOE OSTI2021

Helium-bubble-enhanced disordering of intermetallic phase under irradiation

Understanding and controlling phase transformations in metals and alloys under irradiation is vital to the design of irradiation-tolerant materials. The L1 2 -ordered intermetallic phase in nickel-based superalloys provides superior high-temperature mechanical properties and corrosion resistance. Here, we studied the order-disorder transformation kinetics of an L1 2 -structured gamma-prime phase in nickel-based superalloy Rene N4 under krypton ion irradiation and the effect of pre-implanted helium gas bubbles on the kinetics of phase transformation. Furthermore, the presence of pre-implanted helium gas bubbles significantly enhances the order-disorder transformation of L1 2 -structured gamma-prime phase under irradiation at 300 °C. The evolution of pre-implanted helium gas bubbles under irradiation implies that helium gas bubbles could effectively trap irradiation-induced vacancies and impede the reordering process of anti-site defects in gamma-prime phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interplay of Mechanochemistry and Material Processes in the Graphite to Diamond Phase Transformation

The manifestation of intramolecular strains in covalent systems is widely known to accelerate chemical reactions and open alternative reaction paths. This process is moderately well understood for isolated molecules and unimolecular processes. However, in condensed matter processes such as phase transformations, material properties and structure may influence typical mechanochemical effects. Therefore, we utilize steered molecular dynamics to induce out of plane strains in graphite and compress the system under a constant strain rate to induce phase transformation. We show that the out of plane strain allows phase transformations to initiate at small amounts of compressive strain. Yet, in contrast to typical mechanochemical results, the sum of compressive and out of plane work needed to form a diamond has a local minimum due to altered defect formation processes during phase transformation. Additionally, these altered processes slow the kinetics of the phase transformation, taking longer from initiation to total material transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Nonlinear Acoustical Assessment of Precipitate Nucleation

The purpose of the present work is to show that measurements of the acoustic nonlinearity parameter in heat treatable alloys as a function of heat treatment time can provide quantitative information about the kinetics of precipitate nucleation and growth in such alloys. Generally, information on the kinetics of phase transformations is obtained from time-sequenced electron microscopical examination and differential scanning microcalorimetry. The present nonlinear acoustical assessment of precipitation kinetics is based on the development of a multiparameter analytical model of the effects on the nonlinearity parameter of precipitate nucleation and growth in the alloy system. A nonlinear curve fit of the model equation to the experimental data is then used to extract the kinetic parameters related to the nucleation and growth of the targeted precipitate. The analytical model and curve fit is applied to the assessment of S' precipitation in aluminum alloy 2024 during artificial aging from the T4 to the T6 temper.

Cantrell, John H.↗
DOE OSTI2023

High-temperature active oxidation of nanocrystalline silicon-carbide: A reactive force-field molecular dynamics study

Flexible woven SiC ceramics are prone to accelerated fiber embrittlement under high temperature oxidation in dynamic oxygen environments. The nanocrystalline structure of the constituent fibers impacts the reaction kinetics and phase transformations during active oxidation. However, fundamental understanding and quantification of grain boundary effects on oxidation behavior in nanocrystalline SiC remain elusive when temperatures exceed 1500 K. This study deploys large-scale molecular dynamics simulations with a reactive force-field to elucidate the complex roles of atomic oxygen reservoir conditions and grain size on oxidation kinetics and the nature of oxides produced in both monocrystalline and nanocrystalline 3C-SiC between 1100 K and 2000 K. The simulations with dynamically replenished oxygen provide good agreement with oxidation kinetics and activation energies for the monocrystalline Si(100) and C(100) orientations published in the available literature. This study reveals that, by contrast, nanocrystalline SiC samples exhibit two distinct oxidation kinetics with a transition point at 1500 K due to surface melting, which is supported by experimental evidence. The introduction of a grain-boundary network produces a two-fold decrease in oxidation activation energies compared to monocrystalline SiC below 1500 K. Above 1500 K, however, the activation energies rise substantially due to the formation of a liquid Si phase at the SiC/Si oxide interface. Further, it is shown that the stability of the interfacial liquid phase is promoted by incoherent grain boundaries in the crystalline SiC. These findings are important for the deployment of nanocrystalline SiC fibers in advanced thermal protection systems for high-temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Observation of Fundamental Mechanisms in Compression-Induced Phase Transformations Using Ultrafast X-ray Diffraction

As theoretically hypothesized for several decades in group IV transition metals, we have discovered a dynamically stabilized body-centered cubic (bcc) intermediate state in Zr under uniaxial loading at sub-nanosecond timescales. Under ultrafast shock wave compression, rather than the transformation from α-Zr to the more disordered hex-3 equilibrium ω-Zr phase, in its place we find the formation of a previously unobserved nonequilibrium bcc metastable intermediate. We probe the compression-induced phase transition pathway in zirconium using time-resolved sub-picosecond x-ray diffraction analysis at the Linac Coherent Light Source. We also present molecular dynamics simulations using a potential derived from first-principles methods which independently predict this intermediate phase under ultrafast shock conditions. In contrast with experiments on longer timescale (> 10 ns) where the phase diagram alone is an adequate predictor of the crystalline structure of a material, our recent study highlights the importance of metastability and time dependence in the kinetics of phase transformations.

36 MATERIALS SCIENCE↗