Search NASA⌕ Search

SEARCH · Search NASA

Results for “photo electron spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Two-dimensional electronic–vibrational sum frequency spectroscopy for interactions of electronic and nuclear motions at interfaces

Significance Electronic–vibrational couplings are pivotal in many photo-induced processes at interfaces and surfaces. Two-dimensional electronic–vibrational sum frequency generation spectroscopy is a unique tool to decipher electronic–vibrational couplings for excited states of molecules at interfaces and surfaces, enabling the correlation of photo-induced electronic–vibrational manifolds with their subsequent time evolution of high-frequency vibrational modes. This technique is especially powerful to monitor ultrafast processes such as charge transfer, energy transfer, proton transfer, and proton-coupled charge transfer at interfaces and surfaces on a real-time basis.

Deng, Gang-Hua↗
DOE OSTI2024

Uniaxial strain tuning of charge modulation and singularity in a kagome superconductor

Tunable quantum materials hold great potential for applications. Of special interest are materials in which small lattice strain induces giant electronic responses. The kagome compounds AV 3 Sb 5 (A = K, Rb, Cs) provide a testbed for electronic tunable states. In this study, through angle-resolved photo- emission spectroscopy, we provide comprehensive spectroscopic measure- ments of the electronic responses induced by compressive and tensile strains on the charge-density-wave (CDW) and van Hove singularity (VHS) in CsV 3 Sb 5 . We observe a tripling of the CDW gap magnitudes with ~ 1% strain. Simulta- neously, changes of both energy and mass of the VHS are observed. Combined, this reveals an anticorrelation between the unconventional CDW order para- meter and the mass of the VHS, and highlight the role of the latter in the superconducting pairing. The substantial electronic responses uncover a rich strain tunability of the versatile kagome system in studying quantum inter- plays under lattice variations.

electronic properties and materials↗
DOE OSTI2022

Persistent Room-Temperature Photodarkening in Cu-Doped β - Ga 2 O 3

β–Ga 2 O 3 is an ultrawide band gap semiconductor with emerging applications in power electronics. Here, the introduction of acceptor dopants yields semi-insulating substrates necessary for thin-film devices. In the present work, exposure of Cu-doped β–Ga 2 O 3 to UV light > 4 eV is shown to cause large, persistent photo-induced darkening at room temperature. Electron paramagnetic resonance spectroscopy indicates that light exposure converts Cu 2+ to Cu 3+ , a rare oxidation state that is responsible for the optical absorption. The photodarkening is accompanied by the appearance of O–H vibrational modes in the infrared spectrum. Hybrid function calculations show that Cu acceptors can favorably complex with hydrogen donors incorporated as interstitial (Hi) or substitutional (HO) defects. When Cu Ga –HO complexes absorb light, hydrogen is released, contributing to the observed Cu 3+ species and O–H modes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The criteria in above-bandgap photo-irradiation in molecular beam epitaxy growth of heterostructure of dissimilar growth temperature

Above-bandgap photo-irradiation is known to improve the low temperature growth of II-VI semiconductors, but the trade-offs in the substrate temperature and light source power density are not well known. We investigated these effects on the growth of ZnSe epilayers on GaAs. Here, we find that the above-bandgap photo-irradiation can improve the ZnSe epilayer without substantially negatively impacting the underlying GaAs epilayer only if the laser energy is below a threshold intensity. When the threshold is exceeded, the growth rate drops, the optical properties of ZnSe layer deteriorate and interface intermixing is enhanced. Together, cross-sectional transmission electron microscopy, energy dispersive spectroscopy and photoluminescence results suggest that photo-irradiation at moderate to high laser energies produces a trade-off in interface intermixing and planar defect formation. Most importantly, the damage produced by high laser energies does not start at the interface but instead in the bulk. Further flexibility for selecting the temperature and photo-irradiation intensities could be realized by turning on the laser irradiation after the ZnSe growth has been initiated, limiting the potential intermixing at the interface.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Excited-state vibronic coherences and intramolecular charge transfer dynamics of the photoinactive cyanobacteriochrome NpF2164g5

We have characterized the excited-state structural dynamics that follow optical excitation of the photoinactive cyanobacteriochrome (CBCR) NpF2164g5 to determine the first events along the photoisomerization reaction coordinate of the phycocyanobilin (PCB) chromophore in red-to-green photoactive CBCRs. Within 25 fs of photoexcitation to the first excited singlet state, S1, a cross peak begins to develop below the diagonal of the broadband two-dimensional electronic spectrum (2DES) owing to the formation of a twisted conformation of the PCB chromophore with an enhanced intramolecular charge-transfer (ICT) character. Excited-state coherent wavepacket motions, including a torsion of the methine bridge between rings C and D and the carbon–hydrogen out-of-plane (HOOP) wagging vibration, are rapidly damped as the cross peak forms. This finding supports an assignment of the torsional and HOOP modes to the reaction coordinate of a coherent nonadiabatic mechanism. The ICT process is accompanied by an ultrafast Stokes shift and rapidly damped oscillations at the torsional mode’s frequency, which are sensed by measurements of the energy gap of the cross peak using its first moment with respect to the detection frequency axis of the 2DES spectrum. Furthermore, these results have the further implication that polar side chains of nearby amino acid residues in the binding site of the PCB chromophore can manipulate the barrier height for photoisomerization in red-to-green photoactive CBCRs and in phytochromes by redistributing the π-electron density along the methine bridge between the C and D rings.

Charge transfer↗
DOE OSTI2021

Effect of Ni particle size on the production of renewable methane from CO 2 over Ni/CeO 2 catalyst

Production of ‘renewable Methane’ has attracted renewed research interest as a fundamental probe reaction and process for CO 2 utilization through potential use in C1 fuel production and even for future space exploration technologies. CO 2 methanation is a structure sensitive reaction on Ni/CeO 2 catalysts. To precisely elucidate the size effect of the Ni metal center on the CO 2 methanation performance, we prepared 2%Ni/CeO 2 catalysts with pre-synthesized uniform Ni particles (2, 4 and 8 nm) on a high surface area CeO 2 support. Transmission electron microscopy (TEM) and ambient pressure X-ray photo spectroscopy (AP-XPS) characterization have confirmed that the catalyst structure and chemical state was uniform and stable under reaction conditions. The 8 nm sized catalyst showed superior methanation selectivity over the 4 and 2 nm counterparts, and the methanation activity in term of TOF is 10 times and 70 times higher than for the 4 and 2 nm counterparts, respectively. Here, the DRIFTS studies revealed that the larger Ni (8 nm particles) over CeO 2 efficiently facilitated the hydrogenation of the surface formate intermediates, which is proposed as the rate determining step accounting for the excellent CO 2 methanation performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The electron affinity of astatine

One of the most important properties influencing the chemical behavior of an element is the electron affinity (EA). Among the remaining elements with unknown EA is astatine, where one of its isotopes, 211 At, is remarkably well suited for targeted radionuclide therapy of cancer. With the At - anion being involved in many aspects of current astatine labeling protocols, the knowledge of the electron affinity of this element is of prime importance. Here we report the measured value of the EA of astatine to be 2.41578(7) eV. This result is compared to state-of-the-art relativistic quantum mechanical calculations that incorporate both the Breit and the quantum electrodynamics (QED) corrections and the electron–electron correlation effects on the highest level that can be currently achieved for many-electron systems. The developed technique of laser-photo detachment spectroscopy of radioisotopes opens the path for future EA measurements of other radioelements such as polonium, and eventually super-heavy elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Free energy difference to create the M-OH* intermediate of the oxygen evolution reaction by time-resolved optical spectroscopy

Theoretical descriptors differentiate the catalytic activity of materials for the oxygen evolution reaction by the strength of oxygen binding in the reactive intermediate created upon electron transfer. Recently, time-resolved spectroscopy of a photo-electrochemically driven oxygen evolution reaction followed the vibrational and optical spectra of this intermediate, denoted M-OH*. However, these inherently kinetic experiments have not been connected to the relevant thermodynamic quantities. Here we discover that picosecond optical spectra of the Ti-OH* population on lightly doped SrTiO 3 are ordered by the surface hydroxylation. A Langmuir isotherm as a function of pH extracts an effective equilibrium constant relatable to the free energy difference of the first oxygen evolution reaction step. Thus, time-resolved spectroscopy of the catalytic surface reveals both kinetic and energetic information of elementary reaction steps, which provides a critical new connection between theory and experiment by which to tailor the pathway of water oxidation and other surface reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Collective excitations and low-energy ionization signatures of relativistic particles in silicon detectors

Abstract Solid-state detectors with a low energy threshold have several applications, including searches of non-relativistic halo dark-matter particles with sub-GeV masses. When searching for relativistic, beyond-the-Standard-Model particles with enhanced cross sections for small energy transfers, a small detector with a low energy threshold may have better sensitivity than a larger detector with a higher energy threshold. In this paper, we calculate the low-energy ionization spectrum from high-velocity particles scattering in a dielectric material. We consider the full material response including the excitation of bulk plasmons. We generalize the energy-loss function to relativistic kinematics, and benchmark existing tools used for halo dark-matter scattering against electron energy-loss spectroscopy data. Compared to calculations commonly used in the literature, such as the Photo-Absorption-Ionization model or the free-electron model, including collective effects shifts the recoil ionization spectrum towards higher energies, typically peaking around 4–6 electron-hole pairs. We apply our results to the three benchmark examples: millicharged particles produced in a beam, neutrinos with a magnetic dipole moment produced in a reactor, and upscattered dark-matter particles. Our results show that the proper inclusion of collective effects typically enhances a detector’s sensitivity to these particles, since detector backgrounds, such as dark counts, peak at lower energies.

Physics↗
DOE OSTI2023

Mapping the pathways of photo-induced ion migration in organic-inorganic hybrid halide perovskites

Abstract Organic-inorganic hybrid perovskites exhibiting exceptional photovoltaic and optoelectronic properties are of fundamental and practical interest, owing to their tunability and low manufacturing cost. For practical applications, however, challenges such as material instability and the photocurrent hysteresis occurring in perovskite solar cells under light exposure need to be understood and addressed. While extensive investigations have suggested that ion migration is a plausible origin of these detrimental effects, detailed understanding of the ion migration pathways remains elusive. Here, we report the characterization of photo-induced ion migration in perovskites using in situ laser illumination inside a scanning electron microscope, coupled with secondary electron imaging, energy-dispersive X-ray spectroscopy and cathodoluminescence with varying primary electron energies. Using methylammonium lead iodide and formamidinium lead iodide as model systems, we observed photo-induced long-range migration of halide ions over hundreds of micrometers and elucidated the transport pathways of various ions both near the surface and inside the bulk of the samples, including a surprising finding of the vertical migration of lead ions. Our study provides insights into ion migration processes in perovskites that can aid perovskite material design and processing in future applications.

14 SOLAR ENERGY↗
DOE OSTI2024

Laser-Induced Photoreduction of Iron(III) Oxide Nanoparticles Enhanced by the Presence of Organic Chromophores

Light-induced electron transfer between chromophoric organic matter and Fe(III)-oxides lies at the heart of aqueous Fe(II) fluxes in the photic zone of natural systems. Understanding this photoreductive dissolution process is also essential for developing water purification techniques based on this class of materials. Previously, optical transient absorption spectroscopy (TAS) measurements revealed that sub-picosecond relaxation times of photo-excited rhodamine B (RhB) dye increased when sorbed onto hematite nanoparticles (HNPs), consistent with electron transfer to the oxide. Here, in the present study, we exploit time-resolved X-ray absorption spectroscopy (XAS) at the Fe K-edge to follow the Fe oxidation state for this same process to (i) confirm that RhB photoexcitation leads to interfacial electron transfer and Fe reduction; and (ii) quantify the lifetime of injected electrons as a function of solution conditions. Regardless of RhB dye availability and pH, direct band gap photoexcitation of HNPs yields an Fe(II)-like small polaronic absorption signature with a lifetime of ~ 1 ns, an order of magnitude longer than previously reported. However, when RhB is present at low pH under conditions where dye favorably interacts with the positively charged hematite surface, a second relaxation process approaching microsecond timescales is observed that likely represents back-reaction with the photoexcited adsorbed dye. At pH above neutral, the efficiency of the interfacial electron transfer is diminished by weaker interaction between sorbed dye and particle surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2019

X-Ray Photoelectron Spectroscopy

The interaction of photon and the electron goes back to the early part of 19th century emanating from the photo-electric effect depicted by none other than Albert Einstein (Ref 1) described in 1905, and the redistribution of kinetic energy resulting from the interaction of x-ray and solids reported during early part of the century (Ref.2). The spectrum resolutions obtained at that time was not sufficient to observe distinct peaks in spectra for materials. Thus, these phenomena hardly attracted any attention for many years following these discoveries. The modern X-ray Photoelectron Spectroscopy (XPS) has been possible by the extensive and significant contribution from Kai Siegbahn and others (Ref.3, 4) of Uppsala University. Siegbahn developed and employed a high-resolution electron spectrometer that revealed electron peaks in a spectrum emerging from the interaction of x-rays and solids. Eventually, Kai Siegbahn received Nobel Prize in 1981 for his contributions to XPS. Around 1958, shifts in elemental peaks were realized in compounds when the same elements are bound to other but different elements. This discovery resulted in the chemical state identification in various chemicals as well as the oxidation states of atoms in compounds. Because of these useful physical effects, the Uppsala group named XPS with a synonymous name of ESCA (Electron Spectroscopy for Chemical Analysis) used widely today and will be used here alternatively. Therefore, XPS or ESCA not only identifies the element, but also the compound these elements form, from their chemical shifts. Compared to other micro-analytical techniques such as Energy Dispersive (EDS) or Wavelength Dispersive (WDS) techniques, XPS analyzes only few atomic layers present on the surface. This was discovered early in 1966 (Ref. 5). While this has awarded a merit to the analytical technique to analyze very thin layers such as films and coatings, it often analyzes the adsorbed superficial gases and contaminations on a sample introduced to its analytical chamber. This necessitates the surface is cleaned and the underlying material, material of interest, is exposed in a clean environment such that the material of interest is analyzed. The cleaning is accomplished by a scanning ion gun within the analytical chamber of the instrument. Ion gun uses an argon gas and is commonly attached in most modern machines. Reliable and efficient vacuum systems employed in modern machines does not allow adsorbed layers to rebuild after the surface is cleaned. Development of efficient and reliable vacuum pumps over these developmental years is yet another important step in the commercialization of XPS machines. Vacuum levels of better than 10-7 torr are essential to increase the mean free path of electrons released from the sample surface. Thus, modern machines are equipped with high capacity ion, turbo or cryogenic pumps in their analytical chambers. Today, XPS has advanced from an applied physics laboratory to industry for use in quality control as well as analysis of contaminants and has taken a dominant role in microanalysis. Its uniqueness arises from the fact that it is considered non-destructive compared to other common micro-analytical techniques using the electron and ion excitation sources. Polymers and plastics could be analyzed since the binding energies of saturated and unsaturated bonds in atoms could be separated. Extremely thin layers could be analyzed including materials with layered structures. The technique, though did not advance for many years, has now opened a new window for research as well as applications in industry due to its ability to separate and measure the chemical shifts in bound elements. Principles

Panda, Binayak↗
DOE OSTI2025

Phase segregation dynamics in mixed-halide perovskites revealed by plunge-freeze cryo-electron microscopy

Mixed-halide lead perovskites, with photoexcited charge-carrier properties suitable for high-efficiency photovoltaics, hold significant promise for high-efficiency tandem solar cells. However, phase segregation under illumination, where an iodide-rich phase forms carrier trap states, remains a barrier to application. This study employs plunge-freeze cryoelectron microscopy to visualize nanoscale phase segregation dynamics in CsPb(Br x I 1–x ) 3 films. By rapidly freezing the illuminated samples, we preserve transient photoexcited ion distributions for high-resolution structural and compositional analysis at the nanoscale. Cryogenic scanning transmission electron microscopy (STEM) techniques (electron energy loss spectroscopy [EELS] and 4D-STEM) captured the dynamics of photo-induced iodine migration from grain boundaries to centers, identified the buildup of anisotropic strain, and captured the heterogeneous evolution of this process within a single grain. These findings provide insight into microscopic phase segregation mechanisms and their dynamics, enhancing our understanding of mixed-halide perovskite photostability.

42 ENGINEERING↗
DOE OSTI2021

Electron Transfer Going the Distance: Mn-Doped ZnSe as a Model Photocatalytic System

In this work, time-resolved photoluminescence and transient absorption spectroscopy are used to examine the influence that long excited state lifetimes of Mn-doped nanocrystals have on the mechanisms of photo-induced electron transfer (PET) in photocatalytic systems. Mn-doped ZnSe nanocrystals can undergo PET over their nearly millisecond excited state lifetime, which enables electron transfer to viologens in solution over large encounter distances in comparison to molecular length scales. The long excited state lifetimes also enable diffusion of the excited nanocrystals over hundreds of nanometers in solution, allowing them to react with molecular species at nanomolar concentrations. The ability to capture and sustain optical energy in spin-forbidden transitions among crystal field states of the Mn ions opens opportunities to explore the influence that long excited state lifetimes have on photocatalytic reaction mechanisms involving molecular species such as CO 2 that can be difficult to concentrate or attach to nanocrystal surfaces.

14 SOLAR ENERGY↗
DOE OSTI2021

Element-specific investigations of ultrafast dynamics in photoexcited Cu2ZnSnS4 nanoparticles in solution

Ultrafast, light-induced dynamics in copper–zinc–tin–sulfide (CZTS) photovoltaic nanoparticles are investigated through a combination of optical and x-ray transient absorption spectroscopy. Laser-pump, x-ray-probe spectroscopy on a colloidal CZTS nanoparticle ink yields element-specificity, which reveals a rapid photo-induced shift of electron density away from Cu-sites, affecting the molecular orbital occupation and structure of CZTS. We observe the formation of a stable charge-separated and thermally excited structure, which persists for nanoseconds and involves an increased charge density at the Zn sites. Combined with density functional theory calculations, the results provide new insight into the structural and electronic dynamics of CZTS absorbers for solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Deconvolution of dynamic heterogeneity in protein structure

Heterogeneity is intrinsic to the dynamic process of a chemical reaction. As reactants are converted to products via intermediates, the nature and extent of heterogeneity vary temporally throughout the duration of the reaction and spatially across the molecular ensemble. The goal of many biophysical techniques, including crystallography and spectroscopy, is to establish a reaction trajectory that follows an experimentally provoked dynamic process. It is essential to properly analyze and resolve heterogeneity inevitably embedded in experimental datasets. We have developed a deconvolution technique based on singular value decomposition (SVD), which we have rigorously practiced in diverse research projects. In this review, we recapitulate the motivation and challenges in addressing the heterogeneity problem and lay out the mathematical foundation of our methodology that enables isolation of chemically sensible structural signals. We also present a few case studies to demonstrate the concept and outcome of the SVD-based deconvolution. Finally, we highlight a few recent studies with mechanistic insights made possible by heterogeneity deconvolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electron and ion spectroscopy of azobenzene in the valence and core shells

Azobenzene is a prototype and a building block of a class of molecules of extreme technological interest as molecular photo-switches. We present a joint experimental and theoretical study of its response to irradiation with light across the UV to x-ray spectrum. The study of valence and inner shell photo-ionization and excitation processes combined with measurement of valence photoelectron-photoion coincidence and mass spectra across the core thresholds provides a detailed insight into the site- and state-selected photo-induced processes. Photo-ionization and excitation measurements are interpreted via the multi-configurational restricted active space self-consistent field method corrected by second order perturbation theory. Using static modeling, we demonstrate that the carbon and nitrogen K edges of azobenzene are suitable candidates for exploring its photoinduced dynamics thanks to the transient signals appearing in background-free regions of the NEXAFS and XPS.

Chemistry↗
DOE OSTI2023

Metal–Carbodithioate-Based 3D Semiconducting Metal–Organic Framework: Porous Optoelectronic Material for Energy Conversion

Solar energy conversion requires the working compositions to generate photoinduced charges with high potential and the ability to deliver charges to the catalytic sites and/or external electrode. These two properties are typically at odds with each other and call for new molecular materials with sufficient conjugation to improve charge conductivity but not as much conjugation as to overly compromise the optical band gap. In this work, we developed a semiconducting metal-organic framework (MOF) prepared explicitly through metal-carbodithioate"(-CS 2 ) n M" linkage chemistry, entailing augmented metal-linker electronic communication. The stronger ligand field and higher covalent character of metal-carbodithioate linkages-when combined with spirofluorene-derived organic struts and nickel-(II) ion-based nodes-provided a stable, semiconducting 3D-porous MOF, Spiro-CS 2 Ni. This MOF lacks long-range ordering and is defined by a flexible structure with non-aggregated building units, as suggested by reverse Monte Carlo simulations of the pair distribution function obtained from total scattering experiments. The solvent-removed "closed pore"material recorded a Brunauer-Emmett-Teller area of similar to 400m 2 /g, where the "open pore" form possesses90 wt % solvent-accessible porosity. Electrochemical measurements suggest that Spiro-CS 2 Ni possesses a band gap of 1.57 eV(sigma = 10 -7 S/cm at -1.3 V bias potential),which can be further improved by manipulating the d-electron configuration through an axial coordination (ligand/substrate), the latter of which indicates usefulness as an electrocatalyst and/or a photoelectrocatalyst(upon substrate binding). Transient-absorption spectroscopy reveals a long-lived photo-generated charge-transfer state (τ CR = 6.5 mu s) capable of chemical transformation under a biased voltage. Spiro-CS 2 Ni can endure a compelling range of pH(1-12 for weeks) and hours of electrochemical and photoelectrochemical conditions in the presence of water and organic acids. We believe this work provides crucial design principles for low-density, porous,light-energy-conversion materials.

36 MATERIALS SCIENCE↗