Search NASA⌕ Search

SEARCH · Search NASA

Results for “plate motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Pacific-North American plate motion from very long baseline interferometry compared with motion inferred from magnetic anomalies, transform faults, and earthquake slip vectors

Geodetic VLBI measurements were used to test whether the Pacific-North American plate velocity averaged over several years of direct observation (1984-1987) equals that averaged over millions of years. It was also tested whether this velocity parallels the San Andreas fault, transform faults and earthquake slip vectors in the Gulf of California, and earthquake slip vectors along the Queen Charlotte fault, along the Alaskan peninsula, and along the Kamchatkan peninsula. The VLBI data provide an estimate of the direction of plate motion that is independent of estimates from fault azimuths and earthquake slip vectors. The Euler vector determined from VLBI was found to be nearly identical to the Euler vector of plate motion model NUVEL-1, which is based on the trends of transform faults, earthquake slip vectors, and spreading rates from marine magnetic anomalies that average motion since 3 Ma. The velocity between the Pacific and North American plates averaged over the past several years equals or nearly equals its velocity averaged over the past several million years, the difference along their boundary nowhere exceeding 4 + or - 7 mm/yr.

Argus, Donald F.↗
NASA NTRS1986

Plate motions and deformations from geologic and geodetic data

Research effort on behalf of the Crustal Dynamics Project focused on the development of methodologies suitable for the analysis of space-geodetic data sets for the estimation of crustal motions, in conjunction with results derived from land-based geodetic data, neo-tectonic studies, and other geophysical data. These methodologies were used to provide estimates of both global plate motions and intraplate deformation in the western U.S. Results from the satellite ranging experiment for the rate of change of the baseline length between San Diego and Quincy, California indicated that relative motion between the North American and Pacific plates over the course of the observing period during 1972 to 1982 were consistent with estimates calculated from geologic data averaged over the past few million years. This result, when combined with other kinematic constraints on western U.S. deformation derived from land-based geodesy, neo-tectonic studies, and other geophysical data, places limits on the possible extension of the Basin and Range province, and implies significant deformation is occurring west of the San Andreas fault. A new methodology was developed to analyze vector-position space-geodetic data to provide estimates of relative vector motions of the observing sites. The algorithm is suitable for the reduction of large, inhomogeneous data sets, and takes into account the full position covariances, errors due to poorly resolved Earth orientation parameters and vertical positions, and reduces baises due to inhomogeneous sampling of the data. This methodology was applied to the problem of estimating the rate-scaling parameter of a global plate tectonic model using satellite laser ranging observations over a five-year interval. The results indicate that the mean rate of global plate motions for that interval are consistent with those averaged over several million years, and are not consistent with quiescent or greatly accelerated plate motions. This methodology was also used to provide constraints on deformation in the western U.S. using very long baseline interferometry observations over a two-year period.

Jordan, T. H.↗
NASA NTRS1986

Plate motion controls on back-arc spreading

The motions of the subducting and the overriding plates influence the spatial and temporal distribution of back-arc spreading. Cenozoic plate motions in hot spot-fixed and no-net-rotation reference frames were studied with attention to correlations between changes in motion and episodes of back-arc spreading in the western Pacific. The results suggest that major back-arc opening occurs when both the overriding plate retreats from the trench in an absolute sense and the subducting plate undergoes a significant speed-up. Neither phenomenon alone is sufficient to initiate spreading. Three major plate velocity increases can be identified in the Cenozoic: (1) the Pacific plate 5-9 Ma; (2) the Indian plate at 27 Ma; and (3) the Pacific plate at 43 Ma, due to its shift from northerly to more westerly motion. At the present time, the Indian and Philippine are the only overriding plates that are retreating from their Pacific trenches and back-arc spreading occurs only on these two retreating plates. Although the Indian plate has been retreating for at least 25 Ma, back-arc spreading began only following the Pacific plate speed-up 5-9 Ma. Earlier, during the Indian plate speed-up, no overriding plates were retreating strongly and no back-arc spreading epsiodes are preserved from this time. For the earliest Pacific plate shift at 43 Ma, the Eurasian plate was not advancing, thus creating the only favorable plate kinematic conditions in the Cenozoic for back-arc basin formation in this region. It is unclear whether extension in the Japan Sea is a result of these conditions.

Fein, J. B.↗
NASA NTRS1993

Earthquake slip vectors and estimates of present-day plate motions

Two alternative models for present-day global plate motions are derived from subsets of the NUVEL-1 data in order to investigate the degree to which earthquake slip vectors affect the NUVEL-1 model and to provide estimates of present-day plate velocities that are independent of earthquake slip vectors. The data set used to derive the first model excludes subduction zone slip vectors. The primary purpose of this model is to demonstrate that the 240 subduction zone slip vectors in the NUVEL-1 data set do not greatly affect the plate velocities predicted by NUVEL-1. A data set that excludes all of the 724 earthquake slip vectors used to derive NUVEL-1 is used to derive the second model. This model is suitable as a reference model for kinematic studies that require plate velocity estimates unaffected by earthquake slip vectors. The slip-dependent slip vector bias along transform faults is investigated using the second model, and evidence is sought for biases in slip directions along spreading centers.

Demets, Charles↗
NASA NTRS1985

Observing tectonic plate motions and deformations from satellite laser ranging

The scope of geodesy has been greatly affected by the advent of artificial near-earth satellites. The present paper provides a description of the results obtained from the reduction of data collected with the aid of satellite laser ranging. It is pointed out that dynamic reduction of satellite laser ranging (SLR) data provides very precise positions in three dimensions for the laser tracking network. The vertical components of the stations, through the tracking geometry provided by the global network and the accurate knowledge of orbital dynamics, are uniquely related to the center of mass of the earth. Attention is given to the observations, the methodologies for reducing satellite observations to estimate station positions, Lageos-observed tectonic plate motions, an improved temporal resolution of SLR plate motions, and the SLR vertical datum.

Christodoulidis, D. C.↗
NASA NTRS1991

No-net-rotation model of current plate velocities incorporating plate motion model NUVEL-1

NNR-NUVEL1 is presented which is a model of plate velocities relative to the unique reference frame defined by requiring no-net-rotation of the lithosphere while constraining relative plate velocities to equal those in global plate motion model NUVEL-1 (DeMets et al., 1990). In NNR-NUVEL1, the Pacific plate rotates in a right-handed sense relative to the no-net-rotation reference frame at 0.67 deg/m.y. about 63 deg S, 107 deg E. At Hawaii the Pacific plate moves relative to the no-net-rotation reference frame at 70 mm/yr, which is 25 mm/yr slower than the Pacific plate moves relative to the hotspots. Differences between NNR-NUVEL1 and HS2-NUVEL1 are described. The no-net-rotation reference frame differs significantly from the hotspot reference frame. If the difference between reference frames is caused by motion of the hotspots relative to a mean-mantle reference frame, then hotspots beneath the Pacific plate move with coherent motion towards the east-southeast. Alternatively, the difference between reference frames can show that the uniform drag, no-net-torque reference frame, which is kinematically equivalent to the no-net-rotation reference frame, is based on a dynamically incorrect premise.

Argus, Donald F.↗
NASA NTRS1984

Statistical tests of additional plate boundaries from plate motion inversions

The application of the F-ratio test, a standard statistical technique, to the results of relative plate motion inversions has been investigated. The method tests whether the improvement in fit of the model to the data resulting from the addition of another plate to the model is greater than that expected purely by chance. This approach appears to be useful in determining whether additional plate boundaries are justified. Previous results have been confirmed favoring separate North American and South American plates with a boundary located beween 30 N and the equator. Using Chase's global relative motion data, it is shown that in addition to separate West African and Somalian plates, separate West Indian and Australian plates, with a best-fitting boundary between 70 E and 90 E, can be resolved. These results are generally consistent with the observation that the Indian plate's internal deformation extends somewhat westward of the Ninetyeast Ridge. The relative motion pole is similar to Minster and Jordan's and predicts the NW-SE compression observed in earthquake mechanisms near the Ninetyeast Ridge.

Stein, S.↗
NASA NTRS1975

Absolute plate motions by boundary velocity minimizations

The main interaction of the earth's interior with the lithosphere is as a material source and sink. An absolute reference frame defined by minimizing the translational motion of tectonic plate boundaries differs by 0.6 cm/year from a frame defined by hot spot traces and by 0.4 cm/year from the frame defined by the most plausible model of drag forces on the plates. The rms absolute translational velocities are about 2 cm/year for ocean-ocean plate boundaries and 1.5 cm/year for ocean-continent plate boundaries. The close agreement between the source and sink and the drag-dependent definitions suggests that the lithosphere, as a stress guide, to some extent controls the locations of its sources and sinks.

Kaula, W. M.↗
NASA NTRS1991

Tomography, the geoid and plate motions

The dynamics of the earth's mantle and its relationship to mantle structure as revealed by seismic tomography, the geoid, and plate motions are discussed in a critical review of U.S. research from the period 1987-1990. Sections are devoted to plates and mantle convection; seismic anomalies, flow, and the geoid; subducted slabs and the 670-km discontinuity; the physical properties of the mantle; plumes; and computational and experimental modeling efforts. Also included is a comprehensive bibliography for the period.

Gable, Carl W.↗
NASA NTRS1977

Present-day plate motions

A data set comprising 110 spreading rates, 78 transform fault azimuths and 142 earthquake slip vectors was inverted to yield a new instantaneous plate motion model, designated RM2. The mean averaging interval for the relative motion data was reduced to less than 3 My. A detailed comparison of RM2 with angular velocity vectors which best fit the data along individual plate boundaries indicates that RM2 performs close to optimally in most regions, with several notable exceptions. On the other hand, a previous estimate (RM1) failed to satisfy an extensive set of new data collected in the South Atlantic Ocean. It is shown that RM1 incorrectly predicts the plate kinematics in the South Atlantic because the presently available data are inconsistent with the plate geometry assumed in deriving RM1. It is demonstrated that this inconsistency can be remedied by postulating the existence of internal deformation with the Indian plate, although alternate explanations are possible.

Minster, J. B.↗
NASA NTRS1988

Intraplate deformation, stress in the lithosphere and the driving mechanism for plate motions

During this period work was carried out on three fronts relevant to the understanding of intraplate deformation, stress in the lithosphere, and the driving mechanisms for plate motions: (1) observational constraints, using GPS geodesy on the deformation in the region of the boundry between the Pacific and North American plates in central and southern California; (2) numerical modeling of the effects of temperature dependent lithospheric viscosity on the stress and strain history of extensional regimes; and (3) improvement of estimates of mantle viscosity variation, the long-wave-length density variations in the mantle, and the topography of the core-mantel boundary from modeling of geoid anomalies, nutation, and changes in length of day. These projects are described in more detail, followed by a discussion of meetings attended and a list of abstracts and papers submitted and/or published.

Hager, Bradford H.↗
NASA NTRS1992

Variation of seismic slip in the Gulf of California and the possible effect on geodetic measurements of Pacific-North American plate motion

A simple dislocation model is used to evaluate the variation of seismic slip in the Gulf of California and the possible effect on geodetic measurements of Pacific-North American plate motion by means of an estimation of the surface displacements due to typical transform events in the gulf. The results of this numerical calculation suggest that if a large transform event (about 1.5 x 10 exp 26 dyne cm) were to occur within 100 to 200 km of a geodetic baseline, the relative distance measurements could be affected by up to 15 mm. This is marginally at the error level of a few millimeters plus 2 parts in 10 exp 8 of baseline length for GOMEX measurements, which thus are sensitive only to the far-field displacement along the plate boundary.

Tajima, Fumiko↗
NASA NTRS1985

The satellite magnetic anomaly of Ahaggar - Evidence for African Plate motion

The Ahaggar volcanic province of North Central Africa is considered a region of excess heat flow (hot spot) and hence elevated Curie isotherm. Using a modified version of the Parker FFT potential field representation, magnetic signals were calculated at Magsat altitudes for models in which the African Plate is both fixed and moving. The moving-plate model extends the Curie isotherm anomaly in the direction of plate motion and provides a satisfactory match to vertical component anomaly data when the magnitude of plate velocity is 0.75 cm/yr. Although the signal levels are marginal for the scalar component anomalies of this region, the same model provides an adequate match to this data set and is clearly preferable to a fixed-plate model.

Phillips, R. J.↗
NASA NTRS1993

Intraplate deformation, stress in the lithosphere and the driving mechanism for plate motions

The initial research proposed was to use the predictions of geodynamical models of mantle flow, combined with geodetic observations of intraplate strain and stress, to better constrain mantle convection and the driving mechanism for plate motions and deformation. It is only now that geodetic observations of intraplate strain are becoming sufficiently well resolved to make them useful for substantial geodynamical inference to be made. A model of flow in the mantle that explains almost 90 percent of the variance in the observed longwavelength nonhydrostatic geoid was developed.

Albee, Arden L.↗
NASA NTRS1986

North American-Pacific relative plate motion in southern California from interferometry

VLBI measurements of baselines crossing the San Andreas fault zone in southern California have provided observational constraints on rates of elastic tectonic strain accumulation. The single site located near this fault (the JPL site) moves in a direction concordant with the Pacific plate motion vector but at approximately half the net rate relative to North America. This motion agrees approximately in amount with geologically determined displacement rates on the San Andreas fault alone but not with the local strike of the fault. When considered together with complementary geodetic data, these results suggest a complex relation between the short-term accumulation of elastic strain and its permanent accommodation on existing faults.

Lyzenga, G. A.↗
NASA NTRS1986

Plate motions and deformations from geologic and geodetic data

A satellite laser ranging experiment conducted by NASA since 1972 has measured the relative motion between the North America and Pacific plates in California. Based on these measurements, the 896-km distance between San Diego and Quincy, California, is shortening at 62 + or - 9 mm/yr. This geodetic estimate is consistent with the rate of motion between the two plates, calculated from geological data to be 53 + or - 3 mm/yr averaged over the past few million years.

Jordan, T. H.↗