Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymer stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1966

Polymer film exhibits thermal and radiation stability

Aromatic/heterocyclic polymers /Pyrrones/ have the ability to absorb large quantities of photolytic, thermal and radiolytic energies while retaining their useful properties. They are prepared from the room temperature reaction of tetraamines and tetraacids.

Bell, V. L., Jr.↗
DOE OSTI2021

A Polymer-in-Salt Electrolyte with Enhanced Oxidative Stability for Lithium Metal Polymer Batteries

Lithium (Li) metal polymer batteries (LMPBs) are a promising candidate of solid-state batteries with high safety. However, rare progress has been demonstrated so far in high voltage stability of polyethylene oxide (PEO) based polymer electrolytes for LMPBs. Herein, we revived the polymer-in-salt electrolyte (PISE) strategy based on the PEO-LiFSI system with EO/Li = 8 through a dry process to avoid the contamination of the residual solvent. The obtained PISEs exhibit quite different morphologies and coordination structures which greatly enhance the oxidative stability of polymer electrolytes. P(EO)1LiFSI has a low melting temperature, a high ionic conductivity at 60 ?C and an oxidative stability of ~4.5 V vs. Li/Li+ (overcoming the inherent low oxidative stability of PEO). With an effective interphase rich in inorganic species, in combination with good stability of the hybrid polymer electrolyte towards Li metal, the cycling stability of Li||LiNi1/3Co1/3Mn1/3O2 is greatly improved. The LMPB can retain 74.4% of capacity after 186 cycles at 60 ?C under the charge cutoff voltage of 4.3 V. The findings point out a promising strategy to develop high-voltage stable polymer electrolytes for high energy-density and safe LMPBs.

Polymer-in-salt electrolyte, lithium metal battery↗
DOE OSTI2022

Crosslinked Polyethyleneimine Gel Polymer Interface to Improve Cycling Stability of RFBs

Redox flow batteries are considered a promising technology for grid energy storage. However, capacity decay caused by crossover of active materials is a universal challenge for many flow battery systems, which are based on various chemistries. In this paper, using the vanadium redox flow battery as an example, we demonstrate a new gel polymer interface (GPI) consisting of crosslinked polyethyleneimine with a large amount of amino and carboxylic acid groups introduced between the positive electrode and the membrane. The GPI functions as a key component to prevent vanadium ions from crossing the membrane, thus supporting stable long-term cycling. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were conducted to investigate the effect of GPI on the electrochemical properties of graphitic carbon electrodes (GCFs) and redox reaction of catholyte. X-ray photoelectron spectroscopy (XPS) and 1 H nuclear magnetic resonance (NMR) spectra demonstrated that the crosslinked GPI is chemically stable for 100 cycles without dissolution of polymers and swelling in the strong acidic electrolytes. Results from inductively coupled plasma mass spectrometry (ICP-MS), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy proved that the GPI is effective in maintaining the concentration of vanadium species in their respective half-cells, resulting in improved cycling stability because of it prevents active species from crossing the membrane and stabilizes the oxidation states of active species.

Lim, Hyung-Seok↗
DOE OSTI2021

SU(n) and Quantum SU(n) Symmetries in Physical Systems [Slides]

Presence of SU(n) or other Lie group symmetry in a physical system is its powerful, usually underutilized property. In many cases it allows for finding analytical solutions to nonlinear differential equations describing this system. Power of the method is presented on diversified examples from mathematical physics: Lie-group symmetries in finding solutions of generalized, multidimensional theory of gravity; analytical Dirac–equation solutions for description of conducting polymers; stability of qubit states in quantum computers; spatial defects in condensed matter; reconstruction of 3D object from its 2D tomographic image; significant improvement of numerical solutions stability for Euler equations. The next question after obtaining such Lie group symmetric solution is: does a generalized solution with appropriate quantum group symmetry exists for the given physical system, and if yes what is the physical meaning of the deformation parameter q introduced by such solution. In many cases it can be identified. Any SU(n) solution is by its nature singular, assuming a perfect symmetry of the physical system discussed. Such solution gives a powerful insight to theoretical physics, yet the assumption may be too demanding for experimental applications. Deformation parameter q from a quantum group symmetry allows for a continuum of solutions, more applicable to experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1975

Investigation of space radiation effects in polymeric film-forming materials

The literature search in the field of ultraviolet radiation effects that was conducted during the previous program, Contract No. NAS1-12549, has been expanded to include the effects of charged particle radiation and high energy electromagnetic radiation. The literature from 1958 to 1969 was searched manually, while the literature from 1969 to present was searched by using a computerized keyword system. The information generated from this search was utilized for the design of an experimental program aimed at the development of materials with improved resistance to the vacuum-radiation environment of space. Preliminary irradiation experiments were performed which indicate that the approaches and criteria employed are very promising and may provide a solution to the challenging problem of polymer stability to combined ultraviolet/high energy radiation.

Giori, C.↗
DOE OSTI2020

Polymer Zwitterions for Stabilization of CsPbBr 3 Perovskite Nanoparticles and Nanocomposite Films

Functional polymers with sulfobetaine or phosphorylcholine zwitterions as pendent groups are demonstrated as both ligands and host matrices for CsPbBr 3 perovskite nanoparticles (PNPs). These polymers produce nanocomposite films with excellent NP dispersion, optical transparency, and impressive resistance to NP degradation upon exposure to water. Multidentate interactions of the zwitterion-containing copolymers with the PNPs induce dispersed or weakly aggregated nanocomposite morphologies, depending on the extent of zwitterionic functionality in the polymer. Incorporating additional functionality into the polymers, such as benzophenone pendent groups, yields lithographically patternable films, while time-resolved photoluminescence measurements provide insight into the electronic impact of PNPs in zwitterionic polymer matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Polymer Zwitterions for Stabilization of CsPbBr 3 Perovskite Nanoparticles and Nanocomposite Films

Abstract Functional polymers with sulfobetaine or phosphorylcholine zwitterions as pendent groups are demonstrated as both ligands and host matrices for CsPbBr 3 perovskite nanoparticles (PNPs). These polymers produce nanocomposite films with excellent NP dispersion, optical transparency, and impressive resistance to NP degradation upon exposure to water. Multidentate interactions of the zwitterion‐containing copolymers with the PNPs induce dispersed or weakly aggregated nanocomposite morphologies, depending on the extent of zwitterionic functionality in the polymer. Incorporating additional functionality into the polymers, such as benzophenone pendent groups, yields lithographically patternable films, while time‐resolved photoluminescence measurements provide insight into the electronic impact of PNPs in zwitterionic polymer matrices.

Kim, Hyunki↗
DOE OSTI2023

Single Ion Conducting Hairy Nanoparticle Additive to Improve Cycling Stability of Solid Polymer Electrolytes

The development of a solid electrolyte that can impede dendrite growth while still maintaining an appropriate level of conductivity is essential for improving performance of solid-state Li-ion battery. In this paper, we report the synthesis of single Li-ion conducting hairy nanoparticle (NP) materials that improved the cycling stability of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-doped poly(ethylene oxide) (PEO) solid electrolyte without significant reduction in conductivity. To unveil mechanisms leading to improved cycling stability, several characterization techniques including broadband dielectric spectroscopy, differential scanning calorimetry, small angle X-ray scattering, transmission electron microscopy, and shear rheology were used to study properties of polymer composites (PC) with added hairy NPs. It was found that hairy NPs influenced the Li/electrolyte interface and improved mechanical properties of bulk composites, all of which contributed to homogenous Li plating and stripping. The improved performance has been found in composites with concentrations of 4.8 and 9.1 weight % of added hairy NPs, which enabled Li cycling stability at 0.2 mA cm–2 critical current density (>300 h) that was otherwise not possible in either PEO-LiTFSI alone or PEO-LiTFSI composites containing a polymer identical to that attached to hairy NPs. Based on the discovered ability of hairy NP to influence bulk and interfacial properties of solid electrolyte, their use as additives is expected to be equally effective in reducing dendrite formation in other electrolytes relevant for the design of solid-state battery.

25 ENERGY STORAGE↗
DOE OSTI2023

Improving nanoparticle superlattice stability with deformable polymer gels

The self-assembly of colloidal nanoparticles into ordered superlattices typically uses dynamic interactions to govern particle crystallization, as these non-permanent bonds prevent the formation of kinetically trapped, disordered aggregates. However, while the use of reversible bonding is critical in the formation of highly ordered particle arrangements, dynamic interactions also inherently make the structures more prone to disassembly or disruption when subjected to different environmental stimuli. Thus, there is typically a trade-off between the ability to initially form an ordered colloidal material and the ability of that material to retain its order under different conditions. Here, we present a method for embedding colloidal nanoparticle superlattices into a polymer gel matrix. This encapsulation strategy physically prevents the nanoparticles from dissociating upon heating, drying, or the introduction of chemicals that would normally disrupt the lattice. However, the use of a gel as the embedding medium still permits further modification of the colloidal nanoparticle lattice by introducing stimuli that deform the gel network (as this deformation in turn alters the nanoparticle lattice structure in a predictable manner). Moreover, encapsulation of the lattice within a gel permits further stabilization into fully solid materials by removing the solvent from the gel or by replacing the solvent with a liquid monomer that can be photopolymerized. This embedding method therefore makes it possible to incorporate ordered colloidal arrays into a polymer matrix as either dynamic or static structures, expanding their potential for use in responsive materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Flammability and Photo-Stability of Selected Polymer Systems

A systematic approach to the improvement of the flammability of epoxy resins, bisphenol-A polycarbonate poly(butylene terephthalate), and Nylon 6.6 by introducing halogens and loop functionality into the flame retardants is described. The phthalides (the loop functionality containing molecules) include 3,3-bis(4-bromophenyl)-phthalide, 3,3-bis(4-chlorophenyl)phthalide, and phenolphthalein. The phthalide containing epoxy resins are synthesized and characterized in comparison with the bisphenol-A epoxy resins in terms of flammability in the copolymer systems. The resins include diglycidyl ethers of phenolphthalein, bisphenol-A. tetrabromobisphenol-A, and tetraoromophenolphthalein. The vaporization of the phthalide additive in the polymers is observed in Thermal Gravimetric Analysis. The flame retardancy is primarily due to the presence of halogens. In the poly(butylene terephthalate) system, the cleavage of the C(sub aromatic) -B bond of the flame retardant additive enhances the crosslinking react ions between the aromatic rings resulting in an increase of char formation. In the epoxy resin systems, loop functionality contributes to char formation to a larger extent. The interaction between the epoxy resin and poly-(butylene terephthalate) follows the mechanism of insertion of the oxirane ring into the ester bond. This mechanism is studied by FT-IR. The investigation of the thermal properties of the char-forming phenol-formaldehyde resins is conducted to provide information for the systematic design of high temperature flame-resistant phenolics. NMR and FT-IR are used to characterize the oligomeric resins and the cured resins. The curing agents used in the study include formaldehyde, s-trioxane and terephthaloyl chloride. The brominated phenolic resins are found to have higher oxygen indices with lower char yields.

Lo, Jeelin↗
DOE OSTI2024

Initial Progress on Tank Bottom Repair for the DOE EM Tank Waste R&D Program - 25089

Several years prior to the Lab23-EM001 Call Announcement, Washington River Protection Solutions (WRPS) had done a review in identifying tank repair feasibility. [1, 2] The most viable methods of repair identified for the Floor of a Primary Tank identified were Grout Stabilization and Polymer Grout. Grout Stabilization was described as a self-leveling grout which fills the entire bottom of the tank and creates a new or false bottom. These types of materials have been used at the Savannah River Site (SRS) to fill and close waste tanks as well as contaminated spaces within decommissioned reactors. No mention was made as to the chemical composition of these Stabilizing Grouts in the review, however, grouts used at SRS for the mentioned applications have always been a cementitious grout material. A thickness of approximately 12 inches was suggested in the review. It was also suggested that an additional polymeric coating could be applied to this fresh and clean grout surface.

BLUE, KAREEN↗