Search NASA⌕ Search

SEARCH · Search NASA

Results for “polysiloxane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Temperature-dependent changes in gas chromatographic separation metrics for trihexyl(tetradecyl)phosphonium-based ionic liquid stationary phases and comparison to conventional polysiloxane stationary phases

Here, to assess whether the trihexyl(tetradecyl)phosphonium chloride ([P 66614 + ][Cl - ]) ionic liquid (IL), employed as a gas chromatographic stationary phase, exhibits temperature-dependent phase transitions or structural heterogeneity, retention thermodynamics for probe molecules of varied chemical structure were investigated by gas chromatography (GC) over the temperature range of 25 to 64 °C using van’t Hoff analysis. All van’t Hoff plots for n-alkanes (C8–C12) and other probe analytes were linear, indicating the absence of detectable phase-transition behavior. The [P 66614 + ][Cl - ] IL was further compared with the [P 66614 + ] bis[(trifluoromethyl)sulfonyl]imide ([P 66614 + ][NTf 2 - ]) IL and commercial polysiloxane stationary phases in terms of temperature-dependent resolution behavior and chromatographic selectivity over the temperature range of 28–52 °C. The resolution factors of analytes in mixtures obtained using gas chromatography–mass spectrometry (GC–MS) and the summation of resolution values decreased smoothly with temperature on both IL stationary phases and on the dimethylphenylcyano-substituted polymeric stationary phase (OV-1701), whereas the poly(50% diphenyl/50% dimethyl siloxane) stationary phase (SPB-50) exhibited irregularities in its temperature-dependent summation of resolution profile, showing a distinct maximum in the temperature range of 34–40 °C. Selectivity values for the IL stationary phases were largely determined by the anion, with the [P 66614 + ][Cl - ] IL providing enhanced separation between polar and aromatic analytes, while the [P 66614 + ][NTf 2 - ] IL favored dispersive and π-π interactions that resulted in a reversal of elution order for some aliphatic–aromatic and alkyne-containing analyte pairs. Capillary columns prepared using different surface activation methods and coated with identical [P 66614 + ][Cl - ] IL stationary phase showed indistinguishable temperature-dependent trends in summation of resolution value and selectivity. An evaluation of analyte-specific selectivity provides insight into the characteristic separation behavior of the stationary phases and enables identification of analyte classes that are more efficiently separated on the [P 66614 + ]-based IL stationary phases compared to conventional stationary phase materials.

Chromatographic selectivity↗

Ultrathin polyorganosilica membranes synthesized by oxygen-plasma treatment of polysiloxanes for H 2 /CO 2 separation

Oxygen plasma treatment of polydimethylsiloxane (PDMS) induces an ultrathin polyorganosilica (POSi) layer (<10 nm) on top of a PDMS membrane, leading to excellent H 2 /gas separation properties and providing a rapid and scalable way to fabricate robust silica membranes compared with conventional high-temperature and time-consuming sol-gel methods. Here, we thoroughly investigate POSi membranes derived from poly (dimethylsiloxane-co-methylhydroxidesiloxane) (poly (DMS-co-MHOS)) containing -SiOH groups that can be more easily converted to silica networks than the -SiCH 3 in PDMS. Further, the effect of the polysiloxane structure and plasma treatment conditions (including plasma generating powers, oxygen flowrate, chamber pressure, and treatment time) on the silica chemistry, structure, and H 2 /CO 2 separation properties are systematically determined to derive structure/property relationships. An optimized membrane exhibits H 2 permeance of 880 GPU and H 2 /CO 2 selectivity of 67 at 150 °C, superior to state-of-the-art polymeric membranes. The membrane retains H 2 /CO 2 selectivity as high as 46 when challenged with simulated syngas containing 2.8 mol% water vapor at 150 °C, demonstrating the potential of these POSi membranes for practical applications.

36 MATERIALS SCIENCE↗

The effects of gamma irradiation on RTV polysiloxane foams

The present paper involves the investigation of ionizing radiation effects on silica filled poly (dimethyl siloxane) foam vulcanized at room temperature. In order to better predict aging effects in these materials, it is important to understand the influence of irradiation on structural-rheological property relationships. Polysiloxane foams were subjected to moderate doses of gamma irradiation in an inert atmosphere and characterized by thermal (DSC and TGA), chemical (FT-IR, NMR, Mössbauer, mass spectroscopy, EPR, solvent swelling), microscopy (SEM and AFM), and mechanical (uniaxial compressive load) techniques. Radiation exposure induced cross-linking reactions that predominated over chain scission reactions for the dose range investigated. No long-lived radiation-induced radicals were detected and the porous structure of the irradiated foam remained unchanged. Finally, radiation exposure resulted in gas evolution, decrease in crystallization levels, slight changes in chemistry, and decrease in the molecular weight between cross-links, thereby hardening the foam.

36 MATERIALS SCIENCE↗

Aging mechanisms in RTV polysiloxane foams

The long-term use of polysiloxane foams requires a good understanding of the diverse factors that may influence their performance. The aim of the present work was to understand the interplay between in-service environments and reactive species that reside in the foams. Two foams (SX358 and S5370) were thermally aged under compressive strain to gauge the onset of compression set, an indicator of degradation. In this study, experiments were performed by either aging the foams in open air containers or in high humidity environments. Our results indicated that foams aged in open air environments exhibited less compression set than when aged in presence of moisture. These results were analyzed in terms of post-curing reactions, hydrolysis and rearrangement of the network, which are promoted by active residues that are left in the foam from the curing process. In particular, the residues from tin octoate, the catalyst used in the cure of the foams, were identified and their role in promoting aging was determined. Reactions were either catalyzed by tin(II) species or by a combination of trace amounts of water and octanoic acid, a product of the hydrolysis of tin octoate. More precisely, this work demonstrated that reactive residues promote chemical changes in the polymer, which resulted in compression set. On the other hand, the oxidized residues of the tin octoate show no catalytic activity towards promoting condensation reactions between silanol groups. In conclusion, our work established that, depending on service conditions, certain residues are more harmful to the foam's lifetime than others.

36 MATERIALS SCIENCE↗

Thermophysical property and electrical conductivity of titanium isopropoxide – polysiloxane derived ceramics

In this work, high temperature resistant Si-O-C-Ti has been successfully prepared based on the pyrolysis of polysiloxane (PSO) and titanium (IV) isopropoxide (TTIP) at 1200–1400 °C. PSO can homogeneously mix with TTIP to enhance its conversion to TiC. The carbothermal reactions between TiO 2 (product of thermal decomposition of TTIP) and carbon result in the formation of TiC. All the Si-O-C-Ti composites pyrolyzed at 1200–1300 °C are stable up to 1000 °C in an oxidizing air atmosphere. TiC leads to high electrical conductivity at elevated temperatures; the maximum conductivity is 1176.55 S/m at 950 °C, which is the first reported value of >1000 S/m conductivity for Si-O-C-Ti ceramics. However, too high a pyrolysis temperature, such as 1400 °C, can potentially ‘destabilize’ the Si-O-C-Ti system by consuming the free carbon and result in lower conductivities.

36 MATERIALS SCIENCE↗

Polysiloxane coatings on microspheres based on Multiphase Flow with Interface Exchange-Discrete Element Modelling

Polysiloxane coatings on yttria stabilized zirconia (YSZ) microspheres of 500 μm were simulated in a spout fluidized bed coater using Multiphase Flow with Interface Exchange-Discrete Element Modelling (MFiX-DEM). In this work, two different coater configurations were developed to study the influence of gas velocity and its distribution on particle dynamics. The presence of the Wurster tube not only enhances the distribution but also increases the overall residence time of the particles. Investigations were also carried out with different Wurster tube positions (normal, 10% and 20% lowered from its initial position). Among these, 20% lowered Wurster tube position demonstrated the most effective coating process. The effects of gas inlet pressure on the average gas velocity and the distribution of particles were analyzed. More than 97% of the particles can be retained. The derived results, including average gas velocity, particle retention percentage, and distribution of particles with gas velocity, are being used to guide the experimental work in obtaining defect-free coatings for YSZ microspheres.

36 MATERIALS SCIENCE↗

Computational studies of polysiloxanes : oxidation potentials and decomposition reactions.

Silicon-containing solvents have tremendous potential for application as electrolytes for electrical energy storage devices such as lithium-ion (air) batteries and supercapacitors. Quantum chemical methods were employed to investigate trends in oxidation potentials and decomposition reactions of a series of polysiloxanes. Various electron-donating and -withdrawing substituents can be used to tune the oxidation potential in shorter chain siloxanes but not in longer ones. Decomposition reactions of siloxanes in their oxidized states were investigated and compared against their carbon analogues. These studies suggest that the Si-O group provides added stability for siloxanes over their carbon analogues. Computational studies have also been performed for various disiloxanes and siloxanes with spacer groups to understand their thermochemical stability and oxidation potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tracking copper nanofiller evolution in polysiloxane during processing into SiOC ceramic

Polymer-derived ceramics (PDCs) remain at the forefront of research for a variety of applications including ultra-high-temperature ceramics, energy storage and functional coatings. Despite their wide use, questions remain about the complex structural transition from polymer to ceramic and how local structure influences the final microstructure and resulting properties. This is further complicated when nanofillers are introduced to tailor structural and functional properties, as nanoparticle surfaces can interact with the matrix and influence the resulting structure. The inclusion of crystalline nanofiller produces a mixed crystalline–amorphous composite, which poses characterization challenges. With this study, we aim to address these challenges with a local-scale structural study that probes changes in a polysiloxane matrix with incorporated copper nanofiller. Composites were processed at three unique temperatures to capture mixing, pyrolysis and initial crystallization stages for the pre-ceramic polymer. We observed the evolution of the nanofiller with electron microscopy and applied synchrotron X-ray diffraction with differential pair distribution function (d-PDF) analysis to monitor changes in the matrix's local structure and interactions with the nanofiller. The application of the d-PDF to PDC materials is novel and informs future studies to understand interfacial interactions between nanofiller and matrix throughout PDC processing.

Chemistry↗

Magnetic resonance imaging techniques are being developed to measure the in-situ reactions of polysiloxanes

Polysiloxane foams utilized for stockpile applications experience changes over time induced by exposure to thermal, radiative, and mechanical stresses. The interplay of these stresses can lead to chemical and/or physical changes in the polymer, such as alterations of compression set. Understanding these mechanisms require us to understand the in-situ stress states that these polymeric foams are exposed to in the service environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly filled carbon nanofiber reinforced polysiloxanes

Provided herein are polysiloxane-based composite materials comprising a high weight percentage of elemental components (e.g., elemental boron, elemental copper, elemental bismuth, elemental lead) and low levels of carbon nanofibers. The elemental components may be present in the composite materials at levels greater than 25% by weight. Also provided herein are methods of forming the composite materials that have desirable flexibility and shielding properties. The invention provides a versatile composite material that is compliant and moldable, while still comprising high levels of the elemental shielding components. The materials are particularly useful for applications in which radiation shielding or neutron capture are desired.

Robison, Thomas Wayne↗

3D Printing Amorphous Polysiloxane Terpolymers via Vat Photopolymerization

Abstract Photocuring and vat photopolymerization (VP) additive manufacturing (AM) is reported for two families of fully amorphous poly(dimethyl siloxane) (PDMS) terpolymers containing either diphenylsiloxy (DiPhS) or diethylsiloxy (DiEtS) repeating units. A thiol‐functionalized PDMS crosslinker enables rapid crosslinking in air using efficient thiol–ene addition. Differential scanning calorimetry and dynamic mechanical analysis (DMA) confirm the absence of crystallinity for the DiPhS‐containing systems, while DMA shows a rubbery plateau extending to greater than 200 °C for the DiEtS‐containing system. VP‐AM of both photopolymer systems afford well‐defined 3D geometries, including high aspect ratio structures, which demonstrate feasibility of these photopolymers for the 3D printing of unique geometric objects that require elastomeric performance to temperatures as low as −120 °C.

Sirrine, Justin M.↗

Reactive Force Field for Simulations of the Pyrolysis of Polysiloxanes into Silicon Oxycarbide Ceramics

We provide a new reactive force field (ReaxFF) for simulations of silicon oxycarbide (SiCO) ceramics and of their syntheses from inorganic polymer precursors. The validity of the force field is extensively tested against experimental and computational thermochemical data. Its performance in simulation at elevated temperatures is gauged by the results of comprehensive ab initio molecular dynamics simulations. We apply the force field to the formation of amorphous SiCO in a simulated polymer pyrolysis. Modeling results are in good agreement with experimental observations and allow new insights into the formation of graphene segregations embedded in an amorphous oxycarbide matrix. The new ReaxFF for Si-C-O-H compounds enables large- scale and long-time atomistic simulations with unprecedented fidelity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗