Search NASA⌕ Search

SEARCH · Search NASA

Results for “preceramic polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Radiation stable, hybrid, chemical vapor infiltration/preceramic polymer joining of silicon carbide components

Here, this paper reports on a nuclear-grade joining material for bonding of silicon carbide-based components. The joint material is fabricated via a hybrid preceramic polymer, chemical vapor infiltration process. The joint is comprised entirely of β-SiC and results in excellent mechanical and permeability performance. The joint strength, composition, and microstructure have been characterized before and after irradiation to 4.5 dpa at 730 °C in the High Flux Isotope Reactor. The hybrid preceramic polymer-chemical vapor infiltrated joint exhibited complete retention of shear strength and no evidence of microstructural evolution or damage was detected following irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

The Influence of Residual Copper Catalyst on the Polymer-to-Ceramic Conversion of a Click-Derived Polycarbosilane

Preceramic polymers (PCPs) are a key class of materials for the preparation of advanced ceramic components. Following conventional polymer processing and subsequent pyrolysis, polymer-derived ceramic (PDC) fibers, monoliths, and composites offer novel engineering opportunities for aerospace applications. Despite the rapidly emerging commercial applications of PDCs, many basic scientific questions remain regarding the structural transformation of the polymer to the final ceramic and how processing variables affect PDC materials properties. PCPs prepared using a mild and scalable copper (Cu) catalyzed azide/alkyne “click” reaction have been demonstrated as a unique class of material that can bind with transition metals, ultimately producing ultrahigh temperature ceramics (UHTCs) upon pyrolysis. Unexpectedly, it was found that the removal of residual Cu catalyst from a model click-derived polycarbosilane PCP significantly reduced the ceramic yield during pyrolysis. Herein, we report the influence of Cu impurities on polycarbosilane-derived SiC ceramics and present a mechanistic understanding of the unintended role of Cu in the polymer-to-ceramic conversion process. Synchrotron-based scattering and spectroscopy methods were implemented to track the evolution of different atomic species and local structures as well as the influence of Cu toward atomic-scale structures in the final ceramics. It was determined that Cu impurities catalyze the formation of silicon carbide through the formation of an intermediate molten copper/copper silicide, ultimately increasing the ceramic yield. Overall, this contribution highlights the need to carefully assess the interplay between the chemistries needed for PCP synthesis and their potential influence on final PDCs following processing.

Ponder, Jr., James F. [Air Force Research Laborato↗
DOE OSTI2016

Literature Review of Polymer Derived Ceramics

Polymer Derived Ceramics (PDCs), also known as preceramic polymers, are valuable coating agents that are used to produce surface barriers on substrates such as stainless steel. These barriers protect against a multitude of environmental threats, and have been used since their research and development in 19772. This paper seeks to review and demonstrate the remarkable properties and versatility that PDCs have to offer, while also giving a brief overview of the processing techniques used today.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Oxidation performance and limitations of additively manufactured SiC/Si-O-C composites at elevated temperatures

Here, SiC preforms were infiltrated with polycarbosiloxane preceramic polymer to create low-cost SiC—Si x O y C z matrix composites for possible high temperature application. The effect of specimen annealing conditions on the steam and air oxidation resistance was analyzed. Air exposures from 900–1500°C showed stability of the Si x O y C z matrix phase with moderate oxidation resistance. After 900°C exposures, oxidation of the composite is primarily limited to the matrix phase, and only at 1200 and 1500°C was SiC consumption visualized. Steam cycle exposures at 1200°C resulted in rapid linear oxidation of the composites with induced specimen swelling from volume expansion associated with internal oxidation. Specimens annealed in argon were found to be the most oxidation resistant due to increased matrix crystallinity and carbon retention. The results of this work were used to develop clear strategies for improving the high-temperature properties of SiC—Si x O y C z composites.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Boron-carbon-silicon polymers and the ceramic thereof

The present invention relates to a process for the production of an organoborosilicon preceramic polymer. The prepolymer is pyrolyzed to produce a ceramic article useful in high temperature (e.g., aerospace) or extreme environmental applications.

Riccitiello, Salvatore R.↗
NASA NTRS2004

Ceramic Foams from Pre-Ceramic Polymer Routes for Reusable Acreage Thermal Protection System Applications

Contents include the following: Motivation. Current light weight insulation. Advantages of preceramic-polymer-derived ceramic foams. Rigid insulation materials. Tailor foam microstructures. Experimental approach. Results: sacrificial materials, sacrificial fillers. Comparison of foam microstructures. Density of ceramic foams. Phase evolution and properties: oxidation behavior. mechanical properties, aerothermal performance. Impact damage of microcellular foams. Conclusions.

Stackpoole, Mairead↗
NASA NTRS1992

Boron-carbon-silicon polymers and ceramic and a process for the production thereof

The present invention relates to a process for the production of an organoborosilicon preceramic polymer of the structure: wherein R 1 is selected from alkyl having from 1 to 10 carbon atoms or phenyl, and x is selected from 0, 1, 2 or 3; which is pyrolyzable to produce a refractory material comprising inorganic compounds of Si, C and B, which process comprises: contacting a silicon containing compound of the structure: (R 1 ) x --Si--(CH=CH 2 ) 4- x or (R 1 ) x Si--(C=CH) 4- x with a boron containing compound selected from H 3 B:BH 3 , H 3 B:NH 3 , BH 3 :N(R 2 ) 3 wherein R 2 is selected from methyl, ethyl, propyl, butyl or phenyl in an inert atmosphere at a temperature of between about 90° and 170° C. for between about 0.1 and 20 hr and recovering the prepolymer. The prepolymer is pyrolyzed to produce a ceramic article useful in high temperature (e.g., aerospace) or extreme environmental applications.

Salvatore Riccitiello↗
DOE OSTI2025

B‐Staging and Crosslinking of Polycarbosilane at Room Temperature: Cure Mechanism and Properties

The viscosity of polycarbosilane (PCS) polymers is not advantageous for free forming. Various fillers and heat are used to obtain a formable paste. Due to the low yield stress, structures and preforms tend to slump or resin will flow out, especially during the curing of the polymer. B-staging of PCS allows for a more stable structure from room temperature until the full cure of the allyl groups occurs with heat. Additionally, hydrosilation is an effective means of crosslinking at room temperature and controlling viscosity. A network structure was formed in SMP-10 using silane and a vinyl-based crosslinker to bridge each polymer chain. Pt addition catalysts were added to enhance the increase in viscosity to make a lightly crosslinked gel to aid in thickening and forming and to improve the ceramic yield at 1000°C. In conclusion, this enables several options for controlling rheology and improving the properties of preceramic polymers to avoid slumping during curing.

inorganic polymers↗
DOE OSTI2026

A Trifunctional Cyclohexasilane for Branched Poly(cyclosilane)s

The poly(cyclosilane)s are a class of hybrid inorganic-organic polymers with an all Si–Si backbone, arranged into repeating cyclohexasilane motifs, and mixed methyl and hydro side chains. The synthesis of a densely functionalized cyclosilane with three-fold symmetry enabled copolymerization studies yielding poly(cyclosilane)s with variable amounts of branching. The properties of the novel branched poly(cyclosilane)s were investigated and it was found that branching led to less volatilization during pyrolysis in an inert atmosphere, suggesting the utility of poly(cyclosilane)s for applications as preceramic polymers.

Coschigano, Marissa G. [Johns Hopkins University, ↗
DOE OSTI2019

A semi-empirical power-law model for the dip-coating of a substrate into a particle-containing, non-Newtonian, complex fluid system

The apparent viscosity of a particle suspension of ZrSi 2 particles, polyhydromethylsiloxane (PHMS) preceramic polymer and n-Octane solvent, used to process polymer-derived ceramic composite coatings, is shown by viscometric experiments to be shear-thinning. The suspension is dip-coated onto substrates and the measured entrained coating thickness, h 0 , is observed to be a power-law function of U, the substrate extraction speed, as h 0 = 0.5051U 0.5 . The experimentally observed semi-empirical model is directly compared to the results of a variety of theoretically derived Landau-Levich scaling laws and other models that have similar liquids and that include other effects. None of these cases predicts the scaling observed in these experiments. A correction factor is introduced to quantify the difference between the semi-empirical model with existing theoretical models. Possible explanations for the observed scaling behavior are presented.

36 MATERIALS SCIENCE↗
DOE OSTI2018

X-ray computed tomography of microstructure evolution during matrix impregnation and curing in unidirectional fiber beds

Microstructural evolution during axial impregnation and subsequent curing of a preceramic polymer in unidirectional ceramic fiber beds is studied using X-ray computed tomography. The principal goal is to identify connections between void locations, void sizes, local fiber bed porosity, fiber movement, and impregnation conditions. The degree of saturation after impregnation is found to increase with instantaneous capillary number. But, because of the need to create pathways for gas escape during curing, fiber beds with high saturation after impregnation show the largest reductions in saturation during curing. Notwithstanding, saturation after curing increases with instantaneous capillary number. Voids tend to form in the largest channels between fibers, where the local fiber bed porosity is high, during both impregnation and curing. Here, void formation is typically accompanied by fiber movement that increases both the local fiber bed porosity near voids and the overall non-uniformity in the fiber bed, as measured by local porosity entropy.

(A - Material) fibers↗
DOE OSTI2026

Siloxane-modified polycarbosilane flexible Prepregs for fabrication of ceramic matrix composites via compression molding and PIP densification

For this work, the development of ceramic matrix composites (CMCs) using 5 harness satin carbon fiber fabric impregnated with commercial polycarbosilane precursor plasticized by siloxane copolymer was investigated aiming to improve wetting behavior and shape conformability. The polycarbosilane precursor and polysiloxane plasticizer were mixed at varying weight ratios to obtain flexible preceramic resin prepreg cloths. 13 plies of preceramic polymer prepreg cloths were stacked in 0/90° layup and cured by compression molding, followed by densified via PIP process. The CMCs were densified with eight PIP cycles followed by final crystallization at 1600 °C. The CMCs made with 10 wt% polysiloxane loading showed lower viscosity of the prepreg resin as well as higher strength and displacement to failure compared to those fabricated from unplasticized polycarbosilane prepolymer. In contrast, at higher concentration of plasticizer, viscosity of the prepreg resin increased, and the CMC became more brittle; however, it exhibited considerably higher thermal conductivity.

Carbosilane↗
DOE OSTI2020

Tailorable Micelle Morphology in Self-Assembling Block Copolymer Gels for Templating Nanoporous Ceramics

The self-assembly of block copolymers offers opportunities for the facile organization and templating of inorganic nanomaterials. Here, we describe a morphology map for a poly(methyl methacrylate)-b-poly(n-butyl acrylate)-b-poly(methyl methacrylate) (PMMA-b-PnBA-b-PMMA) block copolymer/polycarbosilane system that allows for tunable control over nanoscale micelle geometry via manipulation of the preceramic polymer content. We produced gels with spherical, wormlike, and bicontinuous morphologies, which were processed to create silicon carbide-based ceramic structures with tunable nanoscale porosities. The role of the constituent polymers in influencing the structure and rheology of this system is discussed. The PMMA-b-PnBA-b-PMMA block copolymer/preceramic polymer system offers a number of advantages including: (i) commercial availability, (ii) rapid self-assembly kinetics, and (iii) successful conversion of the self-assembled nanostructure to ceramic via pyrolysis. Finally, this system may be useful for catalytic, structural, or thermal applications in both industrial and academic settings because of its ease of use and relatively inexpensive reagents.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Composite Synthesis Methodology Development: Nanocrvstalline SiC and Ti 3 SiC 2 Alloys for Reactory Materials – Outline of initial synthesis capabilities M4CT-13PN0405034

We have identified three initial preceramic polymers to help produce the SiC-based alloys for this project and have developed simple processing steps to make SiC-based alloy ceramics. The use of unfilled SMP-10 (Polycarbosilane) or SMP-877 (Methyl-Polycarbosilane) is not feasible due to the large mass losses that occur during pyrolysis. The pre-gelling steps below save time when those two polymers are filled with powders. The use of SL-MS30 provides us with a SiC-filled polymer that can be used to test out the CNT mats without further complications due to other powders.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Nanocrystalline SiC and Ti 3 SiC 2 Alloys for Reactor Materials: Annual Report

A new dual-phase nanocomposite of Ti 3 SiC 2 /SiC is being synthesized using preceramic polymers, ceramic powders, and carbon nanotubes (CNTs) designed to be suitable for advanced nuclear reactors and perhaps as fuel cladding. The material is being designed to have superior fracture toughness compared to SiC, adequate thermal conductivity, and higher density than SiC/SiC composites. This annual report summarizes the progress towards this goal and reports progress in understanding certain aspects of the material behavior but some shortcomings in achieving full density or in achieving adequate incorporation of CNTs. The measured thermal conductivity is adequate and falls into an expected range based on SiC and Ti 3 SiC 2 . Part of this study makes an initial assessment for Ti 3 SiC 2 as a barrier to fission product transport. Ion implantation was used to introduce fission product surrogates (Ag and Cs) and a noble metal (Au) in Ti 3 SiC 2 , SiC, and a synthesized at PNNL. The experimental results indicate that the implanted Ag in SiC is immobile up to the highest temperature (1273 K) applied in this study; in contrast, significant out-diffusion of both Ag and Au in MAX phase Ti₃SiC₂ occurs during ion implantation at 873 K. Cs in Ti₃SiC₂ is found to diffuse during post-irradiation annealing at 973 K, and noticeable Cs release from the sample is observed. This study may suggest caution in using Ti 3 SiC 2 as a fuel cladding material for advanced nuclear reactors operating at very high temperatures. Progress is reported in thermal conductivity modeling of SiC-based materials that is relevant to this research, as is progress in modeling the effects of CNTs on fracture strength of SiC-based materials.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Design and Thermal Analysis for Irradiation of Silicon Carbide Joint Specimens in the High Flux Isotope Reactor

This report provides a summary of the irradiation vehicle design and thermal analysis of SiC joint specimens planned for irradiation in the flux trap of the High Flux Isotope Reactor (HFIR). Two different capsule designs will be used to accommodate the two different specimen geometries: a small torsion joint specimen geometry to measure mechanical and thermal properties, and a tube and end plug joint representative cladding geometry to demonstrate strength and hermeticity retention. The capsule designs, with target temperatures of 350° and 750°C, will accommodate either sixteen torsion joint specimens or one tube end plug joint specimen. Three joint variations will be studied in each capsule design: a hybrid SiC (preceramic polymer with chemical vapor deposition (CVD) SiC), a transient eutectic phase (TEP) process, and an oxide process.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Synthesis and Characterization of Silicon Carbide Ceramic Composites with CeO 2 Powder

This study pioneers the fabrication and characterization of silicon carbide (SiC) containing cerium dioxide (CeO 2 ). CeO 2 powder was tested as a surrogate for actinide oxide waste forms such as uranium dioxide (UO 2 ) and plutonium dioxide (PuO 2 ). Several syntheses were evaluated with varying amounts of preceramic polymer (SMP-10 resin) and CeO 2 containing either SiC fiber, carbon fiber, or no fibers. Scanning electron microscopy (SEM) was used to characterize morphology and compositional differences, and energy-dispersive x-ray spectroscopy (EDS) was used to provide semiquantitative elemental analysis. In addition, each sample was characterized by density, powder x-ray diffraction (pXRD), and Raman spectroscopy. Samples containing nearly more than four times CeO 2 powder than SMP-10 resin by mass had the best properties. This research establishes a unique synthesis for SiC containing high concentrations of CeO 2 powder to illustrate how it may be managed as a potential waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1998

Suspension of SiC Powders in Allyhydridopolycarbosilane (AHPCS): Control of Rheology

Inert particulate fillers can be blended with preceramic polymers prior to infiltration of composite preforms to increase pyrolysis yield and decrease shrinkage, thus reducing the number of infiltration/ pyrolysis cycles required for densification. However, particulate filler loadings and concentration of added dispersants necessary to maintain low viscosity (< 0.50 N.s/sq m) slurries vary with the characteristics of the particular AHPCS polymer batch. These batch to batch variations occur with alterations in the synthesis process and method of allyl substitution, which in turn alter polymer structure and molecular weight distribution. A number of different polymer batches were characterized by NMR, GPC and thermal analysis, and the influence of polymer structure on rheology of filled systems determined. When the high molecular weight fraction increased to too great a level, suitably fluid slurries could no longer be attained.

Hurwitz, Frances I.↗