Search NASA⌕ Search

SEARCH · Search NASA

Results for “pressure gradient force”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaporation and propagation of liquid drop streams at vacuum pressures: Experiments and modeling

Evaporation of streams of liquid droplets in environments at vacuum pressures below the vapor pressure has not been widely studied. Here, experiments and simulations are reported that quantify the change in droplet diameter when a steady stream of ≈100 μm diameter drops is injected into a chamber initially evacuated to <10 –8 bar. In experiments, droplets fall through the center of a 0.8 m long liquid nitrogen cooled shroud, simulating infinity radiation and vapor mass flux boundary conditions. Furthermore, experimentally measured changes in drop diameters vary from ≈0 to 6 μm when the initial vapor pressure is increased from 10 –6 to 10 –3 bar by heating the liquid. Measured diameter changes are predicted by a model based on the Hertz-Knudsen equation. One uncertainty in the calculation is the “sticking coefficient” β. Assuming a constant β for all conditions studied here, predicted diameter changes best match measurements with β≈0.3. This value falls within the range of β reported in the literature for organic liquids. Finally, at the higher vapor pressure conditions considered here, the drop stream disperses transverse to the main flow direction. This spread is attributed to forces imparted by an absolute pressure gradient produced by the evaporating stream.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Driven resonant current amplification in self-organized plasma configurations with uniform λ and plasma pressure confinement

Driven resonant current amplification in uniform λ=$^{μoJ}_{B}$, self-organized plasma configurations with plasma pressure confinement is studied. This work extends previous analyses of force-free states (J ∥ B) to equilibria with plasma pressure gradients (∇P = J × B ≠ 0). An analytical treatment shows that in equilibria with uniform λ and a plasma pressure gradient that varies linearly with poloidal magnetic flux, driven resonances are either downshifted or upshifted from their force-free values. Additionally, a modification of off resonance current amplification is observed in pressure confining equilibria. Computational results add support to analytical predictions, and also include driven resonance behavior with equilibrium profiles not considered analytically. Furthermore, these results suggest not only persistence, but also modification of driven resonant current amplification in sustained spheromak configurations with plasma pressure confinement when compared to force-free states. By providing a basis for the existence of driven, high current amplification, pressure confining equilibria, this work provides insight into the accessibility of sustained spheromak states of most interest for potential fusion energy applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Pair plasma instability in homogeneous magnetic guide fields

Pair plasmas, collections of both matter and antimatter particles of equal mass, represent a paradigm for the study of basic plasma science, and many open questions exist regarding these unique systems. They are found in many astrophysical settings, such as gamma-ray bursts, and have recently also been produced in carefully designed laboratory experiments. A central research topic in plasma physics is instability; however, unlike their more common ion–electron siblings, pair plasmas are generally thought to be stable to cross field pressure gradients in homogeneous magnetic fields. It is shown here by means of kinetic full-f simulations that, when a pressure gradient is first established, the Gradient-driven Drift Coupling mode is destabilized and becomes turbulent. Force balance is eventually achieved by a combination of flattened pressure profiles due to turbulent transport and establishment of a magnetic field gradient, saturating the growth. During the unstable phase, key physics can be captured by a δf gyrokinetic description, where it is shown analytically and numerically that parallel particle motion results in a coupling of all electromagnetic field components. A fluid model derived therefrom accurately predicts linear eigenmodes and is used to resolve global profile effects. For laser-based electron–positron plasma experiments, prompt instability is predicted with growth times much shorter than plasma lifetimes. Similarly, growth rates are calculated for the planned APEX experiment as well as gamma-ray burst scenarios, suggesting that the instability may contribute to the early evolution of these systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Statistically Steady State Large-Eddy Simulations Forced by an Idealized GCM: 1. Forcing Framework and Simulation Characteristics

Using large-eddy simulations (LES) systematically has the potential to inform parameterizations of subgrid-scale (SGS) processes in general circulation models (GCMs), such as turbulence, convection, and clouds. Here we show how LES can be run to emulate grid columns of GCMs to generate a library of LES across a cross-section of dynamical regimes. The LES setup replicates the thermodynamic and water budgets in GCM grid columns. Resolved horizontal and vertical transports of heat and water and large-scale pressure gradients from the GCM are prescribed as forcing in the LES. The LES satisfies the same (slab-ocean) surface boundary conditions as the GCM, leaving the LES temperatures free to adjust. Radiative transfer is treated in a unied but highly idealized manner (a semi-gray atmosphere without cloud radiative effects) in both the GCM and LES. We show that the LES with these forcing and boundary conditions reaches statistically steady states without nudging to reference profiles. These steady states provide a training dataset for developing GCM parameterizations. The same LES setup also provides a good basis for studying the cloud response to global warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Flow Directions and Ages of Subsurface Water in a Salt Marsh System Constrained by Isotope Tracing

Salt marshes are dynamic hydrologic systems where terrestrial groundwater, terrestrial surface water, and seawater mix due to bi-directional flows and pressure gradients. Due to the counteracting terrestrial and marine forcings that control these environments, we do not comprehensively understand water fluxes in these complex coastal systems. To understand the water sources, flow directions, and velocities in salt marsh porewater, we employed a combination of geochemical tracers and analytical models across a hillslope-to-salt marsh continuum in a salt marsh experiencing daily inundation of estuarine surface water (SW) from tides and mixing of fresh seasonal groundwater. We used tritium ( 3 H) as a hydrologic tracer to assess porewater ages and stable water isotope ($\delta$ 2 H and $\delta$ 18 O) analyses to separate isotopically distinct estuarine and terrestrial groundwater across different depths and landscape positions in the study transect. We employed electrical conductivity to constrain the role of source mixing and evapotranspiration in salt marsh hydrology. Salinity and stable isotopes revealed that transpiration, rather than evaporation, increased subsurface water salinity to concentrations above estuarine SW during summer. Elevated salinity at depth indicated that salt marsh subsurface water is recharged during the dry growing season. Seasonal recharge patterns drive long-term deep subsurface water dynamics across the salt marsh, with 3 H ages of 3–7 years, and daily tidal cycles drive short-term shallow porewater dynamics with 3 H ages of 0 ± 3.6 years. Furthermore, our conceptual understanding of the spatiotemporal changes in SW-subsurface water interactions at the terrestrial-marine interface quantifies the hydrological constraints we are missing to improve our understanding of biogeochemical cycles within the salt marsh.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Stable water isotopes and tritium data from porewater at Elkhorn Slough

Salt marshes are dynamic hydrologic systems where terrestrial groundwater, terrestrial surface water, and seawater mix due to bi-directional flows and pressure gradients. Due to the counteracting terrestrial and marine forcings that control these environments, we do not comprehensively understand water fluxes in these complex coastal systems. To understand the water sources, flow directions, and velocities in salt marsh porewater, we collected geochemical tracers across a hillslope-to-salt marsh continuum in a salt marsh experiencing daily inundation of estuarine surface water (SW) from tides and mixing of fresh seasonal groundwater. The experimental transect is located at the Elkhorn Slough National Estuarine Research Reserve.Here we present a data table (.csv) with the results of electrical conductivity, stable water isotopes, and tritium in porewater across several elevations in the hillslope-to-salt marsh continuum (information in the data set). We analyzed the stable water isotope samples by cavity ring-down spectroscopy in a Picarro L2130-i at the University of California Santa Cruz (accuracy of 0.025‰ and 0.1‰ for δ18O and δ2H, respectively). We measured the electric conductivity of the samples with an Orion Star™ A329 multiparameter meter (0.5% accuracy, Thermo Fisher Scientific, Massachusetts, USA). We analyzed 3H samples at Lawrence Livermore National Laboratory by helium-3 accumulation (Clarke et al., 1976; Surano et al., 1992).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Gap Flows Along the Columbia River Observed During the WFIP2 Field Campaign

Data collected in the Columbia River Gorge and Basin Area during the second Wind Forecasting Improvement Project (WFIP2) was used to study gap flow events in the region. In particular, the relationship between 200 m zonal wind speed and the zonal mesoscale pressure gradient at Troutdale (West of the gorge), Wasco (east of the gorge), and Boardman (farther east of the gorge) sites was examined. An objective criterion was used to identify 169 (Troutdale), 161 (Wasco), and 113 (Boardman) gap flow days that had weak synoptic forcing. The 200 m zonal wind speed exhibited a linear relationship with the zonal pressure gradient at Wasco during both easterly and westerly gap flow days at daily timescales. Such a relationship was only observed during easterly gap flow days at Troutdale and was not observed at Boardman. The zonal wind speed exhibited a diurnal cycle at Wasco and Boardman, with greater changes in the nighttime winds than the daytime winds due to changes in pressure gradient. The root mean square differences (RMSDs) between the observed pressure gradient at Wasco and that simulated by the High Resolution Rapid Refresh (HRRR) model in 3 km (HRRR-3km) and 750 m (HRRR-750m) horizontal resolution were 3.14 hPa and 0.57 hPa, respectively. However, the RMSDs for the 200 m zonal wind speed were 1.40 m s -1 for HRRR-3km and 1.20 m s -1 for HRRR- 750m. Improvement in simulating the zonal pressure gradient accompanied by negligible changes in simulating zonal wind speed due to higher horizontal resolution points to a complex interplay between different components of the model physics when simulating the meteorology. The HRRR-750m resolution model accurately mimicked the observed covariability (phase diagram) between the zonal pressure gradient and the 200 m zonal wind speed during the nighttime, but not during the daytime, suggesting model errors might be related to the representation of boundary layer processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Linking Synoptic Patterns to Cloud Properties and Local Circulations Over Southeastern Texas

This report classifies meteorological regimes in the southeastern Texas region to identify environmental conditions that favor sea-breeze induced convection. The classification is accomplished using a Self-Organizing Map (SOM) approach. We applied SOM to 10 years of 700-hPa geopotential height anomalies during the summer months from reanalysis data to distinguish three dominant synoptic regimes, with a continuum of transitional states between those. The primary regimes include: (a) a pre-trough regime associated with a synoptic trough, (b) a post-trough regime with upper-level northerly flow, and (c) an anticyclonic regime within the westward extent of the Bermuda High. We project the data from the Geostationary Operational Environmental Satellite and the Next Generation Weather Radar system onto each SOM node to investigate the characteristics of cloud and precipitation properties in different regimes. When southeastern Texas is positioned to the southwest quadrant of a maritime high pressure system, an increased cloud frequency is observed over the region during the afternoon hours due to significant moisture advection. A confluence of synoptic southerly flow and sea-breeze circulation commonly occurs in this regime. When a high pressure system is over southeastern Texas, the area is dominated by large-scale subsidence with weak pressure gradients and moderate precipitable water vapor. This weak synoptic forcing is favorable for the formation of a sea-breeze circulation. This is confirmed by an enhanced onshore flow and a decreased temperature at the surface in the early afternoon, as well as a sharp increase in radar echo top height.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Unsupervised Learning Based Interaction Force Model for Nonspherical Particles in Incompressible Flows

This project provides a neural network-based interaction force model for gas-solid flows from low to intermediate Reynolds numbers and concentration, which can be linked to MFiX-DEM. We have constructed a database of the interaction force between the irregular-shaped particles using a spherical harmonic method and the fluid phase based on the particle-resolved direct numerical simulation (PR-DNS) with immersed boundary-based gas kinetic scheme. Unsupervised learning method, i.e., variational auto-encoder (VAE) has been applied to extract the primitive shape factors determining the drag force, lifting forces, and torque. The interaction force model has been trained and validated with a simple but effective multi-layer feed-forward neural network: multi-layer perceptron (MLP), which will be concatenated after the encoder of the previously trained VAE for geometry feature extraction for single, irregular particles. We have trained transpose convolutional neural networks with the PR-DNS data to predict the velocity and pressure gradient of the single particle systems and utilized them to calculate drag force of multi-particle systems. This model can provide high computational efficiency because it does not require collecting multiparticle system data from PR-DNS.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Electrically Driven Ion Separations in Permeable Membranes

Ion separations are critical for producing materials such as Li and rare-earth element salts that are essential for applications including energy storage and production. This research aimed to develop and understand separations of singly and multiply charged ions as well as separations among different singly charged ions such as Li + and Na + . Thin layers of polyelectrolytes on membranes allow passage of singly charged ions at rates 1000 times faster than those for multiply charged ions. This allows purification of mixtures with equal concentrations of Li + and Mg 2+ to create a permeate solution with >99% Li + . Such membranes may also effectively isolate rare earth elements. To separate Li + and K + , this work developed opposing flow and current in membranes. The current overcomes the flow of K + to allow Li + to selectively pass through the membrane, leading to Li + /K + selectivities around 70. All of the research employs modelling to better understand the mechanism of these separations, which includes transport driven by gradients in electrical potential, concentration, and pressure. The interplay of these driving forces can create highly selective separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

When does turbulence spreading matter?

Few, if any, of the many papers on turbulence spreading address the key question of how turbulence spreading actually affects the profile structure. In this work, we are using a reduced model to answer that question. Turbulence spreading is most relevant near regions where the profiles support a strong intensity gradient ∇I. One such case is at the edge of an L mode ischarge, near a source of turbulence [i.e., either a localized source of edge turbulence or an influx of turbulence from the scrape-off layer (SOL)]. Another is in “No Man’s Land” (NML), which connects the pedestal to the stiff core in H mode. In the case of L mode, without an edge intensity source, the turbulence intensity profile is nearly flat and spreading has a weak effect. An edge localized source increases the edge ∇I, which then drives inward spreading. Invasion of turbulence from the SOL to the edge softens the edge pressure gradient. In H mode, the strong shear suppression of pedestal turbulence necessarily forces a sharp ∇I in NML. This sharp∇I drives a significant flux of turbulence from the core to the pedestal, where it is ultimately dissipated by shearing. Counter-intuitively, the results indicate that spreading actually increases the pedestal height and width and hence the energy content in H mode. This suggests that models of the pedestal structure should include NML turbulence spreading effects. The relation of avalanches to spreading is studied. Spreading weakly affects the avalanche distribution, but the spatiotemporal correlation of intensity increases with spreading.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Spatially varying colloidal phase behavior on multi-dimensional energy landscapes

A method is reported to determine equilibrium concentration profiles and local phase behavior for colloids on multi-dimensional energy landscapes. A general expression is derived based on local particle concentration and osmotic pressure differences that are balanced by forces on colloids due to energy landscape gradients. This analysis is applied to colloidal particles in high frequency AC electric fields within octupolar electrodes, where the energy landscape can be shaped in two dimensions. These results are also directly applicable to any particles having induced dipoles in spatially non-uniform electromagnetic fields. Predictions based on modelling colloids with an effective hard disk equation of state indicate inhomogeneous solid and fluid states coexisting on different shaped energy landscapes including multiple minima. Model predictions show excellent agreement with time-averaged Brownian Dynamic simulations at equilibrium. Findings demonstrate a general approach to understand colloidal phase behavior on energy landscapes due to external fields, which could enable control of colloidal microstructure on morphing energy landscapes and the inverse design of fields to assemble hierarchically structured colloidal materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

How do intermittency and simultaneous processes obfuscate the Arctic influence on midlatitude winter extreme weather events?

Abstract Pronounced changes in the Arctic environment add a new potential driver of anomalous weather patterns in midlatitudes that affect billions of people. Recent studies of these Arctic/midlatitude weather linkages, however, state inconsistent conclusions. A source of uncertainty arises from the chaotic nature of the atmosphere. Thermodynamic forcing by a rapidly warming Arctic contributes to weather events through changing surface heat fluxes and large-scale temperature and pressure gradients. But internal shifts in atmospheric dynamics—the variability of the location, strength, and character of the jet stream, blocking, and stratospheric polar vortex (SPV)—obscure the direct causes and effects. It is important to understand these associated processes to differentiate Arctic-forced variability from natural variability. For example in early winter, reduced Barents/Kara Seas sea-ice coverage may reinforce existing atmospheric teleconnections between the North Atlantic/Arctic and central Asia, and affect downstream weather in East Asia. Reduced sea ice in the Chukchi Sea can amplify atmospheric ridging of high pressure near Alaska, influencing downstream weather across North America. In late winter southward displacement of the SPV, coupled to the troposphere, leads to weather extremes in Eurasia and North America. Combined tropical and sea ice conditions can modulate the variability of the SPV. Observational evidence for Arctic/midlatitude weather linkages continues to accumulate, along with understanding of connections with pre-existing climate states. Relative to natural atmospheric variability, sea-ice loss alone has played a secondary role in Arctic/midlatitude weather linkages; the full influence of Arctic amplification remains uncertain.

Environmental Sciences & Ecology↗
DOE OSTI2024

Simulation of triggering and evolution of ELM by pellet injection in EAST under BOUT++ framework

A BOUT ++ three-field magnetohydrodynamic model is employed to study the triggering and evolution of edge localized mode (ELM) by Li pellets injected along the outer mid-plane in the EAST configuration. The linear simulation shows that compared with a large deposition on the pedestal top (scenario I), a smaller deposition within the steep-gradient pedestal region (scenario II) can stimulate much larger linear growth rates of all-n peeling-ballooning modes (PBMs). The nonlinear simulation shows that there exists a pellet size threshold for ELM triggering for two deposition locations; the threshold for scenario I predicted in the present study matches the EAST observation well. Comparison of the two scenarios reveals that a smaller deposition is sufficient to trigger an ELM in a much shorter time in scenario II, whose ELM size is comparable to that in scenario I. This conclusion confirms previous DIII-D and ASDEX-Upgrade observations, suggesting that the steep-gradient pedestal region is a favorable deposition location for ELM triggering with minimum pellet size. Simulation analyses also find that the positive radial gradient of the hump-like pressure profile in the outer mid-plane induced by the pellet deposition plays a different role in the two scenarios. In scenario I, the force resulting from the gradient hinders the outflow of core plasmas and in return, the perturbation is suppressed from spreading inwards after ELM crashes. In scenario II, with a sizable deposition, the gradient results in another competitive perturbation growth region during the linear phase, thus dispersing the free energy and reducing the efficiency of destabilizing PBMs by pellet injection. The suppressing effect of saturated zonal flow on other modes, the short ELM fast crash phase, and the restricting transport effect of the positive radial pressure gradient work together to constrain the pedestal energy loss, especially when the pellet deposition amount is high.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Electro-chemo-mechanically Driven Ni Exsolution from (Pr,Ce,Ni)O 2−δ : Controlled Nucleation Density and Enhanced Electrode Kinetics

In situ exsolution of metal nanoparticles is a promising strategy to prepare electrocatalysts with enhanced activity and resistance to agglomeration for efficient chemical transformations and energy conversion. Achieving a high nucleation density of nanoparticles under mild conditions and understanding how to tailor the process is important for performance of these electrodes in electrochemical cells. In this work, we demonstrate facile exsolution of Ni nanoparticles using fluorite-structured (Pr,Ce)O 2−δ as the support oxide, driven by electrochemical potential and aided by the metastability of Ni in the solid solution (elastic driving force). We prepare single-phase oriented thin films of (Pr,Ce,Ni)O 2−δ (NPCO) on (Zr,Y)O 2−δ (YSZ) substrates by pulsed laser deposition. With the aid of a high-throughput electrochemical cell that provides a lateral gradient in Nernst voltage, we apply in situ near-ambient pressure synchrotron X-ray photoelectron spectroscopy and ex situ atomic force microscopy to investigate the impact of electrochemical potential on Ni nucleation density. We find that metallic Ni can be successfully exsolved at 550 °C upon cathodic biasing in 20 mTorr O 2 , and its nucleation density increases with increasing electrochemical driving force/decreasing oxygen chemical potential. We further evaluate the electrochemical performance under highly reducing (fuel electrode) conditions by electrochemical impedance spectroscopy. With the exsolved Ni nanoparticles, the surface exchange coefficient of the NPCO is found to be ∼4× higher than for PCO without exsolution. This work confirms mixed conducting fluorites as beneficial host lattices for facile transition-metal exsolution and suggests the possibility for constructing an all ceria-based electrochemical cell with PCO serving as both the cathode and the anode.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Preliminary Cryogenic Cold Test Results of the First 9-Cell LSF Shape Cavity

Following successful prototyping and testing of single- & 5-cell LSF shape cavities *, **, the first 9-cell LSF shape cavity LSF9-1 was successfully constructed using an innovative process at JLab with the in-house facilities. The cavity was then shipped to KEK for post-fabrication mechanical adjustment and ILC TDR style treatment and surface processing. Cold testing was carried out at the JLab VTA facility, instrumented with a suite of Kyoto instruments. Favorable values for the bath pressure detuning sensitivity and Lorentz force detuning coefficient were experimentally measured, validating the design improvement in cell stiffeners. Pass-band measurements indicate 4 out of 9 cells reaching gradient capability of > 45 MV/m, including 2 cells reaching 51 MV/m. Cornell OST detectors identified the cell and location responsible for the current hard quench limit. Multipacting-like barriers observed in end cells are investigated both analytically and numerically. The cavity was shipped to FNAL and received a light EP at the joint ANL/FNAL facility for further cold testing at Jlab. Two new 9-cell LSF cavities are being constructed including one made of large-grain niobium material.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

On the relationship between the multi-region relaxed variational principle and resistive inner-layer theory

We show that the variational energy principle of the multi-region relaxed magnetohydrodynamic (MRxMHD) model can be used to predict finite-pressure linear tearing instabilities. In this model, the plasma volume is sliced into sub-volumes separated by 'ideal interfaces', and in each volume the magnetic field relaxes to a Taylor state, where the pressure gradient $\nabla p = 0$. The MRxMHD model is implemented in the Stepped-Pressure Equilibrium Code (SPEC) so that the equilibrium solution in each region is computed while preserving the force balance across the interfaces. As SPEC computes the Hessian matrix (a discretized stability matrix), the stability of an MRxMHD equilibrium can also be computed with SPEC. In this article, using SPEC, we investigate the effect of local pressure gradients and the $\nabla p = 0$ in the vicinity of the resonant surface of a tearing mode. For low-beta plasma, we have been able to illustrate a relationship between the resistive singular-layer theory (Coppi et al 1966 Nucl. Fusion6 101; Glasser et al 1975 Phys. Fluids18 875–88) and the MRxMHD model. Within the singular layer, the volume-averaged magnetic helicity and the flux-averaged toroidal flux are shown to be the invariants for the linear tearing modes in SPEC simulations. Our technique to compute MRxMHD stability is first tested numerically in a cylindrical tokamak and its application in toroidal geometry is demonstrated. We demonstrate an agreement between the stability boundary obtained with SPEC simulation and the resistive inner-layer theories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Sockeye Code Validation Against UNIST Heat Pipe - Poster - Internship 2025

Sockeye is an engineering level code being developed under the MOOSE framework for modeling heat pipes. A heat pipe is a sealed tube with a wick structure filled with a working fluid that transfers heat efficiently and passively via phase change of the working fluid. Heat applied to the evaporator end creates a pressure gradient which causes vapor to migrate to the condenser end where the vapor deposits its energy and condenses. Capillary force generated by the wick structure then draws the liquid back to the evaporator. A validation study was performed to compare the Sockeye code against data produced at the Ulsan National Institute of Standards and Technology for a slightly overfilled sodium heat pipe. The heat pipe was operated under natural convection cooling and a decreasing inactive length was observed. The experiment was modeled in Sockeye using the condenser pool model, the front non-condensable gas (NCG) model, and the mixture NCG model separately to reproduce the inactive length phenomenon. Also, a new capability was implemented in MOOSE to allow for conjugate heat transfer from the condenser based on the Churchill-Chu correlation for natural convection. The condenser pool model showed an increasing inactive length, demonstrating that the behavior was likely not caused by a pool of excess liquid. The front NCG model was able to show good agreement with the experiment, but it suffered convergence issues at the front. Finally, the mixture NCG model gave good results when the axial mesh was sufficiently refined. This work culminated in additions to the Sockeye documentation and a contribution to a journal article that will be published later. This poster is a summary of my work which I can take back to my university for presentation.

42 - ENGINEERING↗