Search NASA⌕ Search

SEARCH · Search NASA

Results for “project improvements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Improving Climate Projections by Understanding How Cloud Phase affects Radiation

Whether a cloud is predominantly water or ice strongly influences interactions between clouds and radiation coming down from the Sun or up from the Earth. Being able to simulate cloud phase transitions accurately in climate models based on observational data sets is critical in order to improve confidence in climate projections, because this uncertainty contributes greatly to the overall uncertainty associated with cloud-climate feedbacks. Ultimately, it translates into uncertainties in Earth's sensitivity to higher CO2 levels. While a lot of effort has recently been made toward constraining cloud phase in climate models, more remains to be done to document the radiative properties of clouds according to their phase. Here we discuss the added value of a new satellite data set that advances the field by providing estimates of the cloud radiative effect as a function of cloud phase and the implications for climate projections.

radiation↗
NASA NTRS1997

Gold Coating

Epner Technology Inc. responded to a need from Goddard Space Flight Center for the ultimate in electroplated reflectivity needed for the Mars Global Surveyor Mars Orbiter Laser Altimeter (MOLA). Made of beryllium, the MOLA mirror was coated by Epner Technology Laser Gold process, specially improved for the project. Improved Laser Gold- coated reflectors have found use in an epitaxial reactor built for a large semiconductor manufacturer as well as the waveguide in Braun-Thermoscan tympanic thermometer and lasing cavities in various surgical instruments.

Source record↗
NASA NTRS1995

Estimates of volumetric bone density from projectional measurements improve the discriminatory capability of dual X-ray absorptiometry

To determine whether estimates of volumetric bone density from projectional scans of the lumbar spine have weaker associations with height and weight and stronger associations with prevalent vertebral fractures than standard projectional bone mineral density (BMD) and bone mineral content (BMC), we obtained posteroanterior (PA) dual X-ray absorptiometry (DXA), lateral supine DXA (Hologic QDR 2000), and quantitative computed tomography (QCT, GE 9800 scanner) in 260 postmenopausal women enrolled in two trials of treatment for osteoporosis. In 223 women, all vertebral levels, i.e., L2-L4 in the DXA scan and L1-L3 in the QCT scan, could be evaluated. Fifty-five women were diagnosed as having at least one mild fracture (age 67.9 +/- 6.5 years) and 168 women did not have any fractures (age 62.3 +/- 6.9 years). We derived three estimates of "volumetric bone density" from PA DXA (BMAD, BMAD*, and BMD*) and three from paired PA and lateral DXA (WA BMD, WA BMDHol, and eVBMD). While PA BMC and PA BMD were significantly correlated with height (r = 0.49 and r = 0.28) or weight (r = 0.38 and r = 0.37), QCT and the volumetric bone density estimates from paired PA and lateral scans were not (r = -0.083 to r = 0.050). BMAD, BMAD*, and BMD* correlated with weight but not height. The associations with vertebral fracture were stronger for QCT (odds ratio [QR] = 3.17; 95% confidence interval [CI] = 1.90-5.27), eVBMD (OR = 2.87; CI 1.80-4.57), WA BMDHol (OR = 2.86; CI 1.80-4.55) and WA-BMD (OR = 2.77; CI 1.75-4.39) than for BMAD*/BMD* (OR = 2.03; CI 1.32-3.12), BMAD (OR = 1.68; CI 1.14-2.48), lateral BMD (OR = 1.88; CI 1.28-2.77), standard PA BMD (OR = 1.47; CI 1.02-2.13) or PA BMC (OR = 1.22; CI 0.86-1.74). The areas under the receiver operating characteristic (ROC) curves for QCT and all estimates of volumetric BMD were significantly higher compared with standard PA BMD and PA BMC. We conclude that, like QCT, estimates of volumetric bone density from paired PA and lateral scans are unaffected by height and weight and are more strongly associated with vertebral fracture than standard PA BMD or BMC, or estimates of volumetric density that are solely based on PA DXA scans.

Non-NASA Center↗
NASA NTRS2021

Climate Impacts on Global Agriculture Emerge Earlier in New Generation of Climate and Crop Models

Potential climate-related impacts on future crop yield are a major societal concern. Previous projections of the Agricultural Model Intercomparison and Improvement Project’s Global Gridded Crop Model Intercomparison based on the Coupled Model Intercomparison Project Phase 5 identified substantial climate impacts on all major crops, but associated uncertainties were substantial. Here we report new twenty-first-century projections using ensembles of latest-generation crop and climate models. Results suggest markedly more pessimistic yield responses for maize, soybean and rice compared to the original ensemble. Mean end-of-century maize productivity is shifted from +5% to −6% (SSP126) and from +1% to −24% (SSP585)—explained by warmer climate projections and improved crop model sensitivities. In contrast, wheat shows stronger gains (+9% shifted to +18%, SSP585), linked to higher CO 2 concentrations and expanded high-latitude gains. The ‘emergence’ of climate impacts consistently occurs earlier in the new projections—before 2040 for several main producing regions. While future yield estimates remain uncertain, these results suggest that major breadbasket regions will face distinct anthropogenic climatic risks sooner than previously anticipated.

crop model↗
NASA NTRS1981

Wildlife habitat evaluation demonstration project

To support the deer range improvement project in Michigan, the capability of LANDSAT data in assessing deer habitat in terms of areas and mixes of species and age classes of vegetation is being examined to determine whether such data could substitute for traditional cover type information sources. A second goal of the demonstration project is to determine whether LANDSAT data can be used to supplement and improve the information normally used for making deer habitat management decisions, either by providing vegetative cover for private land or by providing information about the interspersion and juxtaposition of valuable vegetative cover types. The procedure to be used for evaluating in LANDSAT data of the Lake County test site is described.

Burgoyne, G. E., Jr.↗
NASA NTRSDate not supplied

Identifying Chemical and Optical Smoke Signatures in Suborbital Observations to Improve Model Projections

Biomass Burning (BB) fires are expected to occur more frequently in the future due to climate change, the build‐up of fuels due to fire suppression, and the expansion of the wildland‐urban interface [Schoennagel et al., 2017; Shivdenko & Schepaschenko, 2013; Stevens et al., 2014; Turner et al., 2019; Yue et al., 2015; Tilman et al., 2001]. Accurate knowledge of the abundance, distribution, and optical properties of absorbing aerosols such as BB smoke is essential to understanding regional and global aerosol radiative effects [Boucher et al., 2013]. It is recognized that differing fuel types (e.g., rice straw, ponderosa pine), combustion modes (i.e., flaming, smoldering or both) and temperature/ moisture content produce smoke with differing optical characteristics (e.g., aerosol light scattering and absorption) and component mixing ratios [e.g., BC, OC and inorganic species such as sulfate, potassium, chloride; Streets et al. 2003; Reid et al., 2005a, b; Janhäll et al., 2010; Sayer et al., 2014]. However, climate models often ascribe a fixed set of emission factors [i.e., amount of particulate for a given species released in the atmosphere per unit dry fuel burned; Darmenov and Dasilva, 2013] and optical properties [Hess et al., 1998] to all BB aerosol plumes, inherently limiting accurate representation of the global and regional heterogeneity of BB. The overarching goal of the proposed work is to improve the microphysical and optical representation of different types of Biomass Burning in Chemistry Transport Models. Our strategy is to capitalize on multiple airborne campaigns (e.g., ARCTAS, SEAC4RS, ORACLES, FIREX-AQ), which sampled different types of BB plumes at different aging stages. Models, when improved and combined with satellite, airborne, and ground observations will help address many aerosol science objectives from the NASA Decadal survey [National Academies of Sciences, Engineering, and Medicine. 2018].

Meloe Shenandoah F Kacenelenbogen↗
NASA NTRS1980

Improved components for engine fuel savings

NASA programs for developing fuel saving technology include the Engine Component Improvement Project for short term improvements in existing air engines. The Performance Improvement section is to define component technologies for improving fuel efficiency for CF6, JT9D and JT8D turbofan engines. Sixteen concepts were developed and nine were tested while four are already in use by airlines. If all sixteen concepts are successfully introduced the gain will be fuel savings of more than 6 billion gallons over the lifetime of the engines. The improvements include modifications in fans, mounts, exhaust nozzles, turbine clearance and turbine blades.

Antl, R. J.↗
NASA NTRS2001

Improving Space Project Cost Estimating with Engineering Management Variables

Current space project cost models attempt to predict space flight project cost via regression equations, which relate the cost of projects to technical performance metrics (e.g. weight, thrust, power, pointing accuracy, etc.). This paper examines the introduction of engineering management parameters to the set of explanatory variables. A number of specific engineering management variables are considered and exploratory regression analysis is performed to determine if there is statistical evidence for cost effects apart from technical aspects of the projects. It is concluded that there are other non-technical effects at work and that further research is warranted to determine if it can be shown that these cost effects are definitely related to engineering management.

Hamaker, Joseph W.↗
NASA NTRS2014

Propellant Handler's Ensemble (PHE) Aka Self-Contained Atmospheric Protective Ensemble (SCAPE), Ventilator Improvement Study Project

The overall objective for this project is to evaluate two candidate alternatives for the existing Propellant Handler's Ensemble (PHE) escape ventilator. The new candidate ventilators use newer technology with similar quantities of air at approximately half the weight of the current ventilator. Ventilators are typically used to ingress/egress a hazardous work area when hard line air is provided at the work area but the hose is not long enough to get the operator to and from the staging area to the work area. The intent of this test is to verify that the new ventilators perform as well as or better than the current ventilators in maintaining proper oxygen (O2) and carbon dioxide (CO2) levels in the PHE during a typical use for the rated time period (~10 minutes). We will evaluate two new units comparing them to the existing unit. Subjects will wear the Category I version of the Propellant Handler's Ensemble with the rear suit pouch snapped.

PHE↗
NASA NTRS1979

Demonstration of aircraft wing/store flutter suppression systems

A wind tunnel test program was conducted to demonstrate the active wing/store flutter suppression systems on a lightweight fighter aircraft. The program, completed in mid-1978, included the design, analysis, fabrication, and testing of a scale model. The tests were conducted at the NASA Langley 16-ft Transonic Dynamics Tunnel. Three store configurations were selected for testing. Two of these configurations were deliberately designed to exhibit low flutter speeds with rapid reductions in damping at the incipient flutter condition. After initial tunnel entries, which showed the need for certain improvements in the model and the control system design, substantial increases in the flutter speeds were achieved using both leading- and trailing-edge control surfaces, separately. For the most critical configuration, a demonstrated improvement of 18% and a projected improvement of 29% in the dynamic pressure were achieved.

Hwang, C.↗
NASA NTRS2011

Project Management Meets Change Management - A Success Story. Focus Area: Tech Perspectives TI012SN

Utilizing the concepts and terminology from Project Management, the process of planning and executing a Change Management (CM) Infrastructure improvement project is described. The primary audience for this presentation includes both experienced and relatively new CM administrators and their managers. It also includes anyone with an interest in the application of project management knowledge to CM administration. There are several benefits: the complexity of the CM tool technology is more manageable, CM administrators get to use project management knowledge to complete a project (not "firefighting"), improve relations with your customers (that means developers and managers), and get the opportunity to do it again.

Hall, Wayne↗
NASA NTRS2011

Comparison of Direct Solar Energy to Resistance Heating for Carbothermal Reduction of Regolith

A comparison of two methods of delivering thermal energy to regolith for the carbo thermal reduction process has been performed. The comparison concludes that electrical resistance heating is superior to direct solar energy via solar concentrators for the following reasons: (1) the resistance heating method can process approximately 12 times as much regolith using the same amount of thermal energy as the direct solar energy method because of superior thermal insulation; (2) the resistance heating method is more adaptable to nearer-term robotic exploration precursor missions because it does not require a solar concentrator system; (3) crucible-based methods are more easily adapted to separation of iron metal and glass by-products than direct solar energy because the melt can be poured directly after processing instead of being remelted; and (4) even with projected improvements in the mass of solar concentrators, projected photovoltaic system masses are expected to be even lower.

Muscatello, Anthony C.↗
NASA NTRS2011

Portfolio Management

Enterprise Business Information Services Division (EBIS) supports the Laboratory and its functions through the implementation and support of business information systems on behalf of its business community. EBIS Five Strategic Focus Areas: (1) Improve project estimating, planning and delivery capability (2) Improve maintainability and sustainability of EBIS Application Portfolio (3) Leap forward in IT Leadership (4) Comprehensive Talent Management (5) Continuous IT Security Program. Portfolio Management is a strategy in which software applications are managed as assets

Information Technology Applications↗
NASA NTRSDate not supplied

Building a Framework to Model Food Security Pressures and Shocks in a Changing World

• An Intersection of Challenges for Food Security • The Agricultural Model Intercomparison and Improvement Project (AgMIP) • Establishing and evaluating agricultural models • Responding to the transient signal of climate change • Understanding food systems and identifying potential for unexpected behaviors • Opportunities For a More Resilient Future

Food Security↗
NASA NTRS1988

The TAME Project: Towards improvement-oriented software environments

Experience from a dozen years of analyzing software engineering processes and products is summarized as a set of software engineering and measurement principles that argue for software engineering process models that integrate sound planning and analysis into the construction process. In the TAME (Tailoring A Measurement Environment) project at the University of Maryland, such an improvement-oriented software engineering process model was developed that uses the goal/question/metric paradigm to integrate the constructive and analytic aspects of software development. The model provides a mechanism for formalizing the characterization and planning tasks, controlling and improving projects based on quantitative analysis, learning in a deeper and more systematic way about the software process and product, and feeding the appropriate experience back into the current and future projects. The TAME system is an instantiation of the TAME software engineering process model as an ISEE (integrated software engineering environment). The first in a series of TAME system prototypes has been developed. An assessment of experience with this first limited prototype is presented including a reassessment of its initial architecture.

Basili, Victor R.↗
NASA NTRSDate not supplied

AgMIP Local, National and Global Assessments of Food System Challenges in A Changing Climate

Food systems connect a diverse network of stakeholders around the world, with complex dynamics governing production, processing, transportation, trade and consumption of food products. Extreme conditions can disrupt multiple components of the food system, with systemic connections providing structure that can both buffer and exacerbate risks. Climate change is shifting current practices in agricultural production and the broader food system, encouraging shifts toward more diverse value chains capable of drawing from multiple food producing regions to reduce the chance that an entire value chain be subject to simultaneous impacts. The IPCC Working Group I report assessed that heat waves, fires, floods and severe storms are becoming more pronounced and widespread with each degree of global warming, increasing food system risk. Food system disruptions can also come from outside the climate system, including from viral outbreaks, geopolitical conflict and socioeconomic changes. This presentation will highlight how the Agricultural Model Intercomparison and Improvement Project (AgMIP) develops modeling approaches that connect climate, biophysical and socioeconomic models in order to capture complex responses of the food system and potential interventions by diverse stakeholders in the public and private sectors. Models are applied on a range of scales that match decision contexts. These include households in specific agricultural production regions (e.g., within a country), national-level policymakers considering policies, sustainability and development priorities for a country’s agricultural sector, and global food market models that balance production and consumption around the world with competition for land, water, energy and sustainability priorities. Models are capable of capturing many important responses, but further development is needed to represent key systemic risks and the possibility for additional interventions beyond the farm gate. Improved food system models will provide important insights into our society’s ability to cope with climate change, as well as our ability to identify agricultural adaptation and mitigation opportunities to reduce overall risk.

Food systems↗
NASA NTRS2021

Climate Change Impacts and Adaptation for Dryland Farming Systems in Zimbabwe: A Stakeholder-Driven Integrated Multi-Model Assessment

Decision makers need accurate information to address climate variability and change and accelerate transformation to sustainability. A stakeholder-driven, science-based multi-model approach has been developed and used by the Agricultural Model Intercomparison and Improvement Project (AgMIP) to generate actionable information for adaptation planning processes. For a range of mid-century climate projections—likely to be hotter, drier, and more variable—contrasting future socio-economic scenarios (Representative Agricultural Pathways, RAPs) were co-developed with stakeholders to portray a sustainable development scenario and a rapid economic growth pathway. The unique characteristic of this application is the integration of a multi-modeling approach with stakeholder engagement to co-develop scenarios and adaptation strategies. Distribution of outcomes were simulated with climate, crop, livestock, and economic impact assessment models for smallholder crop livestock farmers in a typical dryland agro-ecological zone in Zimbabwe, characterized by low and erratic rainfall and nutrient depleted soils. Results showed that in Nkayi District, Western Zimbabwe, climate change would threaten most of the farms, and, in particular, those with large cattle herds due to feed shortages. Adaptation strategies that showed the most promise included diversification using legume production, soil fertility improvement, and investment in conducive market environments. The switch to more legumes in the farming systems reduced the vulnerability of the very poor as well as the more resourced farmers. Overall, the sustainable development scenario consistently addressed institutional failures and motivated productivity-enhancing, environmentally sound technologies and inclusive development approaches. This yielded more favorable outcomes than investment in quick economic wins from commercializing agriculture.

Climate change adaptation↗