SEARCH · Search NASA

Results for “pulsed laser melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Modeling laser interactions with aluminum and tantalum targets using a hybrid atomistic-continuum model

A hybrid atomistic-continuum method can model the microstructure evolution of metals subjected to laser irradiation. This method combines classical molecular dynamics (MD) simulations with the two-temperature model (TTM) to account for the laser energy absorption and heat diffusion behavior. Accurate prediction of the temperature evolution in the combined MD-TTM method requires reliable accuracy in electron heat capacity, electron thermal conductivity, and electron–phonon coupling factor across the temperatures generated. This study uses the electronic density of states (DOS) obtained from first-principle calculations. The calculated electron temperature-dependent parameters are used in MD-TTM simulations to study the laser metal interactions in FCC and BCC metals and the phenomenon of laser shock loading and melting. This study uses FCC Al and BCC Ta as model systems to demonstrate this capability. When subjected to short pulsed laser shocks, the dynamic failure behavior predicted using temperature-dependent parameters is compared with the experimentally reported single-crystal and nanocrystalline Al and Ta systems. The MD-TTM simulations also investigate laser ablation and melting behavior of Ta to compare with the ablation threshold reported experimentally. In conclusion, this manuscript demonstrates that integrating the temperature-dependent parameters into MD-TTM simulations leads to the accurate modeling of the laser–metal interaction and allows the prediction of the kinetics of the solid–liquid interface.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Time-Resolved X-ray Emission Spectroscopy and Resonant Inelastic X-ray Scattering Spectroscopy of Laser Irradiated Carbon

The existence of liquid carbon as an intermediate phase preceding the formation of novel carbon materials has been a point of contention for several decades. Experimental observation of such a liquid state requires nonthermal melting of solid carbon materials at various laser fluences and pulse properties. Reflectivity experiments performed in the mid-1980s reached opposing conclusions regarding the metallic or insulating properties of the purported liquid state. Time-resolved X-ray absorption studies showed shortening of C–C bonds and increasing diffraction densities, thought to evidence a liquid or glassy carbon state, respectively. Nevertheless, none of these experiments provided information on the electronic structure of the proposed liquid state. Herein, we report the results of time-resolved resonant inelastic X-ray scattering (RIXS) and time-resolved X-ray emission spectroscopy (XES) studies on amorphous carbon (a-C) and ultrananocrystalline diamond (UNCD) as a function of delay time between the irradiating pulse and X-ray probe. For both a-C and UNCD, we attribute decreases in RIXS or XES signals to transition blocking, relaxation, and finally, ablation. Increased signal at 20 ps following the irradiation of the UNCD is attributed to the probable formation of nanoscale structures in the ablation plume. Further, differences in the amount of signal observed between a-C and UNCD are explained by the difference in sample thickness and, specifically, incomplete melting of the UNCD film. Comparisons to spectral simulations based on MD trajectories at extreme conditions indicate that the carbon state in our experiments is crystalline. Normal mode analysis confirmed that symmetrical bending or stretching of the C–C bonds in the diamond lattice results in XES spectra with small intensity differences. Overall, we observed no evidence of melting to a liquid state, as determined by the lack of changes in the spectral properties for up to 100 ps delays following the melting pulses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Investigating off-Hugoniot states using multi-layer ring-up targets

Abstract Laser compression has long been used as a method to study solids at high pressure. This is commonly achieved by sandwiching a sample between two diamond anvils and using a ramped laser pulse to slowly compress the sample, while keeping it cool enough to stay below the melt curve. We demonstrate a different approach, using a multilayer ‘ring-up’ target whereby laser-ablation pressure compresses Pb up to 150 GPa while keeping it solid, over two times as high in pressure than where it would shock melt on the Hugoniot. We find that the efficiency of this approach compares favourably with the commonly used diamond sandwich technique and could be important for new facilities located at XFELs and synchrotrons which often have higher repetition rate, lower energy lasers which limits the achievable pressures that can be reached.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Ultrafast laser-induced spin–lattice dynamics in the van der Waals antiferromagnet CoPS 3

CoPS 3 stands out in the family of the van der Waals antiferromagnets XPS 3 (X = Mn, Ni, Fe, and Co) due to the unquenched orbital momentum of the magnetic Co 2+ ions, which is known to facilitate the coupling of spins to both electromagnetic waves and lattice vibrations. Here, using a time-resolved magneto-optical pump–probe technique, we experimentally study the ultrafast laser-induced dynamics of mutually correlated spins and lattice. It is shown that a femtosecond laser pulse acts as an ultrafast heater and, thus, results in the melting of the antiferromagnetic order. At the same time, the resonant pumping of the 4 T 1g → 4 T 2g electronic transition in Co 2+ ions effectively changes their orbital momentum, giving rise to a mechanical force that moves the ions in the direction parallel to the orientation of their spins, thus generating a coherent B g phonon mode at the frequency of about 4.7 THz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Development of a Laser Ultrasonics-based Approach for Rapid Screening of High Entropy Alloys

This project utilized a laser ultrasonic technique to systematically study temperature-induced evolution of material properties in a set of interrelated binary alloys and a high entropy alloy (HEA) fabricated using arc-melting and spark plasma sintering processes. This technique involved the use of a nanosecond duration, high-intensity pulsed laser to thermo-elastically generate ultrasonic waves that propagate in the bulk of the metal alloy. Sub-nanometer-scale displacements associated with the propagating bulk ultrasonic waves were detected along the epicenter on the opposite surface of the sample using a 1 GHz bandwidth photorefractive interferometer. Phase transformations and microstructural changes were inferred from the temperature-dependent trends in the bulk acoustic velocities and features in the ultrasonic epicentral waveforms measured in the binary alloys. These inferences were then correlated with electron/optical microscopy observations and predictions using calculations of phase diagrams (CALPHAD). The results showed that the laser-generated ultrasonic pulses were strongly influenced by changes in material microstructure and could accurately track thermally driven phase transformations and detect the presence of microscale heterogeneities (grain boundaries, dendritic structures, etc.) in the set of binary alloy samples. The measurement approach was then applied to a quinary HEA sample for estimating phase transition temperature and determining microstructural heterogeneity. The rapid, non-contact and non-destructive ultrasonic testing approach demonstrated here is amenable to high throughput combinatorial investigations that can be applied to graded composition HEAs produced using advanced manufacturing methods. When paired with atomistic simulations and CALPHAD modeling, this approach can overcome the bottlenecks faced by current material characterization methods in efficiently screening the vast discovery space of HEAs that spans over a hundred million unique quinary alloy compositions.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Microstructural modification of additively manufactured metals by electropulsing

Additive manufacturing (AM) promises rapid development cycles and fabrication of ready-to-use, geometrically-complex parts. The metallic parts produced by AM often contain highly non-equilibrium microstructures, e.g. chemical microsegregation and residual dislocation networks. While such microstructures can enhance some material properties, they are often undesirable. Many AM parts are thus heat-treated after fabrication, a process that significantly slows production. This study investigated if electropulsing, the process of sending high-current-density electrical pulses through a metallic part, could be used to modify the microstructures of AM 316 L stainless steel (SS) and AlSi10Mg parts fabricated by selective laser melting (SLM) more rapidly than thermal annealing. Electropulsing has shown promise as a rapid postprocessing method for materials fabricated using conventional methods, e.g. casting and rolling, but has never been applied to AM materials. For both the materials used in this study, as-fabricated SLM parts contained significant chemical heterogeneity, either chemical microsegregation (316 L SS) or a cellular interdendritic phase (AlSi10Mg). In both cases, annealing times on the order of hours at high homologous temperatures are necessary for homogenization. Using electropulsing, chemical microsegregation was eliminated in 316 L SS samples after 10, 16 ms electrical pulses. In AlSi10Mg parts, electropulsing produced spheroidized Si-rich particles after as few as 15, 16 ms electrical pulses with a corresponding increase in ductility. Finally, this study demonstrated that electropulsing can be used to modify the microstructures of AM metals.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Transient Mesoscopic Immiscibility, Viscosity Anomaly, and High Internal Pressure at the Semiconductor–Metal Transition in Liquid Ga 2 Te 3

Gallium tellurides appear to be promising phase-change materials (PCMs) of the next generation for brain-inspired computing and reconfigurable optical metasurfaces. They are different from the benchmark PCMs because of sp 3 gallium hybridization in both cubic Ga 2 Te 3 and amorphous pulsed laser deposition (PLD) films. Liquid Ga 2 Te 3 also shows a viscosity η(T) anomaly just above melting when η(T) first increases and only then starts decreasing. We used high-energy X-ray diffraction to observe a transient mesoscopic immiscibility that suggested dense metallic liquid droplets in a semiconducting melt. The η(T) shape was consistent with this finding. A vanishing first sharp diffraction peak that also shifts to a higher Q indicates a high internal pressure in the metallic melt, which produces a remarkable asymmetry of the Ga–Te nearest neighbor distances and is reminiscent of high-pressure rhombohedral Ga 2 Te 3 . Finally, the observed phenomena provide a realistic scenario for a fast, multilevel SET–RESET response, which also unravels similar trends in the purported density-driven liquid polyamorphism of water, phosphorus, sulfur, and other materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Real-time laser ultrasonic monitoring of laser-induced thermal processes

Abstract Intra- and inter-layer integrity of components fabricated with advanced manufacturing techniques, such as laser powder bed fusion, is dependent upon rapid heating, melting, and solidification processes. There is a need for new techniques to provide in situ feedback of these processes. Here a laser-based ultrasonic technique to probe thermal effects induced by a high-power continuous wave laser in titanium samples is described. Numerical simulations were performed to show that, for a spatially uniform heating beam, laser-induced surface acoustic waves are strongly influenced by surface heating conditions, are dispersive in the case of rapid heating, and that an abrupt velocity reduction happens upon the onset of surface melting. Furthermore, laser-based ultrasound experimental results which monitor the transient change of surface wave travel time associated with high power laser surface heating are provided. A pulsed laser is used to generate high frequency surface acoustic waves that propagate through the laser-heated region and are detected using a photorefractive crystal-based interferometer. Qualitative agreement is observed between theory and experiment with both showing a rapid reduction in the surface wave velocity at the onset of illumination and further decrease in surface wave velocity associated with melting. It is demonstrated that changes in the surface wave velocity can be used to track local heating and detect the onset of surface melting in real time.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Variable Laser Ignition Pathways in Al/Pt Reactive Multilayers across 10 Decades of Pulse Duration

Pulsed laser irradiation is used to investigate the local initiation of rapid, self-propagating formation reactions in Al/Pt multilayers. The single pulse direct laser ignition of these 1.6 μm thick freestanding foils was characterized over 10 decades of pulse duration (10 ms to 150 fs). Finite element, reactive heat transport modeling of the near-threshold conditions has identified three distinct ignition pathways. For milli- to microsecond pulses, ignition occurs following sufficient absorption of laser energy to enable diffusion of Al and Pt between layers such that the heat released from the corresponding exothermic reaction overcomes conductive losses outside the laser-irradiated zone. When pulse duration is decreased into the nanosecond regime, heat is concentrated near the surface such that the Al locally melts, and a portion of the top-most bilayers react initially. The favorable kinetics and additional heat enable ignition. Further reducing pulse duration to hundreds of femtoseconds leads to a third ignition pathway. In this work, while much of the energy from these pulses is lost to ablation, the remaining heat beneath the crater can be sufficiently concentrated to drive a transverse self-propagating reaction, wherein the heat released from mixing at each interface occurs under kinetic conditions capable of igniting the subsequent layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

FEMTOSECOND LASER DRILLING OF SILICON NITRIDE

Ceramics are employed in various engineering applications including electronics, semiconductors, automotive and aerospace industry, among others. Ceramics are desirable materials due to their high hardness, thermal resistance, chemical, thermal, and mechanical properties. A drawback of engineering ceramics is the manufacturing process. Ceramics are hard and brittle and conventional drilling or cutting methods can damage the material. These challenges in manufacturing have limited the application of ceramics in certain engineering applications. The non-contact machining of ceramics through ultrashort pulsed laser drilling offers a possible solution to the manufacturing issues. The advantage of laser drilling is the ability to machine hard and brittle materials. A laser, pulsed in the time regime of femtoseconds (fs), drills/machines sharp and well-defined holes and cuts. Additionally, the short pulse width results in limited melting, cracking, or heat transfer to the surrounding material, as well as no residual stresses. This non-contact process can greatly aid in the machining of hard materials. This study focuses on drilling into silicon nitride to produce zero-taper through holes. With this, other thicknesses can be explored, to achieve zero-taper holes.

Femtosecond laser ablation, Ceramics, Silicon Nitr↗

DOE OSTI2025

The influence of laser power modulation on melt pool dynamics in laser powder bed fusion

While the majority of laser powder bed fusion (LPBF) metal additive manufacturing uses a continuous wave (CW) laser heat source, some commercial applications of LPBF additive manufacturing instead involve the modulation of the laser power on tens-of-microsecond timescales as an adjustable process variable. This article reports the use of in situ, high speed x-ray and optical imaging to probe melt pool fluid flow, defect formation, and nearby powder motion during LPBF with both modulated and CW laser heat sources. We observe melt pool dynamics unique to modulated laser melting even at very high duty cycles that are related to fluctuations in vapor depression depth, complex pore formation mechanisms, and changes to denudation physics when compared to CW melting. These behaviors are present in Ti–6Al–4V, 316L stainless steel, and AL1100 alloys but vary slightly as a function of material, indicating a substantial dependence on the viscosity and surface tension of the liquid metal. While high duty cycles produce weld tracks of comparable quality to CW melting, lower duty cycles introduce substantial defect concentrations. At intermediate duty cycles, careful control of modulation parameters can repeatably and precisely yield one pore per laser pulse, suggesting a method for intentionally inserting engineered porosity at specific sites during an LPBF build.

3D printing↗

DOE OSTI2022

Epitaxially crystallized polyethylene exhibiting near‐equilibrium melting temperatures*

Abstract The morphology and orientation of polymer crystals are important factors which determine the performance of thin‐film, polymer‐based technologies such as organic electronic devices and gas separation membranes. Here, we utilize polymer‐substrate epitaxy to achieve a highly oriented crystalline morphology during thin‐film processing. To accomplish this, we employ matrix‐assisted pulsed laser evaporation (MAPLE), a slow physical vapor deposition process, to deposit linear polyethylene epitaxially atop a graphene substrate. Via MAPLE, we demonstrate the ability to achieve a film morphology comprised of well‐aligned, edge‐on crystalline lamellae. Furthermore, we show that MAPLE can be exploited to grow crystalline lamellae composed entirely of extended polymer chains which exhibit a near‐equilibrium melting temperature. Our study demonstrates that MAPLE, as a bottom‐up approach, can deposit polymer thin films with improved control over crystalline morphology.

Wang, Yucheng↗

DOE OSTI2021

In situ characterization of laser-generated melt pools using synchronized ultrasound and high-speed X-ray imaging

Metal additive manufacturing is a fabrication method that forms a part by fusing layers of powder to one another. An energy source, such as a laser, is commonly used to heat the metal powder sufficiently to cause a molten pool to form, which is known as the melt pool. The melt pool can exist in the conduction or the keyhole mode where the material begins to rapidly evaporate. The interaction between the laser and the material is physically complex and difficult to predict or measure. Here, high-speed X-ray imaging was combined with immersion ultrasound to obtain synchronized measurements of stationary laser-generated melt pools. Furthermore, two-dimensional and three-dimensional finite-element simulations were conducted to help explain the ultrasonic response in the experiments. In particular, the time-of-flight and amplitude in pulse-echo configuration were observed to have a linear relationship to the depth of the melt pool. These results are promising for the use of ultrasound to characterize the melt pool behavior and for finite-element simulations to aid in interpretation.

42 ENGINEERING↗

DOE OSTI2021

Shock-ramp analysis test problem

Quasi-isentropic (ramp) compression is now a well-established experimental method and so are the analysis techniques to give Lagrangian sound speed, pressure, and density along the sample material's isentrope. A shock followed by ramp compression is a natural extension to investigate, for example, shock melt and refreeze on compression, or isentropes of states off the Hugoniot or principal isentrope. In practice, graded-density impactors produce initial shocks, compression by shaped laser pulses may be unable to produce a smooth pressure increase from zero, and incidental perturbations on the drive pulse may also give rise to shocks, so robust shock-ramp analysis methods will be needed. Appropriate analysis methods are needed for shock-ramp experiments, based on those for quasi-isentropic compression, and these require validation. This paper describes three different analyses of a shock-ramp test problem, including an assessment of their estimated errors. The methods tested were based on hydrodynamic characteristics or integration backward in space. All methods gave the known Lagrangian sound speed to within ~1%, and pressure and volume to within less than 2% and 1%, demonstrating that the analysis methods of isentropic compression experiments can be confidently extended to the analysis of shock and ramp compression.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Optically and thermally driven huge lattice orbital and spin angular momenta from spinning fullerenes

Lattice vibration in solids may carry angular momentum. But unlike the intrinsic spin of electrons, the lattice vibration is rarely rotational. To induce angular momentum, one needs to find a material that can accommodate a twisted normal mode, two orthogonal modes, or excitation of magnons. If excitation is too strong, one may exceed the Lindemann limit, so the material melts. Therefore these methods are not ideal. Here, we theoretically propose a route to phonon angular momentum in a molecular crystal C 60 . We find that a single laser pulse is able to inject a significant amount of angular momentum to C 60 , and the momentum transfer is helicity dependent. Changing from right-circularly polarized light to left-circularly polarized light switches the direction of phonon angular momentum. On the ultrafast timescale, the orbital angular momentum change closely resembles the displacive excitation of coherent phonons, with a cosine-function dependence on time, different from the spin counterpart. Atomic displacements, even under strong laser excitation, remain far below the Lindemann criterion. Under thermal excitation, spinning C 60 even at room temperature generates a huge angular momentum close to several hundred hÂ¯. Our finding opens the door to a large group of fullerenes, from C 60 , C 70 to their endohedral derivatives, where angular momentum can be generated through light or temperature. Furthermore, this paves the way to the phononic control electronic spin and harvesting thermal energy through phonon angular momentum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Inducing thermodynamically blocked atomic ordering via strongly driven nonequilibrium kinetics

Ultrafast light-matter interactions enable inducing exotic material phases by promoting access to kinetic processes blocked in equilibrium. Despite potential opportunities, actively using nonequilibrium kinetics for material discovery is limited by the poor understanding on intermediate states of driven systems. Here, using single-pulse time-resolved imaging with x-ray free-electron lasers, we found intermediate states of photoexcited bismuth nanoparticles that showed kinetically reversed surface ordering during ultrafast melting. This entropy-lowering reaction was further investigated by molecular dynamics simulations to reveal that observed kinetics were thermodynamically buried in equilibrium, which emphasized the critical role of electron-mediated ultrafast free-energy modification in inducing exotic material phases. This study demonstrated that ultrafast photoexcitations of electrons provide an efficient strategy to induce hidden material phases by overcoming thermodynamic barriers via nonequilibrium reaction pathways.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Performance Validation of Pulsed Thermal Imaging System for In-Service Applications

42 ENGINEERING↗

DOE OSTI2021

Performance of Compact Pulsed Thermal Imaging System for In-Service Applications. Pulsed thermal tomography nondestructive examination of additively manufactured reactor materials and components

Additive manufacturing (AM) is an emerging method for cost-efficient fabrication of complex topology nuclear reactor parts from high-strength corrosion resistance alloys, such as stainless steel and Inconel. AM of metallic structures for nuclear energy applications is currently based on laser powder bed fusion (LPBF) process, which has the capability of melting metallic powder and net shaping the structures with relatively high precision. Some of the challenges with using LPBF method for nuclear manufacturing include the possibility of introducing pores into metallic structures. Integrity of AM structures needs to be evaluated nondestructively because material flaws could lead to premature failures due to creep in high temperature nuclear reactor environment. Currently, there exist limited capabilities to evaluate actual AM structures nondestructively. Pulsed Thermography (PT) imaging provides a capability for non-destructive evaluation (NDE) of sub-surface defects in arbitrary size structures. The PT method is based on recording material surface temperature transients with infrared (IR) camera following thermal pulse delivered on material surface with flash light. The PT method has advantages for NDE of actual AM structures because the method involves one-sided non-contact measurements and fast processing of large sample areas captured in one image. The data cube of PT measurements consists of surface temperature taken at sequential time intervals T(x,y,t). Material defects can be detected either by analyzing the thermograms T(x,y,t) data cube, or by using thermal tomography (TT) algorithm to obtain 3D spatial reconstruction of thermal effusivity e(x,y,z). To reduce the cost and enable in-service NDE in spatially constrained environment, it is highly desirable to develop PT with compact and inexpensive IR camera. Following initial qualification of an AM component for deployment in a nuclear reactor, a compact PT system can also be used for in-service nondestructive evaluation (NDE) applications. However, data cube obtained with PT based on compact IR camera suffers from strong thermal noises and loss of features due to relatively low sampling rate. In this report we describe two unsupervised machine learning (ML) algorithms for enhancement of PT images obtained with compact IR camera. In one approach, we introduce Sparse Coding Discrete Cosine Transform (SC/DCT) algorithm to remove additive white Gaussian noise (AWGN) from spatial thermal effusivity reconstructions. In another approach we introduce a Spatial Temporal Denoised Thermal Source Separation (STDTSS) ML algorithm to process thermograms. The STDTSS algorithm consists of spatial and temporal denoising using Gaussian and Savitzky–Golay filtering, followed by the matrix decomposition using Principal Component Analysis (PCA), and Independent Component Analysis (ICA) to automatically detect flaws. In the work described in this report, we constructed a compact PT system using a relatively small and low-cost FLIR A65 camera, consisting on uncooled microbolometer detector. Performance of SC/DCT algorithm was demonstrated on enhancing TT images of Inconel 718 AM plate. Performance of the STDTSS methods was investigated using thermography data obtained from imaging stainless steel 316L specimens produced with LPBF method with imprinted calibrated porosity defects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗