Search NASA⌕ Search

SEARCH · Search NASA

Results for “ratcheting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Hubble Space Telescope EVA Power Ratchet Tool redesign

The Power Ratchet Tool (PRT) is a self contained, power-driven, 3/8 inch drive ratchet wrench which will be used by astronauts during Extravehicular Activities (EVA). This battery-powered tool is controlled by a dedicated electonic controller. The PRT was flown during the Hubble Space Telescope (HST) Deployment Mission STS-31 to deploy the solar arrays if the automatic mechanisms failed. The PRT is currently intended for use during the first HST Servicing Mission STS-61 as a general purpose power tool. The PRT consists of three major components; the wrench, the controller, and the battery module. Fourteen discrete combinations of torque, turns, and speed may be programmed into the controller before the EVA. The crewmember selects the desired parameter profile by a switch mounted on the controller. The tool may also be used in the manual mode as a non-powered ratchet wrench. The power is provided by a silver-zinc battery module, which fits into the controller and is replaceable during an EVA. The original PRT did not meet the design specification of torque output and hours of operation. To increase efficiency and reliability the PRT underwent a redesign effort. The majority of this effort focused on the wrench. The original PRT drive train consisted of a low torque, high speed brushless DC motor, a face gear set, and a planocentric gear assembly. The total gear reduction was 300:1. The new PRT wrench consists of a low speed, high torque brushless DC motor, two planetary gear sets and a bevel gear set. The total gear reduction is now 75:1. A spline clutch has also been added to disengage the drive train in the manual mode. The design changes to the controller will consist of only those modifications necessary to accomodate the redesigned wrench. The battery design will be unaffected.

Richards, Paul W.↗
NASA NTRS1997

A Theory for the Roll-Ratchet Phenomenon in High Performance Aircraft

Roll-ratchet refers to a high frequency oscillation which can occur in pilot-in-the-loop control of roll attitude in high performance aircraft. The frequencies of oscillation are typically well beyond those associated with the more familiar pilot-induced oscillation. A structural model of the human pilot which has been employed to provide a unified theory for aircraft handling qualities and pilot-induced oscillations is employed here to provide a theory for the existence of roll-ratchet. It is hypothesized and demonstrated using the structural model that the pilot's inappropriate use of vestibular acceleration feedback can cause this phenomenon, a possibility which has been discussed previously by other researchers. The possible influence of biodynamic feedback on roll ratchet is also discussed.

Hess, Ronald A.↗
DOE OSTI2022

Coefficient of Thermal Expansion Evolution during Ratchet Growth of PBX 9502 and Neat TATB

The Plastic-Bonded Explosive (PBX) 9502 is comprised of the insensitive high explosive TATB (triamino trinitrobenzine) crystals coated in FK-800 polymer binder and isostatically pressed. The TATB crystals have a graphitic, plate-like morphology and possess significant thermal and mechanical anisotropy. Compactions of neat TATB or TATB-based composites (like PBX 9502) have been shown to have TATB crystals that are oriented during the pressing process giving rise to TATB texture and resulting in micro- and macro-scale anisotropy of the compaction. Thermal cycling of the compactions results in irreversible volume expansion (or ratchet growth) likely by creating stress points on the microscale. However, the actual mechanism behind this expansion is not fully understood. Previous characterization of the ratchet growth phenomenon has focused on the magnitude of the irreversible strain as measured before and after a thermal cycle. In the work presented here, we analyze the evolving thermal expansion behavior during the ascending and descending temperature ramps and compare differences observed due to the presence/absence of binder in the compaction.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

The path to 1.5 °C requires ratcheting of climate pledges

Using model simulations of high-ambition emissions pathways, we show that ratcheting—or increasing—climate ambition through 2030 will be crucial to limiting global peak temperature changes this century. Although updated pledges offered in advance of the Glasgow climate conference in 2021 meaningfully strengthened global ambition in 2030 compared to the 2015 Paris pledges, here, our study underscores the importance of countries ratcheting their 2030 pledges further to reduce the magnitude of temperature overshoot and consequently reduce the risks of irreversible and adverse consequences to natural and human systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Dynamics of Magnus-dominated particle clusters, collisions, pinning, and ratchets

Motivated by the recent work in skyrmions and active chiral matter systems, we examine pairs and small clusters of repulsively interacting point particles in the limit where the dynamics is dominated by the Magnus force. We find that particles with the same Magnus force can form stable pairs, triples, and higher ordered clusters or exhibit chaotic motion. For mixtures of particles with opposite Magnus force, particle pairs can combine to form translating dipoles. Under an applied drive, particles with the same Magnus force translate; however, particles with different or opposite Magnus force exhibit a drive-dependent decoupling transition. When the particles interact with a repulsive obstacle, they can form localized orbits with depinning or unwinding transitions under an applied drive. We examine the interaction of these particles with clusters or lines of obstacles and find that the particles can become trapped in orbits that encircle multiple obstacles. Under an ac drive, we observe a series of ratchet effects, including ratchet reversals, for particles interacting with a line of obstacles due to the formation of commensurate orbits. Lastly, in assemblies of particles with mixed Magnus forces of the same sign, we find that the particles with the largest Magnus force become localized in the center of the cluster, while for mixtures with opposite Magnus forces, the motion is dominated by transient local pairs or clusters, where the translating pairs can be regarded as a form of active matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1991

High temperature viscoplastic ratchetting - Material response or modeling artifact

Some of the basic issues of ratchetting behavior that are being addressed by the viscoplastic modeling community are discussed. Some of the shortcomings of existing viscoplastic models are examined in the light of the difficulty involved in using established viscoplastic modeling techniques to predict ratchetting accurately.

Freed, Alan D.↗
DOE OSTI2023

Multiscale numerical investigation of ratchet growth damage effects in PBX 9502

This paper presents results of numerical experiments conducted on the high explosive PBX 9502 to investigate how recently observed grain-scale damage mechanisms of ratchet growth affect uniaxial compression measurements. Simulations are multiscale in the sense of directly resolving grains, pores, cracks, and grain-interfaces based upon scanning electron microscope (SEM) images of damaged and undamaged samples. The combined finite-discrete element method (FDEM) is utilized to resolve both grain-scale microfracture and elastoplastic deformation of solid grains. Pristine (undamaged) and damaged microstructures are compared in simulation of unconfined compression tests of the same material from the literature. Here, the simulation results show the observed microscale mechanisms of damage, specifically microfracture predominantly around and sometimes through grains and crack-associated pore growth, can well-explain the effective degradation of strength and stiffness observed in the laboratory measurements.

36 MATERIALS SCIENCE↗
NASA NTRS2024

GVIPS Prediction of Cyclic Ratchetting Behavior and Cycles With Interrupted Relaxation Periods of TIMETAL 21S at 650 oC

The predictive performance of a multimechanism GVIPS model with saturating hardening function is assessed against a set of high temperature cyclic experiments under both strain-control and stress-control at varying rates of loading as well as several complex interrupted cyclic responses. The material specimens were composed of the titanium alloy, TIMETAL 21S, and tested at 650oC, see Lissenden et al., 2007. The model did a very good job of predicting the variety of tests, particularly given the fact that only monotonic loading tests (tensile, creep, relaxation) and a single fully reversed cycle was used for characterization. It was particularly interesting that the model was capable of reasonably capturing the rate of accumulated strain during ratchetting under tensile mean stress. Given complex interrupted cyclic response, the model was able to both qualitatively and even quantitatively predict reasonably well both the cyclic and associated relaxation periods (in all quadrants of the stress-strain space) thus confirming the validity of the chosen functional forms for both hardening and thermal recovery. The quantitative inaccuracy is associated with the fact that the material specimens tested by Lissenden et al., 2007 was significantly “softer” than those tested by Castelli in Saleeb et al., 1994 which were used for characterization of the GVIPS model parameters.

Viscoplaticity↗
NASA NTRS2026

GVIPS Prediction of Cyclic Ratchetting Behavior and Cycles with Interrupted Relaxation Periods of TIMETAL 21S at 650 °C

The predictive performance of a multimechanism GVIPS model with saturating hardening function is assessed against a set of high temperature cyclic experiments under both strain-control and stress-control at varying rates of loading as well as several complex interrupted cyclic responses. The material specimens were composed of the titanium alloy, TIMETAL 21S, and tested at 650 °C, see Lissenden et al., 2007. The model did a very good job of predicting the variety of tests, particularly given the fact that only monotonic loading tests (tensile, creep, relaxation) and a single fully reversed cycle was used for characterization. It was particularly interesting that the model was capable of reasonably capturing the rate of accumulated strain during ratchetting under tensile mean stress. Given complex interrupted cyclic response, the model was able to both qualitatively and even quantitatively predict reasonably well both the cyclic and associated relaxation periods (in all quadrants of the stress-strain space) thus confirming the validity of the chosen functional forms for both hardening and thermal recovery. The quantitative inaccuracy is associated with the fact that the material specimens tested by Lissenden et al., 2007 was significantly “softer” than those tested by Castelli in Saleeb et al., 1994 which were used for characterization of the GVIPS model parameters.

Viscoplaticity↗
DOE OSTI2023

Taking stock of nationally determined contributions: Continued ratcheting of ambition is critical to limit global warming to 1.5°C

We will discuss that as countries take stock of progress made in accomplishing their climate goals ahead of COP28 this year, it is increasingly apparent that countries must ratchet ambition in policy areas such as non-CO 2 gases and carbon dioxide removal, while halting deforestation to lead the globe on a path consistent with the goals of the Paris Agreement.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Quantum Ratcheted Photophysics in Energy Transport

In this paper, we explore the scope of vibrations as quantum ratchets that serve as nonthermal routes to achieving population transport in systems where excitation transport between molecules is otherwise energetically unfavorable. In addition to their role as channels of transport, we investigate the effect of resonance of the vibrations, which are described by Huang-Rhys mixing, with excitonic energy gaps, which leads to strongly mixed vibronic excitons. Finally, we explore the interplay of resonance and Huang-Rhys mixing with electronic coupling between the molecules, in the presence of a dissipative bath, in optimizing transport in such systems. Furthermore, we find that while resonance is desirable, a moderate electronic coupling has a stronger positive effect in contrast to a large electronic coupling, which results in delocalized excitations across molecules and hampers unidirectional transport. We also report a special resonance regime that is able to circumvent the transport problems arising from large electronic couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tunable multistate field-free switching and ratchet effect by spin-orbit torque in canted ferrimagnetic alloy

Spin-orbit torque is not only a useful probe to study manipulation of magnetic textures and magnetic states at the nanoscale but also it carries great potential for next-generation computing applications. Here we report the observation of rich spin-orbit torque switching phenomena such as field-free switching, multistate switching, memristor behavior and ratchet effect in a single shot, co-sputtered, rare earth-transition metal Gd x Co 100-x . Notably such effects have only been observed in antiferromagnet/ferromagnet bi-layer systems previously. We show that these effects can be traced to a large anistropic canting, that can be engineered into the Gd x Co 100-x system. Further, we show that the magnitude of these switching phenomena can be tuned by the canting angle and the in-plane external field. The complex spin-orbit torque switching observed in canted Gd x Co 100-x not only provides a platform for spintronics but also serves as a model system to study the underlying physics of complex magnetic textures and interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

TATB ratchet growth and hydrostatically-confined PBX 9502

The explosive TATB (1,3,5-triamino-2,4,6-trinitirobenzene) is formulated with various polymeric binders to create plastic-bonded explosives like PBX 9502 (95 wt% TATB and 5 wt% Kel-F binder). TATB crystals are graphitic and plate-like in nature and single crystals exhibit anisotropic thermal expansion where the direction normal to the platelet surface grows 10-20 times more than the in-plane platelet direction. Compactions of TATB, with and without binder, exhibit irreversible volume expansion, also known as ratchet growth, when thermal cycled to hot or cold temperatures. Specifically, when TATB-based compactions return to ambient after a temperature excursion away from room temperature, the volume of the specimen is slightly larger. Repeated thermal cycles can reduce the density by 1 to 2%. Axial confinement on a cylindrical specimen has previously been shown by us to suppress growth in the confining direction but then increase growth in the unconfined directions (likely due to creep effects). In the work presented here, PBX 9502 specimens were placed in cup assemblies where they were embedded in Sylgard (an incompressible silicon resin) to provide hydrostatic confinement when the assemblies were placed under different axial loads. The loaded cup assemblies were thermally cycled 10 times to hot and cold temperatures. Finally, results show that increasing the hydrostatic confining pressure causes a decrease in the PBX 9502 volume expansion that occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1978

Compact ratchet wrench

Round ratchet wrench handle that fits into palm can be inserted into most areas that are inaccessible to wrenches with conventional handles.

Stringer, E. J.↗
NASA NTRS1982

Fabrication of Essex EVA ratchet wrenches

The extravehicular activity (EVA) ratchet wrench was developed. Shortly after Space Telescope (ST) maintenance simulations began, the need for a specialized maintenance tool arose. With inputs of tool requirements and design recommendations, several development model wrenches were tested in conjunction with ST neutral buoyancy simulations. The wrench design was modified and refined.

Vanvalkenburgh, C. N.↗
NASA NTRS1993

Establishing a relationship between maximum torque production of isolated joints to simulate EVA ratchet push-pull maneuver: A case study

As manned exploration of space continues, analytical evaluation of human strength characteristics is critical. These extraterrestrial environments will spawn issues of human performance which will impact the designs of tools, work spaces, and space vehicles. Computer modeling is an effective method of correlating human biomechanical and anthropometric data with models of space structures and human work spaces. The aim of this study is to provide biomechanical data from isolated joints to be utilized in a computer modeling system for calculating torque resulting from any upper extremity motions: in this study, the ratchet wrench push-pull operation (a typical extravehicular activity task). Established here are mathematical relationships used to calculate maximum torque production of isolated upper extremity joints. These relationships are a function of joint angle and joint velocity.

Pandya, Abhilash↗
DOE OSTI2020

Flashing ratchets

Provided herein are flashing ratchets that produce transport based on the oscillating application of regularly-spaced, asymmetric potentials. In particular, devices are provided that transport electrons without the requirement of an overall source-drain bias favoring electron transport.

42 ENGINEERING↗