Search NASA⌕ Search

SEARCH · Search NASA

Results for “rate constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Inefficient intramolecular vibrational energy redistribution for the H + HO2 reaction and negative internal energy dependence for its rate constant

Quasiclassical trajectories (QCT) and newly constructed global potential energy surfaces are used to compute thermal and nonthermal rate constants for the H + HO 2 reaction. The thermal QCTs rate constants are up to 50% smaller than transition state theory (TST) rate constants based on the same level of electronic structure theory. This reduction is demonstrated to result from inefficient intramolecular vibrational energy redistribution (IVR) in the transient H 2 O 2 well, with a significant fraction of trajectories that reach the H 2 O 2 well promptly dissociating back to reactants instead of via the heavily statistically favored 2OH channel. The nonstatistical reduction factor, κ IVR , that quantifies this effect is shown to increase in importance with temperature, with κ IVR = 0.81 at 300 K and 0.47 at 2500 K. Finally, we show that inefficient IVR causes H + HO 2 rate constants mediated by H 2 O 2 to depend inversely on the initial vibrational excitation of HO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Rate constant for the reaction SO + BrO yields SO2 + Br

The rate of the radical-radical reaction SO + BrO yields SO2 + Br has been determined at 298 K in a discharge flow system near 1 torr pressure with detection of SO and BrO via collision-free sampling mass spectrometry. The rate constant was determined using two different methods: measuring the decay of SO radicals in the presence of an excess of BrO and measuring the decay of BrO radicals in excess SO. The results from the two methods are in reasonable agreement and the simple mean of the two values gives the recommended rate constant at 298 K, k = (5.7 + or - 2.0) x 10 to the -11th cu cm/s. This represents the first determination of this rate constant and it is consistent with a previously derived lower limit based on SO2 formation. Comparison is made with other radical-radical reactions involving SO or BrO. The reaction SO + BrO yields SO2 + Br is of interest for models of the upper atmosphere of the earth and provides a potential coupling between atmospheric sulfur and bromine chemistry.

Brunning, J.↗
NASA NTRS1978

Rate constant for the reaction of atomic chlorine with methane

The rate constant and temperature dependence of the Cl + CH4 reaction have been investigated by the techniques of competitive chlorination of CH4/C2H6 mixtures and by discharge-flow/mass spectroscopy. The objectives were to determine an accurate value for the rate constant for use in stratospheric modeling, and to clarify discrepancies in results previously obtained by different techniques. The results deduced from the competitive chlorination study are in good agreement with the absolute values measured by the mass spectrometric method, and at temperatures above 300 K are in good agreement with measurements by other techniques based on resonance fluorescence detection of atomic chlorine. However, in the 220-300 K region, the competitive experiments indicate lower rate constants than those obtained by resonance fluorescence methods, and do not reproduce the curved Arrhenius plots seen in some of those studies.

Lin, C. L.↗
NASA NTRS1982

The temperature dependence of the rate constant for the reaction of hydroxyl radicals with nitric acid

The rate constant for the reaction of hydroxyl radicals with nitric acid in the 225-443 K temperature range has been measured by means of the flash photolysis resonance fluorescence technique. Above 300 K, the rate constant levels off in a way that can only be explained by the occurrence of two reaction channels, of which one, operative at low temperatures, proceeds through the formation of an adduct intermediate. The implications of these rate constant values for stratospheric reaction constants is discussed.

Kurylo, M. J.↗
DOE OSTI2020

Pilgrim : A thermal rate constant calculator and a chemical kinetics simulator

Pilgrim is a program written in Python and designed to use direct dynamics in the calculation of thermal rate constants of chemical reactions by the variational transition state theory (VTST), based on electronic structure calculations for the potential energy surface. Pilgrim can also simulate reaction mechanisms using kinetic Monte Carlo (KMC). For reaction processes with many elementary steps, the rate constant of each of these steps can be calculated by means of conventional transition state theory (TST) or by using VTST. In the current version, Pilgrim can evaluate thermal rates using the canonical version of reaction-path VTST, which requires the calculation of the minimum energy path (MEP) associated with each elementary step or transition structure. Multi-dimensional quantum effects can be incorporated through the small-curvature tunneling (SCT) approximation. These methodologies are available both for reactions involving a single structure of the reactants and the transition state and also for reactions involving flexible molecules with multiple conformations of the reactant and/or of the transition state. For systems with many conformers, the program can evaluate each of the elementary reaction rate constants by multipath canonical VTST or multi-structural VTST. Moreover, the reactant can be unimolecular or bimolecular. Torsional anharmonicity can be incorporated through either the MSTor or the Q2DTor programs. Dual-level calculations are also available in Pilgrim: automatic high-level single-point energies can be used to correct the energy of reactants, transition states, products, and MEP points using the interpolated single-point energies (ISPE) algorithm. When the rate constants of all the chemical processes of interest are known, by means of their calculation using Pilgrim or alternatively through analytical fits to the rate constants as functions of temperature, it is possible to simulate a multistep mechanism under specified laboratory conditions using KMC. Finally, this algorithm allows performing a kinetic simulation to monitor the evolution of each chemical species with time and obtain the product yields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

How to calculate the rate constants for nonradiative transitions between the M S components of spin multiplets?

Predicting the rates of spin-dependent processes characterized by nonradiative transitions between electronic states with different spin multiplicities is important for understanding the mechanisms of many photochemical and catalytic reactions. To calculate these rates, it is necessary to define the spin state representation and the couplings between these states that drives the interstate transitions. In this work, we describe three different approaches to calculating the spin-orbit coupling (SOC), transition probabilities, and rate constants between the MS components of the electronic states with different spin multiplicities. We implemented these approaches in our nonadiabatic statistical theory (NAST) software package, which predicts the transition probabilities and rate constants of spin-dependent processes using information obtained from electronic structure calculations. Here, we discuss the advantage and drawbacks of each approach and, as an example, calculate the rate constants for transitions between the spin states in the active site model of the protein rubredoxin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

The Rate Constant for the Reaction H + C2H5 at T = 295 - 150K

The reaction between the hydrogen atom and the ethyl (C2H3) radical is predicted by photochemical modeling to be the most important loss process for C2H5 radicals in the atmospheres of Jupiter and Saturn. This reaction is also one of the major sources for the methyl radicals in these atmospheres. These two simplest hydrocarbon radicals are the initial species for the synthesis of larger hydrocarbons. Previous measurements of the rate constant for the H + C2H5 reaction varied by a factor of five at room temperature, and some studies showed a dependence upon temperature while others showed no such dependence. In addition, the previous studies were at higher temperatures and generally higher pressures than that needed for use in planetary atmospheric models. The rate constant for the reaction H + C2H5 has been measured directly at T = 150, 202 and 295 K and at P = 1.0 Torr He for all temperatures and additionally at P = 0.5 and 2.0 Torr He at T = 202 K. The measurements were performed in a discharge - fast flow system. The decay of the C2H5 radical in the presence of excess hydrogen was monitored by low-energy electron impact mass spectrometry under pseudo-first order conditions. H atoms and C2H5 radicals were generated rapidly and simultaneously by the reaction of fluorine atoms with H2 and C2H6, respectively. The total rate constant was found to be temperature and pressure independent. The measured total rate constant at each temperature are: k(sub 1)(295K) = (1.02+/-0.24)x10(exp -10), k(sub 1)(202K) = (1.02+/-0.22)x10(exp -10) and k(sub 1)(150K) = (0.93+/-0.21)x10(exp -10), all in units of cu cm/molecule/s. The total rate constant derived from all the combined measurements is k(sub 1) = (l.03+/-0.17)x10(exp -10) cu cm/molecule/s. At room temperature our results are about a factor of two higher than the recommended rate constant and a factor of three lower than the most recently published study.

Pimentel, Andre S.↗
NASA NTRS1982

Rate constant for the reaction between OH and CS2 at 298 and 520 K

In an attempt to resolve discrepancies between published values of the rate constant for the reaction between the hydroxyl radical and carbon disulfide, the reaction has been studied in a discharge flow system by using resonance fluorescence for kinetic measurements and mass spectrometry for product analysis. On the basis of the measured rate constant for disappearance of OH, and measurements of the amount of carbonyl sulfide formed, it was estimated that for the reaction HO + CS2 yields HS + OCS, rate constant values are not greater than 3 x 10 to the -15th/cu cm per sec at 520 K and not greater than 7 x 10 to the -15th/cu cm per sec at 298 K, upper limits are specified because of the inability to isolate exclusively this reaction channel, and because of possible involvement of wall reactions. These results confirm the low values found for this rate constant in two very recent studies.

Leu, M.-T.↗
NASA NTRS1978

Temperature dependence of the rate constants for reactions of O/1D/ atoms with a number of halocarbons

Results are reported for an experimental study of the reactions of O(1D) with CCl4, CFCl3, CF2Cl2, CHFCl2, CHF2Cl, and CF2ClCFCl2 over the temperature range from 173 to 343 K, based on the time-resolved emission of O(1D) at 630 nm. The experiments involved photolysis of O3 by Nd-YAG laser pulses and measurements of 630-nm emission intensity in mixtures with He and the various halocarbons. Pseudo-first-order rate constants are derived from plots of the logarithms of the 630-nm emission intensities as a function of time for particular He/O3/halocarbon mixtures, and second-order rate constants are then obtained from plots of these pseudo-first-order rate constants as a function of halocarbon concentration at constant He and O3 concentrations. No temperature dependence of the second-order rate constants is observed over the range studied, within the precision of the measurements. It is found that the rate constants decrease as H is substituted for Cl in a halocarbon molecule and as F is substituted for H or Cl.

Davidson, J. A.↗
DOE OSTI2022

Shock tube/laser absorption measurement of the rate constant of the reaction: H 2 O 2 + CO 2 2OH + CO 2

We address the role of the linear mixing rule in the kinetics of the H 2 O 2 decomposition system by reporting the rate constant for H 2 O 2 + M = 2OH + M (M = Ar and CO 2 ) in the temperature range of 1087-1234 K at low pressures in a mixture of 20% CO 2 in Argon. The reaction rate constant was inferred from H 2 O concentrations monitored by using a laser-absorption spectroscopy-based water diagnostic. To the best of our knowledge, this is the first measurement of the rate constant of this reaction in a mixture to be reported in literature. A significant discrepancy was found between the rate constants derived using the traditional linear mixing rule and the reduced pressure linear mixing rule. Furthermore, this discrepancy can have serious implications on the predictive accuracy of these kinetic models, especially under conditions relevant to the operation of supercritical CO 2 (sCO 2 ) power cycles that rely on oxy-fuel combustion in a working fluid comprised almost entirely of CO 2 .

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1980

Pressure dependence of the absolute rate constant for the reaction OH + C2H2 from 228 to 413K

The pressure dependence of absolute rate constants for the reaction of OH + C2H2 yields products has been examined at five temperatures ranging from 228 to 413 K. The experimental techniques which was used is flash photolysis-resonance fluoresence. OH was produced by water photolysis and hydroxyl resonance fluorescent photons were measured by multiscaling techniques. The results indicate that the low pressure bimolecular rate constant is 4 x 10 the the minus 13th power cu cm molecule (-1) s(-1) over the temperature range studied. A substantial increase in the bimolecular rate constant with an increase in pressure was observed at all temperatures except 228 K. This indicates the importance of initial adduct formation and subsequent stablization. The high pressure results are well represented by the Arrhenius expression (k sub bi) sub infinity = (6.83 + or - 1.19) x 10 to the minus 12th power exp(-646 + or - 47/T)cu cm molecule (-1) s(-1). The results are compared to previous investigated and are theoretically discussed. The implications of these results on modeling of terrestrial and planetary atmospheres and also in combustion chemistry are discussed.

Michael, J. V.↗
NASA NTRS1983

The reaction NH2 + PH3 yields NH3 + PH2 - Absolute rate constant measurement and implication for NH3 and PH3 photochemistry in the atmosphere of Jupiter

The rate constant is measured over the temperature interval 218-456 K using the technique of flash photolysis-laser-induced fluorescence. NH2 radicals are produced by the flash photolysis of ammonia highly diluted in argon, and the decay of fluorescent NH2 photons is measured by multiscaling techniques. For each of the five temperatures employed in the study, the results are shown to be indepenent of variations in PH3 concentration, total pressure (argon), and flash intensity. It is found that the rate constant results are best represented for T between 218 and 456 K by the expression k = (1.52 + or - 0.16) x 10 to the -12th exp(-928 + or - 56/T) cu cm per molecule per sec; the error quoted is 1 standard deviation. This is the first determination of the rate constant for the reaction NH2 + PH3. The data are compared with an estimate made in order to explain results of the radiolysis of NH3-PH3 mixtures. The Arrhenius parameters determined here for NH2 + PH3 are then contrasted with those for the corresponding reactions of H and OH with PH3.

Bosco, S. R.↗
NASA NTRS1983

The reaction NH2 + PH3 yields NH3 + PH2: Absolute rate constant measurement and implication for NH3 and PH3 photochemistry in the atmosphere of Jupiter

The rate constant is measured over the temperature interval 218-456 K using the technique of flash photolysis-laser-induced fluorescence. NH2 radicals are produced by the flash photolysis of ammonia highly diluted in argon, and the decay of fluorescent NH2 photons is measured by multiscaling techniques. For each of the five temperatures employed in the study, the results are shown to be independent of variations in PH3 concentration, total pressure (argon), and flash intensity. It is found that the rate constant results are best represented for T between 218 and 456 K by the expression k = (1.52 + or - 0.16) x 10 to the -12th exp(-928 + or - 56/T) cu cm per molecule per sec; the error quoted is 1 standard deviation. This is the first determination of the rate constant for the reaction NH2 + PH3. The data are compared with an estimate made in order to explain results of the radiolysis of NH3-PH3 mixtures. The Arrhenius parameters determined here for NH2 + PH3 are then constrasted with those for the corresponding reactions of H and OH with PH3.

Bosco, S. R.↗
NASA NTRS1989

Comparison of experimental and calculated attachment rate constants for CFCl3 and CCl4 in the temperature range 294-500 K

Electron-attachment cross sections and rate constants have been measured and calculated for the dissociative attachment processes e + CFCl3 - Cl(-) + CFCl2 and e + CCl4 - Cl(-) + CCl3. Good agreement over the electron-energy range 1-200 meV is found in energy dependence between present calculated cross sections and experimental cross sections at 300 K. The same calculation, with suitable adjustment of thermal populations, was used to calculate electron-attachment rate constants in the range 50-600 K. Experimental rate constants for CFCl3 and CCl4 were measured at temperatures of 294, 404, and 496 K (CFCl3) and 294, 400, and 500 K (CCl4) using the Cavalleri electron-density sampling method. Good agreement is found between present measurements and calculations, poor agreement with flowing-afterglow Langmuir-probe (FALP) data in CFCl3 at the higher temperatures, and reasonable agreement with FALP data for CCl4.

Orient, O. J.↗
NASA NTRS1979

Rate constant for the reaction of atomic chlorine with formaldehyde from 200 to 500 K

The absolute rate constant for the reaction of atomic chlorine with formaldehyde has been measured from 200 to 500 K using the flash photolysis-resonance fluorescence technique. The results were independent of substantial variations in (H2CO), total pressure (Ar), and flash intensity (i.e., initial (Cl)). The rate constant was shown to be invariant with temperature, the best representation for this temperature range being k-sub-1 = (7.48 + or - 0.50) times 10 to the -11 cu cm/molecule sec, where the error is one standard deviation. This result is compared with the only previous determination of k-sub-1, which was a relative value obtained at 298 K. The rate constant is theoretically discussed, and the potential importance of the reaction in stratospheric chemistry is considered.

Michael, J. V.↗
NASA NTRS2022

Radiation-induced D/H Exchange Rate Constants in Aliphatics Embedded in Water Ice

Gas-phase and solid-state chemistry in low-temperature interstellar clouds and cores leads to a D/H enhancement in interstellar ices, which is eventually inherited by comets, meteorites, and even planetary satellites. Hence, the D/H ratio has been widely used as a tracer for the origins of extraterrestrial chemistry. However, the D/H ratio can also be influenced by cosmic rays, which are ubiquitous and can penetrate even dense interstellar molecular cores. The effects of such high-energy radiation on deuterium fractionation have not been studied in a quantitative manner. In this study, we present rate constants for radiation-induced D-to-H exchange for fully deuterated small (1–2 C) hydrocarbons embedded in H2O ice at 20 K and H-to-D exchange for the protiated forms of these molecules in D2O ice at 20 K. We observed larger rate constants for H-to-D exchange in the D2O ice versus D-to-H exchange in H2O ice, which we have attributed to the greater bond strength of C–D versus C–H. We find that the H-to-D exchange rate constants are smaller for protiated methane than ethane, in agreement with bond energies from the literature. We are unable to obtain rate constants for the unsaturated and reactive hydrocarbons ethylene and acetylene. Interpretation of the rate constants suggest that D/H exchange products are formed in abundance alongside radiolysis products. We discuss how our quantitative and qualitative data can be used to interpret the D/H ratios of aliphatic compounds observed throughout space.

Ice destruction↗
NASA NTRS1980

Pressure dependence of the absolute rate constant for the reaction OH + C2H2 from 228 to 413 K

The pressure dependence of the absolute rate constant for the reaction of the hydroxyl radical with acetylene, important in both atmospheric and combustion chemistry, is determined for temperatures between 228 and 413 K. The flash photolysis-resonance fluorescence technique was employed at five temperatures over wide ranges of pressure and acetylene concentrations, with the OH produced by water photolysis and hydroxyl resonance fluorescent photons measured by multiscaling techniques. Results indicate that, except at the lowest temperature, the bimolecular rate constant for the reaction depends strongly on total pressure, with the pressure effect becoming more pronounced with increasing temperature. At limiting high pressures, the rate constant is found to be equal to 6.83 + or - 1.19 x 10 to the -12th exp (-646 + or - 47/T) cu cm/molecule per sec, where T is the temperature. Results thus demonstrate the importance of environmental conditions in theoretical studies of atmospheric and combustion product compositions

Michael, J. V.↗
NASA NTRS1968

Rate constants measured for hydrated electron reactions with peptides and proteins

Effects of ionizing radiation on the amino acids of proteins and the reactivity of the protonated amino group depends upon the pK subscript a of the group. Estimates of the rate constants for reactions involving the amino acid side chains are presented. These rate constants gave an approximate rate constant for three different protein molecules.

Braams, R.↗